+++ /dev/null
-/*
- * Copyright (c) 2005 Ammasso, Inc. All rights reserved.
- * Copyright (c) 2005 Open Grid Computing, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/pci.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/inetdevice.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/ethtool.h>
-#include <linux/mii.h>
-#include <linux/if_vlan.h>
-#include <linux/crc32.h>
-#include <linux/in.h>
-#include <linux/ip.h>
-#include <linux/tcp.h>
-#include <linux/init.h>
-#include <linux/dma-mapping.h>
-#include <linux/slab.h>
-#include <linux/prefetch.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/byteorder.h>
-
-#include <rdma/ib_smi.h>
-#include "c2.h"
-#include "c2_provider.h"
-
-MODULE_AUTHOR("Tom Tucker <tom@opengridcomputing.com>");
-MODULE_DESCRIPTION("Ammasso AMSO1100 Low-level iWARP Driver");
-MODULE_LICENSE("Dual BSD/GPL");
-MODULE_VERSION(DRV_VERSION);
-
-static const u32 default_msg = NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK
- | NETIF_MSG_IFUP | NETIF_MSG_IFDOWN;
-
-static int debug = -1; /* defaults above */
-module_param(debug, int, 0);
-MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
-
-static int c2_up(struct net_device *netdev);
-static int c2_down(struct net_device *netdev);
-static int c2_xmit_frame(struct sk_buff *skb, struct net_device *netdev);
-static void c2_tx_interrupt(struct net_device *netdev);
-static void c2_rx_interrupt(struct net_device *netdev);
-static irqreturn_t c2_interrupt(int irq, void *dev_id);
-static void c2_tx_timeout(struct net_device *netdev);
-static int c2_change_mtu(struct net_device *netdev, int new_mtu);
-static void c2_reset(struct c2_port *c2_port);
-
-static struct pci_device_id c2_pci_table[] = {
- { PCI_DEVICE(0x18b8, 0xb001) },
- { 0 }
-};
-
-MODULE_DEVICE_TABLE(pci, c2_pci_table);
-
-static void c2_print_macaddr(struct net_device *netdev)
-{
- pr_debug("%s: MAC %pM, IRQ %u\n", netdev->name, netdev->dev_addr, netdev->irq);
-}
-
-static void c2_set_rxbufsize(struct c2_port *c2_port)
-{
- struct net_device *netdev = c2_port->netdev;
-
- if (netdev->mtu > RX_BUF_SIZE)
- c2_port->rx_buf_size =
- netdev->mtu + ETH_HLEN + sizeof(struct c2_rxp_hdr) +
- NET_IP_ALIGN;
- else
- c2_port->rx_buf_size = sizeof(struct c2_rxp_hdr) + RX_BUF_SIZE;
-}
-
-/*
- * Allocate TX ring elements and chain them together.
- * One-to-one association of adapter descriptors with ring elements.
- */
-static int c2_tx_ring_alloc(struct c2_ring *tx_ring, void *vaddr,
- dma_addr_t base, void __iomem * mmio_txp_ring)
-{
- struct c2_tx_desc *tx_desc;
- struct c2_txp_desc __iomem *txp_desc;
- struct c2_element *elem;
- int i;
-
- tx_ring->start = kmalloc(sizeof(*elem) * tx_ring->count, GFP_KERNEL);
- if (!tx_ring->start)
- return -ENOMEM;
-
- elem = tx_ring->start;
- tx_desc = vaddr;
- txp_desc = mmio_txp_ring;
- for (i = 0; i < tx_ring->count; i++, elem++, tx_desc++, txp_desc++) {
- tx_desc->len = 0;
- tx_desc->status = 0;
-
- /* Set TXP_HTXD_UNINIT */
- __raw_writeq((__force u64) cpu_to_be64(0x1122334455667788ULL),
- (void __iomem *) txp_desc + C2_TXP_ADDR);
- __raw_writew(0, (void __iomem *) txp_desc + C2_TXP_LEN);
- __raw_writew((__force u16) cpu_to_be16(TXP_HTXD_UNINIT),
- (void __iomem *) txp_desc + C2_TXP_FLAGS);
-
- elem->skb = NULL;
- elem->ht_desc = tx_desc;
- elem->hw_desc = txp_desc;
-
- if (i == tx_ring->count - 1) {
- elem->next = tx_ring->start;
- tx_desc->next_offset = base;
- } else {
- elem->next = elem + 1;
- tx_desc->next_offset =
- base + (i + 1) * sizeof(*tx_desc);
- }
- }
-
- tx_ring->to_use = tx_ring->to_clean = tx_ring->start;
-
- return 0;
-}
-
-/*
- * Allocate RX ring elements and chain them together.
- * One-to-one association of adapter descriptors with ring elements.
- */
-static int c2_rx_ring_alloc(struct c2_ring *rx_ring, void *vaddr,
- dma_addr_t base, void __iomem * mmio_rxp_ring)
-{
- struct c2_rx_desc *rx_desc;
- struct c2_rxp_desc __iomem *rxp_desc;
- struct c2_element *elem;
- int i;
-
- rx_ring->start = kmalloc(sizeof(*elem) * rx_ring->count, GFP_KERNEL);
- if (!rx_ring->start)
- return -ENOMEM;
-
- elem = rx_ring->start;
- rx_desc = vaddr;
- rxp_desc = mmio_rxp_ring;
- for (i = 0; i < rx_ring->count; i++, elem++, rx_desc++, rxp_desc++) {
- rx_desc->len = 0;
- rx_desc->status = 0;
-
- /* Set RXP_HRXD_UNINIT */
- __raw_writew((__force u16) cpu_to_be16(RXP_HRXD_OK),
- (void __iomem *) rxp_desc + C2_RXP_STATUS);
- __raw_writew(0, (void __iomem *) rxp_desc + C2_RXP_COUNT);
- __raw_writew(0, (void __iomem *) rxp_desc + C2_RXP_LEN);
- __raw_writeq((__force u64) cpu_to_be64(0x99aabbccddeeffULL),
- (void __iomem *) rxp_desc + C2_RXP_ADDR);
- __raw_writew((__force u16) cpu_to_be16(RXP_HRXD_UNINIT),
- (void __iomem *) rxp_desc + C2_RXP_FLAGS);
-
- elem->skb = NULL;
- elem->ht_desc = rx_desc;
- elem->hw_desc = rxp_desc;
-
- if (i == rx_ring->count - 1) {
- elem->next = rx_ring->start;
- rx_desc->next_offset = base;
- } else {
- elem->next = elem + 1;
- rx_desc->next_offset =
- base + (i + 1) * sizeof(*rx_desc);
- }
- }
-
- rx_ring->to_use = rx_ring->to_clean = rx_ring->start;
-
- return 0;
-}
-
-/* Setup buffer for receiving */
-static inline int c2_rx_alloc(struct c2_port *c2_port, struct c2_element *elem)
-{
- struct c2_dev *c2dev = c2_port->c2dev;
- struct c2_rx_desc *rx_desc = elem->ht_desc;
- struct sk_buff *skb;
- dma_addr_t mapaddr;
- u32 maplen;
- struct c2_rxp_hdr *rxp_hdr;
-
- skb = dev_alloc_skb(c2_port->rx_buf_size);
- if (unlikely(!skb)) {
- pr_debug("%s: out of memory for receive\n",
- c2_port->netdev->name);
- return -ENOMEM;
- }
-
- /* Zero out the rxp hdr in the sk_buff */
- memset(skb->data, 0, sizeof(*rxp_hdr));
-
- skb->dev = c2_port->netdev;
-
- maplen = c2_port->rx_buf_size;
- mapaddr =
- pci_map_single(c2dev->pcidev, skb->data, maplen,
- PCI_DMA_FROMDEVICE);
-
- /* Set the sk_buff RXP_header to RXP_HRXD_READY */
- rxp_hdr = (struct c2_rxp_hdr *) skb->data;
- rxp_hdr->flags = RXP_HRXD_READY;
-
- __raw_writew(0, elem->hw_desc + C2_RXP_STATUS);
- __raw_writew((__force u16) cpu_to_be16((u16) maplen - sizeof(*rxp_hdr)),
- elem->hw_desc + C2_RXP_LEN);
- __raw_writeq((__force u64) cpu_to_be64(mapaddr), elem->hw_desc + C2_RXP_ADDR);
- __raw_writew((__force u16) cpu_to_be16(RXP_HRXD_READY),
- elem->hw_desc + C2_RXP_FLAGS);
-
- elem->skb = skb;
- elem->mapaddr = mapaddr;
- elem->maplen = maplen;
- rx_desc->len = maplen;
-
- return 0;
-}
-
-/*
- * Allocate buffers for the Rx ring
- * For receive: rx_ring.to_clean is next received frame
- */
-static int c2_rx_fill(struct c2_port *c2_port)
-{
- struct c2_ring *rx_ring = &c2_port->rx_ring;
- struct c2_element *elem;
- int ret = 0;
-
- elem = rx_ring->start;
- do {
- if (c2_rx_alloc(c2_port, elem)) {
- ret = 1;
- break;
- }
- } while ((elem = elem->next) != rx_ring->start);
-
- rx_ring->to_clean = rx_ring->start;
- return ret;
-}
-
-/* Free all buffers in RX ring, assumes receiver stopped */
-static void c2_rx_clean(struct c2_port *c2_port)
-{
- struct c2_dev *c2dev = c2_port->c2dev;
- struct c2_ring *rx_ring = &c2_port->rx_ring;
- struct c2_element *elem;
- struct c2_rx_desc *rx_desc;
-
- elem = rx_ring->start;
- do {
- rx_desc = elem->ht_desc;
- rx_desc->len = 0;
-
- __raw_writew(0, elem->hw_desc + C2_RXP_STATUS);
- __raw_writew(0, elem->hw_desc + C2_RXP_COUNT);
- __raw_writew(0, elem->hw_desc + C2_RXP_LEN);
- __raw_writeq((__force u64) cpu_to_be64(0x99aabbccddeeffULL),
- elem->hw_desc + C2_RXP_ADDR);
- __raw_writew((__force u16) cpu_to_be16(RXP_HRXD_UNINIT),
- elem->hw_desc + C2_RXP_FLAGS);
-
- if (elem->skb) {
- pci_unmap_single(c2dev->pcidev, elem->mapaddr,
- elem->maplen, PCI_DMA_FROMDEVICE);
- dev_kfree_skb(elem->skb);
- elem->skb = NULL;
- }
- } while ((elem = elem->next) != rx_ring->start);
-}
-
-static inline int c2_tx_free(struct c2_dev *c2dev, struct c2_element *elem)
-{
- struct c2_tx_desc *tx_desc = elem->ht_desc;
-
- tx_desc->len = 0;
-
- pci_unmap_single(c2dev->pcidev, elem->mapaddr, elem->maplen,
- PCI_DMA_TODEVICE);
-
- if (elem->skb) {
- dev_kfree_skb_any(elem->skb);
- elem->skb = NULL;
- }
-
- return 0;
-}
-
-/* Free all buffers in TX ring, assumes transmitter stopped */
-static void c2_tx_clean(struct c2_port *c2_port)
-{
- struct c2_ring *tx_ring = &c2_port->tx_ring;
- struct c2_element *elem;
- struct c2_txp_desc txp_htxd;
- int retry;
- unsigned long flags;
-
- spin_lock_irqsave(&c2_port->tx_lock, flags);
-
- elem = tx_ring->start;
-
- do {
- retry = 0;
- do {
- txp_htxd.flags =
- readw(elem->hw_desc + C2_TXP_FLAGS);
-
- if (txp_htxd.flags == TXP_HTXD_READY) {
- retry = 1;
- __raw_writew(0,
- elem->hw_desc + C2_TXP_LEN);
- __raw_writeq(0,
- elem->hw_desc + C2_TXP_ADDR);
- __raw_writew((__force u16) cpu_to_be16(TXP_HTXD_DONE),
- elem->hw_desc + C2_TXP_FLAGS);
- c2_port->netdev->stats.tx_dropped++;
- break;
- } else {
- __raw_writew(0,
- elem->hw_desc + C2_TXP_LEN);
- __raw_writeq((__force u64) cpu_to_be64(0x1122334455667788ULL),
- elem->hw_desc + C2_TXP_ADDR);
- __raw_writew((__force u16) cpu_to_be16(TXP_HTXD_UNINIT),
- elem->hw_desc + C2_TXP_FLAGS);
- }
-
- c2_tx_free(c2_port->c2dev, elem);
-
- } while ((elem = elem->next) != tx_ring->start);
- } while (retry);
-
- c2_port->tx_avail = c2_port->tx_ring.count - 1;
- c2_port->c2dev->cur_tx = tx_ring->to_use - tx_ring->start;
-
- if (c2_port->tx_avail > MAX_SKB_FRAGS + 1)
- netif_wake_queue(c2_port->netdev);
-
- spin_unlock_irqrestore(&c2_port->tx_lock, flags);
-}
-
-/*
- * Process transmit descriptors marked 'DONE' by the firmware,
- * freeing up their unneeded sk_buffs.
- */
-static void c2_tx_interrupt(struct net_device *netdev)
-{
- struct c2_port *c2_port = netdev_priv(netdev);
- struct c2_dev *c2dev = c2_port->c2dev;
- struct c2_ring *tx_ring = &c2_port->tx_ring;
- struct c2_element *elem;
- struct c2_txp_desc txp_htxd;
-
- spin_lock(&c2_port->tx_lock);
-
- for (elem = tx_ring->to_clean; elem != tx_ring->to_use;
- elem = elem->next) {
- txp_htxd.flags =
- be16_to_cpu((__force __be16) readw(elem->hw_desc + C2_TXP_FLAGS));
-
- if (txp_htxd.flags != TXP_HTXD_DONE)
- break;
-
- if (netif_msg_tx_done(c2_port)) {
- /* PCI reads are expensive in fast path */
- txp_htxd.len =
- be16_to_cpu((__force __be16) readw(elem->hw_desc + C2_TXP_LEN));
- pr_debug("%s: tx done slot %3Zu status 0x%x len "
- "%5u bytes\n",
- netdev->name, elem - tx_ring->start,
- txp_htxd.flags, txp_htxd.len);
- }
-
- c2_tx_free(c2dev, elem);
- ++(c2_port->tx_avail);
- }
-
- tx_ring->to_clean = elem;
-
- if (netif_queue_stopped(netdev)
- && c2_port->tx_avail > MAX_SKB_FRAGS + 1)
- netif_wake_queue(netdev);
-
- spin_unlock(&c2_port->tx_lock);
-}
-
-static void c2_rx_error(struct c2_port *c2_port, struct c2_element *elem)
-{
- struct c2_rx_desc *rx_desc = elem->ht_desc;
- struct c2_rxp_hdr *rxp_hdr = (struct c2_rxp_hdr *) elem->skb->data;
-
- if (rxp_hdr->status != RXP_HRXD_OK ||
- rxp_hdr->len > (rx_desc->len - sizeof(*rxp_hdr))) {
- pr_debug("BAD RXP_HRXD\n");
- pr_debug(" rx_desc : %p\n", rx_desc);
- pr_debug(" index : %Zu\n",
- elem - c2_port->rx_ring.start);
- pr_debug(" len : %u\n", rx_desc->len);
- pr_debug(" rxp_hdr : %p [PA %p]\n", rxp_hdr,
- (void *) __pa((unsigned long) rxp_hdr));
- pr_debug(" flags : 0x%x\n", rxp_hdr->flags);
- pr_debug(" status: 0x%x\n", rxp_hdr->status);
- pr_debug(" len : %u\n", rxp_hdr->len);
- pr_debug(" rsvd : 0x%x\n", rxp_hdr->rsvd);
- }
-
- /* Setup the skb for reuse since we're dropping this pkt */
- elem->skb->data = elem->skb->head;
- skb_reset_tail_pointer(elem->skb);
-
- /* Zero out the rxp hdr in the sk_buff */
- memset(elem->skb->data, 0, sizeof(*rxp_hdr));
-
- /* Write the descriptor to the adapter's rx ring */
- __raw_writew(0, elem->hw_desc + C2_RXP_STATUS);
- __raw_writew(0, elem->hw_desc + C2_RXP_COUNT);
- __raw_writew((__force u16) cpu_to_be16((u16) elem->maplen - sizeof(*rxp_hdr)),
- elem->hw_desc + C2_RXP_LEN);
- __raw_writeq((__force u64) cpu_to_be64(elem->mapaddr),
- elem->hw_desc + C2_RXP_ADDR);
- __raw_writew((__force u16) cpu_to_be16(RXP_HRXD_READY),
- elem->hw_desc + C2_RXP_FLAGS);
-
- pr_debug("packet dropped\n");
- c2_port->netdev->stats.rx_dropped++;
-}
-
-static void c2_rx_interrupt(struct net_device *netdev)
-{
- struct c2_port *c2_port = netdev_priv(netdev);
- struct c2_dev *c2dev = c2_port->c2dev;
- struct c2_ring *rx_ring = &c2_port->rx_ring;
- struct c2_element *elem;
- struct c2_rx_desc *rx_desc;
- struct c2_rxp_hdr *rxp_hdr;
- struct sk_buff *skb;
- dma_addr_t mapaddr;
- u32 maplen, buflen;
- unsigned long flags;
-
- spin_lock_irqsave(&c2dev->lock, flags);
-
- /* Begin where we left off */
- rx_ring->to_clean = rx_ring->start + c2dev->cur_rx;
-
- for (elem = rx_ring->to_clean; elem->next != rx_ring->to_clean;
- elem = elem->next) {
- rx_desc = elem->ht_desc;
- mapaddr = elem->mapaddr;
- maplen = elem->maplen;
- skb = elem->skb;
- rxp_hdr = (struct c2_rxp_hdr *) skb->data;
-
- if (rxp_hdr->flags != RXP_HRXD_DONE)
- break;
- buflen = rxp_hdr->len;
-
- /* Sanity check the RXP header */
- if (rxp_hdr->status != RXP_HRXD_OK ||
- buflen > (rx_desc->len - sizeof(*rxp_hdr))) {
- c2_rx_error(c2_port, elem);
- continue;
- }
-
- /*
- * Allocate and map a new skb for replenishing the host
- * RX desc
- */
- if (c2_rx_alloc(c2_port, elem)) {
- c2_rx_error(c2_port, elem);
- continue;
- }
-
- /* Unmap the old skb */
- pci_unmap_single(c2dev->pcidev, mapaddr, maplen,
- PCI_DMA_FROMDEVICE);
-
- prefetch(skb->data);
-
- /*
- * Skip past the leading 8 bytes comprising of the
- * "struct c2_rxp_hdr", prepended by the adapter
- * to the usual Ethernet header ("struct ethhdr"),
- * to the start of the raw Ethernet packet.
- *
- * Fix up the various fields in the sk_buff before
- * passing it up to netif_rx(). The transfer size
- * (in bytes) specified by the adapter len field of
- * the "struct rxp_hdr_t" does NOT include the
- * "sizeof(struct c2_rxp_hdr)".
- */
- skb->data += sizeof(*rxp_hdr);
- skb_set_tail_pointer(skb, buflen);
- skb->len = buflen;
- skb->protocol = eth_type_trans(skb, netdev);
-
- netif_rx(skb);
-
- netdev->stats.rx_packets++;
- netdev->stats.rx_bytes += buflen;
- }
-
- /* Save where we left off */
- rx_ring->to_clean = elem;
- c2dev->cur_rx = elem - rx_ring->start;
- C2_SET_CUR_RX(c2dev, c2dev->cur_rx);
-
- spin_unlock_irqrestore(&c2dev->lock, flags);
-}
-
-/*
- * Handle netisr0 TX & RX interrupts.
- */
-static irqreturn_t c2_interrupt(int irq, void *dev_id)
-{
- unsigned int netisr0, dmaisr;
- int handled = 0;
- struct c2_dev *c2dev = (struct c2_dev *) dev_id;
-
- /* Process CCILNET interrupts */
- netisr0 = readl(c2dev->regs + C2_NISR0);
- if (netisr0) {
-
- /*
- * There is an issue with the firmware that always
- * provides the status of RX for both TX & RX
- * interrupts. So process both queues here.
- */
- c2_rx_interrupt(c2dev->netdev);
- c2_tx_interrupt(c2dev->netdev);
-
- /* Clear the interrupt */
- writel(netisr0, c2dev->regs + C2_NISR0);
- handled++;
- }
-
- /* Process RNIC interrupts */
- dmaisr = readl(c2dev->regs + C2_DISR);
- if (dmaisr) {
- writel(dmaisr, c2dev->regs + C2_DISR);
- c2_rnic_interrupt(c2dev);
- handled++;
- }
-
- if (handled) {
- return IRQ_HANDLED;
- } else {
- return IRQ_NONE;
- }
-}
-
-static int c2_up(struct net_device *netdev)
-{
- struct c2_port *c2_port = netdev_priv(netdev);
- struct c2_dev *c2dev = c2_port->c2dev;
- struct c2_element *elem;
- struct c2_rxp_hdr *rxp_hdr;
- struct in_device *in_dev;
- size_t rx_size, tx_size;
- int ret, i;
- unsigned int netimr0;
-
- if (netif_msg_ifup(c2_port))
- pr_debug("%s: enabling interface\n", netdev->name);
-
- /* Set the Rx buffer size based on MTU */
- c2_set_rxbufsize(c2_port);
-
- /* Allocate DMA'able memory for Tx/Rx host descriptor rings */
- rx_size = c2_port->rx_ring.count * sizeof(struct c2_rx_desc);
- tx_size = c2_port->tx_ring.count * sizeof(struct c2_tx_desc);
-
- c2_port->mem_size = tx_size + rx_size;
- c2_port->mem = pci_zalloc_consistent(c2dev->pcidev, c2_port->mem_size,
- &c2_port->dma);
- if (c2_port->mem == NULL) {
- pr_debug("Unable to allocate memory for "
- "host descriptor rings\n");
- return -ENOMEM;
- }
-
- /* Create the Rx host descriptor ring */
- if ((ret =
- c2_rx_ring_alloc(&c2_port->rx_ring, c2_port->mem, c2_port->dma,
- c2dev->mmio_rxp_ring))) {
- pr_debug("Unable to create RX ring\n");
- goto bail0;
- }
-
- /* Allocate Rx buffers for the host descriptor ring */
- if (c2_rx_fill(c2_port)) {
- pr_debug("Unable to fill RX ring\n");
- goto bail1;
- }
-
- /* Create the Tx host descriptor ring */
- if ((ret = c2_tx_ring_alloc(&c2_port->tx_ring, c2_port->mem + rx_size,
- c2_port->dma + rx_size,
- c2dev->mmio_txp_ring))) {
- pr_debug("Unable to create TX ring\n");
- goto bail1;
- }
-
- /* Set the TX pointer to where we left off */
- c2_port->tx_avail = c2_port->tx_ring.count - 1;
- c2_port->tx_ring.to_use = c2_port->tx_ring.to_clean =
- c2_port->tx_ring.start + c2dev->cur_tx;
-
- /* missing: Initialize MAC */
-
- BUG_ON(c2_port->tx_ring.to_use != c2_port->tx_ring.to_clean);
-
- /* Reset the adapter, ensures the driver is in sync with the RXP */
- c2_reset(c2_port);
-
- /* Reset the READY bit in the sk_buff RXP headers & adapter HRXDQ */
- for (i = 0, elem = c2_port->rx_ring.start; i < c2_port->rx_ring.count;
- i++, elem++) {
- rxp_hdr = (struct c2_rxp_hdr *) elem->skb->data;
- rxp_hdr->flags = 0;
- __raw_writew((__force u16) cpu_to_be16(RXP_HRXD_READY),
- elem->hw_desc + C2_RXP_FLAGS);
- }
-
- /* Enable network packets */
- netif_start_queue(netdev);
-
- /* Enable IRQ */
- writel(0, c2dev->regs + C2_IDIS);
- netimr0 = readl(c2dev->regs + C2_NIMR0);
- netimr0 &= ~(C2_PCI_HTX_INT | C2_PCI_HRX_INT);
- writel(netimr0, c2dev->regs + C2_NIMR0);
-
- /* Tell the stack to ignore arp requests for ipaddrs bound to
- * other interfaces. This is needed to prevent the host stack
- * from responding to arp requests to the ipaddr bound on the
- * rdma interface.
- */
- in_dev = in_dev_get(netdev);
- IN_DEV_CONF_SET(in_dev, ARP_IGNORE, 1);
- in_dev_put(in_dev);
-
- return 0;
-
- bail1:
- c2_rx_clean(c2_port);
- kfree(c2_port->rx_ring.start);
-
- bail0:
- pci_free_consistent(c2dev->pcidev, c2_port->mem_size, c2_port->mem,
- c2_port->dma);
-
- return ret;
-}
-
-static int c2_down(struct net_device *netdev)
-{
- struct c2_port *c2_port = netdev_priv(netdev);
- struct c2_dev *c2dev = c2_port->c2dev;
-
- if (netif_msg_ifdown(c2_port))
- pr_debug("%s: disabling interface\n",
- netdev->name);
-
- /* Wait for all the queued packets to get sent */
- c2_tx_interrupt(netdev);
-
- /* Disable network packets */
- netif_stop_queue(netdev);
-
- /* Disable IRQs by clearing the interrupt mask */
- writel(1, c2dev->regs + C2_IDIS);
- writel(0, c2dev->regs + C2_NIMR0);
-
- /* missing: Stop transmitter */
-
- /* missing: Stop receiver */
-
- /* Reset the adapter, ensures the driver is in sync with the RXP */
- c2_reset(c2_port);
-
- /* missing: Turn off LEDs here */
-
- /* Free all buffers in the host descriptor rings */
- c2_tx_clean(c2_port);
- c2_rx_clean(c2_port);
-
- /* Free the host descriptor rings */
- kfree(c2_port->rx_ring.start);
- kfree(c2_port->tx_ring.start);
- pci_free_consistent(c2dev->pcidev, c2_port->mem_size, c2_port->mem,
- c2_port->dma);
-
- return 0;
-}
-
-static void c2_reset(struct c2_port *c2_port)
-{
- struct c2_dev *c2dev = c2_port->c2dev;
- unsigned int cur_rx = c2dev->cur_rx;
-
- /* Tell the hardware to quiesce */
- C2_SET_CUR_RX(c2dev, cur_rx | C2_PCI_HRX_QUI);
-
- /*
- * The hardware will reset the C2_PCI_HRX_QUI bit once
- * the RXP is quiesced. Wait 2 seconds for this.
- */
- ssleep(2);
-
- cur_rx = C2_GET_CUR_RX(c2dev);
-
- if (cur_rx & C2_PCI_HRX_QUI)
- pr_debug("c2_reset: failed to quiesce the hardware!\n");
-
- cur_rx &= ~C2_PCI_HRX_QUI;
-
- c2dev->cur_rx = cur_rx;
-
- pr_debug("Current RX: %u\n", c2dev->cur_rx);
-}
-
-static int c2_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
-{
- struct c2_port *c2_port = netdev_priv(netdev);
- struct c2_dev *c2dev = c2_port->c2dev;
- struct c2_ring *tx_ring = &c2_port->tx_ring;
- struct c2_element *elem;
- dma_addr_t mapaddr;
- u32 maplen;
- unsigned long flags;
- unsigned int i;
-
- spin_lock_irqsave(&c2_port->tx_lock, flags);
-
- if (unlikely(c2_port->tx_avail < (skb_shinfo(skb)->nr_frags + 1))) {
- netif_stop_queue(netdev);
- spin_unlock_irqrestore(&c2_port->tx_lock, flags);
-
- pr_debug("%s: Tx ring full when queue awake!\n",
- netdev->name);
- return NETDEV_TX_BUSY;
- }
-
- maplen = skb_headlen(skb);
- mapaddr =
- pci_map_single(c2dev->pcidev, skb->data, maplen, PCI_DMA_TODEVICE);
-
- elem = tx_ring->to_use;
- elem->skb = skb;
- elem->mapaddr = mapaddr;
- elem->maplen = maplen;
-
- /* Tell HW to xmit */
- __raw_writeq((__force u64) cpu_to_be64(mapaddr),
- elem->hw_desc + C2_TXP_ADDR);
- __raw_writew((__force u16) cpu_to_be16(maplen),
- elem->hw_desc + C2_TXP_LEN);
- __raw_writew((__force u16) cpu_to_be16(TXP_HTXD_READY),
- elem->hw_desc + C2_TXP_FLAGS);
-
- netdev->stats.tx_packets++;
- netdev->stats.tx_bytes += maplen;
-
- /* Loop thru additional data fragments and queue them */
- if (skb_shinfo(skb)->nr_frags) {
- for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
- const skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
- maplen = skb_frag_size(frag);
- mapaddr = skb_frag_dma_map(&c2dev->pcidev->dev, frag,
- 0, maplen, DMA_TO_DEVICE);
- elem = elem->next;
- elem->skb = NULL;
- elem->mapaddr = mapaddr;
- elem->maplen = maplen;
-
- /* Tell HW to xmit */
- __raw_writeq((__force u64) cpu_to_be64(mapaddr),
- elem->hw_desc + C2_TXP_ADDR);
- __raw_writew((__force u16) cpu_to_be16(maplen),
- elem->hw_desc + C2_TXP_LEN);
- __raw_writew((__force u16) cpu_to_be16(TXP_HTXD_READY),
- elem->hw_desc + C2_TXP_FLAGS);
-
- netdev->stats.tx_packets++;
- netdev->stats.tx_bytes += maplen;
- }
- }
-
- tx_ring->to_use = elem->next;
- c2_port->tx_avail -= (skb_shinfo(skb)->nr_frags + 1);
-
- if (c2_port->tx_avail <= MAX_SKB_FRAGS + 1) {
- netif_stop_queue(netdev);
- if (netif_msg_tx_queued(c2_port))
- pr_debug("%s: transmit queue full\n",
- netdev->name);
- }
-
- spin_unlock_irqrestore(&c2_port->tx_lock, flags);
-
- netdev->trans_start = jiffies;
-
- return NETDEV_TX_OK;
-}
-
-static void c2_tx_timeout(struct net_device *netdev)
-{
- struct c2_port *c2_port = netdev_priv(netdev);
-
- if (netif_msg_timer(c2_port))
- pr_debug("%s: tx timeout\n", netdev->name);
-
- c2_tx_clean(c2_port);
-}
-
-static int c2_change_mtu(struct net_device *netdev, int new_mtu)
-{
- int ret = 0;
-
- if (new_mtu < ETH_ZLEN || new_mtu > ETH_JUMBO_MTU)
- return -EINVAL;
-
- netdev->mtu = new_mtu;
-
- if (netif_running(netdev)) {
- c2_down(netdev);
-
- c2_up(netdev);
- }
-
- return ret;
-}
-
-static const struct net_device_ops c2_netdev = {
- .ndo_open = c2_up,
- .ndo_stop = c2_down,
- .ndo_start_xmit = c2_xmit_frame,
- .ndo_tx_timeout = c2_tx_timeout,
- .ndo_change_mtu = c2_change_mtu,
- .ndo_set_mac_address = eth_mac_addr,
- .ndo_validate_addr = eth_validate_addr,
-};
-
-/* Initialize network device */
-static struct net_device *c2_devinit(struct c2_dev *c2dev,
- void __iomem * mmio_addr)
-{
- struct c2_port *c2_port = NULL;
- struct net_device *netdev = alloc_etherdev(sizeof(*c2_port));
-
- if (!netdev) {
- pr_debug("c2_port etherdev alloc failed");
- return NULL;
- }
-
- SET_NETDEV_DEV(netdev, &c2dev->pcidev->dev);
-
- netdev->netdev_ops = &c2_netdev;
- netdev->watchdog_timeo = C2_TX_TIMEOUT;
- netdev->irq = c2dev->pcidev->irq;
-
- c2_port = netdev_priv(netdev);
- c2_port->netdev = netdev;
- c2_port->c2dev = c2dev;
- c2_port->msg_enable = netif_msg_init(debug, default_msg);
- c2_port->tx_ring.count = C2_NUM_TX_DESC;
- c2_port->rx_ring.count = C2_NUM_RX_DESC;
-
- spin_lock_init(&c2_port->tx_lock);
-
- /* Copy our 48-bit ethernet hardware address */
- memcpy_fromio(netdev->dev_addr, mmio_addr + C2_REGS_ENADDR, 6);
-
- /* Validate the MAC address */
- if (!is_valid_ether_addr(netdev->dev_addr)) {
- pr_debug("Invalid MAC Address\n");
- c2_print_macaddr(netdev);
- free_netdev(netdev);
- return NULL;
- }
-
- c2dev->netdev = netdev;
-
- return netdev;
-}
-
-static int c2_probe(struct pci_dev *pcidev, const struct pci_device_id *ent)
-{
- int ret = 0, i;
- unsigned long reg0_start, reg0_flags, reg0_len;
- unsigned long reg2_start, reg2_flags, reg2_len;
- unsigned long reg4_start, reg4_flags, reg4_len;
- unsigned kva_map_size;
- struct net_device *netdev = NULL;
- struct c2_dev *c2dev = NULL;
- void __iomem *mmio_regs = NULL;
-
- printk(KERN_INFO PFX "AMSO1100 Gigabit Ethernet driver v%s loaded\n",
- DRV_VERSION);
-
- /* Enable PCI device */
- ret = pci_enable_device(pcidev);
- if (ret) {
- printk(KERN_ERR PFX "%s: Unable to enable PCI device\n",
- pci_name(pcidev));
- goto bail0;
- }
-
- reg0_start = pci_resource_start(pcidev, BAR_0);
- reg0_len = pci_resource_len(pcidev, BAR_0);
- reg0_flags = pci_resource_flags(pcidev, BAR_0);
-
- reg2_start = pci_resource_start(pcidev, BAR_2);
- reg2_len = pci_resource_len(pcidev, BAR_2);
- reg2_flags = pci_resource_flags(pcidev, BAR_2);
-
- reg4_start = pci_resource_start(pcidev, BAR_4);
- reg4_len = pci_resource_len(pcidev, BAR_4);
- reg4_flags = pci_resource_flags(pcidev, BAR_4);
-
- pr_debug("BAR0 size = 0x%lX bytes\n", reg0_len);
- pr_debug("BAR2 size = 0x%lX bytes\n", reg2_len);
- pr_debug("BAR4 size = 0x%lX bytes\n", reg4_len);
-
- /* Make sure PCI base addr are MMIO */
- if (!(reg0_flags & IORESOURCE_MEM) ||
- !(reg2_flags & IORESOURCE_MEM) || !(reg4_flags & IORESOURCE_MEM)) {
- printk(KERN_ERR PFX "PCI regions not an MMIO resource\n");
- ret = -ENODEV;
- goto bail1;
- }
-
- /* Check for weird/broken PCI region reporting */
- if ((reg0_len < C2_REG0_SIZE) ||
- (reg2_len < C2_REG2_SIZE) || (reg4_len < C2_REG4_SIZE)) {
- printk(KERN_ERR PFX "Invalid PCI region sizes\n");
- ret = -ENODEV;
- goto bail1;
- }
-
- /* Reserve PCI I/O and memory resources */
- ret = pci_request_regions(pcidev, DRV_NAME);
- if (ret) {
- printk(KERN_ERR PFX "%s: Unable to request regions\n",
- pci_name(pcidev));
- goto bail1;
- }
-
- if ((sizeof(dma_addr_t) > 4)) {
- ret = pci_set_dma_mask(pcidev, DMA_BIT_MASK(64));
- if (ret < 0) {
- printk(KERN_ERR PFX "64b DMA configuration failed\n");
- goto bail2;
- }
- } else {
- ret = pci_set_dma_mask(pcidev, DMA_BIT_MASK(32));
- if (ret < 0) {
- printk(KERN_ERR PFX "32b DMA configuration failed\n");
- goto bail2;
- }
- }
-
- /* Enables bus-mastering on the device */
- pci_set_master(pcidev);
-
- /* Remap the adapter PCI registers in BAR4 */
- mmio_regs = ioremap_nocache(reg4_start + C2_PCI_REGS_OFFSET,
- sizeof(struct c2_adapter_pci_regs));
- if (!mmio_regs) {
- printk(KERN_ERR PFX
- "Unable to remap adapter PCI registers in BAR4\n");
- ret = -EIO;
- goto bail2;
- }
-
- /* Validate PCI regs magic */
- for (i = 0; i < sizeof(c2_magic); i++) {
- if (c2_magic[i] != readb(mmio_regs + C2_REGS_MAGIC + i)) {
- printk(KERN_ERR PFX "Downlevel Firmware boot loader "
- "[%d/%Zd: got 0x%x, exp 0x%x]. Use the cc_flash "
- "utility to update your boot loader\n",
- i + 1, sizeof(c2_magic),
- readb(mmio_regs + C2_REGS_MAGIC + i),
- c2_magic[i]);
- printk(KERN_ERR PFX "Adapter not claimed\n");
- iounmap(mmio_regs);
- ret = -EIO;
- goto bail2;
- }
- }
-
- /* Validate the adapter version */
- if (be32_to_cpu((__force __be32) readl(mmio_regs + C2_REGS_VERS)) != C2_VERSION) {
- printk(KERN_ERR PFX "Version mismatch "
- "[fw=%u, c2=%u], Adapter not claimed\n",
- be32_to_cpu((__force __be32) readl(mmio_regs + C2_REGS_VERS)),
- C2_VERSION);
- ret = -EINVAL;
- iounmap(mmio_regs);
- goto bail2;
- }
-
- /* Validate the adapter IVN */
- if (be32_to_cpu((__force __be32) readl(mmio_regs + C2_REGS_IVN)) != C2_IVN) {
- printk(KERN_ERR PFX "Downlevel FIrmware level. You should be using "
- "the OpenIB device support kit. "
- "[fw=0x%x, c2=0x%x], Adapter not claimed\n",
- be32_to_cpu((__force __be32) readl(mmio_regs + C2_REGS_IVN)),
- C2_IVN);
- ret = -EINVAL;
- iounmap(mmio_regs);
- goto bail2;
- }
-
- /* Allocate hardware structure */
- c2dev = (struct c2_dev *) ib_alloc_device(sizeof(*c2dev));
- if (!c2dev) {
- printk(KERN_ERR PFX "%s: Unable to alloc hardware struct\n",
- pci_name(pcidev));
- ret = -ENOMEM;
- iounmap(mmio_regs);
- goto bail2;
- }
-
- memset(c2dev, 0, sizeof(*c2dev));
- spin_lock_init(&c2dev->lock);
- c2dev->pcidev = pcidev;
- c2dev->cur_tx = 0;
-
- /* Get the last RX index */
- c2dev->cur_rx =
- (be32_to_cpu((__force __be32) readl(mmio_regs + C2_REGS_HRX_CUR)) -
- 0xffffc000) / sizeof(struct c2_rxp_desc);
-
- /* Request an interrupt line for the driver */
- ret = request_irq(pcidev->irq, c2_interrupt, IRQF_SHARED, DRV_NAME, c2dev);
- if (ret) {
- printk(KERN_ERR PFX "%s: requested IRQ %u is busy\n",
- pci_name(pcidev), pcidev->irq);
- iounmap(mmio_regs);
- goto bail3;
- }
-
- /* Set driver specific data */
- pci_set_drvdata(pcidev, c2dev);
-
- /* Initialize network device */
- if ((netdev = c2_devinit(c2dev, mmio_regs)) == NULL) {
- ret = -ENOMEM;
- iounmap(mmio_regs);
- goto bail4;
- }
-
- /* Save off the actual size prior to unmapping mmio_regs */
- kva_map_size = be32_to_cpu((__force __be32) readl(mmio_regs + C2_REGS_PCI_WINSIZE));
-
- /* Unmap the adapter PCI registers in BAR4 */
- iounmap(mmio_regs);
-
- /* Register network device */
- ret = register_netdev(netdev);
- if (ret) {
- printk(KERN_ERR PFX "Unable to register netdev, ret = %d\n",
- ret);
- goto bail5;
- }
-
- /* Disable network packets */
- netif_stop_queue(netdev);
-
- /* Remap the adapter HRXDQ PA space to kernel VA space */
- c2dev->mmio_rxp_ring = ioremap_nocache(reg4_start + C2_RXP_HRXDQ_OFFSET,
- C2_RXP_HRXDQ_SIZE);
- if (!c2dev->mmio_rxp_ring) {
- printk(KERN_ERR PFX "Unable to remap MMIO HRXDQ region\n");
- ret = -EIO;
- goto bail6;
- }
-
- /* Remap the adapter HTXDQ PA space to kernel VA space */
- c2dev->mmio_txp_ring = ioremap_nocache(reg4_start + C2_TXP_HTXDQ_OFFSET,
- C2_TXP_HTXDQ_SIZE);
- if (!c2dev->mmio_txp_ring) {
- printk(KERN_ERR PFX "Unable to remap MMIO HTXDQ region\n");
- ret = -EIO;
- goto bail7;
- }
-
- /* Save off the current RX index in the last 4 bytes of the TXP Ring */
- C2_SET_CUR_RX(c2dev, c2dev->cur_rx);
-
- /* Remap the PCI registers in adapter BAR0 to kernel VA space */
- c2dev->regs = ioremap_nocache(reg0_start, reg0_len);
- if (!c2dev->regs) {
- printk(KERN_ERR PFX "Unable to remap BAR0\n");
- ret = -EIO;
- goto bail8;
- }
-
- /* Remap the PCI registers in adapter BAR4 to kernel VA space */
- c2dev->pa = reg4_start + C2_PCI_REGS_OFFSET;
- c2dev->kva = ioremap_nocache(reg4_start + C2_PCI_REGS_OFFSET,
- kva_map_size);
- if (!c2dev->kva) {
- printk(KERN_ERR PFX "Unable to remap BAR4\n");
- ret = -EIO;
- goto bail9;
- }
-
- /* Print out the MAC address */
- c2_print_macaddr(netdev);
-
- ret = c2_rnic_init(c2dev);
- if (ret) {
- printk(KERN_ERR PFX "c2_rnic_init failed: %d\n", ret);
- goto bail10;
- }
-
- ret = c2_register_device(c2dev);
- if (ret)
- goto bail10;
-
- return 0;
-
- bail10:
- iounmap(c2dev->kva);
-
- bail9:
- iounmap(c2dev->regs);
-
- bail8:
- iounmap(c2dev->mmio_txp_ring);
-
- bail7:
- iounmap(c2dev->mmio_rxp_ring);
-
- bail6:
- unregister_netdev(netdev);
-
- bail5:
- free_netdev(netdev);
-
- bail4:
- free_irq(pcidev->irq, c2dev);
-
- bail3:
- ib_dealloc_device(&c2dev->ibdev);
-
- bail2:
- pci_release_regions(pcidev);
-
- bail1:
- pci_disable_device(pcidev);
-
- bail0:
- return ret;
-}
-
-static void c2_remove(struct pci_dev *pcidev)
-{
- struct c2_dev *c2dev = pci_get_drvdata(pcidev);
- struct net_device *netdev = c2dev->netdev;
-
- /* Unregister with OpenIB */
- c2_unregister_device(c2dev);
-
- /* Clean up the RNIC resources */
- c2_rnic_term(c2dev);
-
- /* Remove network device from the kernel */
- unregister_netdev(netdev);
-
- /* Free network device */
- free_netdev(netdev);
-
- /* Free the interrupt line */
- free_irq(pcidev->irq, c2dev);
-
- /* missing: Turn LEDs off here */
-
- /* Unmap adapter PA space */
- iounmap(c2dev->kva);
- iounmap(c2dev->regs);
- iounmap(c2dev->mmio_txp_ring);
- iounmap(c2dev->mmio_rxp_ring);
-
- /* Free the hardware structure */
- ib_dealloc_device(&c2dev->ibdev);
-
- /* Release reserved PCI I/O and memory resources */
- pci_release_regions(pcidev);
-
- /* Disable PCI device */
- pci_disable_device(pcidev);
-
- /* Clear driver specific data */
- pci_set_drvdata(pcidev, NULL);
-}
-
-static struct pci_driver c2_pci_driver = {
- .name = DRV_NAME,
- .id_table = c2_pci_table,
- .probe = c2_probe,
- .remove = c2_remove,
-};
-
-module_pci_driver(c2_pci_driver);
Code Review / kvmfornfv.git / blobdiff