--- /dev/null
+/*
+ * HID Sensors Driver
+ * Copyright (c) 2012, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/slab.h>
+#include <linux/hid-sensor-hub.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+static struct {
+ u32 usage_id;
+ int unit; /* 0 for default others from HID sensor spec */
+ int scale_val0; /* scale, whole number */
+ int scale_val1; /* scale, fraction in micros */
+} unit_conversion[] = {
+ {HID_USAGE_SENSOR_ACCEL_3D, 0, 9, 806650},
+ {HID_USAGE_SENSOR_ACCEL_3D,
+ HID_USAGE_SENSOR_UNITS_METERS_PER_SEC_SQRD, 1, 0},
+ {HID_USAGE_SENSOR_ACCEL_3D,
+ HID_USAGE_SENSOR_UNITS_G, 9, 806650},
+
+ {HID_USAGE_SENSOR_GYRO_3D, 0, 0, 17453},
+ {HID_USAGE_SENSOR_GYRO_3D,
+ HID_USAGE_SENSOR_UNITS_RADIANS_PER_SECOND, 1, 0},
+ {HID_USAGE_SENSOR_GYRO_3D,
+ HID_USAGE_SENSOR_UNITS_DEGREES_PER_SECOND, 0, 17453},
+
+ {HID_USAGE_SENSOR_COMPASS_3D, 0, 0, 1000},
+ {HID_USAGE_SENSOR_COMPASS_3D, HID_USAGE_SENSOR_UNITS_GAUSS, 1, 0},
+
+ {HID_USAGE_SENSOR_INCLINOMETER_3D, 0, 0, 17453},
+ {HID_USAGE_SENSOR_INCLINOMETER_3D,
+ HID_USAGE_SENSOR_UNITS_DEGREES, 0, 17453},
+ {HID_USAGE_SENSOR_INCLINOMETER_3D,
+ HID_USAGE_SENSOR_UNITS_RADIANS, 1, 0},
+
+ {HID_USAGE_SENSOR_ALS, 0, 1, 0},
+ {HID_USAGE_SENSOR_ALS, HID_USAGE_SENSOR_UNITS_LUX, 1, 0},
+
+ {HID_USAGE_SENSOR_PRESSURE, 0, 100000, 0},
+ {HID_USAGE_SENSOR_PRESSURE, HID_USAGE_SENSOR_UNITS_PASCAL, 1, 0},
+};
+
+static int pow_10(unsigned power)
+{
+ int i;
+ int ret = 1;
+ for (i = 0; i < power; ++i)
+ ret = ret * 10;
+
+ return ret;
+}
+
+static void simple_div(int dividend, int divisor, int *whole,
+ int *micro_frac)
+{
+ int rem;
+ int exp = 0;
+
+ *micro_frac = 0;
+ if (divisor == 0) {
+ *whole = 0;
+ return;
+ }
+ *whole = dividend/divisor;
+ rem = dividend % divisor;
+ if (rem) {
+ while (rem <= divisor) {
+ rem *= 10;
+ exp++;
+ }
+ *micro_frac = (rem / divisor) * pow_10(6-exp);
+ }
+}
+
+static void split_micro_fraction(unsigned int no, int exp, int *val1, int *val2)
+{
+ *val1 = no/pow_10(exp);
+ *val2 = no%pow_10(exp) * pow_10(6-exp);
+}
+
+/*
+VTF format uses exponent and variable size format.
+For example if the size is 2 bytes
+0x0067 with VTF16E14 format -> +1.03
+To convert just change to 0x67 to decimal and use two decimal as E14 stands
+for 10^-2.
+Negative numbers are 2's complement
+*/
+static void convert_from_vtf_format(u32 value, int size, int exp,
+ int *val1, int *val2)
+{
+ int sign = 1;
+
+ if (value & BIT(size*8 - 1)) {
+ value = ((1LL << (size * 8)) - value);
+ sign = -1;
+ }
+ exp = hid_sensor_convert_exponent(exp);
+ if (exp >= 0) {
+ *val1 = sign * value * pow_10(exp);
+ *val2 = 0;
+ } else {
+ split_micro_fraction(value, -exp, val1, val2);
+ if (*val1)
+ *val1 = sign * (*val1);
+ else
+ *val2 = sign * (*val2);
+ }
+}
+
+static u32 convert_to_vtf_format(int size, int exp, int val1, int val2)
+{
+ u32 value;
+ int sign = 1;
+
+ if (val1 < 0 || val2 < 0)
+ sign = -1;
+ exp = hid_sensor_convert_exponent(exp);
+ if (exp < 0) {
+ value = abs(val1) * pow_10(-exp);
+ value += abs(val2) / pow_10(6+exp);
+ } else
+ value = abs(val1) / pow_10(exp);
+ if (sign < 0)
+ value = ((1LL << (size * 8)) - value);
+
+ return value;
+}
+
+s32 hid_sensor_read_poll_value(struct hid_sensor_common *st)
+{
+ s32 value = 0;
+ int ret;
+
+ ret = sensor_hub_get_feature(st->hsdev,
+ st->poll.report_id,
+ st->poll.index, sizeof(value), &value);
+
+ if (ret < 0 || value < 0) {
+ return -EINVAL;
+ } else {
+ if (st->poll.units == HID_USAGE_SENSOR_UNITS_SECOND)
+ value = value * 1000;
+ }
+
+ return value;
+}
+EXPORT_SYMBOL(hid_sensor_read_poll_value);
+
+int hid_sensor_read_samp_freq_value(struct hid_sensor_common *st,
+ int *val1, int *val2)
+{
+ s32 value;
+ int ret;
+
+ ret = sensor_hub_get_feature(st->hsdev,
+ st->poll.report_id,
+ st->poll.index, sizeof(value), &value);
+ if (ret < 0 || value < 0) {
+ *val1 = *val2 = 0;
+ return -EINVAL;
+ } else {
+ if (st->poll.units == HID_USAGE_SENSOR_UNITS_MILLISECOND)
+ simple_div(1000, value, val1, val2);
+ else if (st->poll.units == HID_USAGE_SENSOR_UNITS_SECOND)
+ simple_div(1, value, val1, val2);
+ else {
+ *val1 = *val2 = 0;
+ return -EINVAL;
+ }
+ }
+
+ return IIO_VAL_INT_PLUS_MICRO;
+}
+EXPORT_SYMBOL(hid_sensor_read_samp_freq_value);
+
+int hid_sensor_write_samp_freq_value(struct hid_sensor_common *st,
+ int val1, int val2)
+{
+ s32 value;
+ int ret;
+
+ if (val1 < 0 || val2 < 0)
+ ret = -EINVAL;
+
+ value = val1 * pow_10(6) + val2;
+ if (value) {
+ if (st->poll.units == HID_USAGE_SENSOR_UNITS_MILLISECOND)
+ value = pow_10(9)/value;
+ else if (st->poll.units == HID_USAGE_SENSOR_UNITS_SECOND)
+ value = pow_10(6)/value;
+ else
+ value = 0;
+ }
+ ret = sensor_hub_set_feature(st->hsdev, st->poll.report_id,
+ st->poll.index, sizeof(value), &value);
+ if (ret < 0 || value < 0)
+ ret = -EINVAL;
+
+ return ret;
+}
+EXPORT_SYMBOL(hid_sensor_write_samp_freq_value);
+
+int hid_sensor_read_raw_hyst_value(struct hid_sensor_common *st,
+ int *val1, int *val2)
+{
+ s32 value;
+ int ret;
+
+ ret = sensor_hub_get_feature(st->hsdev,
+ st->sensitivity.report_id,
+ st->sensitivity.index, sizeof(value),
+ &value);
+ if (ret < 0 || value < 0) {
+ *val1 = *val2 = 0;
+ return -EINVAL;
+ } else {
+ convert_from_vtf_format(value, st->sensitivity.size,
+ st->sensitivity.unit_expo,
+ val1, val2);
+ }
+
+ return IIO_VAL_INT_PLUS_MICRO;
+}
+EXPORT_SYMBOL(hid_sensor_read_raw_hyst_value);
+
+int hid_sensor_write_raw_hyst_value(struct hid_sensor_common *st,
+ int val1, int val2)
+{
+ s32 value;
+ int ret;
+
+ value = convert_to_vtf_format(st->sensitivity.size,
+ st->sensitivity.unit_expo,
+ val1, val2);
+ ret = sensor_hub_set_feature(st->hsdev, st->sensitivity.report_id,
+ st->sensitivity.index, sizeof(value),
+ &value);
+ if (ret < 0 || value < 0)
+ ret = -EINVAL;
+
+ return ret;
+}
+EXPORT_SYMBOL(hid_sensor_write_raw_hyst_value);
+
+/*
+ * This fuction applies the unit exponent to the scale.
+ * For example:
+ * 9.806650 ->exp:2-> val0[980]val1[665000]
+ * 9.000806 ->exp:2-> val0[900]val1[80600]
+ * 0.174535 ->exp:2-> val0[17]val1[453500]
+ * 1.001745 ->exp:0-> val0[1]val1[1745]
+ * 1.001745 ->exp:2-> val0[100]val1[174500]
+ * 1.001745 ->exp:4-> val0[10017]val1[450000]
+ * 9.806650 ->exp:-2-> val0[0]val1[98066]
+ */
+static void adjust_exponent_micro(int *val0, int *val1, int scale0,
+ int scale1, int exp)
+{
+ int i;
+ int x;
+ int res;
+ int rem;
+
+ if (exp > 0) {
+ *val0 = scale0 * pow_10(exp);
+ res = 0;
+ if (exp > 6) {
+ *val1 = 0;
+ return;
+ }
+ for (i = 0; i < exp; ++i) {
+ x = scale1 / pow_10(5 - i);
+ res += (pow_10(exp - 1 - i) * x);
+ scale1 = scale1 % pow_10(5 - i);
+ }
+ *val0 += res;
+ *val1 = scale1 * pow_10(exp);
+ } else if (exp < 0) {
+ exp = abs(exp);
+ if (exp > 6) {
+ *val0 = *val1 = 0;
+ return;
+ }
+ *val0 = scale0 / pow_10(exp);
+ rem = scale0 % pow_10(exp);
+ res = 0;
+ for (i = 0; i < (6 - exp); ++i) {
+ x = scale1 / pow_10(5 - i);
+ res += (pow_10(5 - exp - i) * x);
+ scale1 = scale1 % pow_10(5 - i);
+ }
+ *val1 = rem * pow_10(6 - exp) + res;
+ } else {
+ *val0 = scale0;
+ *val1 = scale1;
+ }
+}
+
+int hid_sensor_format_scale(u32 usage_id,
+ struct hid_sensor_hub_attribute_info *attr_info,
+ int *val0, int *val1)
+{
+ int i;
+ int exp;
+
+ *val0 = 1;
+ *val1 = 0;
+
+ for (i = 0; i < ARRAY_SIZE(unit_conversion); ++i) {
+ if (unit_conversion[i].usage_id == usage_id &&
+ unit_conversion[i].unit == attr_info->units) {
+ exp = hid_sensor_convert_exponent(
+ attr_info->unit_expo);
+ adjust_exponent_micro(val0, val1,
+ unit_conversion[i].scale_val0,
+ unit_conversion[i].scale_val1, exp);
+ break;
+ }
+ }
+
+ return IIO_VAL_INT_PLUS_MICRO;
+}
+EXPORT_SYMBOL(hid_sensor_format_scale);
+
+static
+int hid_sensor_get_reporting_interval(struct hid_sensor_hub_device *hsdev,
+ u32 usage_id,
+ struct hid_sensor_common *st)
+{
+ sensor_hub_input_get_attribute_info(hsdev,
+ HID_FEATURE_REPORT, usage_id,
+ HID_USAGE_SENSOR_PROP_REPORT_INTERVAL,
+ &st->poll);
+ /* Default unit of measure is milliseconds */
+ if (st->poll.units == 0)
+ st->poll.units = HID_USAGE_SENSOR_UNITS_MILLISECOND;
+ return 0;
+
+}
+
+int hid_sensor_parse_common_attributes(struct hid_sensor_hub_device *hsdev,
+ u32 usage_id,
+ struct hid_sensor_common *st)
+{
+
+
+ hid_sensor_get_reporting_interval(hsdev, usage_id, st);
+
+ sensor_hub_input_get_attribute_info(hsdev,
+ HID_FEATURE_REPORT, usage_id,
+ HID_USAGE_SENSOR_PROP_REPORT_STATE,
+ &st->report_state);
+
+ sensor_hub_input_get_attribute_info(hsdev,
+ HID_FEATURE_REPORT, usage_id,
+ HID_USAGE_SENSOR_PROY_POWER_STATE,
+ &st->power_state);
+
+ sensor_hub_input_get_attribute_info(hsdev,
+ HID_FEATURE_REPORT, usage_id,
+ HID_USAGE_SENSOR_PROP_SENSITIVITY_ABS,
+ &st->sensitivity);
+
+ hid_dbg(hsdev->hdev, "common attributes: %x:%x, %x:%x, %x:%x %x:%x\n",
+ st->poll.index, st->poll.report_id,
+ st->report_state.index, st->report_state.report_id,
+ st->power_state.index, st->power_state.report_id,
+ st->sensitivity.index, st->sensitivity.report_id);
+
+ return 0;
+}
+EXPORT_SYMBOL(hid_sensor_parse_common_attributes);
+
+MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@intel.com>");
+MODULE_DESCRIPTION("HID Sensor common attribute processing");
+MODULE_LICENSE("GPL");
Code Review / kvmfornfv.git / blobdiff