--- /dev/null
+/*
+ * Copyright © 2014 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ */
+
+#include "i915_drv.h"
+
+struct i915_params i915 __read_mostly = {
+ .modeset = -1,
+ .panel_ignore_lid = 1,
+ .semaphores = -1,
+ .lvds_downclock = 0,
+ .lvds_channel_mode = 0,
+ .panel_use_ssc = -1,
+ .vbt_sdvo_panel_type = -1,
+ .enable_rc6 = -1,
+ .enable_fbc = -1,
+ .enable_execlists = -1,
+ .enable_hangcheck = true,
+ .enable_ppgtt = -1,
+ .enable_psr = 0,
+ .preliminary_hw_support = IS_ENABLED(CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT),
+ .disable_power_well = 1,
+ .enable_ips = 1,
+ .fastboot = 0,
+ .prefault_disable = 0,
+ .load_detect_test = 0,
+ .reset = true,
+ .invert_brightness = 0,
+ .disable_display = 0,
+ .enable_cmd_parser = 1,
+ .disable_vtd_wa = 0,
+ .use_mmio_flip = 0,
+ .mmio_debug = 0,
+ .verbose_state_checks = 1,
+ .nuclear_pageflip = 0,
+};
+
+module_param_named(modeset, i915.modeset, int, 0400);
+MODULE_PARM_DESC(modeset,
+ "Use kernel modesetting [KMS] (0=DRM_I915_KMS from .config, "
+ "1=on, -1=force vga console preference [default])");
+
+module_param_named(panel_ignore_lid, i915.panel_ignore_lid, int, 0600);
+MODULE_PARM_DESC(panel_ignore_lid,
+ "Override lid status (0=autodetect, 1=autodetect disabled [default], "
+ "-1=force lid closed, -2=force lid open)");
+
+module_param_named_unsafe(semaphores, i915.semaphores, int, 0400);
+MODULE_PARM_DESC(semaphores,
+ "Use semaphores for inter-ring sync "
+ "(default: -1 (use per-chip defaults))");
+
+module_param_named_unsafe(enable_rc6, i915.enable_rc6, int, 0400);
+MODULE_PARM_DESC(enable_rc6,
+ "Enable power-saving render C-state 6. "
+ "Different stages can be selected via bitmask values "
+ "(0 = disable; 1 = enable rc6; 2 = enable deep rc6; 4 = enable deepest rc6). "
+ "For example, 3 would enable rc6 and deep rc6, and 7 would enable everything. "
+ "default: -1 (use per-chip default)");
+
+module_param_named_unsafe(enable_fbc, i915.enable_fbc, int, 0600);
+MODULE_PARM_DESC(enable_fbc,
+ "Enable frame buffer compression for power savings "
+ "(default: -1 (use per-chip default))");
+
+module_param_named(lvds_downclock, i915.lvds_downclock, int, 0400);
+MODULE_PARM_DESC(lvds_downclock,
+ "Use panel (LVDS/eDP) downclocking for power savings "
+ "(default: false)");
+
+module_param_named(lvds_channel_mode, i915.lvds_channel_mode, int, 0600);
+MODULE_PARM_DESC(lvds_channel_mode,
+ "Specify LVDS channel mode "
+ "(0=probe BIOS [default], 1=single-channel, 2=dual-channel)");
+
+module_param_named(lvds_use_ssc, i915.panel_use_ssc, int, 0600);
+MODULE_PARM_DESC(lvds_use_ssc,
+ "Use Spread Spectrum Clock with panels [LVDS/eDP] "
+ "(default: auto from VBT)");
+
+module_param_named(vbt_sdvo_panel_type, i915.vbt_sdvo_panel_type, int, 0600);
+MODULE_PARM_DESC(vbt_sdvo_panel_type,
+ "Override/Ignore selection of SDVO panel mode in the VBT "
+ "(-2=ignore, -1=auto [default], index in VBT BIOS table)");
+
+module_param_named(reset, i915.reset, bool, 0600);
+MODULE_PARM_DESC(reset, "Attempt GPU resets (default: true)");
+
+module_param_named(enable_hangcheck, i915.enable_hangcheck, bool, 0644);
+MODULE_PARM_DESC(enable_hangcheck,
+ "Periodically check GPU activity for detecting hangs. "
+ "WARNING: Disabling this can cause system wide hangs. "
+ "(default: true)");
+
+module_param_named_unsafe(enable_ppgtt, i915.enable_ppgtt, int, 0400);
+MODULE_PARM_DESC(enable_ppgtt,
+ "Override PPGTT usage. "
+ "(-1=auto [default], 0=disabled, 1=aliasing, 2=full)");
+
+module_param_named(enable_execlists, i915.enable_execlists, int, 0400);
+MODULE_PARM_DESC(enable_execlists,
+ "Override execlists usage. "
+ "(-1=auto [default], 0=disabled, 1=enabled)");
+
+module_param_named(enable_psr, i915.enable_psr, int, 0600);
+MODULE_PARM_DESC(enable_psr, "Enable PSR (default: false)");
+
+module_param_named(preliminary_hw_support, i915.preliminary_hw_support, int, 0600);
+MODULE_PARM_DESC(preliminary_hw_support,
+ "Enable preliminary hardware support.");
+
+module_param_named(disable_power_well, i915.disable_power_well, int, 0600);
+MODULE_PARM_DESC(disable_power_well,
+ "Disable the power well when possible (default: true)");
+
+module_param_named(enable_ips, i915.enable_ips, int, 0600);
+MODULE_PARM_DESC(enable_ips, "Enable IPS (default: true)");
+
+module_param_named(fastboot, i915.fastboot, bool, 0600);
+MODULE_PARM_DESC(fastboot,
+ "Try to skip unnecessary mode sets at boot time (default: false)");
+
+module_param_named_unsafe(prefault_disable, i915.prefault_disable, bool, 0600);
+MODULE_PARM_DESC(prefault_disable,
+ "Disable page prefaulting for pread/pwrite/reloc (default:false). "
+ "For developers only.");
+
+module_param_named_unsafe(load_detect_test, i915.load_detect_test, bool, 0600);
+MODULE_PARM_DESC(load_detect_test,
+ "Force-enable the VGA load detect code for testing (default:false). "
+ "For developers only.");
+
+module_param_named(invert_brightness, i915.invert_brightness, int, 0600);
+MODULE_PARM_DESC(invert_brightness,
+ "Invert backlight brightness "
+ "(-1 force normal, 0 machine defaults, 1 force inversion), please "
+ "report PCI device ID, subsystem vendor and subsystem device ID "
+ "to dri-devel@lists.freedesktop.org, if your machine needs it. "
+ "It will then be included in an upcoming module version.");
+
+module_param_named(disable_display, i915.disable_display, bool, 0600);
+MODULE_PARM_DESC(disable_display, "Disable display (default: false)");
+
+module_param_named(disable_vtd_wa, i915.disable_vtd_wa, bool, 0600);
+MODULE_PARM_DESC(disable_vtd_wa, "Disable all VT-d workarounds (default: false)");
+
+module_param_named(enable_cmd_parser, i915.enable_cmd_parser, int, 0600);
+MODULE_PARM_DESC(enable_cmd_parser,
+ "Enable command parsing (1=enabled [default], 0=disabled)");
+
+module_param_named(use_mmio_flip, i915.use_mmio_flip, int, 0600);
+MODULE_PARM_DESC(use_mmio_flip,
+ "use MMIO flips (-1=never, 0=driver discretion [default], 1=always)");
+
+module_param_named(mmio_debug, i915.mmio_debug, int, 0600);
+MODULE_PARM_DESC(mmio_debug,
+ "Enable the MMIO debug code for the first N failures (default: off). "
+ "This may negatively affect performance.");
+
+module_param_named(verbose_state_checks, i915.verbose_state_checks, bool, 0600);
+MODULE_PARM_DESC(verbose_state_checks,
+ "Enable verbose logs (ie. WARN_ON()) in case of unexpected hw state conditions.");
+
+module_param_named_unsafe(nuclear_pageflip, i915.nuclear_pageflip, bool, 0600);
+MODULE_PARM_DESC(nuclear_pageflip,
+ "Force atomic modeset functionality; only planes work for now (default: false).");
Code Review / kvmfornfv.git / blobdiff