Add the rt linux 4.1.3-rt3 as base

[kvmfornfv.git] / kernel / drivers / char / ipmi / Kconfig

diff --git a/kernel/drivers/char/ipmi/Kconfig b/kernel/drivers/char/ipmi/Kconfig
new file mode 100644 (file)
index 0000000..6ed9e9f
--- /dev/null
+++ b/kernel/drivers/char/ipmi/Kconfig
@@ -0,0 +1,90 @@
+#
+# IPMI device configuration
+#
+
+menuconfig IPMI_HANDLER
+       tristate 'IPMI top-level message handler'
+       depends on HAS_IOMEM
+       help
+         This enables the central IPMI message handler, required for IPMI
+        to work.
+
+         IPMI is a standard for managing sensors (temperature,
+         voltage, etc.) in a system.
+
+         See <file:Documentation/IPMI.txt> for more details on the driver.
+
+        If unsure, say N.
+
+if IPMI_HANDLER
+
+config IPMI_PANIC_EVENT
+       bool 'Generate a panic event to all BMCs on a panic'
+       help
+         When a panic occurs, this will cause the IPMI message handler to
+        generate an IPMI event describing the panic to each interface
+        registered with the message handler.
+
+config IPMI_PANIC_STRING
+       bool 'Generate OEM events containing the panic string'
+       depends on IPMI_PANIC_EVENT
+       help
+         When a panic occurs, this will cause the IPMI message handler to
+         generate IPMI OEM type f0 events holding the IPMB address of the
+         panic generator (byte 4 of the event), a sequence number for the
+         string (byte 5 of the event) and part of the string (the rest of the
+         event).  Bytes 1, 2, and 3 are the normal usage for an OEM event.
+         You can fetch these events and use the sequence numbers to piece the
+         string together.
+
+config IPMI_DEVICE_INTERFACE
+       tristate 'Device interface for IPMI'
+       help
+         This provides an IOCTL interface to the IPMI message handler so
+        userland processes may use IPMI.  It supports poll() and select().
+
+config IPMI_SI
+       tristate 'IPMI System Interface handler'
+       help
+         Provides a driver for System Interfaces (KCS, SMIC, BT).
+        Currently, only KCS and SMIC are supported.  If
+        you are using IPMI, you should probably say "y" here.
+
+config IPMI_SI_PROBE_DEFAULTS
+       bool 'Probe for all possible IPMI system interfaces by default'
+       default n
+       depends on IPMI_SI
+       help
+        Modern systems will usually expose IPMI interfaces via a discoverable
+        firmware mechanism such as ACPI or DMI. Older systems do not, and so
+        the driver is forced to probe hardware manually. This may cause boot
+        delays. Say "n" here to disable this manual probing. IPMI will then
+        only be available on older systems if the "ipmi_si_intf.trydefaults=1"
+        boot argument is passed.
+
+config IPMI_SSIF
+       tristate 'IPMI SMBus handler (SSIF)'
+       select I2C
+       help
+         Provides a driver for a SMBus interface to a BMC, meaning that you
+        have a driver that must be accessed over an I2C bus instead of a
+        standard interface.  This module requires I2C support.
+
+config IPMI_POWERNV
+       depends on PPC_POWERNV
+       tristate 'POWERNV (OPAL firmware) IPMI interface'
+       help
+         Provides a driver for OPAL firmware-based IPMI interfaces.
+
+config IPMI_WATCHDOG
+       tristate 'IPMI Watchdog Timer'
+       help
+         This enables the IPMI watchdog timer.
+
+config IPMI_POWEROFF
+       tristate 'IPMI Poweroff'
+       help
+         This enables a function to power off the system with IPMI if
+        the IPMI management controller is capable of this.
+
+endif # IPMI_HANDLER