--- /dev/null
+/*
+ * Copyright (C) 1999-2002 Andre Hedrick <andre@linux-ide.org>
+ * Copyright (C) 2007 MontaVista Software, Inc. <source@mvista.com>
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/ide.h>
+#include <linux/init.h>
+
+#include <asm/io.h>
+
+#define DRV_NAME "aec62xx"
+
+struct chipset_bus_clock_list_entry {
+ u8 xfer_speed;
+ u8 chipset_settings;
+ u8 ultra_settings;
+};
+
+static const struct chipset_bus_clock_list_entry aec6xxx_33_base [] = {
+ { XFER_UDMA_6, 0x31, 0x07 },
+ { XFER_UDMA_5, 0x31, 0x06 },
+ { XFER_UDMA_4, 0x31, 0x05 },
+ { XFER_UDMA_3, 0x31, 0x04 },
+ { XFER_UDMA_2, 0x31, 0x03 },
+ { XFER_UDMA_1, 0x31, 0x02 },
+ { XFER_UDMA_0, 0x31, 0x01 },
+
+ { XFER_MW_DMA_2, 0x31, 0x00 },
+ { XFER_MW_DMA_1, 0x31, 0x00 },
+ { XFER_MW_DMA_0, 0x0a, 0x00 },
+ { XFER_PIO_4, 0x31, 0x00 },
+ { XFER_PIO_3, 0x33, 0x00 },
+ { XFER_PIO_2, 0x08, 0x00 },
+ { XFER_PIO_1, 0x0a, 0x00 },
+ { XFER_PIO_0, 0x00, 0x00 },
+ { 0, 0x00, 0x00 }
+};
+
+static const struct chipset_bus_clock_list_entry aec6xxx_34_base [] = {
+ { XFER_UDMA_6, 0x41, 0x06 },
+ { XFER_UDMA_5, 0x41, 0x05 },
+ { XFER_UDMA_4, 0x41, 0x04 },
+ { XFER_UDMA_3, 0x41, 0x03 },
+ { XFER_UDMA_2, 0x41, 0x02 },
+ { XFER_UDMA_1, 0x41, 0x01 },
+ { XFER_UDMA_0, 0x41, 0x01 },
+
+ { XFER_MW_DMA_2, 0x41, 0x00 },
+ { XFER_MW_DMA_1, 0x42, 0x00 },
+ { XFER_MW_DMA_0, 0x7a, 0x00 },
+ { XFER_PIO_4, 0x41, 0x00 },
+ { XFER_PIO_3, 0x43, 0x00 },
+ { XFER_PIO_2, 0x78, 0x00 },
+ { XFER_PIO_1, 0x7a, 0x00 },
+ { XFER_PIO_0, 0x70, 0x00 },
+ { 0, 0x00, 0x00 }
+};
+
+/*
+ * TO DO: active tuning and correction of cards without a bios.
+ */
+static u8 pci_bus_clock_list (u8 speed, struct chipset_bus_clock_list_entry * chipset_table)
+{
+ for ( ; chipset_table->xfer_speed ; chipset_table++)
+ if (chipset_table->xfer_speed == speed) {
+ return chipset_table->chipset_settings;
+ }
+ return chipset_table->chipset_settings;
+}
+
+static u8 pci_bus_clock_list_ultra (u8 speed, struct chipset_bus_clock_list_entry * chipset_table)
+{
+ for ( ; chipset_table->xfer_speed ; chipset_table++)
+ if (chipset_table->xfer_speed == speed) {
+ return chipset_table->ultra_settings;
+ }
+ return chipset_table->ultra_settings;
+}
+
+static void aec6210_set_mode(ide_hwif_t *hwif, ide_drive_t *drive)
+{
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+ struct ide_host *host = pci_get_drvdata(dev);
+ struct chipset_bus_clock_list_entry *bus_clock = host->host_priv;
+ u16 d_conf = 0;
+ u8 ultra = 0, ultra_conf = 0;
+ u8 tmp0 = 0, tmp1 = 0, tmp2 = 0;
+ const u8 speed = drive->dma_mode;
+ unsigned long flags;
+
+ local_irq_save(flags);
+ /* 0x40|(2*drive->dn): Active, 0x41|(2*drive->dn): Recovery */
+ pci_read_config_word(dev, 0x40|(2*drive->dn), &d_conf);
+ tmp0 = pci_bus_clock_list(speed, bus_clock);
+ d_conf = ((tmp0 & 0xf0) << 4) | (tmp0 & 0xf);
+ pci_write_config_word(dev, 0x40|(2*drive->dn), d_conf);
+
+ tmp1 = 0x00;
+ tmp2 = 0x00;
+ pci_read_config_byte(dev, 0x54, &ultra);
+ tmp1 = ((0x00 << (2*drive->dn)) | (ultra & ~(3 << (2*drive->dn))));
+ ultra_conf = pci_bus_clock_list_ultra(speed, bus_clock);
+ tmp2 = ((ultra_conf << (2*drive->dn)) | (tmp1 & ~(3 << (2*drive->dn))));
+ pci_write_config_byte(dev, 0x54, tmp2);
+ local_irq_restore(flags);
+}
+
+static void aec6260_set_mode(ide_hwif_t *hwif, ide_drive_t *drive)
+{
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+ struct ide_host *host = pci_get_drvdata(dev);
+ struct chipset_bus_clock_list_entry *bus_clock = host->host_priv;
+ u8 unit = drive->dn & 1;
+ u8 tmp1 = 0, tmp2 = 0;
+ u8 ultra = 0, drive_conf = 0, ultra_conf = 0;
+ const u8 speed = drive->dma_mode;
+ unsigned long flags;
+
+ local_irq_save(flags);
+ /* high 4-bits: Active, low 4-bits: Recovery */
+ pci_read_config_byte(dev, 0x40|drive->dn, &drive_conf);
+ drive_conf = pci_bus_clock_list(speed, bus_clock);
+ pci_write_config_byte(dev, 0x40|drive->dn, drive_conf);
+
+ pci_read_config_byte(dev, (0x44|hwif->channel), &ultra);
+ tmp1 = ((0x00 << (4*unit)) | (ultra & ~(7 << (4*unit))));
+ ultra_conf = pci_bus_clock_list_ultra(speed, bus_clock);
+ tmp2 = ((ultra_conf << (4*unit)) | (tmp1 & ~(7 << (4*unit))));
+ pci_write_config_byte(dev, (0x44|hwif->channel), tmp2);
+ local_irq_restore(flags);
+}
+
+static void aec_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
+{
+ drive->dma_mode = drive->pio_mode;
+ hwif->port_ops->set_dma_mode(hwif, drive);
+}
+
+static int init_chipset_aec62xx(struct pci_dev *dev)
+{
+ /* These are necessary to get AEC6280 Macintosh cards to work */
+ if ((dev->device == PCI_DEVICE_ID_ARTOP_ATP865) ||
+ (dev->device == PCI_DEVICE_ID_ARTOP_ATP865R)) {
+ u8 reg49h = 0, reg4ah = 0;
+ /* Clear reset and test bits. */
+ pci_read_config_byte(dev, 0x49, ®49h);
+ pci_write_config_byte(dev, 0x49, reg49h & ~0x30);
+ /* Enable chip interrupt output. */
+ pci_read_config_byte(dev, 0x4a, ®4ah);
+ pci_write_config_byte(dev, 0x4a, reg4ah & ~0x01);
+ /* Enable burst mode. */
+ pci_read_config_byte(dev, 0x4a, ®4ah);
+ pci_write_config_byte(dev, 0x4a, reg4ah | 0x80);
+ }
+
+ return 0;
+}
+
+static u8 atp86x_cable_detect(ide_hwif_t *hwif)
+{
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+ u8 ata66 = 0, mask = hwif->channel ? 0x02 : 0x01;
+
+ pci_read_config_byte(dev, 0x49, &ata66);
+
+ return (ata66 & mask) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
+}
+
+static const struct ide_port_ops atp850_port_ops = {
+ .set_pio_mode = aec_set_pio_mode,
+ .set_dma_mode = aec6210_set_mode,
+};
+
+static const struct ide_port_ops atp86x_port_ops = {
+ .set_pio_mode = aec_set_pio_mode,
+ .set_dma_mode = aec6260_set_mode,
+ .cable_detect = atp86x_cable_detect,
+};
+
+static const struct ide_port_info aec62xx_chipsets[] = {
+ { /* 0: AEC6210 */
+ .name = DRV_NAME,
+ .init_chipset = init_chipset_aec62xx,
+ .enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
+ .port_ops = &atp850_port_ops,
+ .host_flags = IDE_HFLAG_SERIALIZE |
+ IDE_HFLAG_NO_ATAPI_DMA |
+ IDE_HFLAG_NO_DSC |
+ IDE_HFLAG_OFF_BOARD,
+ .pio_mask = ATA_PIO4,
+ .mwdma_mask = ATA_MWDMA2,
+ .udma_mask = ATA_UDMA2,
+ },
+ { /* 1: AEC6260 */
+ .name = DRV_NAME,
+ .init_chipset = init_chipset_aec62xx,
+ .port_ops = &atp86x_port_ops,
+ .host_flags = IDE_HFLAG_NO_ATAPI_DMA | IDE_HFLAG_NO_AUTODMA |
+ IDE_HFLAG_OFF_BOARD,
+ .pio_mask = ATA_PIO4,
+ .mwdma_mask = ATA_MWDMA2,
+ .udma_mask = ATA_UDMA4,
+ },
+ { /* 2: AEC6260R */
+ .name = DRV_NAME,
+ .init_chipset = init_chipset_aec62xx,
+ .enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
+ .port_ops = &atp86x_port_ops,
+ .host_flags = IDE_HFLAG_NO_ATAPI_DMA |
+ IDE_HFLAG_NON_BOOTABLE,
+ .pio_mask = ATA_PIO4,
+ .mwdma_mask = ATA_MWDMA2,
+ .udma_mask = ATA_UDMA4,
+ },
+ { /* 3: AEC6280 */
+ .name = DRV_NAME,
+ .init_chipset = init_chipset_aec62xx,
+ .port_ops = &atp86x_port_ops,
+ .host_flags = IDE_HFLAG_NO_ATAPI_DMA |
+ IDE_HFLAG_OFF_BOARD,
+ .pio_mask = ATA_PIO4,
+ .mwdma_mask = ATA_MWDMA2,
+ .udma_mask = ATA_UDMA5,
+ },
+ { /* 4: AEC6280R */
+ .name = DRV_NAME,
+ .init_chipset = init_chipset_aec62xx,
+ .enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
+ .port_ops = &atp86x_port_ops,
+ .host_flags = IDE_HFLAG_NO_ATAPI_DMA |
+ IDE_HFLAG_OFF_BOARD,
+ .pio_mask = ATA_PIO4,
+ .mwdma_mask = ATA_MWDMA2,
+ .udma_mask = ATA_UDMA5,
+ }
+};
+
+/**
+ * aec62xx_init_one - called when a AEC is found
+ * @dev: the aec62xx device
+ * @id: the matching pci id
+ *
+ * Called when the PCI registration layer (or the IDE initialization)
+ * finds a device matching our IDE device tables.
+ *
+ * NOTE: since we're going to modify the 'name' field for AEC-6[26]80[R]
+ * chips, pass a local copy of 'struct ide_port_info' down the call chain.
+ */
+
+static int aec62xx_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+{
+ const struct chipset_bus_clock_list_entry *bus_clock;
+ struct ide_port_info d;
+ u8 idx = id->driver_data;
+ int bus_speed = ide_pci_clk ? ide_pci_clk : 33;
+ int err;
+
+ if (bus_speed <= 33)
+ bus_clock = aec6xxx_33_base;
+ else
+ bus_clock = aec6xxx_34_base;
+
+ err = pci_enable_device(dev);
+ if (err)
+ return err;
+
+ d = aec62xx_chipsets[idx];
+
+ if (idx == 3 || idx == 4) {
+ unsigned long dma_base = pci_resource_start(dev, 4);
+
+ if (inb(dma_base + 2) & 0x10) {
+ printk(KERN_INFO DRV_NAME " %s: AEC6880%s card detected"
+ "\n", pci_name(dev), (idx == 4) ? "R" : "");
+ d.udma_mask = ATA_UDMA6;
+ }
+ }
+
+ err = ide_pci_init_one(dev, &d, (void *)bus_clock);
+ if (err)
+ pci_disable_device(dev);
+
+ return err;
+}
+
+static void aec62xx_remove(struct pci_dev *dev)
+{
+ ide_pci_remove(dev);
+ pci_disable_device(dev);
+}
+
+static const struct pci_device_id aec62xx_pci_tbl[] = {
+ { PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP850UF), 0 },
+ { PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP860), 1 },
+ { PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP860R), 2 },
+ { PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP865), 3 },
+ { PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP865R), 4 },
+ { 0, },
+};
+MODULE_DEVICE_TABLE(pci, aec62xx_pci_tbl);
+
+static struct pci_driver aec62xx_pci_driver = {
+ .name = "AEC62xx_IDE",
+ .id_table = aec62xx_pci_tbl,
+ .probe = aec62xx_init_one,
+ .remove = aec62xx_remove,
+ .suspend = ide_pci_suspend,
+ .resume = ide_pci_resume,
+};
+
+static int __init aec62xx_ide_init(void)
+{
+ return ide_pci_register_driver(&aec62xx_pci_driver);
+}
+
+static void __exit aec62xx_ide_exit(void)
+{
+ pci_unregister_driver(&aec62xx_pci_driver);
+}
+
+module_init(aec62xx_ide_init);
+module_exit(aec62xx_ide_exit);
+
+MODULE_AUTHOR("Andre Hedrick");
+MODULE_DESCRIPTION("PCI driver module for ARTOP AEC62xx IDE");
+MODULE_LICENSE("GPL");
Code Review / kvmfornfv.git / blobdiff