+++ /dev/null
-/*
- * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
- * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#ifndef _IPATH_COMMON_H
-#define _IPATH_COMMON_H
-
-/*
- * This file contains defines, structures, etc. that are used
- * to communicate between kernel and user code.
- */
-
-
-/* This is the IEEE-assigned OUI for QLogic Inc. InfiniPath */
-#define IPATH_SRC_OUI_1 0x00
-#define IPATH_SRC_OUI_2 0x11
-#define IPATH_SRC_OUI_3 0x75
-
-/* version of protocol header (known to chip also). In the long run,
- * we should be able to generate and accept a range of version numbers;
- * for now we only accept one, and it's compiled in.
- */
-#define IPS_PROTO_VERSION 2
-
-/*
- * These are compile time constants that you may want to enable or disable
- * if you are trying to debug problems with code or performance.
- * IPATH_VERBOSE_TRACING define as 1 if you want additional tracing in
- * fastpath code
- * IPATH_TRACE_REGWRITES define as 1 if you want register writes to be
- * traced in faspath code
- * _IPATH_TRACING define as 0 if you want to remove all tracing in a
- * compilation unit
- * _IPATH_DEBUGGING define as 0 if you want to remove debug prints
- */
-
-/*
- * The value in the BTH QP field that InfiniPath uses to differentiate
- * an infinipath protocol IB packet vs standard IB transport
- */
-#define IPATH_KD_QP 0x656b79
-
-/*
- * valid states passed to ipath_set_linkstate() user call
- */
-#define IPATH_IB_LINKDOWN 0
-#define IPATH_IB_LINKARM 1
-#define IPATH_IB_LINKACTIVE 2
-#define IPATH_IB_LINKDOWN_ONLY 3
-#define IPATH_IB_LINKDOWN_SLEEP 4
-#define IPATH_IB_LINKDOWN_DISABLE 5
-#define IPATH_IB_LINK_LOOPBACK 6 /* enable local loopback */
-#define IPATH_IB_LINK_EXTERNAL 7 /* normal, disable local loopback */
-#define IPATH_IB_LINK_NO_HRTBT 8 /* disable Heartbeat, e.g. for loopback */
-#define IPATH_IB_LINK_HRTBT 9 /* enable heartbeat, normal, non-loopback */
-
-/*
- * These 3 values (SDR and DDR may be ORed for auto-speed
- * negotiation) are used for the 3rd argument to path_f_set_ib_cfg
- * with cmd IPATH_IB_CFG_SPD_ENB, by direct calls or via sysfs. They
- * are also the the possible values for ipath_link_speed_enabled and active
- * The values were chosen to match values used within the IB spec.
- */
-#define IPATH_IB_SDR 1
-#define IPATH_IB_DDR 2
-
-/*
- * stats maintained by the driver. For now, at least, this is global
- * to all minor devices.
- */
-struct infinipath_stats {
- /* number of interrupts taken */
- __u64 sps_ints;
- /* number of interrupts for errors */
- __u64 sps_errints;
- /* number of errors from chip (not incl. packet errors or CRC) */
- __u64 sps_errs;
- /* number of packet errors from chip other than CRC */
- __u64 sps_pkterrs;
- /* number of packets with CRC errors (ICRC and VCRC) */
- __u64 sps_crcerrs;
- /* number of hardware errors reported (parity, etc.) */
- __u64 sps_hwerrs;
- /* number of times IB link changed state unexpectedly */
- __u64 sps_iblink;
- __u64 sps_unused; /* was fastrcvint, no longer implemented */
- /* number of kernel (port0) packets received */
- __u64 sps_port0pkts;
- /* number of "ethernet" packets sent by driver */
- __u64 sps_ether_spkts;
- /* number of "ethernet" packets received by driver */
- __u64 sps_ether_rpkts;
- /* number of SMA packets sent by driver. Obsolete. */
- __u64 sps_sma_spkts;
- /* number of SMA packets received by driver. Obsolete. */
- __u64 sps_sma_rpkts;
- /* number of times all ports rcvhdrq was full and packet dropped */
- __u64 sps_hdrqfull;
- /* number of times all ports egrtid was full and packet dropped */
- __u64 sps_etidfull;
- /*
- * number of times we tried to send from driver, but no pio buffers
- * avail
- */
- __u64 sps_nopiobufs;
- /* number of ports currently open */
- __u64 sps_ports;
- /* list of pkeys (other than default) accepted (0 means not set) */
- __u16 sps_pkeys[4];
- __u16 sps_unused16[4]; /* available; maintaining compatible layout */
- /* number of user ports per chip (not IB ports) */
- __u32 sps_nports;
- /* not our interrupt, or already handled */
- __u32 sps_nullintr;
- /* max number of packets handled per receive call */
- __u32 sps_maxpkts_call;
- /* avg number of packets handled per receive call */
- __u32 sps_avgpkts_call;
- /* total number of pages locked */
- __u64 sps_pagelocks;
- /* total number of pages unlocked */
- __u64 sps_pageunlocks;
- /*
- * Number of packets dropped in kernel other than errors (ether
- * packets if ipath not configured, etc.)
- */
- __u64 sps_krdrops;
- __u64 sps_txeparity; /* PIO buffer parity error, recovered */
- /* pad for future growth */
- __u64 __sps_pad[45];
-};
-
-/*
- * These are the status bits readable (in ascii form, 64bit value)
- * from the "status" sysfs file.
- */
-#define IPATH_STATUS_INITTED 0x1 /* basic initialization done */
-#define IPATH_STATUS_DISABLED 0x2 /* hardware disabled */
-/* Device has been disabled via admin request */
-#define IPATH_STATUS_ADMIN_DISABLED 0x4
-/* Chip has been found and initted */
-#define IPATH_STATUS_CHIP_PRESENT 0x20
-/* IB link is at ACTIVE, usable for data traffic */
-#define IPATH_STATUS_IB_READY 0x40
-/* link is configured, LID, MTU, etc. have been set */
-#define IPATH_STATUS_IB_CONF 0x80
-/* no link established, probably no cable */
-#define IPATH_STATUS_IB_NOCABLE 0x100
-/* A Fatal hardware error has occurred. */
-#define IPATH_STATUS_HWERROR 0x200
-
-/*
- * The list of usermode accessible registers. Also see Reg_* later in file.
- */
-typedef enum _ipath_ureg {
- /* (RO) DMA RcvHdr to be used next. */
- ur_rcvhdrtail = 0,
- /* (RW) RcvHdr entry to be processed next by host. */
- ur_rcvhdrhead = 1,
- /* (RO) Index of next Eager index to use. */
- ur_rcvegrindextail = 2,
- /* (RW) Eager TID to be processed next */
- ur_rcvegrindexhead = 3,
- /* For internal use only; max register number. */
- _IPATH_UregMax
-} ipath_ureg;
-
-/* bit values for spi_runtime_flags */
-#define IPATH_RUNTIME_HT 0x1
-#define IPATH_RUNTIME_PCIE 0x2
-#define IPATH_RUNTIME_FORCE_WC_ORDER 0x4
-#define IPATH_RUNTIME_RCVHDR_COPY 0x8
-#define IPATH_RUNTIME_MASTER 0x10
-#define IPATH_RUNTIME_NODMA_RTAIL 0x80
-#define IPATH_RUNTIME_SDMA 0x200
-#define IPATH_RUNTIME_FORCE_PIOAVAIL 0x400
-#define IPATH_RUNTIME_PIO_REGSWAPPED 0x800
-
-/*
- * This structure is returned by ipath_userinit() immediately after
- * open to get implementation-specific info, and info specific to this
- * instance.
- *
- * This struct must have explict pad fields where type sizes
- * may result in different alignments between 32 and 64 bit
- * programs, since the 64 bit * bit kernel requires the user code
- * to have matching offsets
- */
-struct ipath_base_info {
- /* version of hardware, for feature checking. */
- __u32 spi_hw_version;
- /* version of software, for feature checking. */
- __u32 spi_sw_version;
- /* InfiniPath port assigned, goes into sent packets */
- __u16 spi_port;
- __u16 spi_subport;
- /*
- * IB MTU, packets IB data must be less than this.
- * The MTU is in bytes, and will be a multiple of 4 bytes.
- */
- __u32 spi_mtu;
- /*
- * Size of a PIO buffer. Any given packet's total size must be less
- * than this (in words). Included is the starting control word, so
- * if 513 is returned, then total pkt size is 512 words or less.
- */
- __u32 spi_piosize;
- /* size of the TID cache in infinipath, in entries */
- __u32 spi_tidcnt;
- /* size of the TID Eager list in infinipath, in entries */
- __u32 spi_tidegrcnt;
- /* size of a single receive header queue entry in words. */
- __u32 spi_rcvhdrent_size;
- /*
- * Count of receive header queue entries allocated.
- * This may be less than the spu_rcvhdrcnt passed in!.
- */
- __u32 spi_rcvhdr_cnt;
-
- /* per-chip and other runtime features bitmap (IPATH_RUNTIME_*) */
- __u32 spi_runtime_flags;
-
- /* address where receive buffer queue is mapped into */
- __u64 spi_rcvhdr_base;
-
- /* user program. */
-
- /* base address of eager TID receive buffers. */
- __u64 spi_rcv_egrbufs;
-
- /* Allocated by initialization code, not by protocol. */
-
- /*
- * Size of each TID buffer in host memory, starting at
- * spi_rcv_egrbufs. The buffers are virtually contiguous.
- */
- __u32 spi_rcv_egrbufsize;
- /*
- * The special QP (queue pair) value that identifies an infinipath
- * protocol packet from standard IB packets. More, probably much
- * more, to be added.
- */
- __u32 spi_qpair;
-
- /*
- * User register base for init code, not to be used directly by
- * protocol or applications.
- */
- __u64 __spi_uregbase;
- /*
- * Maximum buffer size in bytes that can be used in a single TID
- * entry (assuming the buffer is aligned to this boundary). This is
- * the minimum of what the hardware and software support Guaranteed
- * to be a power of 2.
- */
- __u32 spi_tid_maxsize;
- /*
- * alignment of each pio send buffer (byte count
- * to add to spi_piobufbase to get to second buffer)
- */
- __u32 spi_pioalign;
- /*
- * The index of the first pio buffer available to this process;
- * needed to do lookup in spi_pioavailaddr; not added to
- * spi_piobufbase.
- */
- __u32 spi_pioindex;
- /* number of buffers mapped for this process */
- __u32 spi_piocnt;
-
- /*
- * Base address of writeonly pio buffers for this process.
- * Each buffer has spi_piosize words, and is aligned on spi_pioalign
- * boundaries. spi_piocnt buffers are mapped from this address
- */
- __u64 spi_piobufbase;
-
- /*
- * Base address of readonly memory copy of the pioavail registers.
- * There are 2 bits for each buffer.
- */
- __u64 spi_pioavailaddr;
-
- /*
- * Address where driver updates a copy of the interface and driver
- * status (IPATH_STATUS_*) as a 64 bit value. It's followed by a
- * string indicating hardware error, if there was one.
- */
- __u64 spi_status;
-
- /* number of chip ports available to user processes */
- __u32 spi_nports;
- /* unit number of chip we are using */
- __u32 spi_unit;
- /* num bufs in each contiguous set */
- __u32 spi_rcv_egrperchunk;
- /* size in bytes of each contiguous set */
- __u32 spi_rcv_egrchunksize;
- /* total size of mmap to cover full rcvegrbuffers */
- __u32 spi_rcv_egrbuftotlen;
- __u32 spi_filler_for_align;
- /* address of readonly memory copy of the rcvhdrq tail register. */
- __u64 spi_rcvhdr_tailaddr;
-
- /* shared memory pages for subports if port is shared */
- __u64 spi_subport_uregbase;
- __u64 spi_subport_rcvegrbuf;
- __u64 spi_subport_rcvhdr_base;
-
- /* shared memory page for hardware port if it is shared */
- __u64 spi_port_uregbase;
- __u64 spi_port_rcvegrbuf;
- __u64 spi_port_rcvhdr_base;
- __u64 spi_port_rcvhdr_tailaddr;
-
-} __attribute__ ((aligned(8)));
-
-
-/*
- * This version number is given to the driver by the user code during
- * initialization in the spu_userversion field of ipath_user_info, so
- * the driver can check for compatibility with user code.
- *
- * The major version changes when data structures
- * change in an incompatible way. The driver must be the same or higher
- * for initialization to succeed. In some cases, a higher version
- * driver will not interoperate with older software, and initialization
- * will return an error.
- */
-#define IPATH_USER_SWMAJOR 1
-
-/*
- * Minor version differences are always compatible
- * a within a major version, however if user software is larger
- * than driver software, some new features and/or structure fields
- * may not be implemented; the user code must deal with this if it
- * cares, or it must abort after initialization reports the difference.
- */
-#define IPATH_USER_SWMINOR 6
-
-#define IPATH_USER_SWVERSION ((IPATH_USER_SWMAJOR<<16) | IPATH_USER_SWMINOR)
-
-#define IPATH_KERN_TYPE 0
-
-/*
- * Similarly, this is the kernel version going back to the user. It's
- * slightly different, in that we want to tell if the driver was built as
- * part of a QLogic release, or from the driver from openfabrics.org,
- * kernel.org, or a standard distribution, for support reasons.
- * The high bit is 0 for non-QLogic and 1 for QLogic-built/supplied.
- *
- * It's returned by the driver to the user code during initialization in the
- * spi_sw_version field of ipath_base_info, so the user code can in turn
- * check for compatibility with the kernel.
-*/
-#define IPATH_KERN_SWVERSION ((IPATH_KERN_TYPE<<31) | IPATH_USER_SWVERSION)
-
-/*
- * This structure is passed to ipath_userinit() to tell the driver where
- * user code buffers are, sizes, etc. The offsets and sizes of the
- * fields must remain unchanged, for binary compatibility. It can
- * be extended, if userversion is changed so user code can tell, if needed
- */
-struct ipath_user_info {
- /*
- * version of user software, to detect compatibility issues.
- * Should be set to IPATH_USER_SWVERSION.
- */
- __u32 spu_userversion;
-
- /* desired number of receive header queue entries */
- __u32 spu_rcvhdrcnt;
-
- /* size of struct base_info to write to */
- __u32 spu_base_info_size;
-
- /*
- * number of words in KD protocol header
- * This tells InfiniPath how many words to copy to rcvhdrq. If 0,
- * kernel uses a default. Once set, attempts to set any other value
- * are an error (EAGAIN) until driver is reloaded.
- */
- __u32 spu_rcvhdrsize;
-
- /*
- * If two or more processes wish to share a port, each process
- * must set the spu_subport_cnt and spu_subport_id to the same
- * values. The only restriction on the spu_subport_id is that
- * it be unique for a given node.
- */
- __u16 spu_subport_cnt;
- __u16 spu_subport_id;
-
- __u32 spu_unused; /* kept for compatible layout */
-
- /*
- * address of struct base_info to write to
- */
- __u64 spu_base_info;
-
-} __attribute__ ((aligned(8)));
-
-/* User commands. */
-
-#define IPATH_CMD_MIN 16
-
-#define __IPATH_CMD_USER_INIT 16 /* old set up userspace (for old user code) */
-#define IPATH_CMD_PORT_INFO 17 /* find out what resources we got */
-#define IPATH_CMD_RECV_CTRL 18 /* control receipt of packets */
-#define IPATH_CMD_TID_UPDATE 19 /* update expected TID entries */
-#define IPATH_CMD_TID_FREE 20 /* free expected TID entries */
-#define IPATH_CMD_SET_PART_KEY 21 /* add partition key */
-#define __IPATH_CMD_SLAVE_INFO 22 /* return info on slave processes (for old user code) */
-#define IPATH_CMD_ASSIGN_PORT 23 /* allocate HCA and port */
-#define IPATH_CMD_USER_INIT 24 /* set up userspace */
-#define IPATH_CMD_UNUSED_1 25
-#define IPATH_CMD_UNUSED_2 26
-#define IPATH_CMD_PIOAVAILUPD 27 /* force an update of PIOAvail reg */
-#define IPATH_CMD_POLL_TYPE 28 /* set the kind of polling we want */
-#define IPATH_CMD_ARMLAUNCH_CTRL 29 /* armlaunch detection control */
-/* 30 is unused */
-#define IPATH_CMD_SDMA_INFLIGHT 31 /* sdma inflight counter request */
-#define IPATH_CMD_SDMA_COMPLETE 32 /* sdma completion counter request */
-
-/*
- * Poll types
- */
-#define IPATH_POLL_TYPE_URGENT 0x01
-#define IPATH_POLL_TYPE_OVERFLOW 0x02
-
-struct ipath_port_info {
- __u32 num_active; /* number of active units */
- __u32 unit; /* unit (chip) assigned to caller */
- __u16 port; /* port on unit assigned to caller */
- __u16 subport; /* subport on unit assigned to caller */
- __u16 num_ports; /* number of ports available on unit */
- __u16 num_subports; /* number of subports opened on port */
-};
-
-struct ipath_tid_info {
- __u32 tidcnt;
- /* make structure same size in 32 and 64 bit */
- __u32 tid__unused;
- /* virtual address of first page in transfer */
- __u64 tidvaddr;
- /* pointer (same size 32/64 bit) to __u16 tid array */
- __u64 tidlist;
-
- /*
- * pointer (same size 32/64 bit) to bitmap of TIDs used
- * for this call; checked for being large enough at open
- */
- __u64 tidmap;
-};
-
-struct ipath_cmd {
- __u32 type; /* command type */
- union {
- struct ipath_tid_info tid_info;
- struct ipath_user_info user_info;
-
- /*
- * address in userspace where we should put the sdma
- * inflight counter
- */
- __u64 sdma_inflight;
- /*
- * address in userspace where we should put the sdma
- * completion counter
- */
- __u64 sdma_complete;
- /* address in userspace of struct ipath_port_info to
- write result to */
- __u64 port_info;
- /* enable/disable receipt of packets */
- __u32 recv_ctrl;
- /* enable/disable armlaunch errors (non-zero to enable) */
- __u32 armlaunch_ctrl;
- /* partition key to set */
- __u16 part_key;
- /* user address of __u32 bitmask of active slaves */
- __u64 slave_mask_addr;
- /* type of polling we want */
- __u16 poll_type;
- } cmd;
-};
-
-struct ipath_iovec {
- /* Pointer to data, but same size 32 and 64 bit */
- __u64 iov_base;
-
- /*
- * Length of data; don't need 64 bits, but want
- * ipath_sendpkt to remain same size as before 32 bit changes, so...
- */
- __u64 iov_len;
-};
-
-/*
- * Describes a single packet for send. Each packet can have one or more
- * buffers, but the total length (exclusive of IB headers) must be less
- * than the MTU, and if using the PIO method, entire packet length,
- * including IB headers, must be less than the ipath_piosize value (words).
- * Use of this necessitates including sys/uio.h
- */
-struct __ipath_sendpkt {
- __u32 sps_flags; /* flags for packet (TBD) */
- __u32 sps_cnt; /* number of entries to use in sps_iov */
- /* array of iov's describing packet. TEMPORARY */
- struct ipath_iovec sps_iov[4];
-};
-
-/*
- * diagnostics can send a packet by "writing" one of the following
- * two structs to diag data special file
- * The first is the legacy version for backward compatibility
- */
-struct ipath_diag_pkt {
- __u32 unit;
- __u64 data;
- __u32 len;
-};
-
-/* The second diag_pkt struct is the expanded version that allows
- * more control over the packet, specifically, by allowing a custom
- * pbc (+ static rate) qword, so that special modes and deliberate
- * changes to CRCs can be used. The elements were also re-ordered
- * for better alignment and to avoid padding issues.
- */
-struct ipath_diag_xpkt {
- __u64 data;
- __u64 pbc_wd;
- __u32 unit;
- __u32 len;
-};
-
-/*
- * Data layout in I2C flash (for GUID, etc.)
- * All fields are little-endian binary unless otherwise stated
- */
-#define IPATH_FLASH_VERSION 2
-struct ipath_flash {
- /* flash layout version (IPATH_FLASH_VERSION) */
- __u8 if_fversion;
- /* checksum protecting if_length bytes */
- __u8 if_csum;
- /*
- * valid length (in use, protected by if_csum), including
- * if_fversion and if_csum themselves)
- */
- __u8 if_length;
- /* the GUID, in network order */
- __u8 if_guid[8];
- /* number of GUIDs to use, starting from if_guid */
- __u8 if_numguid;
- /* the (last 10 characters of) board serial number, in ASCII */
- char if_serial[12];
- /* board mfg date (YYYYMMDD ASCII) */
- char if_mfgdate[8];
- /* last board rework/test date (YYYYMMDD ASCII) */
- char if_testdate[8];
- /* logging of error counts, TBD */
- __u8 if_errcntp[4];
- /* powered on hours, updated at driver unload */
- __u8 if_powerhour[2];
- /* ASCII free-form comment field */
- char if_comment[32];
- /* Backwards compatible prefix for longer QLogic Serial Numbers */
- char if_sprefix[4];
- /* 82 bytes used, min flash size is 128 bytes */
- __u8 if_future[46];
-};
-
-/*
- * These are the counters implemented in the chip, and are listed in order.
- * The InterCaps naming is taken straight from the chip spec.
- */
-struct infinipath_counters {
- __u64 LBIntCnt;
- __u64 LBFlowStallCnt;
- __u64 TxSDmaDescCnt; /* was Reserved1 */
- __u64 TxUnsupVLErrCnt;
- __u64 TxDataPktCnt;
- __u64 TxFlowPktCnt;
- __u64 TxDwordCnt;
- __u64 TxLenErrCnt;
- __u64 TxMaxMinLenErrCnt;
- __u64 TxUnderrunCnt;
- __u64 TxFlowStallCnt;
- __u64 TxDroppedPktCnt;
- __u64 RxDroppedPktCnt;
- __u64 RxDataPktCnt;
- __u64 RxFlowPktCnt;
- __u64 RxDwordCnt;
- __u64 RxLenErrCnt;
- __u64 RxMaxMinLenErrCnt;
- __u64 RxICRCErrCnt;
- __u64 RxVCRCErrCnt;
- __u64 RxFlowCtrlErrCnt;
- __u64 RxBadFormatCnt;
- __u64 RxLinkProblemCnt;
- __u64 RxEBPCnt;
- __u64 RxLPCRCErrCnt;
- __u64 RxBufOvflCnt;
- __u64 RxTIDFullErrCnt;
- __u64 RxTIDValidErrCnt;
- __u64 RxPKeyMismatchCnt;
- __u64 RxP0HdrEgrOvflCnt;
- __u64 RxP1HdrEgrOvflCnt;
- __u64 RxP2HdrEgrOvflCnt;
- __u64 RxP3HdrEgrOvflCnt;
- __u64 RxP4HdrEgrOvflCnt;
- __u64 RxP5HdrEgrOvflCnt;
- __u64 RxP6HdrEgrOvflCnt;
- __u64 RxP7HdrEgrOvflCnt;
- __u64 RxP8HdrEgrOvflCnt;
- __u64 RxP9HdrEgrOvflCnt; /* was Reserved6 */
- __u64 RxP10HdrEgrOvflCnt; /* was Reserved7 */
- __u64 RxP11HdrEgrOvflCnt; /* new for IBA7220 */
- __u64 RxP12HdrEgrOvflCnt; /* new for IBA7220 */
- __u64 RxP13HdrEgrOvflCnt; /* new for IBA7220 */
- __u64 RxP14HdrEgrOvflCnt; /* new for IBA7220 */
- __u64 RxP15HdrEgrOvflCnt; /* new for IBA7220 */
- __u64 RxP16HdrEgrOvflCnt; /* new for IBA7220 */
- __u64 IBStatusChangeCnt;
- __u64 IBLinkErrRecoveryCnt;
- __u64 IBLinkDownedCnt;
- __u64 IBSymbolErrCnt;
- /* The following are new for IBA7220 */
- __u64 RxVL15DroppedPktCnt;
- __u64 RxOtherLocalPhyErrCnt;
- __u64 PcieRetryBufDiagQwordCnt;
- __u64 ExcessBufferOvflCnt;
- __u64 LocalLinkIntegrityErrCnt;
- __u64 RxVlErrCnt;
- __u64 RxDlidFltrCnt;
-};
-
-/*
- * The next set of defines are for packet headers, and chip register
- * and memory bits that are visible to and/or used by user-mode software
- * The other bits that are used only by the driver or diags are in
- * ipath_registers.h
- */
-
-/* RcvHdrFlags bits */
-#define INFINIPATH_RHF_LENGTH_MASK 0x7FF
-#define INFINIPATH_RHF_LENGTH_SHIFT 0
-#define INFINIPATH_RHF_RCVTYPE_MASK 0x7
-#define INFINIPATH_RHF_RCVTYPE_SHIFT 11
-#define INFINIPATH_RHF_EGRINDEX_MASK 0xFFF
-#define INFINIPATH_RHF_EGRINDEX_SHIFT 16
-#define INFINIPATH_RHF_SEQ_MASK 0xF
-#define INFINIPATH_RHF_SEQ_SHIFT 0
-#define INFINIPATH_RHF_HDRQ_OFFSET_MASK 0x7FF
-#define INFINIPATH_RHF_HDRQ_OFFSET_SHIFT 4
-#define INFINIPATH_RHF_H_ICRCERR 0x80000000
-#define INFINIPATH_RHF_H_VCRCERR 0x40000000
-#define INFINIPATH_RHF_H_PARITYERR 0x20000000
-#define INFINIPATH_RHF_H_LENERR 0x10000000
-#define INFINIPATH_RHF_H_MTUERR 0x08000000
-#define INFINIPATH_RHF_H_IHDRERR 0x04000000
-#define INFINIPATH_RHF_H_TIDERR 0x02000000
-#define INFINIPATH_RHF_H_MKERR 0x01000000
-#define INFINIPATH_RHF_H_IBERR 0x00800000
-#define INFINIPATH_RHF_H_ERR_MASK 0xFF800000
-#define INFINIPATH_RHF_L_USE_EGR 0x80000000
-#define INFINIPATH_RHF_L_SWA 0x00008000
-#define INFINIPATH_RHF_L_SWB 0x00004000
-
-/* infinipath header fields */
-#define INFINIPATH_I_VERS_MASK 0xF
-#define INFINIPATH_I_VERS_SHIFT 28
-#define INFINIPATH_I_PORT_MASK 0xF
-#define INFINIPATH_I_PORT_SHIFT 24
-#define INFINIPATH_I_TID_MASK 0x7FF
-#define INFINIPATH_I_TID_SHIFT 13
-#define INFINIPATH_I_OFFSET_MASK 0x1FFF
-#define INFINIPATH_I_OFFSET_SHIFT 0
-
-/* K_PktFlags bits */
-#define INFINIPATH_KPF_INTR 0x1
-#define INFINIPATH_KPF_SUBPORT_MASK 0x3
-#define INFINIPATH_KPF_SUBPORT_SHIFT 1
-
-#define INFINIPATH_MAX_SUBPORT 4
-
-/* SendPIO per-buffer control */
-#define INFINIPATH_SP_TEST 0x40
-#define INFINIPATH_SP_TESTEBP 0x20
-#define INFINIPATH_SP_TRIGGER_SHIFT 15
-
-/* SendPIOAvail bits */
-#define INFINIPATH_SENDPIOAVAIL_BUSY_SHIFT 1
-#define INFINIPATH_SENDPIOAVAIL_CHECK_SHIFT 0
-
-/* infinipath header format */
-struct ipath_header {
- /*
- * Version - 4 bits, Port - 4 bits, TID - 10 bits and Offset -
- * 14 bits before ECO change ~28 Dec 03. After that, Vers 4,
- * Port 4, TID 11, offset 13.
- */
- __le32 ver_port_tid_offset;
- __le16 chksum;
- __le16 pkt_flags;
-};
-
-/* infinipath user message header format.
- * This structure contains the first 4 fields common to all protocols
- * that employ infinipath.
- */
-struct ipath_message_header {
- __be16 lrh[4];
- __be32 bth[3];
- /* fields below this point are in host byte order */
- struct ipath_header iph;
- __u8 sub_opcode;
-};
-
-/* infinipath ethernet header format */
-struct ether_header {
- __be16 lrh[4];
- __be32 bth[3];
- struct ipath_header iph;
- __u8 sub_opcode;
- __u8 cmd;
- __be16 lid;
- __u16 mac[3];
- __u8 frag_num;
- __u8 seq_num;
- __le32 len;
- /* MUST be of word size due to PIO write requirements */
- __le32 csum;
- __le16 csum_offset;
- __le16 flags;
- __u16 first_2_bytes;
- __u8 unused[2]; /* currently unused */
-};
-
-
-/* IB - LRH header consts */
-#define IPATH_LRH_GRH 0x0003 /* 1. word of IB LRH - next header: GRH */
-#define IPATH_LRH_BTH 0x0002 /* 1. word of IB LRH - next header: BTH */
-
-/* misc. */
-#define SIZE_OF_CRC 1
-
-#define IPATH_DEFAULT_P_KEY 0xFFFF
-#define IPATH_PERMISSIVE_LID 0xFFFF
-#define IPATH_AETH_CREDIT_SHIFT 24
-#define IPATH_AETH_CREDIT_MASK 0x1F
-#define IPATH_AETH_CREDIT_INVAL 0x1F
-#define IPATH_PSN_MASK 0xFFFFFF
-#define IPATH_MSN_MASK 0xFFFFFF
-#define IPATH_QPN_MASK 0xFFFFFF
-#define IPATH_MULTICAST_LID_BASE 0xC000
-#define IPATH_EAGER_TID_ID INFINIPATH_I_TID_MASK
-#define IPATH_MULTICAST_QPN 0xFFFFFF
-
-/* Receive Header Queue: receive type (from infinipath) */
-#define RCVHQ_RCV_TYPE_EXPECTED 0
-#define RCVHQ_RCV_TYPE_EAGER 1
-#define RCVHQ_RCV_TYPE_NON_KD 2
-#define RCVHQ_RCV_TYPE_ERROR 3
-
-
-/* sub OpCodes - ith4x */
-#define IPATH_ITH4X_OPCODE_ENCAP 0x81
-#define IPATH_ITH4X_OPCODE_LID_ARP 0x82
-
-#define IPATH_HEADER_QUEUE_WORDS 9
-
-/* functions for extracting fields from rcvhdrq entries for the driver.
- */
-static inline __u32 ipath_hdrget_err_flags(const __le32 * rbuf)
-{
- return __le32_to_cpu(rbuf[1]) & INFINIPATH_RHF_H_ERR_MASK;
-}
-
-static inline __u32 ipath_hdrget_rcv_type(const __le32 * rbuf)
-{
- return (__le32_to_cpu(rbuf[0]) >> INFINIPATH_RHF_RCVTYPE_SHIFT)
- & INFINIPATH_RHF_RCVTYPE_MASK;
-}
-
-static inline __u32 ipath_hdrget_length_in_bytes(const __le32 * rbuf)
-{
- return ((__le32_to_cpu(rbuf[0]) >> INFINIPATH_RHF_LENGTH_SHIFT)
- & INFINIPATH_RHF_LENGTH_MASK) << 2;
-}
-
-static inline __u32 ipath_hdrget_index(const __le32 * rbuf)
-{
- return (__le32_to_cpu(rbuf[0]) >> INFINIPATH_RHF_EGRINDEX_SHIFT)
- & INFINIPATH_RHF_EGRINDEX_MASK;
-}
-
-static inline __u32 ipath_hdrget_seq(const __le32 *rbuf)
-{
- return (__le32_to_cpu(rbuf[1]) >> INFINIPATH_RHF_SEQ_SHIFT)
- & INFINIPATH_RHF_SEQ_MASK;
-}
-
-static inline __u32 ipath_hdrget_offset(const __le32 *rbuf)
-{
- return (__le32_to_cpu(rbuf[1]) >> INFINIPATH_RHF_HDRQ_OFFSET_SHIFT)
- & INFINIPATH_RHF_HDRQ_OFFSET_MASK;
-}
-
-static inline __u32 ipath_hdrget_use_egr_buf(const __le32 *rbuf)
-{
- return __le32_to_cpu(rbuf[0]) & INFINIPATH_RHF_L_USE_EGR;
-}
-
-static inline __u32 ipath_hdrget_ipath_ver(__le32 hdrword)
-{
- return (__le32_to_cpu(hdrword) >> INFINIPATH_I_VERS_SHIFT)
- & INFINIPATH_I_VERS_MASK;
-}
-
-#endif /* _IPATH_COMMON_H */
Code Review / kvmfornfv.git / blobdiff