Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / drivers / gpu / drm / msm / hdmi / hdmi_phy_8x60.c
diff --git a/kernel/drivers/gpu/drm/msm/hdmi/hdmi_phy_8x60.c b/kernel/drivers/gpu/drm/msm/hdmi/hdmi_phy_8x60.c
new file mode 100644 (file)
index 0000000..391433c
--- /dev/null
@@ -0,0 +1,214 @@
+/*
+ * Copyright (C) 2013 Red Hat
+ * Author: Rob Clark <robdclark@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "hdmi.h"
+
+struct hdmi_phy_8x60 {
+       struct hdmi_phy base;
+       struct hdmi *hdmi;
+};
+#define to_hdmi_phy_8x60(x) container_of(x, struct hdmi_phy_8x60, base)
+
+static void hdmi_phy_8x60_destroy(struct hdmi_phy *phy)
+{
+       struct hdmi_phy_8x60 *phy_8x60 = to_hdmi_phy_8x60(phy);
+       kfree(phy_8x60);
+}
+
+static void hdmi_phy_8x60_reset(struct hdmi_phy *phy)
+{
+       struct hdmi_phy_8x60 *phy_8x60 = to_hdmi_phy_8x60(phy);
+       struct hdmi *hdmi = phy_8x60->hdmi;
+       unsigned int val;
+
+       val = hdmi_read(hdmi, REG_HDMI_PHY_CTRL);
+
+       if (val & HDMI_PHY_CTRL_SW_RESET_LOW) {
+               /* pull low */
+               hdmi_write(hdmi, REG_HDMI_PHY_CTRL,
+                               val & ~HDMI_PHY_CTRL_SW_RESET);
+       } else {
+               /* pull high */
+               hdmi_write(hdmi, REG_HDMI_PHY_CTRL,
+                               val | HDMI_PHY_CTRL_SW_RESET);
+       }
+
+       msleep(100);
+
+       if (val & HDMI_PHY_CTRL_SW_RESET_LOW) {
+               /* pull high */
+               hdmi_write(hdmi, REG_HDMI_PHY_CTRL,
+                               val | HDMI_PHY_CTRL_SW_RESET);
+       } else {
+               /* pull low */
+               hdmi_write(hdmi, REG_HDMI_PHY_CTRL,
+                               val & ~HDMI_PHY_CTRL_SW_RESET);
+       }
+}
+
+static void hdmi_phy_8x60_powerup(struct hdmi_phy *phy,
+               unsigned long int pixclock)
+{
+       struct hdmi_phy_8x60 *phy_8x60 = to_hdmi_phy_8x60(phy);
+       struct hdmi *hdmi = phy_8x60->hdmi;
+
+       /* De-serializer delay D/C for non-lbk mode: */
+       hdmi_write(hdmi, REG_HDMI_8x60_PHY_REG0,
+                       HDMI_8x60_PHY_REG0_DESER_DEL_CTRL(3));
+
+       if (pixclock == 27000000) {
+               /* video_format == HDMI_VFRMT_720x480p60_16_9 */
+               hdmi_write(hdmi, REG_HDMI_8x60_PHY_REG1,
+                               HDMI_8x60_PHY_REG1_DTEST_MUX_SEL(5) |
+                               HDMI_8x60_PHY_REG1_OUTVOL_SWING_CTRL(3));
+       } else {
+               hdmi_write(hdmi, REG_HDMI_8x60_PHY_REG1,
+                               HDMI_8x60_PHY_REG1_DTEST_MUX_SEL(5) |
+                               HDMI_8x60_PHY_REG1_OUTVOL_SWING_CTRL(4));
+       }
+
+       /* No matter what, start from the power down mode: */
+       hdmi_write(hdmi, REG_HDMI_8x60_PHY_REG2,
+                       HDMI_8x60_PHY_REG2_PD_PWRGEN |
+                       HDMI_8x60_PHY_REG2_PD_PLL |
+                       HDMI_8x60_PHY_REG2_PD_DRIVE_4 |
+                       HDMI_8x60_PHY_REG2_PD_DRIVE_3 |
+                       HDMI_8x60_PHY_REG2_PD_DRIVE_2 |
+                       HDMI_8x60_PHY_REG2_PD_DRIVE_1 |
+                       HDMI_8x60_PHY_REG2_PD_DESER);
+
+       /* Turn PowerGen on: */
+       hdmi_write(hdmi, REG_HDMI_8x60_PHY_REG2,
+                       HDMI_8x60_PHY_REG2_PD_PLL |
+                       HDMI_8x60_PHY_REG2_PD_DRIVE_4 |
+                       HDMI_8x60_PHY_REG2_PD_DRIVE_3 |
+                       HDMI_8x60_PHY_REG2_PD_DRIVE_2 |
+                       HDMI_8x60_PHY_REG2_PD_DRIVE_1 |
+                       HDMI_8x60_PHY_REG2_PD_DESER);
+
+       /* Turn PLL power on: */
+       hdmi_write(hdmi, REG_HDMI_8x60_PHY_REG2,
+                       HDMI_8x60_PHY_REG2_PD_DRIVE_4 |
+                       HDMI_8x60_PHY_REG2_PD_DRIVE_3 |
+                       HDMI_8x60_PHY_REG2_PD_DRIVE_2 |
+                       HDMI_8x60_PHY_REG2_PD_DRIVE_1 |
+                       HDMI_8x60_PHY_REG2_PD_DESER);
+
+       /* Write to HIGH after PLL power down de-assert: */
+       hdmi_write(hdmi, REG_HDMI_8x60_PHY_REG3,
+                       HDMI_8x60_PHY_REG3_PLL_ENABLE);
+
+       /* ASIC power on; PHY REG9 = 0 */
+       hdmi_write(hdmi, REG_HDMI_8x60_PHY_REG9, 0);
+
+       /* Enable PLL lock detect, PLL lock det will go high after lock
+        * Enable the re-time logic
+        */
+       hdmi_write(hdmi, REG_HDMI_8x60_PHY_REG12,
+                       HDMI_8x60_PHY_REG12_RETIMING_EN |
+                       HDMI_8x60_PHY_REG12_PLL_LOCK_DETECT_EN);
+
+       /* Drivers are on: */
+       hdmi_write(hdmi, REG_HDMI_8x60_PHY_REG2,
+                       HDMI_8x60_PHY_REG2_PD_DESER);
+
+       /* If the RX detector is needed: */
+       hdmi_write(hdmi, REG_HDMI_8x60_PHY_REG2,
+                       HDMI_8x60_PHY_REG2_RCV_SENSE_EN |
+                       HDMI_8x60_PHY_REG2_PD_DESER);
+
+       hdmi_write(hdmi, REG_HDMI_8x60_PHY_REG4, 0);
+       hdmi_write(hdmi, REG_HDMI_8x60_PHY_REG5, 0);
+       hdmi_write(hdmi, REG_HDMI_8x60_PHY_REG6, 0);
+       hdmi_write(hdmi, REG_HDMI_8x60_PHY_REG7, 0);
+       hdmi_write(hdmi, REG_HDMI_8x60_PHY_REG8, 0);
+       hdmi_write(hdmi, REG_HDMI_8x60_PHY_REG9, 0);
+       hdmi_write(hdmi, REG_HDMI_8x60_PHY_REG10, 0);
+       hdmi_write(hdmi, REG_HDMI_8x60_PHY_REG11, 0);
+
+       /* If we want to use lock enable based on counting: */
+       hdmi_write(hdmi, REG_HDMI_8x60_PHY_REG12,
+                       HDMI_8x60_PHY_REG12_RETIMING_EN |
+                       HDMI_8x60_PHY_REG12_PLL_LOCK_DETECT_EN |
+                       HDMI_8x60_PHY_REG12_FORCE_LOCK);
+}
+
+static void hdmi_phy_8x60_powerdown(struct hdmi_phy *phy)
+{
+       struct hdmi_phy_8x60 *phy_8x60 = to_hdmi_phy_8x60(phy);
+       struct hdmi *hdmi = phy_8x60->hdmi;
+
+       /* Assert RESET PHY from controller */
+       hdmi_write(hdmi, REG_HDMI_PHY_CTRL,
+                       HDMI_PHY_CTRL_SW_RESET);
+       udelay(10);
+       /* De-assert RESET PHY from controller */
+       hdmi_write(hdmi, REG_HDMI_PHY_CTRL, 0);
+       /* Turn off Driver */
+       hdmi_write(hdmi, REG_HDMI_8x60_PHY_REG2,
+                       HDMI_8x60_PHY_REG2_PD_DRIVE_4 |
+                       HDMI_8x60_PHY_REG2_PD_DRIVE_3 |
+                       HDMI_8x60_PHY_REG2_PD_DRIVE_2 |
+                       HDMI_8x60_PHY_REG2_PD_DRIVE_1 |
+                       HDMI_8x60_PHY_REG2_PD_DESER);
+       udelay(10);
+       /* Disable PLL */
+       hdmi_write(hdmi, REG_HDMI_8x60_PHY_REG3, 0);
+       /* Power down PHY, but keep RX-sense: */
+       hdmi_write(hdmi, REG_HDMI_8x60_PHY_REG2,
+                       HDMI_8x60_PHY_REG2_RCV_SENSE_EN |
+                       HDMI_8x60_PHY_REG2_PD_PWRGEN |
+                       HDMI_8x60_PHY_REG2_PD_PLL |
+                       HDMI_8x60_PHY_REG2_PD_DRIVE_4 |
+                       HDMI_8x60_PHY_REG2_PD_DRIVE_3 |
+                       HDMI_8x60_PHY_REG2_PD_DRIVE_2 |
+                       HDMI_8x60_PHY_REG2_PD_DRIVE_1 |
+                       HDMI_8x60_PHY_REG2_PD_DESER);
+}
+
+static const struct hdmi_phy_funcs hdmi_phy_8x60_funcs = {
+               .destroy = hdmi_phy_8x60_destroy,
+               .reset = hdmi_phy_8x60_reset,
+               .powerup = hdmi_phy_8x60_powerup,
+               .powerdown = hdmi_phy_8x60_powerdown,
+};
+
+struct hdmi_phy *hdmi_phy_8x60_init(struct hdmi *hdmi)
+{
+       struct hdmi_phy_8x60 *phy_8x60;
+       struct hdmi_phy *phy = NULL;
+       int ret;
+
+       phy_8x60 = kzalloc(sizeof(*phy_8x60), GFP_KERNEL);
+       if (!phy_8x60) {
+               ret = -ENOMEM;
+               goto fail;
+       }
+
+       phy = &phy_8x60->base;
+
+       phy->funcs = &hdmi_phy_8x60_funcs;
+
+       phy_8x60->hdmi = hdmi;
+
+       return phy;
+
+fail:
+       if (phy)
+               hdmi_phy_8x60_destroy(phy);
+       return ERR_PTR(ret);
+}