Add the rt linux 4.1.3-rt3 as base

[kvmfornfv.git] / kernel / drivers / block / paride / ktti.c

diff --git a/kernel/drivers/block/paride/ktti.c b/kernel/drivers/block/paride/ktti.c
new file mode 100644 (file)
index 0000000..117ab0e
--- /dev/null
+++ b/kernel/drivers/block/paride/ktti.c
@@ -0,0 +1,128 @@
+/* 
+        ktti.c        (c) 1998  Grant R. Guenther <grant@torque.net>
+                          Under the terms of the GNU General Public License.
+
+       ktti.c is a low-level protocol driver for the KT Technology
+       parallel port adapter.  This adapter is used in the "PHd" 
+        portable hard-drives.  As far as I can tell, this device
+       supports 4-bit mode _only_.  
+
+*/
+
+#define KTTI_VERSION      "1.0"
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+#include <asm/io.h>
+
+#include "paride.h"
+
+#define j44(a,b)                (((a>>4)&0x0f)|(b&0xf0))
+
+/* cont = 0 - access the IDE register file 
+   cont = 1 - access the IDE command set 
+*/
+
+static int  cont_map[2] = { 0x10, 0x08 };
+
+static void  ktti_write_regr( PIA *pi, int cont, int regr, int val)
+
+{      int r;
+
+       r = regr + cont_map[cont];
+
+       w0(r); w2(0xb); w2(0xa); w2(3); w2(6); 
+       w0(val); w2(3); w0(0); w2(6); w2(0xb);
+}
+
+static int ktti_read_regr( PIA *pi, int cont, int regr )
+
+{      int  a, b, r;
+
+        r = regr + cont_map[cont];
+
+        w0(r); w2(0xb); w2(0xa); w2(9); w2(0xc); w2(9); 
+       a = r1(); w2(0xc);  b = r1(); w2(9); w2(0xc); w2(9);
+       return j44(a,b);
+
+}
+
+static void ktti_read_block( PIA *pi, char * buf, int count )
+
+{      int  k, a, b;
+
+       for (k=0;k<count/2;k++) {
+               w0(0x10); w2(0xb); w2(0xa); w2(9); w2(0xc); w2(9);
+               a = r1(); w2(0xc); b = r1(); w2(9);
+               buf[2*k] = j44(a,b);
+               a = r1(); w2(0xc); b = r1(); w2(9);
+               buf[2*k+1] = j44(a,b);
+       }
+}
+
+static void ktti_write_block( PIA *pi, char * buf, int count )
+
+{      int k;
+
+       for (k=0;k<count/2;k++) {
+               w0(0x10); w2(0xb); w2(0xa); w2(3); w2(6);
+               w0(buf[2*k]); w2(3);
+               w0(buf[2*k+1]); w2(6);
+               w2(0xb);
+       }
+}
+
+static void ktti_connect ( PIA *pi  )
+
+{       pi->saved_r0 = r0();
+        pi->saved_r2 = r2();
+       w2(0xb); w2(0xa); w0(0); w2(3); w2(6);  
+}
+
+static void ktti_disconnect ( PIA *pi )
+
+{       w2(0xb); w2(0xa); w0(0xa0); w2(3); w2(4);
+       w0(pi->saved_r0);
+        w2(pi->saved_r2);
+} 
+
+static void ktti_log_adapter( PIA *pi, char * scratch, int verbose )
+
+{       printk("%s: ktti %s, KT adapter at 0x%x, delay %d\n",
+                pi->device,KTTI_VERSION,pi->port,pi->delay);
+
+}
+
+static struct pi_protocol ktti = {
+       .owner          = THIS_MODULE,
+       .name           = "ktti",
+       .max_mode       = 1,
+       .epp_first      = 2,
+       .default_delay  = 1,
+       .max_units      = 1,
+       .write_regr     = ktti_write_regr,
+       .read_regr      = ktti_read_regr,
+       .write_block    = ktti_write_block,
+       .read_block     = ktti_read_block,
+       .connect        = ktti_connect,
+       .disconnect     = ktti_disconnect,
+       .log_adapter    = ktti_log_adapter,
+};
+
+static int __init ktti_init(void)
+{
+       return paride_register(&ktti);
+}
+
+static void __exit ktti_exit(void)
+{
+       paride_unregister(&ktti);
+}
+
+MODULE_LICENSE("GPL");
+module_init(ktti_init)
+module_exit(ktti_exit)