--- /dev/null
+/*
+ * STMicroelectronics accelerometers driver
+ *
+ * Copyright 2012-2013 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/mutex.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/buffer.h>
+
+#include <linux/iio/common/st_sensors.h>
+#include "st_accel.h"
+
+#define ST_ACCEL_NUMBER_DATA_CHANNELS 3
+
+/* DEFAULT VALUE FOR SENSORS */
+#define ST_ACCEL_DEFAULT_OUT_X_L_ADDR 0x28
+#define ST_ACCEL_DEFAULT_OUT_Y_L_ADDR 0x2a
+#define ST_ACCEL_DEFAULT_OUT_Z_L_ADDR 0x2c
+
+/* FULLSCALE */
+#define ST_ACCEL_FS_AVL_2G 2
+#define ST_ACCEL_FS_AVL_4G 4
+#define ST_ACCEL_FS_AVL_6G 6
+#define ST_ACCEL_FS_AVL_8G 8
+#define ST_ACCEL_FS_AVL_16G 16
+
+/* CUSTOM VALUES FOR SENSOR 1 */
+#define ST_ACCEL_1_WAI_EXP 0x33
+#define ST_ACCEL_1_ODR_ADDR 0x20
+#define ST_ACCEL_1_ODR_MASK 0xf0
+#define ST_ACCEL_1_ODR_AVL_1HZ_VAL 0x01
+#define ST_ACCEL_1_ODR_AVL_10HZ_VAL 0x02
+#define ST_ACCEL_1_ODR_AVL_25HZ_VAL 0x03
+#define ST_ACCEL_1_ODR_AVL_50HZ_VAL 0x04
+#define ST_ACCEL_1_ODR_AVL_100HZ_VAL 0x05
+#define ST_ACCEL_1_ODR_AVL_200HZ_VAL 0x06
+#define ST_ACCEL_1_ODR_AVL_400HZ_VAL 0x07
+#define ST_ACCEL_1_ODR_AVL_1600HZ_VAL 0x08
+#define ST_ACCEL_1_FS_ADDR 0x23
+#define ST_ACCEL_1_FS_MASK 0x30
+#define ST_ACCEL_1_FS_AVL_2_VAL 0x00
+#define ST_ACCEL_1_FS_AVL_4_VAL 0x01
+#define ST_ACCEL_1_FS_AVL_8_VAL 0x02
+#define ST_ACCEL_1_FS_AVL_16_VAL 0x03
+#define ST_ACCEL_1_FS_AVL_2_GAIN IIO_G_TO_M_S_2(1000)
+#define ST_ACCEL_1_FS_AVL_4_GAIN IIO_G_TO_M_S_2(2000)
+#define ST_ACCEL_1_FS_AVL_8_GAIN IIO_G_TO_M_S_2(4000)
+#define ST_ACCEL_1_FS_AVL_16_GAIN IIO_G_TO_M_S_2(12000)
+#define ST_ACCEL_1_BDU_ADDR 0x23
+#define ST_ACCEL_1_BDU_MASK 0x80
+#define ST_ACCEL_1_DRDY_IRQ_ADDR 0x22
+#define ST_ACCEL_1_DRDY_IRQ_INT1_MASK 0x10
+#define ST_ACCEL_1_DRDY_IRQ_INT2_MASK 0x08
+#define ST_ACCEL_1_MULTIREAD_BIT true
+
+/* CUSTOM VALUES FOR SENSOR 2 */
+#define ST_ACCEL_2_WAI_EXP 0x32
+#define ST_ACCEL_2_ODR_ADDR 0x20
+#define ST_ACCEL_2_ODR_MASK 0x18
+#define ST_ACCEL_2_ODR_AVL_50HZ_VAL 0x00
+#define ST_ACCEL_2_ODR_AVL_100HZ_VAL 0x01
+#define ST_ACCEL_2_ODR_AVL_400HZ_VAL 0x02
+#define ST_ACCEL_2_ODR_AVL_1000HZ_VAL 0x03
+#define ST_ACCEL_2_PW_ADDR 0x20
+#define ST_ACCEL_2_PW_MASK 0xe0
+#define ST_ACCEL_2_FS_ADDR 0x23
+#define ST_ACCEL_2_FS_MASK 0x30
+#define ST_ACCEL_2_FS_AVL_2_VAL 0X00
+#define ST_ACCEL_2_FS_AVL_4_VAL 0X01
+#define ST_ACCEL_2_FS_AVL_8_VAL 0x03
+#define ST_ACCEL_2_FS_AVL_2_GAIN IIO_G_TO_M_S_2(1000)
+#define ST_ACCEL_2_FS_AVL_4_GAIN IIO_G_TO_M_S_2(2000)
+#define ST_ACCEL_2_FS_AVL_8_GAIN IIO_G_TO_M_S_2(3900)
+#define ST_ACCEL_2_BDU_ADDR 0x23
+#define ST_ACCEL_2_BDU_MASK 0x80
+#define ST_ACCEL_2_DRDY_IRQ_ADDR 0x22
+#define ST_ACCEL_2_DRDY_IRQ_INT1_MASK 0x02
+#define ST_ACCEL_2_DRDY_IRQ_INT2_MASK 0x10
+#define ST_ACCEL_2_MULTIREAD_BIT true
+
+/* CUSTOM VALUES FOR SENSOR 3 */
+#define ST_ACCEL_3_WAI_EXP 0x40
+#define ST_ACCEL_3_ODR_ADDR 0x20
+#define ST_ACCEL_3_ODR_MASK 0xf0
+#define ST_ACCEL_3_ODR_AVL_3HZ_VAL 0x01
+#define ST_ACCEL_3_ODR_AVL_6HZ_VAL 0x02
+#define ST_ACCEL_3_ODR_AVL_12HZ_VAL 0x03
+#define ST_ACCEL_3_ODR_AVL_25HZ_VAL 0x04
+#define ST_ACCEL_3_ODR_AVL_50HZ_VAL 0x05
+#define ST_ACCEL_3_ODR_AVL_100HZ_VAL 0x06
+#define ST_ACCEL_3_ODR_AVL_200HZ_VAL 0x07
+#define ST_ACCEL_3_ODR_AVL_400HZ_VAL 0x08
+#define ST_ACCEL_3_ODR_AVL_800HZ_VAL 0x09
+#define ST_ACCEL_3_ODR_AVL_1600HZ_VAL 0x0a
+#define ST_ACCEL_3_FS_ADDR 0x24
+#define ST_ACCEL_3_FS_MASK 0x38
+#define ST_ACCEL_3_FS_AVL_2_VAL 0X00
+#define ST_ACCEL_3_FS_AVL_4_VAL 0X01
+#define ST_ACCEL_3_FS_AVL_6_VAL 0x02
+#define ST_ACCEL_3_FS_AVL_8_VAL 0x03
+#define ST_ACCEL_3_FS_AVL_16_VAL 0x04
+#define ST_ACCEL_3_FS_AVL_2_GAIN IIO_G_TO_M_S_2(61)
+#define ST_ACCEL_3_FS_AVL_4_GAIN IIO_G_TO_M_S_2(122)
+#define ST_ACCEL_3_FS_AVL_6_GAIN IIO_G_TO_M_S_2(183)
+#define ST_ACCEL_3_FS_AVL_8_GAIN IIO_G_TO_M_S_2(244)
+#define ST_ACCEL_3_FS_AVL_16_GAIN IIO_G_TO_M_S_2(732)
+#define ST_ACCEL_3_BDU_ADDR 0x20
+#define ST_ACCEL_3_BDU_MASK 0x08
+#define ST_ACCEL_3_DRDY_IRQ_ADDR 0x23
+#define ST_ACCEL_3_DRDY_IRQ_INT1_MASK 0x80
+#define ST_ACCEL_3_DRDY_IRQ_INT2_MASK 0x00
+#define ST_ACCEL_3_IG1_EN_ADDR 0x23
+#define ST_ACCEL_3_IG1_EN_MASK 0x08
+#define ST_ACCEL_3_MULTIREAD_BIT false
+
+/* CUSTOM VALUES FOR SENSOR 4 */
+#define ST_ACCEL_4_WAI_EXP 0x3a
+#define ST_ACCEL_4_ODR_ADDR 0x20
+#define ST_ACCEL_4_ODR_MASK 0x30 /* DF1 and DF0 */
+#define ST_ACCEL_4_ODR_AVL_40HZ_VAL 0x00
+#define ST_ACCEL_4_ODR_AVL_160HZ_VAL 0x01
+#define ST_ACCEL_4_ODR_AVL_640HZ_VAL 0x02
+#define ST_ACCEL_4_ODR_AVL_2560HZ_VAL 0x03
+#define ST_ACCEL_4_PW_ADDR 0x20
+#define ST_ACCEL_4_PW_MASK 0xc0
+#define ST_ACCEL_4_FS_ADDR 0x21
+#define ST_ACCEL_4_FS_MASK 0x80
+#define ST_ACCEL_4_FS_AVL_2_VAL 0X00
+#define ST_ACCEL_4_FS_AVL_6_VAL 0X01
+#define ST_ACCEL_4_FS_AVL_2_GAIN IIO_G_TO_M_S_2(1024)
+#define ST_ACCEL_4_FS_AVL_6_GAIN IIO_G_TO_M_S_2(340)
+#define ST_ACCEL_4_BDU_ADDR 0x21
+#define ST_ACCEL_4_BDU_MASK 0x40
+#define ST_ACCEL_4_DRDY_IRQ_ADDR 0x21
+#define ST_ACCEL_4_DRDY_IRQ_INT1_MASK 0x04
+#define ST_ACCEL_4_IG1_EN_ADDR 0x21
+#define ST_ACCEL_4_IG1_EN_MASK 0x08
+#define ST_ACCEL_4_MULTIREAD_BIT true
+
+static const struct iio_chan_spec st_accel_12bit_channels[] = {
+ ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
+ BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+ ST_SENSORS_SCAN_X, 1, IIO_MOD_X, 's', IIO_LE, 12, 16,
+ ST_ACCEL_DEFAULT_OUT_X_L_ADDR),
+ ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
+ BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+ ST_SENSORS_SCAN_Y, 1, IIO_MOD_Y, 's', IIO_LE, 12, 16,
+ ST_ACCEL_DEFAULT_OUT_Y_L_ADDR),
+ ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
+ BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+ ST_SENSORS_SCAN_Z, 1, IIO_MOD_Z, 's', IIO_LE, 12, 16,
+ ST_ACCEL_DEFAULT_OUT_Z_L_ADDR),
+ IIO_CHAN_SOFT_TIMESTAMP(3)
+};
+
+static const struct iio_chan_spec st_accel_16bit_channels[] = {
+ ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
+ BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+ ST_SENSORS_SCAN_X, 1, IIO_MOD_X, 's', IIO_LE, 16, 16,
+ ST_ACCEL_DEFAULT_OUT_X_L_ADDR),
+ ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
+ BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+ ST_SENSORS_SCAN_Y, 1, IIO_MOD_Y, 's', IIO_LE, 16, 16,
+ ST_ACCEL_DEFAULT_OUT_Y_L_ADDR),
+ ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
+ BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+ ST_SENSORS_SCAN_Z, 1, IIO_MOD_Z, 's', IIO_LE, 16, 16,
+ ST_ACCEL_DEFAULT_OUT_Z_L_ADDR),
+ IIO_CHAN_SOFT_TIMESTAMP(3)
+};
+
+static const struct st_sensor_settings st_accel_sensors_settings[] = {
+ {
+ .wai = ST_ACCEL_1_WAI_EXP,
+ .sensors_supported = {
+ [0] = LIS3DH_ACCEL_DEV_NAME,
+ [1] = LSM303DLHC_ACCEL_DEV_NAME,
+ [2] = LSM330D_ACCEL_DEV_NAME,
+ [3] = LSM330DL_ACCEL_DEV_NAME,
+ [4] = LSM330DLC_ACCEL_DEV_NAME,
+ },
+ .ch = (struct iio_chan_spec *)st_accel_12bit_channels,
+ .odr = {
+ .addr = ST_ACCEL_1_ODR_ADDR,
+ .mask = ST_ACCEL_1_ODR_MASK,
+ .odr_avl = {
+ { 1, ST_ACCEL_1_ODR_AVL_1HZ_VAL, },
+ { 10, ST_ACCEL_1_ODR_AVL_10HZ_VAL, },
+ { 25, ST_ACCEL_1_ODR_AVL_25HZ_VAL, },
+ { 50, ST_ACCEL_1_ODR_AVL_50HZ_VAL, },
+ { 100, ST_ACCEL_1_ODR_AVL_100HZ_VAL, },
+ { 200, ST_ACCEL_1_ODR_AVL_200HZ_VAL, },
+ { 400, ST_ACCEL_1_ODR_AVL_400HZ_VAL, },
+ { 1600, ST_ACCEL_1_ODR_AVL_1600HZ_VAL, },
+ },
+ },
+ .pw = {
+ .addr = ST_ACCEL_1_ODR_ADDR,
+ .mask = ST_ACCEL_1_ODR_MASK,
+ .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+ },
+ .enable_axis = {
+ .addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
+ .mask = ST_SENSORS_DEFAULT_AXIS_MASK,
+ },
+ .fs = {
+ .addr = ST_ACCEL_1_FS_ADDR,
+ .mask = ST_ACCEL_1_FS_MASK,
+ .fs_avl = {
+ [0] = {
+ .num = ST_ACCEL_FS_AVL_2G,
+ .value = ST_ACCEL_1_FS_AVL_2_VAL,
+ .gain = ST_ACCEL_1_FS_AVL_2_GAIN,
+ },
+ [1] = {
+ .num = ST_ACCEL_FS_AVL_4G,
+ .value = ST_ACCEL_1_FS_AVL_4_VAL,
+ .gain = ST_ACCEL_1_FS_AVL_4_GAIN,
+ },
+ [2] = {
+ .num = ST_ACCEL_FS_AVL_8G,
+ .value = ST_ACCEL_1_FS_AVL_8_VAL,
+ .gain = ST_ACCEL_1_FS_AVL_8_GAIN,
+ },
+ [3] = {
+ .num = ST_ACCEL_FS_AVL_16G,
+ .value = ST_ACCEL_1_FS_AVL_16_VAL,
+ .gain = ST_ACCEL_1_FS_AVL_16_GAIN,
+ },
+ },
+ },
+ .bdu = {
+ .addr = ST_ACCEL_1_BDU_ADDR,
+ .mask = ST_ACCEL_1_BDU_MASK,
+ },
+ .drdy_irq = {
+ .addr = ST_ACCEL_1_DRDY_IRQ_ADDR,
+ .mask_int1 = ST_ACCEL_1_DRDY_IRQ_INT1_MASK,
+ .mask_int2 = ST_ACCEL_1_DRDY_IRQ_INT2_MASK,
+ },
+ .multi_read_bit = ST_ACCEL_1_MULTIREAD_BIT,
+ .bootime = 2,
+ },
+ {
+ .wai = ST_ACCEL_2_WAI_EXP,
+ .sensors_supported = {
+ [0] = LIS331DLH_ACCEL_DEV_NAME,
+ [1] = LSM303DL_ACCEL_DEV_NAME,
+ [2] = LSM303DLH_ACCEL_DEV_NAME,
+ [3] = LSM303DLM_ACCEL_DEV_NAME,
+ },
+ .ch = (struct iio_chan_spec *)st_accel_12bit_channels,
+ .odr = {
+ .addr = ST_ACCEL_2_ODR_ADDR,
+ .mask = ST_ACCEL_2_ODR_MASK,
+ .odr_avl = {
+ { 50, ST_ACCEL_2_ODR_AVL_50HZ_VAL, },
+ { 100, ST_ACCEL_2_ODR_AVL_100HZ_VAL, },
+ { 400, ST_ACCEL_2_ODR_AVL_400HZ_VAL, },
+ { 1000, ST_ACCEL_2_ODR_AVL_1000HZ_VAL, },
+ },
+ },
+ .pw = {
+ .addr = ST_ACCEL_2_PW_ADDR,
+ .mask = ST_ACCEL_2_PW_MASK,
+ .value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
+ .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+ },
+ .enable_axis = {
+ .addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
+ .mask = ST_SENSORS_DEFAULT_AXIS_MASK,
+ },
+ .fs = {
+ .addr = ST_ACCEL_2_FS_ADDR,
+ .mask = ST_ACCEL_2_FS_MASK,
+ .fs_avl = {
+ [0] = {
+ .num = ST_ACCEL_FS_AVL_2G,
+ .value = ST_ACCEL_2_FS_AVL_2_VAL,
+ .gain = ST_ACCEL_2_FS_AVL_2_GAIN,
+ },
+ [1] = {
+ .num = ST_ACCEL_FS_AVL_4G,
+ .value = ST_ACCEL_2_FS_AVL_4_VAL,
+ .gain = ST_ACCEL_2_FS_AVL_4_GAIN,
+ },
+ [2] = {
+ .num = ST_ACCEL_FS_AVL_8G,
+ .value = ST_ACCEL_2_FS_AVL_8_VAL,
+ .gain = ST_ACCEL_2_FS_AVL_8_GAIN,
+ },
+ },
+ },
+ .bdu = {
+ .addr = ST_ACCEL_2_BDU_ADDR,
+ .mask = ST_ACCEL_2_BDU_MASK,
+ },
+ .drdy_irq = {
+ .addr = ST_ACCEL_2_DRDY_IRQ_ADDR,
+ .mask_int1 = ST_ACCEL_2_DRDY_IRQ_INT1_MASK,
+ .mask_int2 = ST_ACCEL_2_DRDY_IRQ_INT2_MASK,
+ },
+ .multi_read_bit = ST_ACCEL_2_MULTIREAD_BIT,
+ .bootime = 2,
+ },
+ {
+ .wai = ST_ACCEL_3_WAI_EXP,
+ .sensors_supported = {
+ [0] = LSM330_ACCEL_DEV_NAME,
+ },
+ .ch = (struct iio_chan_spec *)st_accel_16bit_channels,
+ .odr = {
+ .addr = ST_ACCEL_3_ODR_ADDR,
+ .mask = ST_ACCEL_3_ODR_MASK,
+ .odr_avl = {
+ { 3, ST_ACCEL_3_ODR_AVL_3HZ_VAL },
+ { 6, ST_ACCEL_3_ODR_AVL_6HZ_VAL, },
+ { 12, ST_ACCEL_3_ODR_AVL_12HZ_VAL, },
+ { 25, ST_ACCEL_3_ODR_AVL_25HZ_VAL, },
+ { 50, ST_ACCEL_3_ODR_AVL_50HZ_VAL, },
+ { 100, ST_ACCEL_3_ODR_AVL_100HZ_VAL, },
+ { 200, ST_ACCEL_3_ODR_AVL_200HZ_VAL, },
+ { 400, ST_ACCEL_3_ODR_AVL_400HZ_VAL, },
+ { 800, ST_ACCEL_3_ODR_AVL_800HZ_VAL, },
+ { 1600, ST_ACCEL_3_ODR_AVL_1600HZ_VAL, },
+ },
+ },
+ .pw = {
+ .addr = ST_ACCEL_3_ODR_ADDR,
+ .mask = ST_ACCEL_3_ODR_MASK,
+ .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+ },
+ .enable_axis = {
+ .addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
+ .mask = ST_SENSORS_DEFAULT_AXIS_MASK,
+ },
+ .fs = {
+ .addr = ST_ACCEL_3_FS_ADDR,
+ .mask = ST_ACCEL_3_FS_MASK,
+ .fs_avl = {
+ [0] = {
+ .num = ST_ACCEL_FS_AVL_2G,
+ .value = ST_ACCEL_3_FS_AVL_2_VAL,
+ .gain = ST_ACCEL_3_FS_AVL_2_GAIN,
+ },
+ [1] = {
+ .num = ST_ACCEL_FS_AVL_4G,
+ .value = ST_ACCEL_3_FS_AVL_4_VAL,
+ .gain = ST_ACCEL_3_FS_AVL_4_GAIN,
+ },
+ [2] = {
+ .num = ST_ACCEL_FS_AVL_6G,
+ .value = ST_ACCEL_3_FS_AVL_6_VAL,
+ .gain = ST_ACCEL_3_FS_AVL_6_GAIN,
+ },
+ [3] = {
+ .num = ST_ACCEL_FS_AVL_8G,
+ .value = ST_ACCEL_3_FS_AVL_8_VAL,
+ .gain = ST_ACCEL_3_FS_AVL_8_GAIN,
+ },
+ [4] = {
+ .num = ST_ACCEL_FS_AVL_16G,
+ .value = ST_ACCEL_3_FS_AVL_16_VAL,
+ .gain = ST_ACCEL_3_FS_AVL_16_GAIN,
+ },
+ },
+ },
+ .bdu = {
+ .addr = ST_ACCEL_3_BDU_ADDR,
+ .mask = ST_ACCEL_3_BDU_MASK,
+ },
+ .drdy_irq = {
+ .addr = ST_ACCEL_3_DRDY_IRQ_ADDR,
+ .mask_int1 = ST_ACCEL_3_DRDY_IRQ_INT1_MASK,
+ .mask_int2 = ST_ACCEL_3_DRDY_IRQ_INT2_MASK,
+ .ig1 = {
+ .en_addr = ST_ACCEL_3_IG1_EN_ADDR,
+ .en_mask = ST_ACCEL_3_IG1_EN_MASK,
+ },
+ },
+ .multi_read_bit = ST_ACCEL_3_MULTIREAD_BIT,
+ .bootime = 2,
+ },
+ {
+ .wai = ST_ACCEL_4_WAI_EXP,
+ .sensors_supported = {
+ [0] = LIS3LV02DL_ACCEL_DEV_NAME,
+ },
+ .ch = (struct iio_chan_spec *)st_accel_12bit_channels,
+ .odr = {
+ .addr = ST_ACCEL_4_ODR_ADDR,
+ .mask = ST_ACCEL_4_ODR_MASK,
+ .odr_avl = {
+ { 40, ST_ACCEL_4_ODR_AVL_40HZ_VAL },
+ { 160, ST_ACCEL_4_ODR_AVL_160HZ_VAL, },
+ { 640, ST_ACCEL_4_ODR_AVL_640HZ_VAL, },
+ { 2560, ST_ACCEL_4_ODR_AVL_2560HZ_VAL, },
+ },
+ },
+ .pw = {
+ .addr = ST_ACCEL_4_PW_ADDR,
+ .mask = ST_ACCEL_4_PW_MASK,
+ .value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
+ .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+ },
+ .enable_axis = {
+ .addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
+ .mask = ST_SENSORS_DEFAULT_AXIS_MASK,
+ },
+ .fs = {
+ .addr = ST_ACCEL_4_FS_ADDR,
+ .mask = ST_ACCEL_4_FS_MASK,
+ .fs_avl = {
+ [0] = {
+ .num = ST_ACCEL_FS_AVL_2G,
+ .value = ST_ACCEL_4_FS_AVL_2_VAL,
+ .gain = ST_ACCEL_4_FS_AVL_2_GAIN,
+ },
+ [1] = {
+ .num = ST_ACCEL_FS_AVL_6G,
+ .value = ST_ACCEL_4_FS_AVL_6_VAL,
+ .gain = ST_ACCEL_4_FS_AVL_6_GAIN,
+ },
+ },
+ },
+ .bdu = {
+ .addr = ST_ACCEL_4_BDU_ADDR,
+ .mask = ST_ACCEL_4_BDU_MASK,
+ },
+ .drdy_irq = {
+ .addr = ST_ACCEL_4_DRDY_IRQ_ADDR,
+ .mask_int1 = ST_ACCEL_4_DRDY_IRQ_INT1_MASK,
+ .ig1 = {
+ .en_addr = ST_ACCEL_4_IG1_EN_ADDR,
+ .en_mask = ST_ACCEL_4_IG1_EN_MASK,
+ },
+ },
+ .multi_read_bit = ST_ACCEL_4_MULTIREAD_BIT,
+ .bootime = 2, /* guess */
+ },
+};
+
+static int st_accel_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *ch, int *val,
+ int *val2, long mask)
+{
+ int err;
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ err = st_sensors_read_info_raw(indio_dev, ch, val);
+ if (err < 0)
+ goto read_error;
+
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_SCALE:
+ *val = 0;
+ *val2 = adata->current_fullscale->gain;
+ return IIO_VAL_INT_PLUS_MICRO;
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ *val = adata->odr;
+ return IIO_VAL_INT;
+ default:
+ return -EINVAL;
+ }
+
+read_error:
+ return err;
+}
+
+static int st_accel_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int val, int val2, long mask)
+{
+ int err;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_SCALE:
+ err = st_sensors_set_fullscale_by_gain(indio_dev, val2);
+ break;
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ if (val2)
+ return -EINVAL;
+ mutex_lock(&indio_dev->mlock);
+ err = st_sensors_set_odr(indio_dev, val);
+ mutex_unlock(&indio_dev->mlock);
+ return err;
+ default:
+ return -EINVAL;
+ }
+
+ return err;
+}
+
+static ST_SENSORS_DEV_ATTR_SAMP_FREQ_AVAIL();
+static ST_SENSORS_DEV_ATTR_SCALE_AVAIL(in_accel_scale_available);
+
+static struct attribute *st_accel_attributes[] = {
+ &iio_dev_attr_sampling_frequency_available.dev_attr.attr,
+ &iio_dev_attr_in_accel_scale_available.dev_attr.attr,
+ NULL,
+};
+
+static const struct attribute_group st_accel_attribute_group = {
+ .attrs = st_accel_attributes,
+};
+
+static const struct iio_info accel_info = {
+ .driver_module = THIS_MODULE,
+ .attrs = &st_accel_attribute_group,
+ .read_raw = &st_accel_read_raw,
+ .write_raw = &st_accel_write_raw,
+};
+
+#ifdef CONFIG_IIO_TRIGGER
+static const struct iio_trigger_ops st_accel_trigger_ops = {
+ .owner = THIS_MODULE,
+ .set_trigger_state = ST_ACCEL_TRIGGER_SET_STATE,
+};
+#define ST_ACCEL_TRIGGER_OPS (&st_accel_trigger_ops)
+#else
+#define ST_ACCEL_TRIGGER_OPS NULL
+#endif
+
+int st_accel_common_probe(struct iio_dev *indio_dev)
+{
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+ int irq = adata->get_irq_data_ready(indio_dev);
+ int err;
+
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->info = &accel_info;
+ mutex_init(&adata->tb.buf_lock);
+
+ st_sensors_power_enable(indio_dev);
+
+ err = st_sensors_check_device_support(indio_dev,
+ ARRAY_SIZE(st_accel_sensors_settings),
+ st_accel_sensors_settings);
+ if (err < 0)
+ return err;
+
+ adata->num_data_channels = ST_ACCEL_NUMBER_DATA_CHANNELS;
+ adata->multiread_bit = adata->sensor_settings->multi_read_bit;
+ indio_dev->channels = adata->sensor_settings->ch;
+ indio_dev->num_channels = ST_SENSORS_NUMBER_ALL_CHANNELS;
+
+ adata->current_fullscale = (struct st_sensor_fullscale_avl *)
+ &adata->sensor_settings->fs.fs_avl[0];
+ adata->odr = adata->sensor_settings->odr.odr_avl[0].hz;
+
+ if (!adata->dev->platform_data)
+ adata->dev->platform_data =
+ (struct st_sensors_platform_data *)&default_accel_pdata;
+
+ err = st_sensors_init_sensor(indio_dev, adata->dev->platform_data);
+ if (err < 0)
+ return err;
+
+ err = st_accel_allocate_ring(indio_dev);
+ if (err < 0)
+ return err;
+
+ if (irq > 0) {
+ err = st_sensors_allocate_trigger(indio_dev,
+ ST_ACCEL_TRIGGER_OPS);
+ if (err < 0)
+ goto st_accel_probe_trigger_error;
+ }
+
+ err = iio_device_register(indio_dev);
+ if (err)
+ goto st_accel_device_register_error;
+
+ dev_info(&indio_dev->dev, "registered accelerometer %s\n",
+ indio_dev->name);
+
+ return 0;
+
+st_accel_device_register_error:
+ if (irq > 0)
+ st_sensors_deallocate_trigger(indio_dev);
+st_accel_probe_trigger_error:
+ st_accel_deallocate_ring(indio_dev);
+
+ return err;
+}
+EXPORT_SYMBOL(st_accel_common_probe);
+
+void st_accel_common_remove(struct iio_dev *indio_dev)
+{
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ st_sensors_power_disable(indio_dev);
+
+ iio_device_unregister(indio_dev);
+ if (adata->get_irq_data_ready(indio_dev) > 0)
+ st_sensors_deallocate_trigger(indio_dev);
+
+ st_accel_deallocate_ring(indio_dev);
+}
+EXPORT_SYMBOL(st_accel_common_remove);
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics accelerometers driver");
+MODULE_LICENSE("GPL v2");
Code Review / kvmfornfv.git / blobdiff