--- /dev/null
+/*
+ * Copyright (c) 2012-2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+
+#include "dsi_pll.h"
+#include "dsi.xml.h"
+
+/*
+ * DSI PLL 28nm - clock diagram (eg: DSI0):
+ *
+ * dsi0analog_postdiv_clk
+ * | dsi0indirect_path_div2_clk
+ * | |
+ * +------+ | +----+ | |\ dsi0byte_mux
+ * dsi0vco_clk --o--| DIV1 |--o--| /2 |--o--| \ |
+ * | +------+ +----+ | m| | +----+
+ * | | u|--o--| /4 |-- dsi0pllbyte
+ * | | x| +----+
+ * o--------------------------| /
+ * | |/
+ * | +------+
+ * o----------| DIV3 |------------------------- dsi0pll
+ * +------+
+ */
+
+#define POLL_MAX_READS 10
+#define POLL_TIMEOUT_US 50
+
+#define NUM_PROVIDED_CLKS 2
+
+#define VCO_REF_CLK_RATE 19200000
+#define VCO_MIN_RATE 350000000
+#define VCO_MAX_RATE 750000000
+
+#define DSI_BYTE_PLL_CLK 0
+#define DSI_PIXEL_PLL_CLK 1
+
+#define LPFR_LUT_SIZE 10
+struct lpfr_cfg {
+ unsigned long vco_rate;
+ u32 resistance;
+};
+
+/* Loop filter resistance: */
+static const struct lpfr_cfg lpfr_lut[LPFR_LUT_SIZE] = {
+ { 479500000, 8 },
+ { 480000000, 11 },
+ { 575500000, 8 },
+ { 576000000, 12 },
+ { 610500000, 8 },
+ { 659500000, 9 },
+ { 671500000, 10 },
+ { 672000000, 14 },
+ { 708500000, 10 },
+ { 750000000, 11 },
+};
+
+struct pll_28nm_cached_state {
+ unsigned long vco_rate;
+ u8 postdiv3;
+ u8 postdiv1;
+ u8 byte_mux;
+};
+
+struct dsi_pll_28nm {
+ struct msm_dsi_pll base;
+
+ int id;
+ struct platform_device *pdev;
+ void __iomem *mmio;
+
+ int vco_delay;
+
+ /* private clocks: */
+ struct clk *clks[NUM_DSI_CLOCKS_MAX];
+ u32 num_clks;
+
+ /* clock-provider: */
+ struct clk *provided_clks[NUM_PROVIDED_CLKS];
+ struct clk_onecell_data clk_data;
+
+ struct pll_28nm_cached_state cached_state;
+};
+
+#define to_pll_28nm(x) container_of(x, struct dsi_pll_28nm, base)
+
+static bool pll_28nm_poll_for_ready(struct dsi_pll_28nm *pll_28nm,
+ u32 nb_tries, u32 timeout_us)
+{
+ bool pll_locked = false;
+ u32 val;
+
+ while (nb_tries--) {
+ val = pll_read(pll_28nm->mmio + REG_DSI_28nm_PHY_PLL_STATUS);
+ pll_locked = !!(val & DSI_28nm_PHY_PLL_STATUS_PLL_RDY);
+
+ if (pll_locked)
+ break;
+
+ udelay(timeout_us);
+ }
+ DBG("DSI PLL is %slocked", pll_locked ? "" : "*not* ");
+
+ return pll_locked;
+}
+
+static void pll_28nm_software_reset(struct dsi_pll_28nm *pll_28nm)
+{
+ void __iomem *base = pll_28nm->mmio;
+
+ /*
+ * Add HW recommended delays after toggling the software
+ * reset bit off and back on.
+ */
+ pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_TEST_CFG,
+ DSI_28nm_PHY_PLL_TEST_CFG_PLL_SW_RESET, 1);
+ pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_TEST_CFG, 0x00, 1);
+}
+
+/*
+ * Clock Callbacks
+ */
+static int dsi_pll_28nm_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
+ struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
+ struct device *dev = &pll_28nm->pdev->dev;
+ void __iomem *base = pll_28nm->mmio;
+ unsigned long div_fbx1000, gen_vco_clk;
+ u32 refclk_cfg, frac_n_mode, frac_n_value;
+ u32 sdm_cfg0, sdm_cfg1, sdm_cfg2, sdm_cfg3;
+ u32 cal_cfg10, cal_cfg11;
+ u32 rem;
+ int i;
+
+ VERB("rate=%lu, parent's=%lu", rate, parent_rate);
+
+ /* Force postdiv2 to be div-4 */
+ pll_write(base + REG_DSI_28nm_PHY_PLL_POSTDIV2_CFG, 3);
+
+ /* Configure the Loop filter resistance */
+ for (i = 0; i < LPFR_LUT_SIZE; i++)
+ if (rate <= lpfr_lut[i].vco_rate)
+ break;
+ if (i == LPFR_LUT_SIZE) {
+ dev_err(dev, "unable to get loop filter resistance. vco=%lu\n",
+ rate);
+ return -EINVAL;
+ }
+ pll_write(base + REG_DSI_28nm_PHY_PLL_LPFR_CFG, lpfr_lut[i].resistance);
+
+ /* Loop filter capacitance values : c1 and c2 */
+ pll_write(base + REG_DSI_28nm_PHY_PLL_LPFC1_CFG, 0x70);
+ pll_write(base + REG_DSI_28nm_PHY_PLL_LPFC2_CFG, 0x15);
+
+ rem = rate % VCO_REF_CLK_RATE;
+ if (rem) {
+ refclk_cfg = DSI_28nm_PHY_PLL_REFCLK_CFG_DBLR;
+ frac_n_mode = 1;
+ div_fbx1000 = rate / (VCO_REF_CLK_RATE / 500);
+ gen_vco_clk = div_fbx1000 * (VCO_REF_CLK_RATE / 500);
+ } else {
+ refclk_cfg = 0x0;
+ frac_n_mode = 0;
+ div_fbx1000 = rate / (VCO_REF_CLK_RATE / 1000);
+ gen_vco_clk = div_fbx1000 * (VCO_REF_CLK_RATE / 1000);
+ }
+
+ DBG("refclk_cfg = %d", refclk_cfg);
+
+ rem = div_fbx1000 % 1000;
+ frac_n_value = (rem << 16) / 1000;
+
+ DBG("div_fb = %lu", div_fbx1000);
+ DBG("frac_n_value = %d", frac_n_value);
+
+ DBG("Generated VCO Clock: %lu", gen_vco_clk);
+ rem = 0;
+ sdm_cfg1 = pll_read(base + REG_DSI_28nm_PHY_PLL_SDM_CFG1);
+ sdm_cfg1 &= ~DSI_28nm_PHY_PLL_SDM_CFG1_DC_OFFSET__MASK;
+ if (frac_n_mode) {
+ sdm_cfg0 = 0x0;
+ sdm_cfg0 |= DSI_28nm_PHY_PLL_SDM_CFG0_BYP_DIV(0);
+ sdm_cfg1 |= DSI_28nm_PHY_PLL_SDM_CFG1_DC_OFFSET(
+ (u32)(((div_fbx1000 / 1000) & 0x3f) - 1));
+ sdm_cfg3 = frac_n_value >> 8;
+ sdm_cfg2 = frac_n_value & 0xff;
+ } else {
+ sdm_cfg0 = DSI_28nm_PHY_PLL_SDM_CFG0_BYP;
+ sdm_cfg0 |= DSI_28nm_PHY_PLL_SDM_CFG0_BYP_DIV(
+ (u32)(((div_fbx1000 / 1000) & 0x3f) - 1));
+ sdm_cfg1 |= DSI_28nm_PHY_PLL_SDM_CFG1_DC_OFFSET(0);
+ sdm_cfg2 = 0;
+ sdm_cfg3 = 0;
+ }
+
+ DBG("sdm_cfg0=%d", sdm_cfg0);
+ DBG("sdm_cfg1=%d", sdm_cfg1);
+ DBG("sdm_cfg2=%d", sdm_cfg2);
+ DBG("sdm_cfg3=%d", sdm_cfg3);
+
+ cal_cfg11 = (u32)(gen_vco_clk / (256 * 1000000));
+ cal_cfg10 = (u32)((gen_vco_clk % (256 * 1000000)) / 1000000);
+ DBG("cal_cfg10=%d, cal_cfg11=%d", cal_cfg10, cal_cfg11);
+
+ pll_write(base + REG_DSI_28nm_PHY_PLL_CHGPUMP_CFG, 0x02);
+ pll_write(base + REG_DSI_28nm_PHY_PLL_CAL_CFG3, 0x2b);
+ pll_write(base + REG_DSI_28nm_PHY_PLL_CAL_CFG4, 0x06);
+ pll_write(base + REG_DSI_28nm_PHY_PLL_LKDET_CFG2, 0x0d);
+
+ pll_write(base + REG_DSI_28nm_PHY_PLL_SDM_CFG1, sdm_cfg1);
+ pll_write(base + REG_DSI_28nm_PHY_PLL_SDM_CFG2,
+ DSI_28nm_PHY_PLL_SDM_CFG2_FREQ_SEED_7_0(sdm_cfg2));
+ pll_write(base + REG_DSI_28nm_PHY_PLL_SDM_CFG3,
+ DSI_28nm_PHY_PLL_SDM_CFG3_FREQ_SEED_15_8(sdm_cfg3));
+ pll_write(base + REG_DSI_28nm_PHY_PLL_SDM_CFG4, 0x00);
+
+ /* Add hardware recommended delay for correct PLL configuration */
+ if (pll_28nm->vco_delay)
+ udelay(pll_28nm->vco_delay);
+
+ pll_write(base + REG_DSI_28nm_PHY_PLL_REFCLK_CFG, refclk_cfg);
+ pll_write(base + REG_DSI_28nm_PHY_PLL_PWRGEN_CFG, 0x00);
+ pll_write(base + REG_DSI_28nm_PHY_PLL_VCOLPF_CFG, 0x31);
+ pll_write(base + REG_DSI_28nm_PHY_PLL_SDM_CFG0, sdm_cfg0);
+ pll_write(base + REG_DSI_28nm_PHY_PLL_CAL_CFG0, 0x12);
+ pll_write(base + REG_DSI_28nm_PHY_PLL_CAL_CFG6, 0x30);
+ pll_write(base + REG_DSI_28nm_PHY_PLL_CAL_CFG7, 0x00);
+ pll_write(base + REG_DSI_28nm_PHY_PLL_CAL_CFG8, 0x60);
+ pll_write(base + REG_DSI_28nm_PHY_PLL_CAL_CFG9, 0x00);
+ pll_write(base + REG_DSI_28nm_PHY_PLL_CAL_CFG10, cal_cfg10 & 0xff);
+ pll_write(base + REG_DSI_28nm_PHY_PLL_CAL_CFG11, cal_cfg11 & 0xff);
+ pll_write(base + REG_DSI_28nm_PHY_PLL_EFUSE_CFG, 0x20);
+
+ return 0;
+}
+
+static int dsi_pll_28nm_clk_is_enabled(struct clk_hw *hw)
+{
+ struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
+ struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
+
+ return pll_28nm_poll_for_ready(pll_28nm, POLL_MAX_READS,
+ POLL_TIMEOUT_US);
+}
+
+static unsigned long dsi_pll_28nm_clk_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
+ struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
+ void __iomem *base = pll_28nm->mmio;
+ u32 sdm0, doubler, sdm_byp_div;
+ u32 sdm_dc_off, sdm_freq_seed, sdm2, sdm3;
+ u32 ref_clk = VCO_REF_CLK_RATE;
+ unsigned long vco_rate;
+
+ VERB("parent_rate=%lu", parent_rate);
+
+ /* Check to see if the ref clk doubler is enabled */
+ doubler = pll_read(base + REG_DSI_28nm_PHY_PLL_REFCLK_CFG) &
+ DSI_28nm_PHY_PLL_REFCLK_CFG_DBLR;
+ ref_clk += (doubler * VCO_REF_CLK_RATE);
+
+ /* see if it is integer mode or sdm mode */
+ sdm0 = pll_read(base + REG_DSI_28nm_PHY_PLL_SDM_CFG0);
+ if (sdm0 & DSI_28nm_PHY_PLL_SDM_CFG0_BYP) {
+ /* integer mode */
+ sdm_byp_div = FIELD(
+ pll_read(base + REG_DSI_28nm_PHY_PLL_SDM_CFG0),
+ DSI_28nm_PHY_PLL_SDM_CFG0_BYP_DIV) + 1;
+ vco_rate = ref_clk * sdm_byp_div;
+ } else {
+ /* sdm mode */
+ sdm_dc_off = FIELD(
+ pll_read(base + REG_DSI_28nm_PHY_PLL_SDM_CFG1),
+ DSI_28nm_PHY_PLL_SDM_CFG1_DC_OFFSET);
+ DBG("sdm_dc_off = %d", sdm_dc_off);
+ sdm2 = FIELD(pll_read(base + REG_DSI_28nm_PHY_PLL_SDM_CFG2),
+ DSI_28nm_PHY_PLL_SDM_CFG2_FREQ_SEED_7_0);
+ sdm3 = FIELD(pll_read(base + REG_DSI_28nm_PHY_PLL_SDM_CFG3),
+ DSI_28nm_PHY_PLL_SDM_CFG3_FREQ_SEED_15_8);
+ sdm_freq_seed = (sdm3 << 8) | sdm2;
+ DBG("sdm_freq_seed = %d", sdm_freq_seed);
+
+ vco_rate = (ref_clk * (sdm_dc_off + 1)) +
+ mult_frac(ref_clk, sdm_freq_seed, BIT(16));
+ DBG("vco rate = %lu", vco_rate);
+ }
+
+ DBG("returning vco rate = %lu", vco_rate);
+
+ return vco_rate;
+}
+
+static const struct clk_ops clk_ops_dsi_pll_28nm_vco = {
+ .round_rate = msm_dsi_pll_helper_clk_round_rate,
+ .set_rate = dsi_pll_28nm_clk_set_rate,
+ .recalc_rate = dsi_pll_28nm_clk_recalc_rate,
+ .prepare = msm_dsi_pll_helper_clk_prepare,
+ .unprepare = msm_dsi_pll_helper_clk_unprepare,
+ .is_enabled = dsi_pll_28nm_clk_is_enabled,
+};
+
+/*
+ * PLL Callbacks
+ */
+static int dsi_pll_28nm_enable_seq_hpm(struct msm_dsi_pll *pll)
+{
+ struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
+ struct device *dev = &pll_28nm->pdev->dev;
+ void __iomem *base = pll_28nm->mmio;
+ u32 max_reads = 5, timeout_us = 100;
+ bool locked;
+ u32 val;
+ int i;
+
+ DBG("id=%d", pll_28nm->id);
+
+ pll_28nm_software_reset(pll_28nm);
+
+ /*
+ * PLL power up sequence.
+ * Add necessary delays recommended by hardware.
+ */
+ val = DSI_28nm_PHY_PLL_GLB_CFG_PLL_PWRDN_B;
+ pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 1);
+
+ val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_PWRGEN_PWRDN_B;
+ pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 200);
+
+ val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_LDO_PWRDN_B;
+ pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 500);
+
+ val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_ENABLE;
+ pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 600);
+
+ for (i = 0; i < 2; i++) {
+ /* DSI Uniphy lock detect setting */
+ pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_LKDET_CFG2,
+ 0x0c, 100);
+ pll_write(base + REG_DSI_28nm_PHY_PLL_LKDET_CFG2, 0x0d);
+
+ /* poll for PLL ready status */
+ locked = pll_28nm_poll_for_ready(pll_28nm,
+ max_reads, timeout_us);
+ if (locked)
+ break;
+
+ pll_28nm_software_reset(pll_28nm);
+
+ /*
+ * PLL power up sequence.
+ * Add necessary delays recommended by hardware.
+ */
+ val = DSI_28nm_PHY_PLL_GLB_CFG_PLL_PWRDN_B;
+ pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 1);
+
+ val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_PWRGEN_PWRDN_B;
+ pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 200);
+
+ val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_LDO_PWRDN_B;
+ pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 250);
+
+ val &= ~DSI_28nm_PHY_PLL_GLB_CFG_PLL_LDO_PWRDN_B;
+ pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 200);
+
+ val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_LDO_PWRDN_B;
+ pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 500);
+
+ val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_ENABLE;
+ pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 600);
+ }
+
+ if (unlikely(!locked))
+ dev_err(dev, "DSI PLL lock failed\n");
+ else
+ DBG("DSI PLL Lock success");
+
+ return locked ? 0 : -EINVAL;
+}
+
+static int dsi_pll_28nm_enable_seq_lp(struct msm_dsi_pll *pll)
+{
+ struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
+ struct device *dev = &pll_28nm->pdev->dev;
+ void __iomem *base = pll_28nm->mmio;
+ bool locked;
+ u32 max_reads = 10, timeout_us = 50;
+ u32 val;
+
+ DBG("id=%d", pll_28nm->id);
+
+ pll_28nm_software_reset(pll_28nm);
+
+ /*
+ * PLL power up sequence.
+ * Add necessary delays recommended by hardware.
+ */
+ pll_write_ndelay(base + REG_DSI_28nm_PHY_PLL_CAL_CFG1, 0x34, 500);
+
+ val = DSI_28nm_PHY_PLL_GLB_CFG_PLL_PWRDN_B;
+ pll_write_ndelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 500);
+
+ val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_PWRGEN_PWRDN_B;
+ pll_write_ndelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 500);
+
+ val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_LDO_PWRDN_B |
+ DSI_28nm_PHY_PLL_GLB_CFG_PLL_ENABLE;
+ pll_write_ndelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 500);
+
+ /* DSI PLL toggle lock detect setting */
+ pll_write_ndelay(base + REG_DSI_28nm_PHY_PLL_LKDET_CFG2, 0x04, 500);
+ pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_LKDET_CFG2, 0x05, 512);
+
+ locked = pll_28nm_poll_for_ready(pll_28nm, max_reads, timeout_us);
+
+ if (unlikely(!locked))
+ dev_err(dev, "DSI PLL lock failed\n");
+ else
+ DBG("DSI PLL lock success");
+
+ return locked ? 0 : -EINVAL;
+}
+
+static void dsi_pll_28nm_disable_seq(struct msm_dsi_pll *pll)
+{
+ struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
+
+ DBG("id=%d", pll_28nm->id);
+ pll_write(pll_28nm->mmio + REG_DSI_28nm_PHY_PLL_GLB_CFG, 0x00);
+}
+
+static void dsi_pll_28nm_save_state(struct msm_dsi_pll *pll)
+{
+ struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
+ struct pll_28nm_cached_state *cached_state = &pll_28nm->cached_state;
+ void __iomem *base = pll_28nm->mmio;
+
+ cached_state->postdiv3 =
+ pll_read(base + REG_DSI_28nm_PHY_PLL_POSTDIV3_CFG);
+ cached_state->postdiv1 =
+ pll_read(base + REG_DSI_28nm_PHY_PLL_POSTDIV1_CFG);
+ cached_state->byte_mux = pll_read(base + REG_DSI_28nm_PHY_PLL_VREG_CFG);
+ cached_state->vco_rate = clk_hw_get_rate(&pll->clk_hw);
+}
+
+static int dsi_pll_28nm_restore_state(struct msm_dsi_pll *pll)
+{
+ struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
+ struct pll_28nm_cached_state *cached_state = &pll_28nm->cached_state;
+ void __iomem *base = pll_28nm->mmio;
+ int ret;
+
+ ret = dsi_pll_28nm_clk_set_rate(&pll->clk_hw,
+ cached_state->vco_rate, 0);
+ if (ret) {
+ dev_err(&pll_28nm->pdev->dev,
+ "restore vco rate failed. ret=%d\n", ret);
+ return ret;
+ }
+
+ pll_write(base + REG_DSI_28nm_PHY_PLL_POSTDIV3_CFG,
+ cached_state->postdiv3);
+ pll_write(base + REG_DSI_28nm_PHY_PLL_POSTDIV1_CFG,
+ cached_state->postdiv1);
+ pll_write(base + REG_DSI_28nm_PHY_PLL_VREG_CFG,
+ cached_state->byte_mux);
+
+ return 0;
+}
+
+static int dsi_pll_28nm_get_provider(struct msm_dsi_pll *pll,
+ struct clk **byte_clk_provider,
+ struct clk **pixel_clk_provider)
+{
+ struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
+
+ if (byte_clk_provider)
+ *byte_clk_provider = pll_28nm->provided_clks[DSI_BYTE_PLL_CLK];
+ if (pixel_clk_provider)
+ *pixel_clk_provider =
+ pll_28nm->provided_clks[DSI_PIXEL_PLL_CLK];
+
+ return 0;
+}
+
+static void dsi_pll_28nm_destroy(struct msm_dsi_pll *pll)
+{
+ struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
+ int i;
+
+ msm_dsi_pll_helper_unregister_clks(pll_28nm->pdev,
+ pll_28nm->clks, pll_28nm->num_clks);
+
+ for (i = 0; i < NUM_PROVIDED_CLKS; i++)
+ pll_28nm->provided_clks[i] = NULL;
+
+ pll_28nm->num_clks = 0;
+ pll_28nm->clk_data.clks = NULL;
+ pll_28nm->clk_data.clk_num = 0;
+}
+
+static int pll_28nm_register(struct dsi_pll_28nm *pll_28nm)
+{
+ char clk_name[32], parent1[32], parent2[32], vco_name[32];
+ struct clk_init_data vco_init = {
+ .parent_names = (const char *[]){ "xo" },
+ .num_parents = 1,
+ .name = vco_name,
+ .ops = &clk_ops_dsi_pll_28nm_vco,
+ };
+ struct device *dev = &pll_28nm->pdev->dev;
+ struct clk **clks = pll_28nm->clks;
+ struct clk **provided_clks = pll_28nm->provided_clks;
+ int num = 0;
+ int ret;
+
+ DBG("%d", pll_28nm->id);
+
+ snprintf(vco_name, 32, "dsi%dvco_clk", pll_28nm->id);
+ pll_28nm->base.clk_hw.init = &vco_init;
+ clks[num++] = clk_register(dev, &pll_28nm->base.clk_hw);
+
+ snprintf(clk_name, 32, "dsi%danalog_postdiv_clk", pll_28nm->id);
+ snprintf(parent1, 32, "dsi%dvco_clk", pll_28nm->id);
+ clks[num++] = clk_register_divider(dev, clk_name,
+ parent1, CLK_SET_RATE_PARENT,
+ pll_28nm->mmio +
+ REG_DSI_28nm_PHY_PLL_POSTDIV1_CFG,
+ 0, 4, 0, NULL);
+
+ snprintf(clk_name, 32, "dsi%dindirect_path_div2_clk", pll_28nm->id);
+ snprintf(parent1, 32, "dsi%danalog_postdiv_clk", pll_28nm->id);
+ clks[num++] = clk_register_fixed_factor(dev, clk_name,
+ parent1, CLK_SET_RATE_PARENT,
+ 1, 2);
+
+ snprintf(clk_name, 32, "dsi%dpll", pll_28nm->id);
+ snprintf(parent1, 32, "dsi%dvco_clk", pll_28nm->id);
+ clks[num++] = provided_clks[DSI_PIXEL_PLL_CLK] =
+ clk_register_divider(dev, clk_name,
+ parent1, 0, pll_28nm->mmio +
+ REG_DSI_28nm_PHY_PLL_POSTDIV3_CFG,
+ 0, 8, 0, NULL);
+
+ snprintf(clk_name, 32, "dsi%dbyte_mux", pll_28nm->id);
+ snprintf(parent1, 32, "dsi%dvco_clk", pll_28nm->id);
+ snprintf(parent2, 32, "dsi%dindirect_path_div2_clk", pll_28nm->id);
+ clks[num++] = clk_register_mux(dev, clk_name,
+ (const char *[]){
+ parent1, parent2
+ }, 2, CLK_SET_RATE_PARENT, pll_28nm->mmio +
+ REG_DSI_28nm_PHY_PLL_VREG_CFG, 1, 1, 0, NULL);
+
+ snprintf(clk_name, 32, "dsi%dpllbyte", pll_28nm->id);
+ snprintf(parent1, 32, "dsi%dbyte_mux", pll_28nm->id);
+ clks[num++] = provided_clks[DSI_BYTE_PLL_CLK] =
+ clk_register_fixed_factor(dev, clk_name,
+ parent1, CLK_SET_RATE_PARENT, 1, 4);
+
+ pll_28nm->num_clks = num;
+
+ pll_28nm->clk_data.clk_num = NUM_PROVIDED_CLKS;
+ pll_28nm->clk_data.clks = provided_clks;
+
+ ret = of_clk_add_provider(dev->of_node,
+ of_clk_src_onecell_get, &pll_28nm->clk_data);
+ if (ret) {
+ dev_err(dev, "failed to register clk provider: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+struct msm_dsi_pll *msm_dsi_pll_28nm_init(struct platform_device *pdev,
+ enum msm_dsi_phy_type type, int id)
+{
+ struct dsi_pll_28nm *pll_28nm;
+ struct msm_dsi_pll *pll;
+ int ret;
+
+ if (!pdev)
+ return ERR_PTR(-ENODEV);
+
+ pll_28nm = devm_kzalloc(&pdev->dev, sizeof(*pll_28nm), GFP_KERNEL);
+ if (!pll_28nm)
+ return ERR_PTR(-ENOMEM);
+
+ pll_28nm->pdev = pdev;
+ pll_28nm->id = id;
+
+ pll_28nm->mmio = msm_ioremap(pdev, "dsi_pll", "DSI_PLL");
+ if (IS_ERR_OR_NULL(pll_28nm->mmio)) {
+ dev_err(&pdev->dev, "%s: failed to map pll base\n", __func__);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ pll = &pll_28nm->base;
+ pll->min_rate = VCO_MIN_RATE;
+ pll->max_rate = VCO_MAX_RATE;
+ pll->get_provider = dsi_pll_28nm_get_provider;
+ pll->destroy = dsi_pll_28nm_destroy;
+ pll->disable_seq = dsi_pll_28nm_disable_seq;
+ pll->save_state = dsi_pll_28nm_save_state;
+ pll->restore_state = dsi_pll_28nm_restore_state;
+
+ if (type == MSM_DSI_PHY_28NM_HPM) {
+ pll_28nm->vco_delay = 1;
+
+ pll->en_seq_cnt = 3;
+ pll->enable_seqs[0] = dsi_pll_28nm_enable_seq_hpm;
+ pll->enable_seqs[1] = dsi_pll_28nm_enable_seq_hpm;
+ pll->enable_seqs[2] = dsi_pll_28nm_enable_seq_hpm;
+ } else if (type == MSM_DSI_PHY_28NM_LP) {
+ pll_28nm->vco_delay = 1000;
+
+ pll->en_seq_cnt = 1;
+ pll->enable_seqs[0] = dsi_pll_28nm_enable_seq_lp;
+ } else {
+ dev_err(&pdev->dev, "phy type (%d) is not 28nm\n", type);
+ return ERR_PTR(-EINVAL);
+ }
+
+ ret = pll_28nm_register(pll_28nm);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register PLL: %d\n", ret);
+ return ERR_PTR(ret);
+ }
+
+ return pll;
+}
+
Code Review / kvmfornfv.git / blobdiff