--- /dev/null
+/*
+ *
+ * Broadcom Blutonium firmware driver
+ *
+ * Copyright (C) 2003 Maxim Krasnyansky <maxk@qualcomm.com>
+ * Copyright (C) 2003 Marcel Holtmann <marcel@holtmann.org>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/module.h>
+
+#include <linux/atomic.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+
+#include <linux/device.h>
+#include <linux/firmware.h>
+
+#include <linux/usb.h>
+
+#include <net/bluetooth/bluetooth.h>
+
+#define VERSION "1.2"
+
+static const struct usb_device_id bcm203x_table[] = {
+ /* Broadcom Blutonium (BCM2033) */
+ { USB_DEVICE(0x0a5c, 0x2033) },
+
+ { } /* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, bcm203x_table);
+
+#define BCM203X_ERROR 0
+#define BCM203X_RESET 1
+#define BCM203X_LOAD_MINIDRV 2
+#define BCM203X_SELECT_MEMORY 3
+#define BCM203X_CHECK_MEMORY 4
+#define BCM203X_LOAD_FIRMWARE 5
+#define BCM203X_CHECK_FIRMWARE 6
+
+#define BCM203X_IN_EP 0x81
+#define BCM203X_OUT_EP 0x02
+
+struct bcm203x_data {
+ struct usb_device *udev;
+
+ unsigned long state;
+
+ struct work_struct work;
+ atomic_t shutdown;
+
+ struct urb *urb;
+ unsigned char *buffer;
+
+ unsigned char *fw_data;
+ unsigned int fw_size;
+ unsigned int fw_sent;
+};
+
+static void bcm203x_complete(struct urb *urb)
+{
+ struct bcm203x_data *data = urb->context;
+ struct usb_device *udev = urb->dev;
+ int len;
+
+ BT_DBG("udev %p urb %p", udev, urb);
+
+ if (urb->status) {
+ BT_ERR("URB failed with status %d", urb->status);
+ data->state = BCM203X_ERROR;
+ return;
+ }
+
+ switch (data->state) {
+ case BCM203X_LOAD_MINIDRV:
+ memcpy(data->buffer, "#", 1);
+
+ usb_fill_bulk_urb(urb, udev, usb_sndbulkpipe(udev, BCM203X_OUT_EP),
+ data->buffer, 1, bcm203x_complete, data);
+
+ data->state = BCM203X_SELECT_MEMORY;
+
+ /* use workqueue to have a small delay */
+ schedule_work(&data->work);
+ break;
+
+ case BCM203X_SELECT_MEMORY:
+ usb_fill_int_urb(urb, udev, usb_rcvintpipe(udev, BCM203X_IN_EP),
+ data->buffer, 32, bcm203x_complete, data, 1);
+
+ data->state = BCM203X_CHECK_MEMORY;
+
+ if (usb_submit_urb(data->urb, GFP_ATOMIC) < 0)
+ BT_ERR("Can't submit URB");
+ break;
+
+ case BCM203X_CHECK_MEMORY:
+ if (data->buffer[0] != '#') {
+ BT_ERR("Memory select failed");
+ data->state = BCM203X_ERROR;
+ break;
+ }
+
+ data->state = BCM203X_LOAD_FIRMWARE;
+
+ case BCM203X_LOAD_FIRMWARE:
+ if (data->fw_sent == data->fw_size) {
+ usb_fill_int_urb(urb, udev, usb_rcvintpipe(udev, BCM203X_IN_EP),
+ data->buffer, 32, bcm203x_complete, data, 1);
+
+ data->state = BCM203X_CHECK_FIRMWARE;
+ } else {
+ len = min_t(uint, data->fw_size - data->fw_sent, 4096);
+
+ usb_fill_bulk_urb(urb, udev, usb_sndbulkpipe(udev, BCM203X_OUT_EP),
+ data->fw_data + data->fw_sent, len, bcm203x_complete, data);
+
+ data->fw_sent += len;
+ }
+
+ if (usb_submit_urb(data->urb, GFP_ATOMIC) < 0)
+ BT_ERR("Can't submit URB");
+ break;
+
+ case BCM203X_CHECK_FIRMWARE:
+ if (data->buffer[0] != '.') {
+ BT_ERR("Firmware loading failed");
+ data->state = BCM203X_ERROR;
+ break;
+ }
+
+ data->state = BCM203X_RESET;
+ break;
+ }
+}
+
+static void bcm203x_work(struct work_struct *work)
+{
+ struct bcm203x_data *data =
+ container_of(work, struct bcm203x_data, work);
+
+ if (atomic_read(&data->shutdown))
+ return;
+
+ if (usb_submit_urb(data->urb, GFP_KERNEL) < 0)
+ BT_ERR("Can't submit URB");
+}
+
+static int bcm203x_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+ const struct firmware *firmware;
+ struct usb_device *udev = interface_to_usbdev(intf);
+ struct bcm203x_data *data;
+ int size;
+
+ BT_DBG("intf %p id %p", intf, id);
+
+ if (intf->cur_altsetting->desc.bInterfaceNumber != 0)
+ return -ENODEV;
+
+ data = devm_kzalloc(&intf->dev, sizeof(*data), GFP_KERNEL);
+ if (!data) {
+ BT_ERR("Can't allocate memory for data structure");
+ return -ENOMEM;
+ }
+
+ data->udev = udev;
+ data->state = BCM203X_LOAD_MINIDRV;
+
+ data->urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!data->urb) {
+ BT_ERR("Can't allocate URB");
+ return -ENOMEM;
+ }
+
+ if (request_firmware(&firmware, "BCM2033-MD.hex", &udev->dev) < 0) {
+ BT_ERR("Mini driver request failed");
+ usb_free_urb(data->urb);
+ return -EIO;
+ }
+
+ BT_DBG("minidrv data %p size %zu", firmware->data, firmware->size);
+
+ size = max_t(uint, firmware->size, 4096);
+
+ data->buffer = kmalloc(size, GFP_KERNEL);
+ if (!data->buffer) {
+ BT_ERR("Can't allocate memory for mini driver");
+ release_firmware(firmware);
+ usb_free_urb(data->urb);
+ return -ENOMEM;
+ }
+
+ memcpy(data->buffer, firmware->data, firmware->size);
+
+ usb_fill_bulk_urb(data->urb, udev, usb_sndbulkpipe(udev, BCM203X_OUT_EP),
+ data->buffer, firmware->size, bcm203x_complete, data);
+
+ release_firmware(firmware);
+
+ if (request_firmware(&firmware, "BCM2033-FW.bin", &udev->dev) < 0) {
+ BT_ERR("Firmware request failed");
+ usb_free_urb(data->urb);
+ kfree(data->buffer);
+ return -EIO;
+ }
+
+ BT_DBG("firmware data %p size %zu", firmware->data, firmware->size);
+
+ data->fw_data = kmemdup(firmware->data, firmware->size, GFP_KERNEL);
+ if (!data->fw_data) {
+ BT_ERR("Can't allocate memory for firmware image");
+ release_firmware(firmware);
+ usb_free_urb(data->urb);
+ kfree(data->buffer);
+ return -ENOMEM;
+ }
+
+ data->fw_size = firmware->size;
+ data->fw_sent = 0;
+
+ release_firmware(firmware);
+
+ INIT_WORK(&data->work, bcm203x_work);
+
+ usb_set_intfdata(intf, data);
+
+ /* use workqueue to have a small delay */
+ schedule_work(&data->work);
+
+ return 0;
+}
+
+static void bcm203x_disconnect(struct usb_interface *intf)
+{
+ struct bcm203x_data *data = usb_get_intfdata(intf);
+
+ BT_DBG("intf %p", intf);
+
+ atomic_inc(&data->shutdown);
+ cancel_work_sync(&data->work);
+
+ usb_kill_urb(data->urb);
+
+ usb_set_intfdata(intf, NULL);
+
+ usb_free_urb(data->urb);
+ kfree(data->fw_data);
+ kfree(data->buffer);
+}
+
+static struct usb_driver bcm203x_driver = {
+ .name = "bcm203x",
+ .probe = bcm203x_probe,
+ .disconnect = bcm203x_disconnect,
+ .id_table = bcm203x_table,
+ .disable_hub_initiated_lpm = 1,
+};
+
+module_usb_driver(bcm203x_driver);
+
+MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
+MODULE_DESCRIPTION("Broadcom Blutonium firmware driver ver " VERSION);
+MODULE_VERSION(VERSION);
+MODULE_LICENSE("GPL");
+MODULE_FIRMWARE("BCM2033-MD.hex");
+MODULE_FIRMWARE("BCM2033-FW.bin");
Code Review / kvmfornfv.git / blobdiff