--- /dev/null
+/*
+ * Copyright 2011 Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+#ifndef RV6XXD_H
+#define RV6XXD_H
+
+/* RV6xx power management */
+#define SPLL_CNTL_MODE 0x60c
+# define SPLL_DIV_SYNC (1 << 5)
+
+#define GENERAL_PWRMGT 0x618
+# define GLOBAL_PWRMGT_EN (1 << 0)
+# define STATIC_PM_EN (1 << 1)
+# define MOBILE_SU (1 << 2)
+# define THERMAL_PROTECTION_DIS (1 << 3)
+# define THERMAL_PROTECTION_TYPE (1 << 4)
+# define ENABLE_GEN2PCIE (1 << 5)
+# define SW_GPIO_INDEX(x) ((x) << 6)
+# define SW_GPIO_INDEX_MASK (3 << 6)
+# define LOW_VOLT_D2_ACPI (1 << 8)
+# define LOW_VOLT_D3_ACPI (1 << 9)
+# define VOLT_PWRMGT_EN (1 << 10)
+# define BACKBIAS_PAD_EN (1 << 16)
+# define BACKBIAS_VALUE (1 << 17)
+# define BACKBIAS_DPM_CNTL (1 << 18)
+# define DYN_SPREAD_SPECTRUM_EN (1 << 21)
+
+#define MCLK_PWRMGT_CNTL 0x624
+# define MPLL_PWRMGT_OFF (1 << 0)
+# define YCLK_TURNOFF (1 << 1)
+# define MPLL_TURNOFF (1 << 2)
+# define SU_MCLK_USE_BCLK (1 << 3)
+# define DLL_READY (1 << 4)
+# define MC_BUSY (1 << 5)
+# define MC_INT_CNTL (1 << 7)
+# define MRDCKA_SLEEP (1 << 8)
+# define MRDCKB_SLEEP (1 << 9)
+# define MRDCKC_SLEEP (1 << 10)
+# define MRDCKD_SLEEP (1 << 11)
+# define MRDCKE_SLEEP (1 << 12)
+# define MRDCKF_SLEEP (1 << 13)
+# define MRDCKG_SLEEP (1 << 14)
+# define MRDCKH_SLEEP (1 << 15)
+# define MRDCKA_RESET (1 << 16)
+# define MRDCKB_RESET (1 << 17)
+# define MRDCKC_RESET (1 << 18)
+# define MRDCKD_RESET (1 << 19)
+# define MRDCKE_RESET (1 << 20)
+# define MRDCKF_RESET (1 << 21)
+# define MRDCKG_RESET (1 << 22)
+# define MRDCKH_RESET (1 << 23)
+# define DLL_READY_READ (1 << 24)
+# define USE_DISPLAY_GAP (1 << 25)
+# define USE_DISPLAY_URGENT_NORMAL (1 << 26)
+# define USE_DISPLAY_GAP_CTXSW (1 << 27)
+# define MPLL_TURNOFF_D2 (1 << 28)
+# define USE_DISPLAY_URGENT_CTXSW (1 << 29)
+
+#define MPLL_FREQ_LEVEL_0 0x6e8
+# define LEVEL0_MPLL_POST_DIV(x) ((x) << 0)
+# define LEVEL0_MPLL_POST_DIV_MASK (0xff << 0)
+# define LEVEL0_MPLL_FB_DIV(x) ((x) << 8)
+# define LEVEL0_MPLL_FB_DIV_MASK (0xfff << 8)
+# define LEVEL0_MPLL_REF_DIV(x) ((x) << 20)
+# define LEVEL0_MPLL_REF_DIV_MASK (0x3f << 20)
+# define LEVEL0_MPLL_DIV_EN (1 << 28)
+# define LEVEL0_DLL_BYPASS (1 << 29)
+# define LEVEL0_DLL_RESET (1 << 30)
+
+#define VID_RT 0x6f8
+# define VID_CRT(x) ((x) << 0)
+# define VID_CRT_MASK (0x1fff << 0)
+# define VID_CRTU(x) ((x) << 13)
+# define VID_CRTU_MASK (7 << 13)
+# define SSTU(x) ((x) << 16)
+# define SSTU_MASK (7 << 16)
+# define VID_SWT(x) ((x) << 19)
+# define VID_SWT_MASK (0x1f << 19)
+# define BRT(x) ((x) << 24)
+# define BRT_MASK (0xff << 24)
+
+#define TARGET_AND_CURRENT_PROFILE_INDEX 0x70c
+# define TARGET_PROFILE_INDEX_MASK (3 << 0)
+# define TARGET_PROFILE_INDEX_SHIFT 0
+# define CURRENT_PROFILE_INDEX_MASK (3 << 2)
+# define CURRENT_PROFILE_INDEX_SHIFT 2
+# define DYN_PWR_ENTER_INDEX(x) ((x) << 4)
+# define DYN_PWR_ENTER_INDEX_MASK (3 << 4)
+# define DYN_PWR_ENTER_INDEX_SHIFT 4
+# define CURR_MCLK_INDEX_MASK (3 << 6)
+# define CURR_MCLK_INDEX_SHIFT 6
+# define CURR_SCLK_INDEX_MASK (0x1f << 8)
+# define CURR_SCLK_INDEX_SHIFT 8
+# define CURR_VID_INDEX_MASK (3 << 13)
+# define CURR_VID_INDEX_SHIFT 13
+
+#define VID_UPPER_GPIO_CNTL 0x740
+# define CTXSW_UPPER_GPIO_VALUES(x) ((x) << 0)
+# define CTXSW_UPPER_GPIO_VALUES_MASK (7 << 0)
+# define HIGH_UPPER_GPIO_VALUES(x) ((x) << 3)
+# define HIGH_UPPER_GPIO_VALUES_MASK (7 << 3)
+# define MEDIUM_UPPER_GPIO_VALUES(x) ((x) << 6)
+# define MEDIUM_UPPER_GPIO_VALUES_MASK (7 << 6)
+# define LOW_UPPER_GPIO_VALUES(x) ((x) << 9)
+# define LOW_UPPER_GPIO_VALUES_MASK (7 << 9)
+# define CTXSW_BACKBIAS_VALUE (1 << 12)
+# define HIGH_BACKBIAS_VALUE (1 << 13)
+# define MEDIUM_BACKBIAS_VALUE (1 << 14)
+# define LOW_BACKBIAS_VALUE (1 << 15)
+
+#define CG_DISPLAY_GAP_CNTL 0x7dc
+# define DISP1_GAP(x) ((x) << 0)
+# define DISP1_GAP_MASK (3 << 0)
+# define DISP2_GAP(x) ((x) << 2)
+# define DISP2_GAP_MASK (3 << 2)
+# define VBI_TIMER_COUNT(x) ((x) << 4)
+# define VBI_TIMER_COUNT_MASK (0x3fff << 4)
+# define VBI_TIMER_UNIT(x) ((x) << 20)
+# define VBI_TIMER_UNIT_MASK (7 << 20)
+# define DISP1_GAP_MCHG(x) ((x) << 24)
+# define DISP1_GAP_MCHG_MASK (3 << 24)
+# define DISP2_GAP_MCHG(x) ((x) << 26)
+# define DISP2_GAP_MCHG_MASK (3 << 26)
+
+#define CG_THERMAL_CTRL 0x7f0
+# define DPM_EVENT_SRC(x) ((x) << 0)
+# define DPM_EVENT_SRC_MASK (7 << 0)
+# define THERM_INC_CLK (1 << 3)
+# define TOFFSET(x) ((x) << 4)
+# define TOFFSET_MASK (0xff << 4)
+# define DIG_THERM_DPM(x) ((x) << 12)
+# define DIG_THERM_DPM_MASK (0xff << 12)
+# define CTF_SEL(x) ((x) << 20)
+# define CTF_SEL_MASK (7 << 20)
+# define CTF_PAD_POLARITY (1 << 23)
+# define CTF_PAD_EN (1 << 24)
+
+#define CG_SPLL_SPREAD_SPECTRUM_LOW 0x820
+# define SSEN (1 << 0)
+# define CLKS(x) ((x) << 3)
+# define CLKS_MASK (0xff << 3)
+# define CLKS_SHIFT 3
+# define CLKV(x) ((x) << 11)
+# define CLKV_MASK (0x7ff << 11)
+# define CLKV_SHIFT 11
+#define CG_MPLL_SPREAD_SPECTRUM 0x830
+
+#define CITF_CNTL 0x200c
+# define BLACKOUT_RD (1 << 0)
+# define BLACKOUT_WR (1 << 1)
+
+#define RAMCFG 0x2408
+#define NOOFBANK_SHIFT 0
+#define NOOFBANK_MASK 0x00000001
+#define NOOFRANK_SHIFT 1
+#define NOOFRANK_MASK 0x00000002
+#define NOOFROWS_SHIFT 2
+#define NOOFROWS_MASK 0x0000001C
+#define NOOFCOLS_SHIFT 5
+#define NOOFCOLS_MASK 0x00000060
+#define CHANSIZE_SHIFT 7
+#define CHANSIZE_MASK 0x00000080
+#define BURSTLENGTH_SHIFT 8
+#define BURSTLENGTH_MASK 0x00000100
+#define CHANSIZE_OVERRIDE (1 << 10)
+
+#define SQM_RATIO 0x2424
+# define STATE0(x) ((x) << 0)
+# define STATE0_MASK (0xff << 0)
+# define STATE1(x) ((x) << 8)
+# define STATE1_MASK (0xff << 8)
+# define STATE2(x) ((x) << 16)
+# define STATE2_MASK (0xff << 16)
+# define STATE3(x) ((x) << 24)
+# define STATE3_MASK (0xff << 24)
+
+#define ARB_RFSH_CNTL 0x2460
+# define ENABLE (1 << 0)
+#define ARB_RFSH_RATE 0x2464
+# define POWERMODE0(x) ((x) << 0)
+# define POWERMODE0_MASK (0xff << 0)
+# define POWERMODE1(x) ((x) << 8)
+# define POWERMODE1_MASK (0xff << 8)
+# define POWERMODE2(x) ((x) << 16)
+# define POWERMODE2_MASK (0xff << 16)
+# define POWERMODE3(x) ((x) << 24)
+# define POWERMODE3_MASK (0xff << 24)
+
+#define MC_SEQ_DRAM 0x2608
+# define CKE_DYN (1 << 12)
+
+#define MC_SEQ_CMD 0x26c4
+
+#define MC_SEQ_RESERVE_S 0x2890
+#define MC_SEQ_RESERVE_M 0x2894
+
+#define LVTMA_DATA_SYNCHRONIZATION 0x7adc
+# define LVTMA_PFREQCHG (1 << 8)
+#define DCE3_LVTMA_DATA_SYNCHRONIZATION 0x7f98
+
+/* PCIE indirect regs */
+#define PCIE_P_CNTL 0x40
+# define P_PLL_PWRDN_IN_L1L23 (1 << 3)
+# define P_PLL_BUF_PDNB (1 << 4)
+# define P_PLL_PDNB (1 << 9)
+# define P_ALLOW_PRX_FRONTEND_SHUTOFF (1 << 12)
+/* PCIE PORT indirect regs */
+#define PCIE_LC_CNTL 0xa0
+# define LC_L0S_INACTIVITY(x) ((x) << 8)
+# define LC_L0S_INACTIVITY_MASK (0xf << 8)
+# define LC_L0S_INACTIVITY_SHIFT 8
+# define LC_L1_INACTIVITY(x) ((x) << 12)
+# define LC_L1_INACTIVITY_MASK (0xf << 12)
+# define LC_L1_INACTIVITY_SHIFT 12
+# define LC_PMI_TO_L1_DIS (1 << 16)
+# define LC_ASPM_TO_L1_DIS (1 << 24)
+#define PCIE_LC_SPEED_CNTL 0xa4
+# define LC_GEN2_EN (1 << 0)
+# define LC_INITIATE_LINK_SPEED_CHANGE (1 << 7)
+# define LC_CURRENT_DATA_RATE (1 << 11)
+# define LC_HW_VOLTAGE_IF_CONTROL(x) ((x) << 12)
+# define LC_HW_VOLTAGE_IF_CONTROL_MASK (3 << 12)
+# define LC_HW_VOLTAGE_IF_CONTROL_SHIFT 12
+# define LC_OTHER_SIDE_EVER_SENT_GEN2 (1 << 23)
+# define LC_OTHER_SIDE_SUPPORTS_GEN2 (1 << 24)
+
+#endif
Code Review / kvmfornfv.git / blobdiff