--- /dev/null
+/*
+ * Copyright © 2009 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/i2c.h>
+#include <linux/pm_runtime.h>
+
+#include <drm/drmP.h>
+#include "framebuffer.h"
+#include "psb_drv.h"
+#include "psb_intel_drv.h"
+#include "psb_intel_reg.h"
+#include "gma_display.h"
+#include "power.h"
+
+#define MRST_LIMIT_LVDS_100L 0
+#define MRST_LIMIT_LVDS_83 1
+#define MRST_LIMIT_LVDS_100 2
+#define MRST_LIMIT_SDVO 3
+
+#define MRST_DOT_MIN 19750
+#define MRST_DOT_MAX 120000
+#define MRST_M_MIN_100L 20
+#define MRST_M_MIN_100 10
+#define MRST_M_MIN_83 12
+#define MRST_M_MAX_100L 34
+#define MRST_M_MAX_100 17
+#define MRST_M_MAX_83 20
+#define MRST_P1_MIN 2
+#define MRST_P1_MAX_0 7
+#define MRST_P1_MAX_1 8
+
+static bool mrst_lvds_find_best_pll(const struct gma_limit_t *limit,
+ struct drm_crtc *crtc, int target,
+ int refclk, struct gma_clock_t *best_clock);
+
+static bool mrst_sdvo_find_best_pll(const struct gma_limit_t *limit,
+ struct drm_crtc *crtc, int target,
+ int refclk, struct gma_clock_t *best_clock);
+
+static const struct gma_limit_t mrst_limits[] = {
+ { /* MRST_LIMIT_LVDS_100L */
+ .dot = {.min = MRST_DOT_MIN, .max = MRST_DOT_MAX},
+ .m = {.min = MRST_M_MIN_100L, .max = MRST_M_MAX_100L},
+ .p1 = {.min = MRST_P1_MIN, .max = MRST_P1_MAX_1},
+ .find_pll = mrst_lvds_find_best_pll,
+ },
+ { /* MRST_LIMIT_LVDS_83L */
+ .dot = {.min = MRST_DOT_MIN, .max = MRST_DOT_MAX},
+ .m = {.min = MRST_M_MIN_83, .max = MRST_M_MAX_83},
+ .p1 = {.min = MRST_P1_MIN, .max = MRST_P1_MAX_0},
+ .find_pll = mrst_lvds_find_best_pll,
+ },
+ { /* MRST_LIMIT_LVDS_100 */
+ .dot = {.min = MRST_DOT_MIN, .max = MRST_DOT_MAX},
+ .m = {.min = MRST_M_MIN_100, .max = MRST_M_MAX_100},
+ .p1 = {.min = MRST_P1_MIN, .max = MRST_P1_MAX_1},
+ .find_pll = mrst_lvds_find_best_pll,
+ },
+ { /* MRST_LIMIT_SDVO */
+ .vco = {.min = 1400000, .max = 2800000},
+ .n = {.min = 3, .max = 7},
+ .m = {.min = 80, .max = 137},
+ .p1 = {.min = 1, .max = 2},
+ .p2 = {.dot_limit = 200000, .p2_slow = 10, .p2_fast = 10},
+ .find_pll = mrst_sdvo_find_best_pll,
+ },
+};
+
+#define MRST_M_MIN 10
+static const u32 oaktrail_m_converts[] = {
+ 0x2B, 0x15, 0x2A, 0x35, 0x1A, 0x0D, 0x26, 0x33, 0x19, 0x2C,
+ 0x36, 0x3B, 0x1D, 0x2E, 0x37, 0x1B, 0x2D, 0x16, 0x0B, 0x25,
+ 0x12, 0x09, 0x24, 0x32, 0x39, 0x1c,
+};
+
+static const struct gma_limit_t *mrst_limit(struct drm_crtc *crtc,
+ int refclk)
+{
+ const struct gma_limit_t *limit = NULL;
+ struct drm_device *dev = crtc->dev;
+ struct drm_psb_private *dev_priv = dev->dev_private;
+
+ if (gma_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)
+ || gma_pipe_has_type(crtc, INTEL_OUTPUT_MIPI)) {
+ switch (dev_priv->core_freq) {
+ case 100:
+ limit = &mrst_limits[MRST_LIMIT_LVDS_100L];
+ break;
+ case 166:
+ limit = &mrst_limits[MRST_LIMIT_LVDS_83];
+ break;
+ case 200:
+ limit = &mrst_limits[MRST_LIMIT_LVDS_100];
+ break;
+ }
+ } else if (gma_pipe_has_type(crtc, INTEL_OUTPUT_SDVO)) {
+ limit = &mrst_limits[MRST_LIMIT_SDVO];
+ } else {
+ limit = NULL;
+ dev_err(dev->dev, "mrst_limit Wrong display type.\n");
+ }
+
+ return limit;
+}
+
+/** Derive the pixel clock for the given refclk and divisors for 8xx chips. */
+static void mrst_lvds_clock(int refclk, struct gma_clock_t *clock)
+{
+ clock->dot = (refclk * clock->m) / (14 * clock->p1);
+}
+
+static void mrst_print_pll(struct gma_clock_t *clock)
+{
+ DRM_DEBUG_DRIVER("dotclock=%d, m=%d, m1=%d, m2=%d, n=%d, p1=%d, p2=%d\n",
+ clock->dot, clock->m, clock->m1, clock->m2, clock->n,
+ clock->p1, clock->p2);
+}
+
+static bool mrst_sdvo_find_best_pll(const struct gma_limit_t *limit,
+ struct drm_crtc *crtc, int target,
+ int refclk, struct gma_clock_t *best_clock)
+{
+ struct gma_clock_t clock;
+ u32 target_vco, actual_freq;
+ s32 freq_error, min_error = 100000;
+
+ memset(best_clock, 0, sizeof(*best_clock));
+
+ for (clock.m = limit->m.min; clock.m <= limit->m.max; clock.m++) {
+ for (clock.n = limit->n.min; clock.n <= limit->n.max;
+ clock.n++) {
+ for (clock.p1 = limit->p1.min;
+ clock.p1 <= limit->p1.max; clock.p1++) {
+ /* p2 value always stored in p2_slow on SDVO */
+ clock.p = clock.p1 * limit->p2.p2_slow;
+ target_vco = target * clock.p;
+
+ /* VCO will increase at this point so break */
+ if (target_vco > limit->vco.max)
+ break;
+
+ if (target_vco < limit->vco.min)
+ continue;
+
+ actual_freq = (refclk * clock.m) /
+ (clock.n * clock.p);
+ freq_error = 10000 -
+ ((target * 10000) / actual_freq);
+
+ if (freq_error < -min_error) {
+ /* freq_error will start to decrease at
+ this point so break */
+ break;
+ }
+
+ if (freq_error < 0)
+ freq_error = -freq_error;
+
+ if (freq_error < min_error) {
+ min_error = freq_error;
+ *best_clock = clock;
+ }
+ }
+ }
+ if (min_error == 0)
+ break;
+ }
+
+ return min_error == 0;
+}
+
+/**
+ * Returns a set of divisors for the desired target clock with the given refclk,
+ * or FALSE. Divisor values are the actual divisors for
+ */
+static bool mrst_lvds_find_best_pll(const struct gma_limit_t *limit,
+ struct drm_crtc *crtc, int target,
+ int refclk, struct gma_clock_t *best_clock)
+{
+ struct gma_clock_t clock;
+ int err = target;
+
+ memset(best_clock, 0, sizeof(*best_clock));
+
+ for (clock.m = limit->m.min; clock.m <= limit->m.max; clock.m++) {
+ for (clock.p1 = limit->p1.min; clock.p1 <= limit->p1.max;
+ clock.p1++) {
+ int this_err;
+
+ mrst_lvds_clock(refclk, &clock);
+
+ this_err = abs(clock.dot - target);
+ if (this_err < err) {
+ *best_clock = clock;
+ err = this_err;
+ }
+ }
+ }
+ return err != target;
+}
+
+/**
+ * Sets the power management mode of the pipe and plane.
+ *
+ * This code should probably grow support for turning the cursor off and back
+ * on appropriately at the same time as we're turning the pipe off/on.
+ */
+static void oaktrail_crtc_dpms(struct drm_crtc *crtc, int mode)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_psb_private *dev_priv = dev->dev_private;
+ struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
+ int pipe = gma_crtc->pipe;
+ const struct psb_offset *map = &dev_priv->regmap[pipe];
+ u32 temp;
+ int i;
+ int need_aux = gma_pipe_has_type(crtc, INTEL_OUTPUT_SDVO) ? 1 : 0;
+
+ if (gma_pipe_has_type(crtc, INTEL_OUTPUT_HDMI)) {
+ oaktrail_crtc_hdmi_dpms(crtc, mode);
+ return;
+ }
+
+ if (!gma_power_begin(dev, true))
+ return;
+
+ /* XXX: When our outputs are all unaware of DPMS modes other than off
+ * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
+ */
+ switch (mode) {
+ case DRM_MODE_DPMS_ON:
+ case DRM_MODE_DPMS_STANDBY:
+ case DRM_MODE_DPMS_SUSPEND:
+ for (i = 0; i <= need_aux; i++) {
+ /* Enable the DPLL */
+ temp = REG_READ_WITH_AUX(map->dpll, i);
+ if ((temp & DPLL_VCO_ENABLE) == 0) {
+ REG_WRITE_WITH_AUX(map->dpll, temp, i);
+ REG_READ_WITH_AUX(map->dpll, i);
+ /* Wait for the clocks to stabilize. */
+ udelay(150);
+ REG_WRITE_WITH_AUX(map->dpll,
+ temp | DPLL_VCO_ENABLE, i);
+ REG_READ_WITH_AUX(map->dpll, i);
+ /* Wait for the clocks to stabilize. */
+ udelay(150);
+ REG_WRITE_WITH_AUX(map->dpll,
+ temp | DPLL_VCO_ENABLE, i);
+ REG_READ_WITH_AUX(map->dpll, i);
+ /* Wait for the clocks to stabilize. */
+ udelay(150);
+ }
+
+ /* Enable the pipe */
+ temp = REG_READ_WITH_AUX(map->conf, i);
+ if ((temp & PIPEACONF_ENABLE) == 0) {
+ REG_WRITE_WITH_AUX(map->conf,
+ temp | PIPEACONF_ENABLE, i);
+ }
+
+ /* Enable the plane */
+ temp = REG_READ_WITH_AUX(map->cntr, i);
+ if ((temp & DISPLAY_PLANE_ENABLE) == 0) {
+ REG_WRITE_WITH_AUX(map->cntr,
+ temp | DISPLAY_PLANE_ENABLE,
+ i);
+ /* Flush the plane changes */
+ REG_WRITE_WITH_AUX(map->base,
+ REG_READ_WITH_AUX(map->base, i), i);
+ }
+
+ }
+ gma_crtc_load_lut(crtc);
+
+ /* Give the overlay scaler a chance to enable
+ if it's on this pipe */
+ /* psb_intel_crtc_dpms_video(crtc, true); TODO */
+ break;
+ case DRM_MODE_DPMS_OFF:
+ /* Give the overlay scaler a chance to disable
+ * if it's on this pipe */
+ /* psb_intel_crtc_dpms_video(crtc, FALSE); TODO */
+
+ for (i = 0; i <= need_aux; i++) {
+ /* Disable the VGA plane that we never use */
+ REG_WRITE_WITH_AUX(VGACNTRL, VGA_DISP_DISABLE, i);
+ /* Disable display plane */
+ temp = REG_READ_WITH_AUX(map->cntr, i);
+ if ((temp & DISPLAY_PLANE_ENABLE) != 0) {
+ REG_WRITE_WITH_AUX(map->cntr,
+ temp & ~DISPLAY_PLANE_ENABLE, i);
+ /* Flush the plane changes */
+ REG_WRITE_WITH_AUX(map->base,
+ REG_READ(map->base), i);
+ REG_READ_WITH_AUX(map->base, i);
+ }
+
+ /* Next, disable display pipes */
+ temp = REG_READ_WITH_AUX(map->conf, i);
+ if ((temp & PIPEACONF_ENABLE) != 0) {
+ REG_WRITE_WITH_AUX(map->conf,
+ temp & ~PIPEACONF_ENABLE, i);
+ REG_READ_WITH_AUX(map->conf, i);
+ }
+ /* Wait for for the pipe disable to take effect. */
+ gma_wait_for_vblank(dev);
+
+ temp = REG_READ_WITH_AUX(map->dpll, i);
+ if ((temp & DPLL_VCO_ENABLE) != 0) {
+ REG_WRITE_WITH_AUX(map->dpll,
+ temp & ~DPLL_VCO_ENABLE, i);
+ REG_READ_WITH_AUX(map->dpll, i);
+ }
+
+ /* Wait for the clocks to turn off. */
+ udelay(150);
+ }
+ break;
+ }
+
+ /* Set FIFO Watermarks (values taken from EMGD) */
+ REG_WRITE(DSPARB, 0x3f80);
+ REG_WRITE(DSPFW1, 0x3f8f0404);
+ REG_WRITE(DSPFW2, 0x04040f04);
+ REG_WRITE(DSPFW3, 0x0);
+ REG_WRITE(DSPFW4, 0x04040404);
+ REG_WRITE(DSPFW5, 0x04040404);
+ REG_WRITE(DSPFW6, 0x78);
+ REG_WRITE(DSPCHICKENBIT, REG_READ(DSPCHICKENBIT) | 0xc040);
+
+ gma_power_end(dev);
+}
+
+/**
+ * Return the pipe currently connected to the panel fitter,
+ * or -1 if the panel fitter is not present or not in use
+ */
+static int oaktrail_panel_fitter_pipe(struct drm_device *dev)
+{
+ u32 pfit_control;
+
+ pfit_control = REG_READ(PFIT_CONTROL);
+
+ /* See if the panel fitter is in use */
+ if ((pfit_control & PFIT_ENABLE) == 0)
+ return -1;
+ return (pfit_control >> 29) & 3;
+}
+
+static int oaktrail_crtc_mode_set(struct drm_crtc *crtc,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode,
+ int x, int y,
+ struct drm_framebuffer *old_fb)
+{
+ struct drm_device *dev = crtc->dev;
+ struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
+ struct drm_psb_private *dev_priv = dev->dev_private;
+ int pipe = gma_crtc->pipe;
+ const struct psb_offset *map = &dev_priv->regmap[pipe];
+ int refclk = 0;
+ struct gma_clock_t clock;
+ const struct gma_limit_t *limit;
+ u32 dpll = 0, fp = 0, dspcntr, pipeconf;
+ bool ok, is_sdvo = false;
+ bool is_lvds = false;
+ bool is_mipi = false;
+ struct drm_mode_config *mode_config = &dev->mode_config;
+ struct gma_encoder *gma_encoder = NULL;
+ uint64_t scalingType = DRM_MODE_SCALE_FULLSCREEN;
+ struct drm_connector *connector;
+ int i;
+ int need_aux = gma_pipe_has_type(crtc, INTEL_OUTPUT_SDVO) ? 1 : 0;
+
+ if (gma_pipe_has_type(crtc, INTEL_OUTPUT_HDMI))
+ return oaktrail_crtc_hdmi_mode_set(crtc, mode, adjusted_mode, x, y, old_fb);
+
+ if (!gma_power_begin(dev, true))
+ return 0;
+
+ memcpy(&gma_crtc->saved_mode,
+ mode,
+ sizeof(struct drm_display_mode));
+ memcpy(&gma_crtc->saved_adjusted_mode,
+ adjusted_mode,
+ sizeof(struct drm_display_mode));
+
+ list_for_each_entry(connector, &mode_config->connector_list, head) {
+ if (!connector->encoder || connector->encoder->crtc != crtc)
+ continue;
+
+ gma_encoder = gma_attached_encoder(connector);
+
+ switch (gma_encoder->type) {
+ case INTEL_OUTPUT_LVDS:
+ is_lvds = true;
+ break;
+ case INTEL_OUTPUT_SDVO:
+ is_sdvo = true;
+ break;
+ case INTEL_OUTPUT_MIPI:
+ is_mipi = true;
+ break;
+ }
+ }
+
+ /* Disable the VGA plane that we never use */
+ for (i = 0; i <= need_aux; i++)
+ REG_WRITE_WITH_AUX(VGACNTRL, VGA_DISP_DISABLE, i);
+
+ /* Disable the panel fitter if it was on our pipe */
+ if (oaktrail_panel_fitter_pipe(dev) == pipe)
+ REG_WRITE(PFIT_CONTROL, 0);
+
+ for (i = 0; i <= need_aux; i++) {
+ REG_WRITE_WITH_AUX(map->src, ((mode->crtc_hdisplay - 1) << 16) |
+ (mode->crtc_vdisplay - 1), i);
+ }
+
+ if (gma_encoder)
+ drm_object_property_get_value(&connector->base,
+ dev->mode_config.scaling_mode_property, &scalingType);
+
+ if (scalingType == DRM_MODE_SCALE_NO_SCALE) {
+ /* Moorestown doesn't have register support for centering so
+ * we need to mess with the h/vblank and h/vsync start and
+ * ends to get centering */
+ int offsetX = 0, offsetY = 0;
+
+ offsetX = (adjusted_mode->crtc_hdisplay -
+ mode->crtc_hdisplay) / 2;
+ offsetY = (adjusted_mode->crtc_vdisplay -
+ mode->crtc_vdisplay) / 2;
+
+ for (i = 0; i <= need_aux; i++) {
+ REG_WRITE_WITH_AUX(map->htotal, (mode->crtc_hdisplay - 1) |
+ ((adjusted_mode->crtc_htotal - 1) << 16), i);
+ REG_WRITE_WITH_AUX(map->vtotal, (mode->crtc_vdisplay - 1) |
+ ((adjusted_mode->crtc_vtotal - 1) << 16), i);
+ REG_WRITE_WITH_AUX(map->hblank,
+ (adjusted_mode->crtc_hblank_start - offsetX - 1) |
+ ((adjusted_mode->crtc_hblank_end - offsetX - 1) << 16), i);
+ REG_WRITE_WITH_AUX(map->hsync,
+ (adjusted_mode->crtc_hsync_start - offsetX - 1) |
+ ((adjusted_mode->crtc_hsync_end - offsetX - 1) << 16), i);
+ REG_WRITE_WITH_AUX(map->vblank,
+ (adjusted_mode->crtc_vblank_start - offsetY - 1) |
+ ((adjusted_mode->crtc_vblank_end - offsetY - 1) << 16), i);
+ REG_WRITE_WITH_AUX(map->vsync,
+ (adjusted_mode->crtc_vsync_start - offsetY - 1) |
+ ((adjusted_mode->crtc_vsync_end - offsetY - 1) << 16), i);
+ }
+ } else {
+ for (i = 0; i <= need_aux; i++) {
+ REG_WRITE_WITH_AUX(map->htotal, (adjusted_mode->crtc_hdisplay - 1) |
+ ((adjusted_mode->crtc_htotal - 1) << 16), i);
+ REG_WRITE_WITH_AUX(map->vtotal, (adjusted_mode->crtc_vdisplay - 1) |
+ ((adjusted_mode->crtc_vtotal - 1) << 16), i);
+ REG_WRITE_WITH_AUX(map->hblank, (adjusted_mode->crtc_hblank_start - 1) |
+ ((adjusted_mode->crtc_hblank_end - 1) << 16), i);
+ REG_WRITE_WITH_AUX(map->hsync, (adjusted_mode->crtc_hsync_start - 1) |
+ ((adjusted_mode->crtc_hsync_end - 1) << 16), i);
+ REG_WRITE_WITH_AUX(map->vblank, (adjusted_mode->crtc_vblank_start - 1) |
+ ((adjusted_mode->crtc_vblank_end - 1) << 16), i);
+ REG_WRITE_WITH_AUX(map->vsync, (adjusted_mode->crtc_vsync_start - 1) |
+ ((adjusted_mode->crtc_vsync_end - 1) << 16), i);
+ }
+ }
+
+ /* Flush the plane changes */
+ {
+ const struct drm_crtc_helper_funcs *crtc_funcs =
+ crtc->helper_private;
+ crtc_funcs->mode_set_base(crtc, x, y, old_fb);
+ }
+
+ /* setup pipeconf */
+ pipeconf = REG_READ(map->conf);
+
+ /* Set up the display plane register */
+ dspcntr = REG_READ(map->cntr);
+ dspcntr |= DISPPLANE_GAMMA_ENABLE;
+
+ if (pipe == 0)
+ dspcntr |= DISPPLANE_SEL_PIPE_A;
+ else
+ dspcntr |= DISPPLANE_SEL_PIPE_B;
+
+ if (is_mipi)
+ goto oaktrail_crtc_mode_set_exit;
+
+
+ dpll = 0; /*BIT16 = 0 for 100MHz reference */
+
+ refclk = is_sdvo ? 96000 : dev_priv->core_freq * 1000;
+ limit = mrst_limit(crtc, refclk);
+ ok = limit->find_pll(limit, crtc, adjusted_mode->clock,
+ refclk, &clock);
+
+ if (is_sdvo) {
+ /* Convert calculated values to register values */
+ clock.p1 = (1L << (clock.p1 - 1));
+ clock.m -= 2;
+ clock.n = (1L << (clock.n - 1));
+ }
+
+ if (!ok)
+ DRM_ERROR("Failed to find proper PLL settings");
+
+ mrst_print_pll(&clock);
+
+ if (is_sdvo)
+ fp = clock.n << 16 | clock.m;
+ else
+ fp = oaktrail_m_converts[(clock.m - MRST_M_MIN)] << 8;
+
+ dpll |= DPLL_VGA_MODE_DIS;
+
+
+ dpll |= DPLL_VCO_ENABLE;
+
+ if (is_lvds)
+ dpll |= DPLLA_MODE_LVDS;
+ else
+ dpll |= DPLLB_MODE_DAC_SERIAL;
+
+ if (is_sdvo) {
+ int sdvo_pixel_multiply =
+ adjusted_mode->clock / mode->clock;
+
+ dpll |= DPLL_DVO_HIGH_SPEED;
+ dpll |=
+ (sdvo_pixel_multiply -
+ 1) << SDVO_MULTIPLIER_SHIFT_HIRES;
+ }
+
+
+ /* compute bitmask from p1 value */
+ if (is_sdvo)
+ dpll |= clock.p1 << 16; // dpll |= (1 << (clock.p1 - 1)) << 16;
+ else
+ dpll |= (1 << (clock.p1 - 2)) << 17;
+
+ dpll |= DPLL_VCO_ENABLE;
+
+ if (dpll & DPLL_VCO_ENABLE) {
+ for (i = 0; i <= need_aux; i++) {
+ REG_WRITE_WITH_AUX(map->fp0, fp, i);
+ REG_WRITE_WITH_AUX(map->dpll, dpll & ~DPLL_VCO_ENABLE, i);
+ REG_READ_WITH_AUX(map->dpll, i);
+ /* Check the DPLLA lock bit PIPEACONF[29] */
+ udelay(150);
+ }
+ }
+
+ for (i = 0; i <= need_aux; i++) {
+ REG_WRITE_WITH_AUX(map->fp0, fp, i);
+ REG_WRITE_WITH_AUX(map->dpll, dpll, i);
+ REG_READ_WITH_AUX(map->dpll, i);
+ /* Wait for the clocks to stabilize. */
+ udelay(150);
+
+ /* write it again -- the BIOS does, after all */
+ REG_WRITE_WITH_AUX(map->dpll, dpll, i);
+ REG_READ_WITH_AUX(map->dpll, i);
+ /* Wait for the clocks to stabilize. */
+ udelay(150);
+
+ REG_WRITE_WITH_AUX(map->conf, pipeconf, i);
+ REG_READ_WITH_AUX(map->conf, i);
+ gma_wait_for_vblank(dev);
+
+ REG_WRITE_WITH_AUX(map->cntr, dspcntr, i);
+ gma_wait_for_vblank(dev);
+ }
+
+oaktrail_crtc_mode_set_exit:
+ gma_power_end(dev);
+ return 0;
+}
+
+static int oaktrail_pipe_set_base(struct drm_crtc *crtc,
+ int x, int y, struct drm_framebuffer *old_fb)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_psb_private *dev_priv = dev->dev_private;
+ struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
+ struct psb_framebuffer *psbfb = to_psb_fb(crtc->primary->fb);
+ int pipe = gma_crtc->pipe;
+ const struct psb_offset *map = &dev_priv->regmap[pipe];
+ unsigned long start, offset;
+
+ u32 dspcntr;
+ int ret = 0;
+
+ /* no fb bound */
+ if (!crtc->primary->fb) {
+ dev_dbg(dev->dev, "No FB bound\n");
+ return 0;
+ }
+
+ if (!gma_power_begin(dev, true))
+ return 0;
+
+ start = psbfb->gtt->offset;
+ offset = y * crtc->primary->fb->pitches[0] + x * (crtc->primary->fb->bits_per_pixel / 8);
+
+ REG_WRITE(map->stride, crtc->primary->fb->pitches[0]);
+
+ dspcntr = REG_READ(map->cntr);
+ dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
+
+ switch (crtc->primary->fb->bits_per_pixel) {
+ case 8:
+ dspcntr |= DISPPLANE_8BPP;
+ break;
+ case 16:
+ if (crtc->primary->fb->depth == 15)
+ dspcntr |= DISPPLANE_15_16BPP;
+ else
+ dspcntr |= DISPPLANE_16BPP;
+ break;
+ case 24:
+ case 32:
+ dspcntr |= DISPPLANE_32BPP_NO_ALPHA;
+ break;
+ default:
+ dev_err(dev->dev, "Unknown color depth\n");
+ ret = -EINVAL;
+ goto pipe_set_base_exit;
+ }
+ REG_WRITE(map->cntr, dspcntr);
+
+ REG_WRITE(map->base, offset);
+ REG_READ(map->base);
+ REG_WRITE(map->surf, start);
+ REG_READ(map->surf);
+
+pipe_set_base_exit:
+ gma_power_end(dev);
+ return ret;
+}
+
+const struct drm_crtc_helper_funcs oaktrail_helper_funcs = {
+ .dpms = oaktrail_crtc_dpms,
+ .mode_fixup = gma_crtc_mode_fixup,
+ .mode_set = oaktrail_crtc_mode_set,
+ .mode_set_base = oaktrail_pipe_set_base,
+ .prepare = gma_crtc_prepare,
+ .commit = gma_crtc_commit,
+};
+
+/* Not used yet */
+const struct gma_clock_funcs mrst_clock_funcs = {
+ .clock = mrst_lvds_clock,
+ .limit = mrst_limit,
+ .pll_is_valid = gma_pll_is_valid,
+};
Code Review / kvmfornfv.git / blobdiff