--- /dev/null
+/*
+* Copyright (C) 2012 Invensense, Inc.
+*
+* This software is licensed under the terms of the GNU General Public
+* License version 2, as published by the Free Software Foundation, and
+* may be copied, distributed, and modified under those terms.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*/
+#include <linux/i2c.h>
+#include <linux/kfifo.h>
+#include <linux/spinlock.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/kfifo_buf.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/platform_data/invensense_mpu6050.h>
+
+/**
+ * struct inv_mpu6050_reg_map - Notable registers.
+ * @sample_rate_div: Divider applied to gyro output rate.
+ * @lpf: Configures internal low pass filter.
+ * @user_ctrl: Enables/resets the FIFO.
+ * @fifo_en: Determines which data will appear in FIFO.
+ * @gyro_config: gyro config register.
+ * @accl_config: accel config register
+ * @fifo_count_h: Upper byte of FIFO count.
+ * @fifo_r_w: FIFO register.
+ * @raw_gyro: Address of first gyro register.
+ * @raw_accl: Address of first accel register.
+ * @temperature: temperature register
+ * @int_enable: Interrupt enable register.
+ * @pwr_mgmt_1: Controls chip's power state and clock source.
+ * @pwr_mgmt_2: Controls power state of individual sensors.
+ */
+struct inv_mpu6050_reg_map {
+ u8 sample_rate_div;
+ u8 lpf;
+ u8 user_ctrl;
+ u8 fifo_en;
+ u8 gyro_config;
+ u8 accl_config;
+ u8 fifo_count_h;
+ u8 fifo_r_w;
+ u8 raw_gyro;
+ u8 raw_accl;
+ u8 temperature;
+ u8 int_enable;
+ u8 pwr_mgmt_1;
+ u8 pwr_mgmt_2;
+ u8 int_pin_cfg;
+};
+
+/*device enum */
+enum inv_devices {
+ INV_MPU6050,
+ INV_MPU6500,
+ INV_NUM_PARTS
+};
+
+/**
+ * struct inv_mpu6050_chip_config - Cached chip configuration data.
+ * @fsr: Full scale range.
+ * @lpf: Digital low pass filter frequency.
+ * @accl_fs: accel full scale range.
+ * @enable: master enable state.
+ * @accl_fifo_enable: enable accel data output
+ * @gyro_fifo_enable: enable gyro data output
+ * @fifo_rate: FIFO update rate.
+ */
+struct inv_mpu6050_chip_config {
+ unsigned int fsr:2;
+ unsigned int lpf:3;
+ unsigned int accl_fs:2;
+ unsigned int enable:1;
+ unsigned int accl_fifo_enable:1;
+ unsigned int gyro_fifo_enable:1;
+ u16 fifo_rate;
+};
+
+/**
+ * struct inv_mpu6050_hw - Other important hardware information.
+ * @num_reg: Number of registers on device.
+ * @name: name of the chip.
+ * @reg: register map of the chip.
+ * @config: configuration of the chip.
+ */
+struct inv_mpu6050_hw {
+ u8 num_reg;
+ u8 *name;
+ const struct inv_mpu6050_reg_map *reg;
+ const struct inv_mpu6050_chip_config *config;
+};
+
+/*
+ * struct inv_mpu6050_state - Driver state variables.
+ * @TIMESTAMP_FIFO_SIZE: fifo size for timestamp.
+ * @trig: IIO trigger.
+ * @chip_config: Cached attribute information.
+ * @reg: Map of important registers.
+ * @hw: Other hardware-specific information.
+ * @chip_type: chip type.
+ * @time_stamp_lock: spin lock to time stamp.
+ * @client: i2c client handle.
+ * @plat_data: platform data.
+ * @timestamps: kfifo queue to store time stamp.
+ */
+struct inv_mpu6050_state {
+#define TIMESTAMP_FIFO_SIZE 16
+ struct iio_trigger *trig;
+ struct inv_mpu6050_chip_config chip_config;
+ const struct inv_mpu6050_reg_map *reg;
+ const struct inv_mpu6050_hw *hw;
+ enum inv_devices chip_type;
+ spinlock_t time_stamp_lock;
+ struct i2c_client *client;
+ struct i2c_adapter *mux_adapter;
+ struct i2c_client *mux_client;
+ unsigned int powerup_count;
+ struct inv_mpu6050_platform_data plat_data;
+ DECLARE_KFIFO(timestamps, long long, TIMESTAMP_FIFO_SIZE);
+};
+
+/*register and associated bit definition*/
+#define INV_MPU6050_REG_SAMPLE_RATE_DIV 0x19
+#define INV_MPU6050_REG_CONFIG 0x1A
+#define INV_MPU6050_REG_GYRO_CONFIG 0x1B
+#define INV_MPU6050_REG_ACCEL_CONFIG 0x1C
+
+#define INV_MPU6050_REG_FIFO_EN 0x23
+#define INV_MPU6050_BIT_ACCEL_OUT 0x08
+#define INV_MPU6050_BITS_GYRO_OUT 0x70
+
+#define INV_MPU6050_REG_INT_ENABLE 0x38
+#define INV_MPU6050_BIT_DATA_RDY_EN 0x01
+#define INV_MPU6050_BIT_DMP_INT_EN 0x02
+
+#define INV_MPU6050_REG_RAW_ACCEL 0x3B
+#define INV_MPU6050_REG_TEMPERATURE 0x41
+#define INV_MPU6050_REG_RAW_GYRO 0x43
+
+#define INV_MPU6050_REG_USER_CTRL 0x6A
+#define INV_MPU6050_BIT_FIFO_RST 0x04
+#define INV_MPU6050_BIT_DMP_RST 0x08
+#define INV_MPU6050_BIT_I2C_MST_EN 0x20
+#define INV_MPU6050_BIT_FIFO_EN 0x40
+#define INV_MPU6050_BIT_DMP_EN 0x80
+
+#define INV_MPU6050_REG_PWR_MGMT_1 0x6B
+#define INV_MPU6050_BIT_H_RESET 0x80
+#define INV_MPU6050_BIT_SLEEP 0x40
+#define INV_MPU6050_BIT_CLK_MASK 0x7
+
+#define INV_MPU6050_REG_PWR_MGMT_2 0x6C
+#define INV_MPU6050_BIT_PWR_ACCL_STBY 0x38
+#define INV_MPU6050_BIT_PWR_GYRO_STBY 0x07
+
+#define INV_MPU6050_REG_FIFO_COUNT_H 0x72
+#define INV_MPU6050_REG_FIFO_R_W 0x74
+
+#define INV_MPU6050_BYTES_PER_3AXIS_SENSOR 6
+#define INV_MPU6050_FIFO_COUNT_BYTE 2
+#define INV_MPU6050_FIFO_THRESHOLD 500
+#define INV_MPU6050_POWER_UP_TIME 100
+#define INV_MPU6050_TEMP_UP_TIME 100
+#define INV_MPU6050_SENSOR_UP_TIME 30
+#define INV_MPU6050_REG_UP_TIME 5
+
+#define INV_MPU6050_TEMP_OFFSET 12421
+#define INV_MPU6050_TEMP_SCALE 2941
+#define INV_MPU6050_MAX_GYRO_FS_PARAM 3
+#define INV_MPU6050_MAX_ACCL_FS_PARAM 3
+#define INV_MPU6050_THREE_AXIS 3
+#define INV_MPU6050_GYRO_CONFIG_FSR_SHIFT 3
+#define INV_MPU6050_ACCL_CONFIG_FSR_SHIFT 3
+
+/* 6 + 6 round up and plus 8 */
+#define INV_MPU6050_OUTPUT_DATA_SIZE 24
+
+#define INV_MPU6050_REG_INT_PIN_CFG 0x37
+#define INV_MPU6050_BIT_BYPASS_EN 0x2
+
+/* init parameters */
+#define INV_MPU6050_INIT_FIFO_RATE 50
+#define INV_MPU6050_TIME_STAMP_TOR 5
+#define INV_MPU6050_MAX_FIFO_RATE 1000
+#define INV_MPU6050_MIN_FIFO_RATE 4
+#define INV_MPU6050_ONE_K_HZ 1000
+
+/* scan element definition */
+enum inv_mpu6050_scan {
+ INV_MPU6050_SCAN_ACCL_X,
+ INV_MPU6050_SCAN_ACCL_Y,
+ INV_MPU6050_SCAN_ACCL_Z,
+ INV_MPU6050_SCAN_GYRO_X,
+ INV_MPU6050_SCAN_GYRO_Y,
+ INV_MPU6050_SCAN_GYRO_Z,
+ INV_MPU6050_SCAN_TIMESTAMP,
+};
+
+enum inv_mpu6050_filter_e {
+ INV_MPU6050_FILTER_256HZ_NOLPF2 = 0,
+ INV_MPU6050_FILTER_188HZ,
+ INV_MPU6050_FILTER_98HZ,
+ INV_MPU6050_FILTER_42HZ,
+ INV_MPU6050_FILTER_20HZ,
+ INV_MPU6050_FILTER_10HZ,
+ INV_MPU6050_FILTER_5HZ,
+ INV_MPU6050_FILTER_2100HZ_NOLPF,
+ NUM_MPU6050_FILTER
+};
+
+/* IIO attribute address */
+enum INV_MPU6050_IIO_ATTR_ADDR {
+ ATTR_GYRO_MATRIX,
+ ATTR_ACCL_MATRIX,
+};
+
+enum inv_mpu6050_accl_fs_e {
+ INV_MPU6050_FS_02G = 0,
+ INV_MPU6050_FS_04G,
+ INV_MPU6050_FS_08G,
+ INV_MPU6050_FS_16G,
+ NUM_ACCL_FSR
+};
+
+enum inv_mpu6050_fsr_e {
+ INV_MPU6050_FSR_250DPS = 0,
+ INV_MPU6050_FSR_500DPS,
+ INV_MPU6050_FSR_1000DPS,
+ INV_MPU6050_FSR_2000DPS,
+ NUM_MPU6050_FSR
+};
+
+enum inv_mpu6050_clock_sel_e {
+ INV_CLK_INTERNAL = 0,
+ INV_CLK_PLL,
+ NUM_CLK
+};
+
+irqreturn_t inv_mpu6050_irq_handler(int irq, void *p);
+irqreturn_t inv_mpu6050_read_fifo(int irq, void *p);
+int inv_mpu6050_probe_trigger(struct iio_dev *indio_dev);
+void inv_mpu6050_remove_trigger(struct inv_mpu6050_state *st);
+int inv_reset_fifo(struct iio_dev *indio_dev);
+int inv_mpu6050_switch_engine(struct inv_mpu6050_state *st, bool en, u32 mask);
+int inv_mpu6050_write_reg(struct inv_mpu6050_state *st, int reg, u8 val);
+int inv_mpu6050_set_power_itg(struct inv_mpu6050_state *st, bool power_on);
+int inv_mpu_acpi_create_mux_client(struct inv_mpu6050_state *st);
+void inv_mpu_acpi_delete_mux_client(struct inv_mpu6050_state *st);
Code Review / kvmfornfv.git / blobdiff