--- /dev/null
+/*
+ * libata-scsi.c - helper library for ATA
+ *
+ * Maintained by: Tejun Heo <tj@kernel.org>
+ * Please ALWAYS copy linux-ide@vger.kernel.org
+ * on emails.
+ *
+ * Copyright 2003-2004 Red Hat, Inc. All rights reserved.
+ * Copyright 2003-2004 Jeff Garzik
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING. If not, write to
+ * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *
+ * libata documentation is available via 'make {ps|pdf}docs',
+ * as Documentation/DocBook/libata.*
+ *
+ * Hardware documentation available from
+ * - http://www.t10.org/
+ * - http://www.t13.org/
+ *
+ */
+
+#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <linux/blkdev.h>
+#include <linux/spinlock.h>
+#include <linux/export.h>
+#include <scsi/scsi.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_eh.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_tcq.h>
+#include <scsi/scsi_transport.h>
+#include <linux/libata.h>
+#include <linux/hdreg.h>
+#include <linux/uaccess.h>
+#include <linux/suspend.h>
+#include <asm/unaligned.h>
+
+#include "libata.h"
+#include "libata-transport.h"
+
+#define ATA_SCSI_RBUF_SIZE 4096
+
+static DEFINE_SPINLOCK(ata_scsi_rbuf_lock);
+static u8 ata_scsi_rbuf[ATA_SCSI_RBUF_SIZE];
+
+typedef unsigned int (*ata_xlat_func_t)(struct ata_queued_cmd *qc);
+
+static struct ata_device *__ata_scsi_find_dev(struct ata_port *ap,
+ const struct scsi_device *scsidev);
+static struct ata_device *ata_scsi_find_dev(struct ata_port *ap,
+ const struct scsi_device *scsidev);
+
+#define RW_RECOVERY_MPAGE 0x1
+#define RW_RECOVERY_MPAGE_LEN 12
+#define CACHE_MPAGE 0x8
+#define CACHE_MPAGE_LEN 20
+#define CONTROL_MPAGE 0xa
+#define CONTROL_MPAGE_LEN 12
+#define ALL_MPAGES 0x3f
+#define ALL_SUB_MPAGES 0xff
+
+
+static const u8 def_rw_recovery_mpage[RW_RECOVERY_MPAGE_LEN] = {
+ RW_RECOVERY_MPAGE,
+ RW_RECOVERY_MPAGE_LEN - 2,
+ (1 << 7), /* AWRE */
+ 0, /* read retry count */
+ 0, 0, 0, 0,
+ 0, /* write retry count */
+ 0, 0, 0
+};
+
+static const u8 def_cache_mpage[CACHE_MPAGE_LEN] = {
+ CACHE_MPAGE,
+ CACHE_MPAGE_LEN - 2,
+ 0, /* contains WCE, needs to be 0 for logic */
+ 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, /* contains DRA, needs to be 0 for logic */
+ 0, 0, 0, 0, 0, 0, 0
+};
+
+static const u8 def_control_mpage[CONTROL_MPAGE_LEN] = {
+ CONTROL_MPAGE,
+ CONTROL_MPAGE_LEN - 2,
+ 2, /* DSENSE=0, GLTSD=1 */
+ 0, /* [QAM+QERR may be 1, see 05-359r1] */
+ 0, 0, 0, 0, 0xff, 0xff,
+ 0, 30 /* extended self test time, see 05-359r1 */
+};
+
+static const char *ata_lpm_policy_names[] = {
+ [ATA_LPM_UNKNOWN] = "max_performance",
+ [ATA_LPM_MAX_POWER] = "max_performance",
+ [ATA_LPM_MED_POWER] = "medium_power",
+ [ATA_LPM_MIN_POWER] = "min_power",
+};
+
+static ssize_t ata_scsi_lpm_store(struct device *device,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct Scsi_Host *shost = class_to_shost(device);
+ struct ata_port *ap = ata_shost_to_port(shost);
+ struct ata_link *link;
+ struct ata_device *dev;
+ enum ata_lpm_policy policy;
+ unsigned long flags;
+
+ /* UNKNOWN is internal state, iterate from MAX_POWER */
+ for (policy = ATA_LPM_MAX_POWER;
+ policy < ARRAY_SIZE(ata_lpm_policy_names); policy++) {
+ const char *name = ata_lpm_policy_names[policy];
+
+ if (strncmp(name, buf, strlen(name)) == 0)
+ break;
+ }
+ if (policy == ARRAY_SIZE(ata_lpm_policy_names))
+ return -EINVAL;
+
+ spin_lock_irqsave(ap->lock, flags);
+
+ ata_for_each_link(link, ap, EDGE) {
+ ata_for_each_dev(dev, &ap->link, ENABLED) {
+ if (dev->horkage & ATA_HORKAGE_NOLPM) {
+ count = -EOPNOTSUPP;
+ goto out_unlock;
+ }
+ }
+ }
+
+ ap->target_lpm_policy = policy;
+ ata_port_schedule_eh(ap);
+out_unlock:
+ spin_unlock_irqrestore(ap->lock, flags);
+ return count;
+}
+
+static ssize_t ata_scsi_lpm_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct ata_port *ap = ata_shost_to_port(shost);
+
+ if (ap->target_lpm_policy >= ARRAY_SIZE(ata_lpm_policy_names))
+ return -EINVAL;
+
+ return snprintf(buf, PAGE_SIZE, "%s\n",
+ ata_lpm_policy_names[ap->target_lpm_policy]);
+}
+DEVICE_ATTR(link_power_management_policy, S_IRUGO | S_IWUSR,
+ ata_scsi_lpm_show, ata_scsi_lpm_store);
+EXPORT_SYMBOL_GPL(dev_attr_link_power_management_policy);
+
+static ssize_t ata_scsi_park_show(struct device *device,
+ struct device_attribute *attr, char *buf)
+{
+ struct scsi_device *sdev = to_scsi_device(device);
+ struct ata_port *ap;
+ struct ata_link *link;
+ struct ata_device *dev;
+ unsigned long flags, now;
+ unsigned int uninitialized_var(msecs);
+ int rc = 0;
+
+ ap = ata_shost_to_port(sdev->host);
+
+ spin_lock_irqsave(ap->lock, flags);
+ dev = ata_scsi_find_dev(ap, sdev);
+ if (!dev) {
+ rc = -ENODEV;
+ goto unlock;
+ }
+ if (dev->flags & ATA_DFLAG_NO_UNLOAD) {
+ rc = -EOPNOTSUPP;
+ goto unlock;
+ }
+
+ link = dev->link;
+ now = jiffies;
+ if (ap->pflags & ATA_PFLAG_EH_IN_PROGRESS &&
+ link->eh_context.unloaded_mask & (1 << dev->devno) &&
+ time_after(dev->unpark_deadline, now))
+ msecs = jiffies_to_msecs(dev->unpark_deadline - now);
+ else
+ msecs = 0;
+
+unlock:
+ spin_unlock_irq(ap->lock);
+
+ return rc ? rc : snprintf(buf, 20, "%u\n", msecs);
+}
+
+static ssize_t ata_scsi_park_store(struct device *device,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ struct scsi_device *sdev = to_scsi_device(device);
+ struct ata_port *ap;
+ struct ata_device *dev;
+ long int input;
+ unsigned long flags;
+ int rc;
+
+ rc = kstrtol(buf, 10, &input);
+ if (rc)
+ return rc;
+ if (input < -2)
+ return -EINVAL;
+ if (input > ATA_TMOUT_MAX_PARK) {
+ rc = -EOVERFLOW;
+ input = ATA_TMOUT_MAX_PARK;
+ }
+
+ ap = ata_shost_to_port(sdev->host);
+
+ spin_lock_irqsave(ap->lock, flags);
+ dev = ata_scsi_find_dev(ap, sdev);
+ if (unlikely(!dev)) {
+ rc = -ENODEV;
+ goto unlock;
+ }
+ if (dev->class != ATA_DEV_ATA &&
+ dev->class != ATA_DEV_ZAC) {
+ rc = -EOPNOTSUPP;
+ goto unlock;
+ }
+
+ if (input >= 0) {
+ if (dev->flags & ATA_DFLAG_NO_UNLOAD) {
+ rc = -EOPNOTSUPP;
+ goto unlock;
+ }
+
+ dev->unpark_deadline = ata_deadline(jiffies, input);
+ dev->link->eh_info.dev_action[dev->devno] |= ATA_EH_PARK;
+ ata_port_schedule_eh(ap);
+ complete(&ap->park_req_pending);
+ } else {
+ switch (input) {
+ case -1:
+ dev->flags &= ~ATA_DFLAG_NO_UNLOAD;
+ break;
+ case -2:
+ dev->flags |= ATA_DFLAG_NO_UNLOAD;
+ break;
+ }
+ }
+unlock:
+ spin_unlock_irqrestore(ap->lock, flags);
+
+ return rc ? rc : len;
+}
+DEVICE_ATTR(unload_heads, S_IRUGO | S_IWUSR,
+ ata_scsi_park_show, ata_scsi_park_store);
+EXPORT_SYMBOL_GPL(dev_attr_unload_heads);
+
+void ata_scsi_set_sense(struct scsi_cmnd *cmd, u8 sk, u8 asc, u8 ascq)
+{
+ if (!cmd)
+ return;
+
+ cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION;
+
+ scsi_build_sense_buffer(0, cmd->sense_buffer, sk, asc, ascq);
+}
+
+void ata_scsi_set_sense_information(struct scsi_cmnd *cmd,
+ const struct ata_taskfile *tf)
+{
+ u64 information;
+
+ if (!cmd)
+ return;
+
+ information = ata_tf_read_block(tf, NULL);
+ scsi_set_sense_information(cmd->sense_buffer, information);
+}
+
+static ssize_t
+ata_scsi_em_message_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct ata_port *ap = ata_shost_to_port(shost);
+ if (ap->ops->em_store && (ap->flags & ATA_FLAG_EM))
+ return ap->ops->em_store(ap, buf, count);
+ return -EINVAL;
+}
+
+static ssize_t
+ata_scsi_em_message_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct ata_port *ap = ata_shost_to_port(shost);
+
+ if (ap->ops->em_show && (ap->flags & ATA_FLAG_EM))
+ return ap->ops->em_show(ap, buf);
+ return -EINVAL;
+}
+DEVICE_ATTR(em_message, S_IRUGO | S_IWUSR,
+ ata_scsi_em_message_show, ata_scsi_em_message_store);
+EXPORT_SYMBOL_GPL(dev_attr_em_message);
+
+static ssize_t
+ata_scsi_em_message_type_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct ata_port *ap = ata_shost_to_port(shost);
+
+ return snprintf(buf, 23, "%d\n", ap->em_message_type);
+}
+DEVICE_ATTR(em_message_type, S_IRUGO,
+ ata_scsi_em_message_type_show, NULL);
+EXPORT_SYMBOL_GPL(dev_attr_em_message_type);
+
+static ssize_t
+ata_scsi_activity_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct scsi_device *sdev = to_scsi_device(dev);
+ struct ata_port *ap = ata_shost_to_port(sdev->host);
+ struct ata_device *atadev = ata_scsi_find_dev(ap, sdev);
+
+ if (atadev && ap->ops->sw_activity_show &&
+ (ap->flags & ATA_FLAG_SW_ACTIVITY))
+ return ap->ops->sw_activity_show(atadev, buf);
+ return -EINVAL;
+}
+
+static ssize_t
+ata_scsi_activity_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct scsi_device *sdev = to_scsi_device(dev);
+ struct ata_port *ap = ata_shost_to_port(sdev->host);
+ struct ata_device *atadev = ata_scsi_find_dev(ap, sdev);
+ enum sw_activity val;
+ int rc;
+
+ if (atadev && ap->ops->sw_activity_store &&
+ (ap->flags & ATA_FLAG_SW_ACTIVITY)) {
+ val = simple_strtoul(buf, NULL, 0);
+ switch (val) {
+ case OFF: case BLINK_ON: case BLINK_OFF:
+ rc = ap->ops->sw_activity_store(atadev, val);
+ if (!rc)
+ return count;
+ else
+ return rc;
+ }
+ }
+ return -EINVAL;
+}
+DEVICE_ATTR(sw_activity, S_IWUSR | S_IRUGO, ata_scsi_activity_show,
+ ata_scsi_activity_store);
+EXPORT_SYMBOL_GPL(dev_attr_sw_activity);
+
+struct device_attribute *ata_common_sdev_attrs[] = {
+ &dev_attr_unload_heads,
+ NULL
+};
+EXPORT_SYMBOL_GPL(ata_common_sdev_attrs);
+
+static void ata_scsi_invalid_field(struct scsi_cmnd *cmd)
+{
+ ata_scsi_set_sense(cmd, ILLEGAL_REQUEST, 0x24, 0x0);
+ /* "Invalid field in cbd" */
+ cmd->scsi_done(cmd);
+}
+
+/**
+ * ata_std_bios_param - generic bios head/sector/cylinder calculator used by sd.
+ * @sdev: SCSI device for which BIOS geometry is to be determined
+ * @bdev: block device associated with @sdev
+ * @capacity: capacity of SCSI device
+ * @geom: location to which geometry will be output
+ *
+ * Generic bios head/sector/cylinder calculator
+ * used by sd. Most BIOSes nowadays expect a XXX/255/16 (CHS)
+ * mapping. Some situations may arise where the disk is not
+ * bootable if this is not used.
+ *
+ * LOCKING:
+ * Defined by the SCSI layer. We don't really care.
+ *
+ * RETURNS:
+ * Zero.
+ */
+int ata_std_bios_param(struct scsi_device *sdev, struct block_device *bdev,
+ sector_t capacity, int geom[])
+{
+ geom[0] = 255;
+ geom[1] = 63;
+ sector_div(capacity, 255*63);
+ geom[2] = capacity;
+
+ return 0;
+}
+
+/**
+ * ata_scsi_unlock_native_capacity - unlock native capacity
+ * @sdev: SCSI device to adjust device capacity for
+ *
+ * This function is called if a partition on @sdev extends beyond
+ * the end of the device. It requests EH to unlock HPA.
+ *
+ * LOCKING:
+ * Defined by the SCSI layer. Might sleep.
+ */
+void ata_scsi_unlock_native_capacity(struct scsi_device *sdev)
+{
+ struct ata_port *ap = ata_shost_to_port(sdev->host);
+ struct ata_device *dev;
+ unsigned long flags;
+
+ spin_lock_irqsave(ap->lock, flags);
+
+ dev = ata_scsi_find_dev(ap, sdev);
+ if (dev && dev->n_sectors < dev->n_native_sectors) {
+ dev->flags |= ATA_DFLAG_UNLOCK_HPA;
+ dev->link->eh_info.action |= ATA_EH_RESET;
+ ata_port_schedule_eh(ap);
+ }
+
+ spin_unlock_irqrestore(ap->lock, flags);
+ ata_port_wait_eh(ap);
+}
+
+/**
+ * ata_get_identity - Handler for HDIO_GET_IDENTITY ioctl
+ * @ap: target port
+ * @sdev: SCSI device to get identify data for
+ * @arg: User buffer area for identify data
+ *
+ * LOCKING:
+ * Defined by the SCSI layer. We don't really care.
+ *
+ * RETURNS:
+ * Zero on success, negative errno on error.
+ */
+static int ata_get_identity(struct ata_port *ap, struct scsi_device *sdev,
+ void __user *arg)
+{
+ struct ata_device *dev = ata_scsi_find_dev(ap, sdev);
+ u16 __user *dst = arg;
+ char buf[40];
+
+ if (!dev)
+ return -ENOMSG;
+
+ if (copy_to_user(dst, dev->id, ATA_ID_WORDS * sizeof(u16)))
+ return -EFAULT;
+
+ ata_id_string(dev->id, buf, ATA_ID_PROD, ATA_ID_PROD_LEN);
+ if (copy_to_user(dst + ATA_ID_PROD, buf, ATA_ID_PROD_LEN))
+ return -EFAULT;
+
+ ata_id_string(dev->id, buf, ATA_ID_FW_REV, ATA_ID_FW_REV_LEN);
+ if (copy_to_user(dst + ATA_ID_FW_REV, buf, ATA_ID_FW_REV_LEN))
+ return -EFAULT;
+
+ ata_id_string(dev->id, buf, ATA_ID_SERNO, ATA_ID_SERNO_LEN);
+ if (copy_to_user(dst + ATA_ID_SERNO, buf, ATA_ID_SERNO_LEN))
+ return -EFAULT;
+
+ return 0;
+}
+
+/**
+ * ata_cmd_ioctl - Handler for HDIO_DRIVE_CMD ioctl
+ * @scsidev: Device to which we are issuing command
+ * @arg: User provided data for issuing command
+ *
+ * LOCKING:
+ * Defined by the SCSI layer. We don't really care.
+ *
+ * RETURNS:
+ * Zero on success, negative errno on error.
+ */
+int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg)
+{
+ int rc = 0;
+ u8 scsi_cmd[MAX_COMMAND_SIZE];
+ u8 args[4], *argbuf = NULL, *sensebuf = NULL;
+ int argsize = 0;
+ enum dma_data_direction data_dir;
+ int cmd_result;
+
+ if (arg == NULL)
+ return -EINVAL;
+
+ if (copy_from_user(args, arg, sizeof(args)))
+ return -EFAULT;
+
+ sensebuf = kzalloc(SCSI_SENSE_BUFFERSIZE, GFP_NOIO);
+ if (!sensebuf)
+ return -ENOMEM;
+
+ memset(scsi_cmd, 0, sizeof(scsi_cmd));
+
+ if (args[3]) {
+ argsize = ATA_SECT_SIZE * args[3];
+ argbuf = kmalloc(argsize, GFP_KERNEL);
+ if (argbuf == NULL) {
+ rc = -ENOMEM;
+ goto error;
+ }
+
+ scsi_cmd[1] = (4 << 1); /* PIO Data-in */
+ scsi_cmd[2] = 0x0e; /* no off.line or cc, read from dev,
+ block count in sector count field */
+ data_dir = DMA_FROM_DEVICE;
+ } else {
+ scsi_cmd[1] = (3 << 1); /* Non-data */
+ scsi_cmd[2] = 0x20; /* cc but no off.line or data xfer */
+ data_dir = DMA_NONE;
+ }
+
+ scsi_cmd[0] = ATA_16;
+
+ scsi_cmd[4] = args[2];
+ if (args[0] == ATA_CMD_SMART) { /* hack -- ide driver does this too */
+ scsi_cmd[6] = args[3];
+ scsi_cmd[8] = args[1];
+ scsi_cmd[10] = 0x4f;
+ scsi_cmd[12] = 0xc2;
+ } else {
+ scsi_cmd[6] = args[1];
+ }
+ scsi_cmd[14] = args[0];
+
+ /* Good values for timeout and retries? Values below
+ from scsi_ioctl_send_command() for default case... */
+ cmd_result = scsi_execute(scsidev, scsi_cmd, data_dir, argbuf, argsize,
+ sensebuf, (10*HZ), 5, 0, NULL);
+
+ if (driver_byte(cmd_result) == DRIVER_SENSE) {/* sense data available */
+ u8 *desc = sensebuf + 8;
+ cmd_result &= ~(0xFF<<24); /* DRIVER_SENSE is not an error */
+
+ /* If we set cc then ATA pass-through will cause a
+ * check condition even if no error. Filter that. */
+ if (cmd_result & SAM_STAT_CHECK_CONDITION) {
+ struct scsi_sense_hdr sshdr;
+ scsi_normalize_sense(sensebuf, SCSI_SENSE_BUFFERSIZE,
+ &sshdr);
+ if (sshdr.sense_key == RECOVERED_ERROR &&
+ sshdr.asc == 0 && sshdr.ascq == 0x1d)
+ cmd_result &= ~SAM_STAT_CHECK_CONDITION;
+ }
+
+ /* Send userspace a few ATA registers (same as drivers/ide) */
+ if (sensebuf[0] == 0x72 && /* format is "descriptor" */
+ desc[0] == 0x09) { /* code is "ATA Descriptor" */
+ args[0] = desc[13]; /* status */
+ args[1] = desc[3]; /* error */
+ args[2] = desc[5]; /* sector count (0:7) */
+ if (copy_to_user(arg, args, sizeof(args)))
+ rc = -EFAULT;
+ }
+ }
+
+
+ if (cmd_result) {
+ rc = -EIO;
+ goto error;
+ }
+
+ if ((argbuf)
+ && copy_to_user(arg + sizeof(args), argbuf, argsize))
+ rc = -EFAULT;
+error:
+ kfree(sensebuf);
+ kfree(argbuf);
+ return rc;
+}
+
+/**
+ * ata_task_ioctl - Handler for HDIO_DRIVE_TASK ioctl
+ * @scsidev: Device to which we are issuing command
+ * @arg: User provided data for issuing command
+ *
+ * LOCKING:
+ * Defined by the SCSI layer. We don't really care.
+ *
+ * RETURNS:
+ * Zero on success, negative errno on error.
+ */
+int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg)
+{
+ int rc = 0;
+ u8 scsi_cmd[MAX_COMMAND_SIZE];
+ u8 args[7], *sensebuf = NULL;
+ int cmd_result;
+
+ if (arg == NULL)
+ return -EINVAL;
+
+ if (copy_from_user(args, arg, sizeof(args)))
+ return -EFAULT;
+
+ sensebuf = kzalloc(SCSI_SENSE_BUFFERSIZE, GFP_NOIO);
+ if (!sensebuf)
+ return -ENOMEM;
+
+ memset(scsi_cmd, 0, sizeof(scsi_cmd));
+ scsi_cmd[0] = ATA_16;
+ scsi_cmd[1] = (3 << 1); /* Non-data */
+ scsi_cmd[2] = 0x20; /* cc but no off.line or data xfer */
+ scsi_cmd[4] = args[1];
+ scsi_cmd[6] = args[2];
+ scsi_cmd[8] = args[3];
+ scsi_cmd[10] = args[4];
+ scsi_cmd[12] = args[5];
+ scsi_cmd[13] = args[6] & 0x4f;
+ scsi_cmd[14] = args[0];
+
+ /* Good values for timeout and retries? Values below
+ from scsi_ioctl_send_command() for default case... */
+ cmd_result = scsi_execute(scsidev, scsi_cmd, DMA_NONE, NULL, 0,
+ sensebuf, (10*HZ), 5, 0, NULL);
+
+ if (driver_byte(cmd_result) == DRIVER_SENSE) {/* sense data available */
+ u8 *desc = sensebuf + 8;
+ cmd_result &= ~(0xFF<<24); /* DRIVER_SENSE is not an error */
+
+ /* If we set cc then ATA pass-through will cause a
+ * check condition even if no error. Filter that. */
+ if (cmd_result & SAM_STAT_CHECK_CONDITION) {
+ struct scsi_sense_hdr sshdr;
+ scsi_normalize_sense(sensebuf, SCSI_SENSE_BUFFERSIZE,
+ &sshdr);
+ if (sshdr.sense_key == RECOVERED_ERROR &&
+ sshdr.asc == 0 && sshdr.ascq == 0x1d)
+ cmd_result &= ~SAM_STAT_CHECK_CONDITION;
+ }
+
+ /* Send userspace ATA registers */
+ if (sensebuf[0] == 0x72 && /* format is "descriptor" */
+ desc[0] == 0x09) {/* code is "ATA Descriptor" */
+ args[0] = desc[13]; /* status */
+ args[1] = desc[3]; /* error */
+ args[2] = desc[5]; /* sector count (0:7) */
+ args[3] = desc[7]; /* lbal */
+ args[4] = desc[9]; /* lbam */
+ args[5] = desc[11]; /* lbah */
+ args[6] = desc[12]; /* select */
+ if (copy_to_user(arg, args, sizeof(args)))
+ rc = -EFAULT;
+ }
+ }
+
+ if (cmd_result) {
+ rc = -EIO;
+ goto error;
+ }
+
+ error:
+ kfree(sensebuf);
+ return rc;
+}
+
+static int ata_ioc32(struct ata_port *ap)
+{
+ if (ap->flags & ATA_FLAG_PIO_DMA)
+ return 1;
+ if (ap->pflags & ATA_PFLAG_PIO32)
+ return 1;
+ return 0;
+}
+
+int ata_sas_scsi_ioctl(struct ata_port *ap, struct scsi_device *scsidev,
+ int cmd, void __user *arg)
+{
+ int val = -EINVAL, rc = -EINVAL;
+ unsigned long flags;
+
+ switch (cmd) {
+ case ATA_IOC_GET_IO32:
+ spin_lock_irqsave(ap->lock, flags);
+ val = ata_ioc32(ap);
+ spin_unlock_irqrestore(ap->lock, flags);
+ if (copy_to_user(arg, &val, 1))
+ return -EFAULT;
+ return 0;
+
+ case ATA_IOC_SET_IO32:
+ val = (unsigned long) arg;
+ rc = 0;
+ spin_lock_irqsave(ap->lock, flags);
+ if (ap->pflags & ATA_PFLAG_PIO32CHANGE) {
+ if (val)
+ ap->pflags |= ATA_PFLAG_PIO32;
+ else
+ ap->pflags &= ~ATA_PFLAG_PIO32;
+ } else {
+ if (val != ata_ioc32(ap))
+ rc = -EINVAL;
+ }
+ spin_unlock_irqrestore(ap->lock, flags);
+ return rc;
+
+ case HDIO_GET_IDENTITY:
+ return ata_get_identity(ap, scsidev, arg);
+
+ case HDIO_DRIVE_CMD:
+ if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO))
+ return -EACCES;
+ return ata_cmd_ioctl(scsidev, arg);
+
+ case HDIO_DRIVE_TASK:
+ if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO))
+ return -EACCES;
+ return ata_task_ioctl(scsidev, arg);
+
+ default:
+ rc = -ENOTTY;
+ break;
+ }
+
+ return rc;
+}
+EXPORT_SYMBOL_GPL(ata_sas_scsi_ioctl);
+
+int ata_scsi_ioctl(struct scsi_device *scsidev, int cmd, void __user *arg)
+{
+ return ata_sas_scsi_ioctl(ata_shost_to_port(scsidev->host),
+ scsidev, cmd, arg);
+}
+EXPORT_SYMBOL_GPL(ata_scsi_ioctl);
+
+/**
+ * ata_scsi_qc_new - acquire new ata_queued_cmd reference
+ * @dev: ATA device to which the new command is attached
+ * @cmd: SCSI command that originated this ATA command
+ *
+ * Obtain a reference to an unused ata_queued_cmd structure,
+ * which is the basic libata structure representing a single
+ * ATA command sent to the hardware.
+ *
+ * If a command was available, fill in the SCSI-specific
+ * portions of the structure with information on the
+ * current command.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ *
+ * RETURNS:
+ * Command allocated, or %NULL if none available.
+ */
+static struct ata_queued_cmd *ata_scsi_qc_new(struct ata_device *dev,
+ struct scsi_cmnd *cmd)
+{
+ struct ata_queued_cmd *qc;
+
+ qc = ata_qc_new_init(dev, cmd->request->tag);
+ if (qc) {
+ qc->scsicmd = cmd;
+ qc->scsidone = cmd->scsi_done;
+
+ qc->sg = scsi_sglist(cmd);
+ qc->n_elem = scsi_sg_count(cmd);
+ } else {
+ cmd->result = (DID_OK << 16) | (QUEUE_FULL << 1);
+ cmd->scsi_done(cmd);
+ }
+
+ return qc;
+}
+
+static void ata_qc_set_pc_nbytes(struct ata_queued_cmd *qc)
+{
+ struct scsi_cmnd *scmd = qc->scsicmd;
+
+ qc->extrabytes = scmd->request->extra_len;
+ qc->nbytes = scsi_bufflen(scmd) + qc->extrabytes;
+}
+
+/**
+ * ata_dump_status - user friendly display of error info
+ * @id: id of the port in question
+ * @tf: ptr to filled out taskfile
+ *
+ * Decode and dump the ATA error/status registers for the user so
+ * that they have some idea what really happened at the non
+ * make-believe layer.
+ *
+ * LOCKING:
+ * inherited from caller
+ */
+static void ata_dump_status(unsigned id, struct ata_taskfile *tf)
+{
+ u8 stat = tf->command, err = tf->feature;
+
+ printk(KERN_WARNING "ata%u: status=0x%02x { ", id, stat);
+ if (stat & ATA_BUSY) {
+ printk("Busy }\n"); /* Data is not valid in this case */
+ } else {
+ if (stat & ATA_DRDY) printk("DriveReady ");
+ if (stat & ATA_DF) printk("DeviceFault ");
+ if (stat & ATA_DSC) printk("SeekComplete ");
+ if (stat & ATA_DRQ) printk("DataRequest ");
+ if (stat & ATA_CORR) printk("CorrectedError ");
+ if (stat & ATA_SENSE) printk("Sense ");
+ if (stat & ATA_ERR) printk("Error ");
+ printk("}\n");
+
+ if (err) {
+ printk(KERN_WARNING "ata%u: error=0x%02x { ", id, err);
+ if (err & ATA_ABORTED) printk("DriveStatusError ");
+ if (err & ATA_ICRC) {
+ if (err & ATA_ABORTED)
+ printk("BadCRC ");
+ else printk("Sector ");
+ }
+ if (err & ATA_UNC) printk("UncorrectableError ");
+ if (err & ATA_IDNF) printk("SectorIdNotFound ");
+ if (err & ATA_TRK0NF) printk("TrackZeroNotFound ");
+ if (err & ATA_AMNF) printk("AddrMarkNotFound ");
+ printk("}\n");
+ }
+ }
+}
+
+/**
+ * ata_to_sense_error - convert ATA error to SCSI error
+ * @id: ATA device number
+ * @drv_stat: value contained in ATA status register
+ * @drv_err: value contained in ATA error register
+ * @sk: the sense key we'll fill out
+ * @asc: the additional sense code we'll fill out
+ * @ascq: the additional sense code qualifier we'll fill out
+ * @verbose: be verbose
+ *
+ * Converts an ATA error into a SCSI error. Fill out pointers to
+ * SK, ASC, and ASCQ bytes for later use in fixed or descriptor
+ * format sense blocks.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ */
+static void ata_to_sense_error(unsigned id, u8 drv_stat, u8 drv_err, u8 *sk,
+ u8 *asc, u8 *ascq, int verbose)
+{
+ int i;
+
+ /* Based on the 3ware driver translation table */
+ static const unsigned char sense_table[][4] = {
+ /* BBD|ECC|ID|MAR */
+ {0xd1, ABORTED_COMMAND, 0x00, 0x00},
+ // Device busy Aborted command
+ /* BBD|ECC|ID */
+ {0xd0, ABORTED_COMMAND, 0x00, 0x00},
+ // Device busy Aborted command
+ /* ECC|MC|MARK */
+ {0x61, HARDWARE_ERROR, 0x00, 0x00},
+ // Device fault Hardware error
+ /* ICRC|ABRT */ /* NB: ICRC & !ABRT is BBD */
+ {0x84, ABORTED_COMMAND, 0x47, 0x00},
+ // Data CRC error SCSI parity error
+ /* MC|ID|ABRT|TRK0|MARK */
+ {0x37, NOT_READY, 0x04, 0x00},
+ // Unit offline Not ready
+ /* MCR|MARK */
+ {0x09, NOT_READY, 0x04, 0x00},
+ // Unrecovered disk error Not ready
+ /* Bad address mark */
+ {0x01, MEDIUM_ERROR, 0x13, 0x00},
+ // Address mark not found for data field
+ /* TRK0 - Track 0 not found */
+ {0x02, HARDWARE_ERROR, 0x00, 0x00},
+ // Hardware error
+ /* Abort: 0x04 is not translated here, see below */
+ /* Media change request */
+ {0x08, NOT_READY, 0x04, 0x00},
+ // FIXME: faking offline
+ /* SRV/IDNF - ID not found */
+ {0x10, ILLEGAL_REQUEST, 0x21, 0x00},
+ // Logical address out of range
+ /* MC - Media Changed */
+ {0x20, UNIT_ATTENTION, 0x28, 0x00},
+ // Not ready to ready change, medium may have changed
+ /* ECC - Uncorrectable ECC error */
+ {0x40, MEDIUM_ERROR, 0x11, 0x04},
+ // Unrecovered read error
+ /* BBD - block marked bad */
+ {0x80, MEDIUM_ERROR, 0x11, 0x04},
+ // Block marked bad Medium error, unrecovered read error
+ {0xFF, 0xFF, 0xFF, 0xFF}, // END mark
+ };
+ static const unsigned char stat_table[][4] = {
+ /* Must be first because BUSY means no other bits valid */
+ {0x80, ABORTED_COMMAND, 0x47, 0x00},
+ // Busy, fake parity for now
+ {0x40, ILLEGAL_REQUEST, 0x21, 0x04},
+ // Device ready, unaligned write command
+ {0x20, HARDWARE_ERROR, 0x44, 0x00},
+ // Device fault, internal target failure
+ {0x08, ABORTED_COMMAND, 0x47, 0x00},
+ // Timed out in xfer, fake parity for now
+ {0x04, RECOVERED_ERROR, 0x11, 0x00},
+ // Recovered ECC error Medium error, recovered
+ {0xFF, 0xFF, 0xFF, 0xFF}, // END mark
+ };
+
+ /*
+ * Is this an error we can process/parse
+ */
+ if (drv_stat & ATA_BUSY) {
+ drv_err = 0; /* Ignore the err bits, they're invalid */
+ }
+
+ if (drv_err) {
+ /* Look for drv_err */
+ for (i = 0; sense_table[i][0] != 0xFF; i++) {
+ /* Look for best matches first */
+ if ((sense_table[i][0] & drv_err) ==
+ sense_table[i][0]) {
+ *sk = sense_table[i][1];
+ *asc = sense_table[i][2];
+ *ascq = sense_table[i][3];
+ goto translate_done;
+ }
+ }
+ }
+
+ /*
+ * Fall back to interpreting status bits. Note that if the drv_err
+ * has only the ABRT bit set, we decode drv_stat. ABRT by itself
+ * is not descriptive enough.
+ */
+ for (i = 0; stat_table[i][0] != 0xFF; i++) {
+ if (stat_table[i][0] & drv_stat) {
+ *sk = stat_table[i][1];
+ *asc = stat_table[i][2];
+ *ascq = stat_table[i][3];
+ goto translate_done;
+ }
+ }
+
+ /*
+ * We need a sensible error return here, which is tricky, and one
+ * that won't cause people to do things like return a disk wrongly.
+ */
+ *sk = ABORTED_COMMAND;
+ *asc = 0x00;
+ *ascq = 0x00;
+
+ translate_done:
+ if (verbose)
+ printk(KERN_ERR "ata%u: translated ATA stat/err 0x%02x/%02x "
+ "to SCSI SK/ASC/ASCQ 0x%x/%02x/%02x\n",
+ id, drv_stat, drv_err, *sk, *asc, *ascq);
+ return;
+}
+
+/*
+ * ata_gen_passthru_sense - Generate check condition sense block.
+ * @qc: Command that completed.
+ *
+ * This function is specific to the ATA descriptor format sense
+ * block specified for the ATA pass through commands. Regardless
+ * of whether the command errored or not, return a sense
+ * block. Copy all controller registers into the sense
+ * block. If there was no error, we get the request from an ATA
+ * passthrough command, so we use the following sense data:
+ * sk = RECOVERED ERROR
+ * asc,ascq = ATA PASS-THROUGH INFORMATION AVAILABLE
+ *
+ *
+ * LOCKING:
+ * None.
+ */
+static void ata_gen_passthru_sense(struct ata_queued_cmd *qc)
+{
+ struct scsi_cmnd *cmd = qc->scsicmd;
+ struct ata_taskfile *tf = &qc->result_tf;
+ unsigned char *sb = cmd->sense_buffer;
+ unsigned char *desc = sb + 8;
+ int verbose = qc->ap->ops->error_handler == NULL;
+
+ memset(sb, 0, SCSI_SENSE_BUFFERSIZE);
+
+ cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION;
+
+ /*
+ * Use ata_to_sense_error() to map status register bits
+ * onto sense key, asc & ascq.
+ */
+ if (qc->err_mask ||
+ tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ)) {
+ ata_to_sense_error(qc->ap->print_id, tf->command, tf->feature,
+ &sb[1], &sb[2], &sb[3], verbose);
+ sb[1] &= 0x0f;
+ } else {
+ sb[1] = RECOVERED_ERROR;
+ sb[2] = 0;
+ sb[3] = 0x1D;
+ }
+
+ /*
+ * Sense data is current and format is descriptor.
+ */
+ sb[0] = 0x72;
+
+ desc[0] = 0x09;
+
+ /* set length of additional sense data */
+ sb[7] = 14;
+ desc[1] = 12;
+
+ /*
+ * Copy registers into sense buffer.
+ */
+ desc[2] = 0x00;
+ desc[3] = tf->feature; /* == error reg */
+ desc[5] = tf->nsect;
+ desc[7] = tf->lbal;
+ desc[9] = tf->lbam;
+ desc[11] = tf->lbah;
+ desc[12] = tf->device;
+ desc[13] = tf->command; /* == status reg */
+
+ /*
+ * Fill in Extend bit, and the high order bytes
+ * if applicable.
+ */
+ if (tf->flags & ATA_TFLAG_LBA48) {
+ desc[2] |= 0x01;
+ desc[4] = tf->hob_nsect;
+ desc[6] = tf->hob_lbal;
+ desc[8] = tf->hob_lbam;
+ desc[10] = tf->hob_lbah;
+ }
+}
+
+/**
+ * ata_gen_ata_sense - generate a SCSI fixed sense block
+ * @qc: Command that we are erroring out
+ *
+ * Generate sense block for a failed ATA command @qc. Descriptor
+ * format is used to accommodate LBA48 block address.
+ *
+ * LOCKING:
+ * None.
+ */
+static void ata_gen_ata_sense(struct ata_queued_cmd *qc)
+{
+ struct ata_device *dev = qc->dev;
+ struct scsi_cmnd *cmd = qc->scsicmd;
+ struct ata_taskfile *tf = &qc->result_tf;
+ unsigned char *sb = cmd->sense_buffer;
+ unsigned char *desc = sb + 8;
+ int verbose = qc->ap->ops->error_handler == NULL;
+ u64 block;
+
+ memset(sb, 0, SCSI_SENSE_BUFFERSIZE);
+
+ cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION;
+
+ /* sense data is current and format is descriptor */
+ sb[0] = 0x72;
+
+ /* Use ata_to_sense_error() to map status register bits
+ * onto sense key, asc & ascq.
+ */
+ if (qc->err_mask ||
+ tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ)) {
+ ata_to_sense_error(qc->ap->print_id, tf->command, tf->feature,
+ &sb[1], &sb[2], &sb[3], verbose);
+ sb[1] &= 0x0f;
+ }
+
+ block = ata_tf_read_block(&qc->result_tf, dev);
+
+ /* information sense data descriptor */
+ sb[7] = 12;
+ desc[0] = 0x00;
+ desc[1] = 10;
+
+ desc[2] |= 0x80; /* valid */
+ desc[6] = block >> 40;
+ desc[7] = block >> 32;
+ desc[8] = block >> 24;
+ desc[9] = block >> 16;
+ desc[10] = block >> 8;
+ desc[11] = block;
+}
+
+static void ata_scsi_sdev_config(struct scsi_device *sdev)
+{
+ sdev->use_10_for_rw = 1;
+ sdev->use_10_for_ms = 1;
+ sdev->no_report_opcodes = 1;
+ sdev->no_write_same = 1;
+
+ /* Schedule policy is determined by ->qc_defer() callback and
+ * it needs to see every deferred qc. Set dev_blocked to 1 to
+ * prevent SCSI midlayer from automatically deferring
+ * requests.
+ */
+ sdev->max_device_blocked = 1;
+}
+
+/**
+ * atapi_drain_needed - Check whether data transfer may overflow
+ * @rq: request to be checked
+ *
+ * ATAPI commands which transfer variable length data to host
+ * might overflow due to application error or hardare bug. This
+ * function checks whether overflow should be drained and ignored
+ * for @request.
+ *
+ * LOCKING:
+ * None.
+ *
+ * RETURNS:
+ * 1 if ; otherwise, 0.
+ */
+static int atapi_drain_needed(struct request *rq)
+{
+ if (likely(rq->cmd_type != REQ_TYPE_BLOCK_PC))
+ return 0;
+
+ if (!blk_rq_bytes(rq) || (rq->cmd_flags & REQ_WRITE))
+ return 0;
+
+ return atapi_cmd_type(rq->cmd[0]) == ATAPI_MISC;
+}
+
+static int ata_scsi_dev_config(struct scsi_device *sdev,
+ struct ata_device *dev)
+{
+ struct request_queue *q = sdev->request_queue;
+
+ if (!ata_id_has_unload(dev->id))
+ dev->flags |= ATA_DFLAG_NO_UNLOAD;
+
+ /* configure max sectors */
+ blk_queue_max_hw_sectors(q, dev->max_sectors);
+
+ if (dev->class == ATA_DEV_ATAPI) {
+ void *buf;
+
+ sdev->sector_size = ATA_SECT_SIZE;
+
+ /* set DMA padding */
+ blk_queue_update_dma_pad(q, ATA_DMA_PAD_SZ - 1);
+
+ /* configure draining */
+ buf = kmalloc(ATAPI_MAX_DRAIN, q->bounce_gfp | GFP_KERNEL);
+ if (!buf) {
+ ata_dev_err(dev, "drain buffer allocation failed\n");
+ return -ENOMEM;
+ }
+
+ blk_queue_dma_drain(q, atapi_drain_needed, buf, ATAPI_MAX_DRAIN);
+ } else {
+ sdev->sector_size = ata_id_logical_sector_size(dev->id);
+ sdev->manage_start_stop = 1;
+ }
+
+ /*
+ * ata_pio_sectors() expects buffer for each sector to not cross
+ * page boundary. Enforce it by requiring buffers to be sector
+ * aligned, which works iff sector_size is not larger than
+ * PAGE_SIZE. ATAPI devices also need the alignment as
+ * IDENTIFY_PACKET is executed as ATA_PROT_PIO.
+ */
+ if (sdev->sector_size > PAGE_SIZE)
+ ata_dev_warn(dev,
+ "sector_size=%u > PAGE_SIZE, PIO may malfunction\n",
+ sdev->sector_size);
+
+ blk_queue_update_dma_alignment(q, sdev->sector_size - 1);
+
+ if (dev->flags & ATA_DFLAG_AN)
+ set_bit(SDEV_EVT_MEDIA_CHANGE, sdev->supported_events);
+
+ if (dev->flags & ATA_DFLAG_NCQ) {
+ int depth;
+
+ depth = min(sdev->host->can_queue, ata_id_queue_depth(dev->id));
+ depth = min(ATA_MAX_QUEUE - 1, depth);
+ scsi_change_queue_depth(sdev, depth);
+ }
+
+ blk_queue_flush_queueable(q, false);
+
+ dev->sdev = sdev;
+ return 0;
+}
+
+/**
+ * ata_scsi_slave_config - Set SCSI device attributes
+ * @sdev: SCSI device to examine
+ *
+ * This is called before we actually start reading
+ * and writing to the device, to configure certain
+ * SCSI mid-layer behaviors.
+ *
+ * LOCKING:
+ * Defined by SCSI layer. We don't really care.
+ */
+
+int ata_scsi_slave_config(struct scsi_device *sdev)
+{
+ struct ata_port *ap = ata_shost_to_port(sdev->host);
+ struct ata_device *dev = __ata_scsi_find_dev(ap, sdev);
+ int rc = 0;
+
+ ata_scsi_sdev_config(sdev);
+
+ if (dev)
+ rc = ata_scsi_dev_config(sdev, dev);
+
+ return rc;
+}
+
+/**
+ * ata_scsi_slave_destroy - SCSI device is about to be destroyed
+ * @sdev: SCSI device to be destroyed
+ *
+ * @sdev is about to be destroyed for hot/warm unplugging. If
+ * this unplugging was initiated by libata as indicated by NULL
+ * dev->sdev, this function doesn't have to do anything.
+ * Otherwise, SCSI layer initiated warm-unplug is in progress.
+ * Clear dev->sdev, schedule the device for ATA detach and invoke
+ * EH.
+ *
+ * LOCKING:
+ * Defined by SCSI layer. We don't really care.
+ */
+void ata_scsi_slave_destroy(struct scsi_device *sdev)
+{
+ struct ata_port *ap = ata_shost_to_port(sdev->host);
+ struct request_queue *q = sdev->request_queue;
+ unsigned long flags;
+ struct ata_device *dev;
+
+ if (!ap->ops->error_handler)
+ return;
+
+ spin_lock_irqsave(ap->lock, flags);
+ dev = __ata_scsi_find_dev(ap, sdev);
+ if (dev && dev->sdev) {
+ /* SCSI device already in CANCEL state, no need to offline it */
+ dev->sdev = NULL;
+ dev->flags |= ATA_DFLAG_DETACH;
+ ata_port_schedule_eh(ap);
+ }
+ spin_unlock_irqrestore(ap->lock, flags);
+
+ kfree(q->dma_drain_buffer);
+ q->dma_drain_buffer = NULL;
+ q->dma_drain_size = 0;
+}
+
+/**
+ * __ata_change_queue_depth - helper for ata_scsi_change_queue_depth
+ * @ap: ATA port to which the device change the queue depth
+ * @sdev: SCSI device to configure queue depth for
+ * @queue_depth: new queue depth
+ *
+ * libsas and libata have different approaches for associating a sdev to
+ * its ata_port.
+ *
+ */
+int __ata_change_queue_depth(struct ata_port *ap, struct scsi_device *sdev,
+ int queue_depth)
+{
+ struct ata_device *dev;
+ unsigned long flags;
+
+ if (queue_depth < 1 || queue_depth == sdev->queue_depth)
+ return sdev->queue_depth;
+
+ dev = ata_scsi_find_dev(ap, sdev);
+ if (!dev || !ata_dev_enabled(dev))
+ return sdev->queue_depth;
+
+ /* NCQ enabled? */
+ spin_lock_irqsave(ap->lock, flags);
+ dev->flags &= ~ATA_DFLAG_NCQ_OFF;
+ if (queue_depth == 1 || !ata_ncq_enabled(dev)) {
+ dev->flags |= ATA_DFLAG_NCQ_OFF;
+ queue_depth = 1;
+ }
+ spin_unlock_irqrestore(ap->lock, flags);
+
+ /* limit and apply queue depth */
+ queue_depth = min(queue_depth, sdev->host->can_queue);
+ queue_depth = min(queue_depth, ata_id_queue_depth(dev->id));
+ queue_depth = min(queue_depth, ATA_MAX_QUEUE - 1);
+
+ if (sdev->queue_depth == queue_depth)
+ return -EINVAL;
+
+ return scsi_change_queue_depth(sdev, queue_depth);
+}
+
+/**
+ * ata_scsi_change_queue_depth - SCSI callback for queue depth config
+ * @sdev: SCSI device to configure queue depth for
+ * @queue_depth: new queue depth
+ *
+ * This is libata standard hostt->change_queue_depth callback.
+ * SCSI will call into this callback when user tries to set queue
+ * depth via sysfs.
+ *
+ * LOCKING:
+ * SCSI layer (we don't care)
+ *
+ * RETURNS:
+ * Newly configured queue depth.
+ */
+int ata_scsi_change_queue_depth(struct scsi_device *sdev, int queue_depth)
+{
+ struct ata_port *ap = ata_shost_to_port(sdev->host);
+
+ return __ata_change_queue_depth(ap, sdev, queue_depth);
+}
+
+/**
+ * ata_scsi_start_stop_xlat - Translate SCSI START STOP UNIT command
+ * @qc: Storage for translated ATA taskfile
+ *
+ * Sets up an ATA taskfile to issue STANDBY (to stop) or READ VERIFY
+ * (to start). Perhaps these commands should be preceded by
+ * CHECK POWER MODE to see what power mode the device is already in.
+ * [See SAT revision 5 at www.t10.org]
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ *
+ * RETURNS:
+ * Zero on success, non-zero on error.
+ */
+static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc)
+{
+ struct scsi_cmnd *scmd = qc->scsicmd;
+ struct ata_taskfile *tf = &qc->tf;
+ const u8 *cdb = scmd->cmnd;
+
+ if (scmd->cmd_len < 5)
+ goto invalid_fld;
+
+ tf->flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR;
+ tf->protocol = ATA_PROT_NODATA;
+ if (cdb[1] & 0x1) {
+ ; /* ignore IMMED bit, violates sat-r05 */
+ }
+ if (cdb[4] & 0x2)
+ goto invalid_fld; /* LOEJ bit set not supported */
+ if (((cdb[4] >> 4) & 0xf) != 0)
+ goto invalid_fld; /* power conditions not supported */
+
+ if (cdb[4] & 0x1) {
+ tf->nsect = 1; /* 1 sector, lba=0 */
+
+ if (qc->dev->flags & ATA_DFLAG_LBA) {
+ tf->flags |= ATA_TFLAG_LBA;
+
+ tf->lbah = 0x0;
+ tf->lbam = 0x0;
+ tf->lbal = 0x0;
+ tf->device |= ATA_LBA;
+ } else {
+ /* CHS */
+ tf->lbal = 0x1; /* sect */
+ tf->lbam = 0x0; /* cyl low */
+ tf->lbah = 0x0; /* cyl high */
+ }
+
+ tf->command = ATA_CMD_VERIFY; /* READ VERIFY */
+ } else {
+ /* Some odd clown BIOSen issue spindown on power off (ACPI S4
+ * or S5) causing some drives to spin up and down again.
+ */
+ if ((qc->ap->flags & ATA_FLAG_NO_POWEROFF_SPINDOWN) &&
+ system_state == SYSTEM_POWER_OFF)
+ goto skip;
+
+ if ((qc->ap->flags & ATA_FLAG_NO_HIBERNATE_SPINDOWN) &&
+ system_entering_hibernation())
+ goto skip;
+
+ /* Issue ATA STANDBY IMMEDIATE command */
+ tf->command = ATA_CMD_STANDBYNOW1;
+ }
+
+ /*
+ * Standby and Idle condition timers could be implemented but that
+ * would require libata to implement the Power condition mode page
+ * and allow the user to change it. Changing mode pages requires
+ * MODE SELECT to be implemented.
+ */
+
+ return 0;
+
+ invalid_fld:
+ ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x24, 0x0);
+ /* "Invalid field in cbd" */
+ return 1;
+ skip:
+ scmd->result = SAM_STAT_GOOD;
+ return 1;
+}
+
+
+/**
+ * ata_scsi_flush_xlat - Translate SCSI SYNCHRONIZE CACHE command
+ * @qc: Storage for translated ATA taskfile
+ *
+ * Sets up an ATA taskfile to issue FLUSH CACHE or
+ * FLUSH CACHE EXT.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ *
+ * RETURNS:
+ * Zero on success, non-zero on error.
+ */
+static unsigned int ata_scsi_flush_xlat(struct ata_queued_cmd *qc)
+{
+ struct ata_taskfile *tf = &qc->tf;
+
+ tf->flags |= ATA_TFLAG_DEVICE;
+ tf->protocol = ATA_PROT_NODATA;
+
+ if (qc->dev->flags & ATA_DFLAG_FLUSH_EXT)
+ tf->command = ATA_CMD_FLUSH_EXT;
+ else
+ tf->command = ATA_CMD_FLUSH;
+
+ /* flush is critical for IO integrity, consider it an IO command */
+ qc->flags |= ATA_QCFLAG_IO;
+
+ return 0;
+}
+
+/**
+ * scsi_6_lba_len - Get LBA and transfer length
+ * @cdb: SCSI command to translate
+ *
+ * Calculate LBA and transfer length for 6-byte commands.
+ *
+ * RETURNS:
+ * @plba: the LBA
+ * @plen: the transfer length
+ */
+static void scsi_6_lba_len(const u8 *cdb, u64 *plba, u32 *plen)
+{
+ u64 lba = 0;
+ u32 len;
+
+ VPRINTK("six-byte command\n");
+
+ lba |= ((u64)(cdb[1] & 0x1f)) << 16;
+ lba |= ((u64)cdb[2]) << 8;
+ lba |= ((u64)cdb[3]);
+
+ len = cdb[4];
+
+ *plba = lba;
+ *plen = len;
+}
+
+/**
+ * scsi_10_lba_len - Get LBA and transfer length
+ * @cdb: SCSI command to translate
+ *
+ * Calculate LBA and transfer length for 10-byte commands.
+ *
+ * RETURNS:
+ * @plba: the LBA
+ * @plen: the transfer length
+ */
+static void scsi_10_lba_len(const u8 *cdb, u64 *plba, u32 *plen)
+{
+ u64 lba = 0;
+ u32 len = 0;
+
+ VPRINTK("ten-byte command\n");
+
+ lba |= ((u64)cdb[2]) << 24;
+ lba |= ((u64)cdb[3]) << 16;
+ lba |= ((u64)cdb[4]) << 8;
+ lba |= ((u64)cdb[5]);
+
+ len |= ((u32)cdb[7]) << 8;
+ len |= ((u32)cdb[8]);
+
+ *plba = lba;
+ *plen = len;
+}
+
+/**
+ * scsi_16_lba_len - Get LBA and transfer length
+ * @cdb: SCSI command to translate
+ *
+ * Calculate LBA and transfer length for 16-byte commands.
+ *
+ * RETURNS:
+ * @plba: the LBA
+ * @plen: the transfer length
+ */
+static void scsi_16_lba_len(const u8 *cdb, u64 *plba, u32 *plen)
+{
+ u64 lba = 0;
+ u32 len = 0;
+
+ VPRINTK("sixteen-byte command\n");
+
+ lba |= ((u64)cdb[2]) << 56;
+ lba |= ((u64)cdb[3]) << 48;
+ lba |= ((u64)cdb[4]) << 40;
+ lba |= ((u64)cdb[5]) << 32;
+ lba |= ((u64)cdb[6]) << 24;
+ lba |= ((u64)cdb[7]) << 16;
+ lba |= ((u64)cdb[8]) << 8;
+ lba |= ((u64)cdb[9]);
+
+ len |= ((u32)cdb[10]) << 24;
+ len |= ((u32)cdb[11]) << 16;
+ len |= ((u32)cdb[12]) << 8;
+ len |= ((u32)cdb[13]);
+
+ *plba = lba;
+ *plen = len;
+}
+
+/**
+ * ata_scsi_verify_xlat - Translate SCSI VERIFY command into an ATA one
+ * @qc: Storage for translated ATA taskfile
+ *
+ * Converts SCSI VERIFY command to an ATA READ VERIFY command.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ *
+ * RETURNS:
+ * Zero on success, non-zero on error.
+ */
+static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc)
+{
+ struct scsi_cmnd *scmd = qc->scsicmd;
+ struct ata_taskfile *tf = &qc->tf;
+ struct ata_device *dev = qc->dev;
+ u64 dev_sectors = qc->dev->n_sectors;
+ const u8 *cdb = scmd->cmnd;
+ u64 block;
+ u32 n_block;
+
+ tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
+ tf->protocol = ATA_PROT_NODATA;
+
+ if (cdb[0] == VERIFY) {
+ if (scmd->cmd_len < 10)
+ goto invalid_fld;
+ scsi_10_lba_len(cdb, &block, &n_block);
+ } else if (cdb[0] == VERIFY_16) {
+ if (scmd->cmd_len < 16)
+ goto invalid_fld;
+ scsi_16_lba_len(cdb, &block, &n_block);
+ } else
+ goto invalid_fld;
+
+ if (!n_block)
+ goto nothing_to_do;
+ if (block >= dev_sectors)
+ goto out_of_range;
+ if ((block + n_block) > dev_sectors)
+ goto out_of_range;
+
+ if (dev->flags & ATA_DFLAG_LBA) {
+ tf->flags |= ATA_TFLAG_LBA;
+
+ if (lba_28_ok(block, n_block)) {
+ /* use LBA28 */
+ tf->command = ATA_CMD_VERIFY;
+ tf->device |= (block >> 24) & 0xf;
+ } else if (lba_48_ok(block, n_block)) {
+ if (!(dev->flags & ATA_DFLAG_LBA48))
+ goto out_of_range;
+
+ /* use LBA48 */
+ tf->flags |= ATA_TFLAG_LBA48;
+ tf->command = ATA_CMD_VERIFY_EXT;
+
+ tf->hob_nsect = (n_block >> 8) & 0xff;
+
+ tf->hob_lbah = (block >> 40) & 0xff;
+ tf->hob_lbam = (block >> 32) & 0xff;
+ tf->hob_lbal = (block >> 24) & 0xff;
+ } else
+ /* request too large even for LBA48 */
+ goto out_of_range;
+
+ tf->nsect = n_block & 0xff;
+
+ tf->lbah = (block >> 16) & 0xff;
+ tf->lbam = (block >> 8) & 0xff;
+ tf->lbal = block & 0xff;
+
+ tf->device |= ATA_LBA;
+ } else {
+ /* CHS */
+ u32 sect, head, cyl, track;
+
+ if (!lba_28_ok(block, n_block))
+ goto out_of_range;
+
+ /* Convert LBA to CHS */
+ track = (u32)block / dev->sectors;
+ cyl = track / dev->heads;
+ head = track % dev->heads;
+ sect = (u32)block % dev->sectors + 1;
+
+ DPRINTK("block %u track %u cyl %u head %u sect %u\n",
+ (u32)block, track, cyl, head, sect);
+
+ /* Check whether the converted CHS can fit.
+ Cylinder: 0-65535
+ Head: 0-15
+ Sector: 1-255*/
+ if ((cyl >> 16) || (head >> 4) || (sect >> 8) || (!sect))
+ goto out_of_range;
+
+ tf->command = ATA_CMD_VERIFY;
+ tf->nsect = n_block & 0xff; /* Sector count 0 means 256 sectors */
+ tf->lbal = sect;
+ tf->lbam = cyl;
+ tf->lbah = cyl >> 8;
+ tf->device |= head;
+ }
+
+ return 0;
+
+invalid_fld:
+ ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x24, 0x0);
+ /* "Invalid field in cbd" */
+ return 1;
+
+out_of_range:
+ ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x21, 0x0);
+ /* "Logical Block Address out of range" */
+ return 1;
+
+nothing_to_do:
+ scmd->result = SAM_STAT_GOOD;
+ return 1;
+}
+
+/**
+ * ata_scsi_rw_xlat - Translate SCSI r/w command into an ATA one
+ * @qc: Storage for translated ATA taskfile
+ *
+ * Converts any of six SCSI read/write commands into the
+ * ATA counterpart, including starting sector (LBA),
+ * sector count, and taking into account the device's LBA48
+ * support.
+ *
+ * Commands %READ_6, %READ_10, %READ_16, %WRITE_6, %WRITE_10, and
+ * %WRITE_16 are currently supported.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ *
+ * RETURNS:
+ * Zero on success, non-zero on error.
+ */
+static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc)
+{
+ struct scsi_cmnd *scmd = qc->scsicmd;
+ const u8 *cdb = scmd->cmnd;
+ unsigned int tf_flags = 0;
+ u64 block;
+ u32 n_block;
+ int rc;
+
+ if (cdb[0] == WRITE_10 || cdb[0] == WRITE_6 || cdb[0] == WRITE_16)
+ tf_flags |= ATA_TFLAG_WRITE;
+
+ /* Calculate the SCSI LBA, transfer length and FUA. */
+ switch (cdb[0]) {
+ case READ_10:
+ case WRITE_10:
+ if (unlikely(scmd->cmd_len < 10))
+ goto invalid_fld;
+ scsi_10_lba_len(cdb, &block, &n_block);
+ if (cdb[1] & (1 << 3))
+ tf_flags |= ATA_TFLAG_FUA;
+ break;
+ case READ_6:
+ case WRITE_6:
+ if (unlikely(scmd->cmd_len < 6))
+ goto invalid_fld;
+ scsi_6_lba_len(cdb, &block, &n_block);
+
+ /* for 6-byte r/w commands, transfer length 0
+ * means 256 blocks of data, not 0 block.
+ */
+ if (!n_block)
+ n_block = 256;
+ break;
+ case READ_16:
+ case WRITE_16:
+ if (unlikely(scmd->cmd_len < 16))
+ goto invalid_fld;
+ scsi_16_lba_len(cdb, &block, &n_block);
+ if (cdb[1] & (1 << 3))
+ tf_flags |= ATA_TFLAG_FUA;
+ break;
+ default:
+ DPRINTK("no-byte command\n");
+ goto invalid_fld;
+ }
+
+ /* Check and compose ATA command */
+ if (!n_block)
+ /* For 10-byte and 16-byte SCSI R/W commands, transfer
+ * length 0 means transfer 0 block of data.
+ * However, for ATA R/W commands, sector count 0 means
+ * 256 or 65536 sectors, not 0 sectors as in SCSI.
+ *
+ * WARNING: one or two older ATA drives treat 0 as 0...
+ */
+ goto nothing_to_do;
+
+ qc->flags |= ATA_QCFLAG_IO;
+ qc->nbytes = n_block * scmd->device->sector_size;
+
+ rc = ata_build_rw_tf(&qc->tf, qc->dev, block, n_block, tf_flags,
+ qc->tag);
+ if (likely(rc == 0))
+ return 0;
+
+ if (rc == -ERANGE)
+ goto out_of_range;
+ /* treat all other errors as -EINVAL, fall through */
+invalid_fld:
+ ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x24, 0x0);
+ /* "Invalid field in cbd" */
+ return 1;
+
+out_of_range:
+ ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x21, 0x0);
+ /* "Logical Block Address out of range" */
+ return 1;
+
+nothing_to_do:
+ scmd->result = SAM_STAT_GOOD;
+ return 1;
+}
+
+static void ata_scsi_qc_complete(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct scsi_cmnd *cmd = qc->scsicmd;
+ u8 *cdb = cmd->cmnd;
+ int need_sense = (qc->err_mask != 0);
+
+ /* For ATA pass thru (SAT) commands, generate a sense block if
+ * user mandated it or if there's an error. Note that if we
+ * generate because the user forced us to [CK_COND =1], a check
+ * condition is generated and the ATA register values are returned
+ * whether the command completed successfully or not. If there
+ * was no error, we use the following sense data:
+ * sk = RECOVERED ERROR
+ * asc,ascq = ATA PASS-THROUGH INFORMATION AVAILABLE
+ */
+ if (((cdb[0] == ATA_16) || (cdb[0] == ATA_12)) &&
+ ((cdb[2] & 0x20) || need_sense)) {
+ ata_gen_passthru_sense(qc);
+ } else {
+ if (qc->flags & ATA_QCFLAG_SENSE_VALID) {
+ cmd->result = SAM_STAT_CHECK_CONDITION;
+ } else if (!need_sense) {
+ cmd->result = SAM_STAT_GOOD;
+ } else {
+ /* TODO: decide which descriptor format to use
+ * for 48b LBA devices and call that here
+ * instead of the fixed desc, which is only
+ * good for smaller LBA (and maybe CHS?)
+ * devices.
+ */
+ ata_gen_ata_sense(qc);
+ }
+ }
+
+ if (need_sense && !ap->ops->error_handler)
+ ata_dump_status(ap->print_id, &qc->result_tf);
+
+ qc->scsidone(cmd);
+
+ ata_qc_free(qc);
+}
+
+/**
+ * ata_scsi_translate - Translate then issue SCSI command to ATA device
+ * @dev: ATA device to which the command is addressed
+ * @cmd: SCSI command to execute
+ * @xlat_func: Actor which translates @cmd to an ATA taskfile
+ *
+ * Our ->queuecommand() function has decided that the SCSI
+ * command issued can be directly translated into an ATA
+ * command, rather than handled internally.
+ *
+ * This function sets up an ata_queued_cmd structure for the
+ * SCSI command, and sends that ata_queued_cmd to the hardware.
+ *
+ * The xlat_func argument (actor) returns 0 if ready to execute
+ * ATA command, else 1 to finish translation. If 1 is returned
+ * then cmd->result (and possibly cmd->sense_buffer) are assumed
+ * to be set reflecting an error condition or clean (early)
+ * termination.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ *
+ * RETURNS:
+ * 0 on success, SCSI_ML_QUEUE_DEVICE_BUSY if the command
+ * needs to be deferred.
+ */
+static int ata_scsi_translate(struct ata_device *dev, struct scsi_cmnd *cmd,
+ ata_xlat_func_t xlat_func)
+{
+ struct ata_port *ap = dev->link->ap;
+ struct ata_queued_cmd *qc;
+ int rc;
+
+ VPRINTK("ENTER\n");
+
+ qc = ata_scsi_qc_new(dev, cmd);
+ if (!qc)
+ goto err_mem;
+
+ /* data is present; dma-map it */
+ if (cmd->sc_data_direction == DMA_FROM_DEVICE ||
+ cmd->sc_data_direction == DMA_TO_DEVICE) {
+ if (unlikely(scsi_bufflen(cmd) < 1)) {
+ ata_dev_warn(dev, "WARNING: zero len r/w req\n");
+ goto err_did;
+ }
+
+ ata_sg_init(qc, scsi_sglist(cmd), scsi_sg_count(cmd));
+
+ qc->dma_dir = cmd->sc_data_direction;
+ }
+
+ qc->complete_fn = ata_scsi_qc_complete;
+
+ if (xlat_func(qc))
+ goto early_finish;
+
+ if (ap->ops->qc_defer) {
+ if ((rc = ap->ops->qc_defer(qc)))
+ goto defer;
+ }
+
+ /* select device, send command to hardware */
+ ata_qc_issue(qc);
+
+ VPRINTK("EXIT\n");
+ return 0;
+
+early_finish:
+ ata_qc_free(qc);
+ cmd->scsi_done(cmd);
+ DPRINTK("EXIT - early finish (good or error)\n");
+ return 0;
+
+err_did:
+ ata_qc_free(qc);
+ cmd->result = (DID_ERROR << 16);
+ cmd->scsi_done(cmd);
+err_mem:
+ DPRINTK("EXIT - internal\n");
+ return 0;
+
+defer:
+ ata_qc_free(qc);
+ DPRINTK("EXIT - defer\n");
+ if (rc == ATA_DEFER_LINK)
+ return SCSI_MLQUEUE_DEVICE_BUSY;
+ else
+ return SCSI_MLQUEUE_HOST_BUSY;
+}
+
+/**
+ * ata_scsi_rbuf_get - Map response buffer.
+ * @cmd: SCSI command containing buffer to be mapped.
+ * @flags: unsigned long variable to store irq enable status
+ * @copy_in: copy in from user buffer
+ *
+ * Prepare buffer for simulated SCSI commands.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(ata_scsi_rbuf_lock) on success
+ *
+ * RETURNS:
+ * Pointer to response buffer.
+ */
+static void *ata_scsi_rbuf_get(struct scsi_cmnd *cmd, bool copy_in,
+ unsigned long *flags)
+{
+ spin_lock_irqsave(&ata_scsi_rbuf_lock, *flags);
+
+ memset(ata_scsi_rbuf, 0, ATA_SCSI_RBUF_SIZE);
+ if (copy_in)
+ sg_copy_to_buffer(scsi_sglist(cmd), scsi_sg_count(cmd),
+ ata_scsi_rbuf, ATA_SCSI_RBUF_SIZE);
+ return ata_scsi_rbuf;
+}
+
+/**
+ * ata_scsi_rbuf_put - Unmap response buffer.
+ * @cmd: SCSI command containing buffer to be unmapped.
+ * @copy_out: copy out result
+ * @flags: @flags passed to ata_scsi_rbuf_get()
+ *
+ * Returns rbuf buffer. The result is copied to @cmd's buffer if
+ * @copy_back is true.
+ *
+ * LOCKING:
+ * Unlocks ata_scsi_rbuf_lock.
+ */
+static inline void ata_scsi_rbuf_put(struct scsi_cmnd *cmd, bool copy_out,
+ unsigned long *flags)
+{
+ if (copy_out)
+ sg_copy_from_buffer(scsi_sglist(cmd), scsi_sg_count(cmd),
+ ata_scsi_rbuf, ATA_SCSI_RBUF_SIZE);
+ spin_unlock_irqrestore(&ata_scsi_rbuf_lock, *flags);
+}
+
+/**
+ * ata_scsi_rbuf_fill - wrapper for SCSI command simulators
+ * @args: device IDENTIFY data / SCSI command of interest.
+ * @actor: Callback hook for desired SCSI command simulator
+ *
+ * Takes care of the hard work of simulating a SCSI command...
+ * Mapping the response buffer, calling the command's handler,
+ * and handling the handler's return value. This return value
+ * indicates whether the handler wishes the SCSI command to be
+ * completed successfully (0), or not (in which case cmd->result
+ * and sense buffer are assumed to be set).
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ */
+static void ata_scsi_rbuf_fill(struct ata_scsi_args *args,
+ unsigned int (*actor)(struct ata_scsi_args *args, u8 *rbuf))
+{
+ u8 *rbuf;
+ unsigned int rc;
+ struct scsi_cmnd *cmd = args->cmd;
+ unsigned long flags;
+
+ rbuf = ata_scsi_rbuf_get(cmd, false, &flags);
+ rc = actor(args, rbuf);
+ ata_scsi_rbuf_put(cmd, rc == 0, &flags);
+
+ if (rc == 0)
+ cmd->result = SAM_STAT_GOOD;
+ args->done(cmd);
+}
+
+/**
+ * ata_scsiop_inq_std - Simulate INQUIRY command
+ * @args: device IDENTIFY data / SCSI command of interest.
+ * @rbuf: Response buffer, to which simulated SCSI cmd output is sent.
+ *
+ * Returns standard device identification data associated
+ * with non-VPD INQUIRY command output.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ */
+static unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf)
+{
+ const u8 versions[] = {
+ 0x00,
+ 0x60, /* SAM-3 (no version claimed) */
+
+ 0x03,
+ 0x20, /* SBC-2 (no version claimed) */
+
+ 0x02,
+ 0x60 /* SPC-3 (no version claimed) */
+ };
+ const u8 versions_zbc[] = {
+ 0x00,
+ 0xA0, /* SAM-5 (no version claimed) */
+
+ 0x04,
+ 0xC0, /* SBC-3 (no version claimed) */
+
+ 0x04,
+ 0x60, /* SPC-4 (no version claimed) */
+
+ 0x60,
+ 0x20, /* ZBC (no version claimed) */
+ };
+
+ u8 hdr[] = {
+ TYPE_DISK,
+ 0,
+ 0x5, /* claim SPC-3 version compatibility */
+ 2,
+ 95 - 4
+ };
+
+ VPRINTK("ENTER\n");
+
+ /* set scsi removable (RMB) bit per ata bit */
+ if (ata_id_removable(args->id))
+ hdr[1] |= (1 << 7);
+
+ if (args->dev->class == ATA_DEV_ZAC) {
+ hdr[0] = TYPE_ZBC;
+ hdr[2] = 0x6; /* ZBC is defined in SPC-4 */
+ }
+
+ memcpy(rbuf, hdr, sizeof(hdr));
+ memcpy(&rbuf[8], "ATA ", 8);
+ ata_id_string(args->id, &rbuf[16], ATA_ID_PROD, 16);
+
+ /* From SAT, use last 2 words from fw rev unless they are spaces */
+ ata_id_string(args->id, &rbuf[32], ATA_ID_FW_REV + 2, 4);
+ if (strncmp(&rbuf[32], " ", 4) == 0)
+ ata_id_string(args->id, &rbuf[32], ATA_ID_FW_REV, 4);
+
+ if (rbuf[32] == 0 || rbuf[32] == ' ')
+ memcpy(&rbuf[32], "n/a ", 4);
+
+ if (args->dev->class == ATA_DEV_ZAC)
+ memcpy(rbuf + 58, versions_zbc, sizeof(versions_zbc));
+ else
+ memcpy(rbuf + 58, versions, sizeof(versions));
+
+ return 0;
+}
+
+/**
+ * ata_scsiop_inq_00 - Simulate INQUIRY VPD page 0, list of pages
+ * @args: device IDENTIFY data / SCSI command of interest.
+ * @rbuf: Response buffer, to which simulated SCSI cmd output is sent.
+ *
+ * Returns list of inquiry VPD pages available.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ */
+static unsigned int ata_scsiop_inq_00(struct ata_scsi_args *args, u8 *rbuf)
+{
+ const u8 pages[] = {
+ 0x00, /* page 0x00, this page */
+ 0x80, /* page 0x80, unit serial no page */
+ 0x83, /* page 0x83, device ident page */
+ 0x89, /* page 0x89, ata info page */
+ 0xb0, /* page 0xb0, block limits page */
+ 0xb1, /* page 0xb1, block device characteristics page */
+ 0xb2, /* page 0xb2, thin provisioning page */
+ };
+
+ rbuf[3] = sizeof(pages); /* number of supported VPD pages */
+ memcpy(rbuf + 4, pages, sizeof(pages));
+ return 0;
+}
+
+/**
+ * ata_scsiop_inq_80 - Simulate INQUIRY VPD page 80, device serial number
+ * @args: device IDENTIFY data / SCSI command of interest.
+ * @rbuf: Response buffer, to which simulated SCSI cmd output is sent.
+ *
+ * Returns ATA device serial number.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ */
+static unsigned int ata_scsiop_inq_80(struct ata_scsi_args *args, u8 *rbuf)
+{
+ const u8 hdr[] = {
+ 0,
+ 0x80, /* this page code */
+ 0,
+ ATA_ID_SERNO_LEN, /* page len */
+ };
+
+ memcpy(rbuf, hdr, sizeof(hdr));
+ ata_id_string(args->id, (unsigned char *) &rbuf[4],
+ ATA_ID_SERNO, ATA_ID_SERNO_LEN);
+ return 0;
+}
+
+/**
+ * ata_scsiop_inq_83 - Simulate INQUIRY VPD page 83, device identity
+ * @args: device IDENTIFY data / SCSI command of interest.
+ * @rbuf: Response buffer, to which simulated SCSI cmd output is sent.
+ *
+ * Yields two logical unit device identification designators:
+ * - vendor specific ASCII containing the ATA serial number
+ * - SAT defined "t10 vendor id based" containing ASCII vendor
+ * name ("ATA "), model and serial numbers.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ */
+static unsigned int ata_scsiop_inq_83(struct ata_scsi_args *args, u8 *rbuf)
+{
+ const int sat_model_serial_desc_len = 68;
+ int num;
+
+ rbuf[1] = 0x83; /* this page code */
+ num = 4;
+
+ /* piv=0, assoc=lu, code_set=ACSII, designator=vendor */
+ rbuf[num + 0] = 2;
+ rbuf[num + 3] = ATA_ID_SERNO_LEN;
+ num += 4;
+ ata_id_string(args->id, (unsigned char *) rbuf + num,
+ ATA_ID_SERNO, ATA_ID_SERNO_LEN);
+ num += ATA_ID_SERNO_LEN;
+
+ /* SAT defined lu model and serial numbers descriptor */
+ /* piv=0, assoc=lu, code_set=ACSII, designator=t10 vendor id */
+ rbuf[num + 0] = 2;
+ rbuf[num + 1] = 1;
+ rbuf[num + 3] = sat_model_serial_desc_len;
+ num += 4;
+ memcpy(rbuf + num, "ATA ", 8);
+ num += 8;
+ ata_id_string(args->id, (unsigned char *) rbuf + num, ATA_ID_PROD,
+ ATA_ID_PROD_LEN);
+ num += ATA_ID_PROD_LEN;
+ ata_id_string(args->id, (unsigned char *) rbuf + num, ATA_ID_SERNO,
+ ATA_ID_SERNO_LEN);
+ num += ATA_ID_SERNO_LEN;
+
+ if (ata_id_has_wwn(args->id)) {
+ /* SAT defined lu world wide name */
+ /* piv=0, assoc=lu, code_set=binary, designator=NAA */
+ rbuf[num + 0] = 1;
+ rbuf[num + 1] = 3;
+ rbuf[num + 3] = ATA_ID_WWN_LEN;
+ num += 4;
+ ata_id_string(args->id, (unsigned char *) rbuf + num,
+ ATA_ID_WWN, ATA_ID_WWN_LEN);
+ num += ATA_ID_WWN_LEN;
+ }
+ rbuf[3] = num - 4; /* page len (assume less than 256 bytes) */
+ return 0;
+}
+
+/**
+ * ata_scsiop_inq_89 - Simulate INQUIRY VPD page 89, ATA info
+ * @args: device IDENTIFY data / SCSI command of interest.
+ * @rbuf: Response buffer, to which simulated SCSI cmd output is sent.
+ *
+ * Yields SAT-specified ATA VPD page.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ */
+static unsigned int ata_scsiop_inq_89(struct ata_scsi_args *args, u8 *rbuf)
+{
+ struct ata_taskfile tf;
+
+ memset(&tf, 0, sizeof(tf));
+
+ rbuf[1] = 0x89; /* our page code */
+ rbuf[2] = (0x238 >> 8); /* page size fixed at 238h */
+ rbuf[3] = (0x238 & 0xff);
+
+ memcpy(&rbuf[8], "linux ", 8);
+ memcpy(&rbuf[16], "libata ", 16);
+ memcpy(&rbuf[32], DRV_VERSION, 4);
+
+ /* we don't store the ATA device signature, so we fake it */
+
+ tf.command = ATA_DRDY; /* really, this is Status reg */
+ tf.lbal = 0x1;
+ tf.nsect = 0x1;
+
+ ata_tf_to_fis(&tf, 0, 1, &rbuf[36]); /* TODO: PMP? */
+ rbuf[36] = 0x34; /* force D2H Reg FIS (34h) */
+
+ rbuf[56] = ATA_CMD_ID_ATA;
+
+ memcpy(&rbuf[60], &args->id[0], 512);
+ return 0;
+}
+
+static unsigned int ata_scsiop_inq_b0(struct ata_scsi_args *args, u8 *rbuf)
+{
+ u16 min_io_sectors;
+
+ rbuf[1] = 0xb0;
+ rbuf[3] = 0x3c; /* required VPD size with unmap support */
+
+ /*
+ * Optimal transfer length granularity.
+ *
+ * This is always one physical block, but for disks with a smaller
+ * logical than physical sector size we need to figure out what the
+ * latter is.
+ */
+ min_io_sectors = 1 << ata_id_log2_per_physical_sector(args->id);
+ put_unaligned_be16(min_io_sectors, &rbuf[6]);
+
+ /*
+ * Optimal unmap granularity.
+ *
+ * The ATA spec doesn't even know about a granularity or alignment
+ * for the TRIM command. We can leave away most of the unmap related
+ * VPD page entries, but we have specifify a granularity to signal
+ * that we support some form of unmap - in thise case via WRITE SAME
+ * with the unmap bit set.
+ */
+ if (ata_id_has_trim(args->id)) {
+ put_unaligned_be64(65535 * 512 / 8, &rbuf[36]);
+ put_unaligned_be32(1, &rbuf[28]);
+ }
+
+ return 0;
+}
+
+static unsigned int ata_scsiop_inq_b1(struct ata_scsi_args *args, u8 *rbuf)
+{
+ int form_factor = ata_id_form_factor(args->id);
+ int media_rotation_rate = ata_id_rotation_rate(args->id);
+
+ rbuf[1] = 0xb1;
+ rbuf[3] = 0x3c;
+ rbuf[4] = media_rotation_rate >> 8;
+ rbuf[5] = media_rotation_rate;
+ rbuf[7] = form_factor;
+
+ return 0;
+}
+
+static unsigned int ata_scsiop_inq_b2(struct ata_scsi_args *args, u8 *rbuf)
+{
+ /* SCSI Thin Provisioning VPD page: SBC-3 rev 22 or later */
+ rbuf[1] = 0xb2;
+ rbuf[3] = 0x4;
+ rbuf[5] = 1 << 6; /* TPWS */
+
+ return 0;
+}
+
+/**
+ * ata_scsiop_noop - Command handler that simply returns success.
+ * @args: device IDENTIFY data / SCSI command of interest.
+ * @rbuf: Response buffer, to which simulated SCSI cmd output is sent.
+ *
+ * No operation. Simply returns success to caller, to indicate
+ * that the caller should successfully complete this SCSI command.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ */
+static unsigned int ata_scsiop_noop(struct ata_scsi_args *args, u8 *rbuf)
+{
+ VPRINTK("ENTER\n");
+ return 0;
+}
+
+/**
+ * modecpy - Prepare response for MODE SENSE
+ * @dest: output buffer
+ * @src: data being copied
+ * @n: length of mode page
+ * @changeable: whether changeable parameters are requested
+ *
+ * Generate a generic MODE SENSE page for either current or changeable
+ * parameters.
+ *
+ * LOCKING:
+ * None.
+ */
+static void modecpy(u8 *dest, const u8 *src, int n, bool changeable)
+{
+ if (changeable) {
+ memcpy(dest, src, 2);
+ memset(dest + 2, 0, n - 2);
+ } else {
+ memcpy(dest, src, n);
+ }
+}
+
+/**
+ * ata_msense_caching - Simulate MODE SENSE caching info page
+ * @id: device IDENTIFY data
+ * @buf: output buffer
+ * @changeable: whether changeable parameters are requested
+ *
+ * Generate a caching info page, which conditionally indicates
+ * write caching to the SCSI layer, depending on device
+ * capabilities.
+ *
+ * LOCKING:
+ * None.
+ */
+static unsigned int ata_msense_caching(u16 *id, u8 *buf, bool changeable)
+{
+ modecpy(buf, def_cache_mpage, sizeof(def_cache_mpage), changeable);
+ if (changeable || ata_id_wcache_enabled(id))
+ buf[2] |= (1 << 2); /* write cache enable */
+ if (!changeable && !ata_id_rahead_enabled(id))
+ buf[12] |= (1 << 5); /* disable read ahead */
+ return sizeof(def_cache_mpage);
+}
+
+/**
+ * ata_msense_ctl_mode - Simulate MODE SENSE control mode page
+ * @buf: output buffer
+ * @changeable: whether changeable parameters are requested
+ *
+ * Generate a generic MODE SENSE control mode page.
+ *
+ * LOCKING:
+ * None.
+ */
+static unsigned int ata_msense_ctl_mode(u8 *buf, bool changeable)
+{
+ modecpy(buf, def_control_mpage, sizeof(def_control_mpage), changeable);
+ return sizeof(def_control_mpage);
+}
+
+/**
+ * ata_msense_rw_recovery - Simulate MODE SENSE r/w error recovery page
+ * @buf: output buffer
+ * @changeable: whether changeable parameters are requested
+ *
+ * Generate a generic MODE SENSE r/w error recovery page.
+ *
+ * LOCKING:
+ * None.
+ */
+static unsigned int ata_msense_rw_recovery(u8 *buf, bool changeable)
+{
+ modecpy(buf, def_rw_recovery_mpage, sizeof(def_rw_recovery_mpage),
+ changeable);
+ return sizeof(def_rw_recovery_mpage);
+}
+
+/*
+ * We can turn this into a real blacklist if it's needed, for now just
+ * blacklist any Maxtor BANC1G10 revision firmware
+ */
+static int ata_dev_supports_fua(u16 *id)
+{
+ unsigned char model[ATA_ID_PROD_LEN + 1], fw[ATA_ID_FW_REV_LEN + 1];
+
+ if (!libata_fua)
+ return 0;
+ if (!ata_id_has_fua(id))
+ return 0;
+
+ ata_id_c_string(id, model, ATA_ID_PROD, sizeof(model));
+ ata_id_c_string(id, fw, ATA_ID_FW_REV, sizeof(fw));
+
+ if (strcmp(model, "Maxtor"))
+ return 1;
+ if (strcmp(fw, "BANC1G10"))
+ return 1;
+
+ return 0; /* blacklisted */
+}
+
+/**
+ * ata_scsiop_mode_sense - Simulate MODE SENSE 6, 10 commands
+ * @args: device IDENTIFY data / SCSI command of interest.
+ * @rbuf: Response buffer, to which simulated SCSI cmd output is sent.
+ *
+ * Simulate MODE SENSE commands. Assume this is invoked for direct
+ * access devices (e.g. disks) only. There should be no block
+ * descriptor for other device types.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ */
+static unsigned int ata_scsiop_mode_sense(struct ata_scsi_args *args, u8 *rbuf)
+{
+ struct ata_device *dev = args->dev;
+ u8 *scsicmd = args->cmd->cmnd, *p = rbuf;
+ const u8 sat_blk_desc[] = {
+ 0, 0, 0, 0, /* number of blocks: sat unspecified */
+ 0,
+ 0, 0x2, 0x0 /* block length: 512 bytes */
+ };
+ u8 pg, spg;
+ unsigned int ebd, page_control, six_byte;
+ u8 dpofua;
+
+ VPRINTK("ENTER\n");
+
+ six_byte = (scsicmd[0] == MODE_SENSE);
+ ebd = !(scsicmd[1] & 0x8); /* dbd bit inverted == edb */
+ /*
+ * LLBA bit in msense(10) ignored (compliant)
+ */
+
+ page_control = scsicmd[2] >> 6;
+ switch (page_control) {
+ case 0: /* current */
+ case 1: /* changeable */
+ case 2: /* defaults */
+ break; /* supported */
+ case 3: /* saved */
+ goto saving_not_supp;
+ default:
+ goto invalid_fld;
+ }
+
+ if (six_byte)
+ p += 4 + (ebd ? 8 : 0);
+ else
+ p += 8 + (ebd ? 8 : 0);
+
+ pg = scsicmd[2] & 0x3f;
+ spg = scsicmd[3];
+ /*
+ * No mode subpages supported (yet) but asking for _all_
+ * subpages may be valid
+ */
+ if (spg && (spg != ALL_SUB_MPAGES))
+ goto invalid_fld;
+
+ switch(pg) {
+ case RW_RECOVERY_MPAGE:
+ p += ata_msense_rw_recovery(p, page_control == 1);
+ break;
+
+ case CACHE_MPAGE:
+ p += ata_msense_caching(args->id, p, page_control == 1);
+ break;
+
+ case CONTROL_MPAGE:
+ p += ata_msense_ctl_mode(p, page_control == 1);
+ break;
+
+ case ALL_MPAGES:
+ p += ata_msense_rw_recovery(p, page_control == 1);
+ p += ata_msense_caching(args->id, p, page_control == 1);
+ p += ata_msense_ctl_mode(p, page_control == 1);
+ break;
+
+ default: /* invalid page code */
+ goto invalid_fld;
+ }
+
+ dpofua = 0;
+ if (ata_dev_supports_fua(args->id) && (dev->flags & ATA_DFLAG_LBA48) &&
+ (!(dev->flags & ATA_DFLAG_PIO) || dev->multi_count))
+ dpofua = 1 << 4;
+
+ if (six_byte) {
+ rbuf[0] = p - rbuf - 1;
+ rbuf[2] |= dpofua;
+ if (ebd) {
+ rbuf[3] = sizeof(sat_blk_desc);
+ memcpy(rbuf + 4, sat_blk_desc, sizeof(sat_blk_desc));
+ }
+ } else {
+ unsigned int output_len = p - rbuf - 2;
+
+ rbuf[0] = output_len >> 8;
+ rbuf[1] = output_len;
+ rbuf[3] |= dpofua;
+ if (ebd) {
+ rbuf[7] = sizeof(sat_blk_desc);
+ memcpy(rbuf + 8, sat_blk_desc, sizeof(sat_blk_desc));
+ }
+ }
+ return 0;
+
+invalid_fld:
+ ata_scsi_set_sense(args->cmd, ILLEGAL_REQUEST, 0x24, 0x0);
+ /* "Invalid field in cbd" */
+ return 1;
+
+saving_not_supp:
+ ata_scsi_set_sense(args->cmd, ILLEGAL_REQUEST, 0x39, 0x0);
+ /* "Saving parameters not supported" */
+ return 1;
+}
+
+/**
+ * ata_scsiop_read_cap - Simulate READ CAPACITY[ 16] commands
+ * @args: device IDENTIFY data / SCSI command of interest.
+ * @rbuf: Response buffer, to which simulated SCSI cmd output is sent.
+ *
+ * Simulate READ CAPACITY commands.
+ *
+ * LOCKING:
+ * None.
+ */
+static unsigned int ata_scsiop_read_cap(struct ata_scsi_args *args, u8 *rbuf)
+{
+ struct ata_device *dev = args->dev;
+ u64 last_lba = dev->n_sectors - 1; /* LBA of the last block */
+ u32 sector_size; /* physical sector size in bytes */
+ u8 log2_per_phys;
+ u16 lowest_aligned;
+
+ sector_size = ata_id_logical_sector_size(dev->id);
+ log2_per_phys = ata_id_log2_per_physical_sector(dev->id);
+ lowest_aligned = ata_id_logical_sector_offset(dev->id, log2_per_phys);
+
+ VPRINTK("ENTER\n");
+
+ if (args->cmd->cmnd[0] == READ_CAPACITY) {
+ if (last_lba >= 0xffffffffULL)
+ last_lba = 0xffffffff;
+
+ /* sector count, 32-bit */
+ rbuf[0] = last_lba >> (8 * 3);
+ rbuf[1] = last_lba >> (8 * 2);
+ rbuf[2] = last_lba >> (8 * 1);
+ rbuf[3] = last_lba;
+
+ /* sector size */
+ rbuf[4] = sector_size >> (8 * 3);
+ rbuf[5] = sector_size >> (8 * 2);
+ rbuf[6] = sector_size >> (8 * 1);
+ rbuf[7] = sector_size;
+ } else {
+ /* sector count, 64-bit */
+ rbuf[0] = last_lba >> (8 * 7);
+ rbuf[1] = last_lba >> (8 * 6);
+ rbuf[2] = last_lba >> (8 * 5);
+ rbuf[3] = last_lba >> (8 * 4);
+ rbuf[4] = last_lba >> (8 * 3);
+ rbuf[5] = last_lba >> (8 * 2);
+ rbuf[6] = last_lba >> (8 * 1);
+ rbuf[7] = last_lba;
+
+ /* sector size */
+ rbuf[ 8] = sector_size >> (8 * 3);
+ rbuf[ 9] = sector_size >> (8 * 2);
+ rbuf[10] = sector_size >> (8 * 1);
+ rbuf[11] = sector_size;
+
+ rbuf[12] = 0;
+ rbuf[13] = log2_per_phys;
+ rbuf[14] = (lowest_aligned >> 8) & 0x3f;
+ rbuf[15] = lowest_aligned;
+
+ if (ata_id_has_trim(args->id)) {
+ rbuf[14] |= 0x80; /* LBPME */
+
+ if (ata_id_has_zero_after_trim(args->id) &&
+ dev->horkage & ATA_HORKAGE_ZERO_AFTER_TRIM) {
+ ata_dev_info(dev, "Enabling discard_zeroes_data\n");
+ rbuf[14] |= 0x40; /* LBPRZ */
+ }
+ }
+ }
+ return 0;
+}
+
+/**
+ * ata_scsiop_report_luns - Simulate REPORT LUNS command
+ * @args: device IDENTIFY data / SCSI command of interest.
+ * @rbuf: Response buffer, to which simulated SCSI cmd output is sent.
+ *
+ * Simulate REPORT LUNS command.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ */
+static unsigned int ata_scsiop_report_luns(struct ata_scsi_args *args, u8 *rbuf)
+{
+ VPRINTK("ENTER\n");
+ rbuf[3] = 8; /* just one lun, LUN 0, size 8 bytes */
+
+ return 0;
+}
+
+static void atapi_sense_complete(struct ata_queued_cmd *qc)
+{
+ if (qc->err_mask && ((qc->err_mask & AC_ERR_DEV) == 0)) {
+ /* FIXME: not quite right; we don't want the
+ * translation of taskfile registers into
+ * a sense descriptors, since that's only
+ * correct for ATA, not ATAPI
+ */
+ ata_gen_passthru_sense(qc);
+ }
+
+ qc->scsidone(qc->scsicmd);
+ ata_qc_free(qc);
+}
+
+/* is it pointless to prefer PIO for "safety reasons"? */
+static inline int ata_pio_use_silly(struct ata_port *ap)
+{
+ return (ap->flags & ATA_FLAG_PIO_DMA);
+}
+
+static void atapi_request_sense(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct scsi_cmnd *cmd = qc->scsicmd;
+
+ DPRINTK("ATAPI request sense\n");
+
+ memset(cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
+
+#ifdef CONFIG_ATA_SFF
+ if (ap->ops->sff_tf_read)
+ ap->ops->sff_tf_read(ap, &qc->tf);
+#endif
+
+ /* fill these in, for the case where they are -not- overwritten */
+ cmd->sense_buffer[0] = 0x70;
+ cmd->sense_buffer[2] = qc->tf.feature >> 4;
+
+ ata_qc_reinit(qc);
+
+ /* setup sg table and init transfer direction */
+ sg_init_one(&qc->sgent, cmd->sense_buffer, SCSI_SENSE_BUFFERSIZE);
+ ata_sg_init(qc, &qc->sgent, 1);
+ qc->dma_dir = DMA_FROM_DEVICE;
+
+ memset(&qc->cdb, 0, qc->dev->cdb_len);
+ qc->cdb[0] = REQUEST_SENSE;
+ qc->cdb[4] = SCSI_SENSE_BUFFERSIZE;
+
+ qc->tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
+ qc->tf.command = ATA_CMD_PACKET;
+
+ if (ata_pio_use_silly(ap)) {
+ qc->tf.protocol = ATAPI_PROT_DMA;
+ qc->tf.feature |= ATAPI_PKT_DMA;
+ } else {
+ qc->tf.protocol = ATAPI_PROT_PIO;
+ qc->tf.lbam = SCSI_SENSE_BUFFERSIZE;
+ qc->tf.lbah = 0;
+ }
+ qc->nbytes = SCSI_SENSE_BUFFERSIZE;
+
+ qc->complete_fn = atapi_sense_complete;
+
+ ata_qc_issue(qc);
+
+ DPRINTK("EXIT\n");
+}
+
+static void atapi_qc_complete(struct ata_queued_cmd *qc)
+{
+ struct scsi_cmnd *cmd = qc->scsicmd;
+ unsigned int err_mask = qc->err_mask;
+
+ VPRINTK("ENTER, err_mask 0x%X\n", err_mask);
+
+ /* handle completion from new EH */
+ if (unlikely(qc->ap->ops->error_handler &&
+ (err_mask || qc->flags & ATA_QCFLAG_SENSE_VALID))) {
+
+ if (!(qc->flags & ATA_QCFLAG_SENSE_VALID)) {
+ /* FIXME: not quite right; we don't want the
+ * translation of taskfile registers into a
+ * sense descriptors, since that's only
+ * correct for ATA, not ATAPI
+ */
+ ata_gen_passthru_sense(qc);
+ }
+
+ /* SCSI EH automatically locks door if sdev->locked is
+ * set. Sometimes door lock request continues to
+ * fail, for example, when no media is present. This
+ * creates a loop - SCSI EH issues door lock which
+ * fails and gets invoked again to acquire sense data
+ * for the failed command.
+ *
+ * If door lock fails, always clear sdev->locked to
+ * avoid this infinite loop.
+ *
+ * This may happen before SCSI scan is complete. Make
+ * sure qc->dev->sdev isn't NULL before dereferencing.
+ */
+ if (qc->cdb[0] == ALLOW_MEDIUM_REMOVAL && qc->dev->sdev)
+ qc->dev->sdev->locked = 0;
+
+ qc->scsicmd->result = SAM_STAT_CHECK_CONDITION;
+ qc->scsidone(cmd);
+ ata_qc_free(qc);
+ return;
+ }
+
+ /* successful completion or old EH failure path */
+ if (unlikely(err_mask & AC_ERR_DEV)) {
+ cmd->result = SAM_STAT_CHECK_CONDITION;
+ atapi_request_sense(qc);
+ return;
+ } else if (unlikely(err_mask)) {
+ /* FIXME: not quite right; we don't want the
+ * translation of taskfile registers into
+ * a sense descriptors, since that's only
+ * correct for ATA, not ATAPI
+ */
+ ata_gen_passthru_sense(qc);
+ } else {
+ u8 *scsicmd = cmd->cmnd;
+
+ if ((scsicmd[0] == INQUIRY) && ((scsicmd[1] & 0x03) == 0)) {
+ unsigned long flags;
+ u8 *buf;
+
+ buf = ata_scsi_rbuf_get(cmd, true, &flags);
+
+ /* ATAPI devices typically report zero for their SCSI version,
+ * and sometimes deviate from the spec WRT response data
+ * format. If SCSI version is reported as zero like normal,
+ * then we make the following fixups: 1) Fake MMC-5 version,
+ * to indicate to the Linux scsi midlayer this is a modern
+ * device. 2) Ensure response data format / ATAPI information
+ * are always correct.
+ */
+ if (buf[2] == 0) {
+ buf[2] = 0x5;
+ buf[3] = 0x32;
+ }
+
+ ata_scsi_rbuf_put(cmd, true, &flags);
+ }
+
+ cmd->result = SAM_STAT_GOOD;
+ }
+
+ qc->scsidone(cmd);
+ ata_qc_free(qc);
+}
+/**
+ * atapi_xlat - Initialize PACKET taskfile
+ * @qc: command structure to be initialized
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ *
+ * RETURNS:
+ * Zero on success, non-zero on failure.
+ */
+static unsigned int atapi_xlat(struct ata_queued_cmd *qc)
+{
+ struct scsi_cmnd *scmd = qc->scsicmd;
+ struct ata_device *dev = qc->dev;
+ int nodata = (scmd->sc_data_direction == DMA_NONE);
+ int using_pio = !nodata && (dev->flags & ATA_DFLAG_PIO);
+ unsigned int nbytes;
+
+ memset(qc->cdb, 0, dev->cdb_len);
+ memcpy(qc->cdb, scmd->cmnd, scmd->cmd_len);
+
+ qc->complete_fn = atapi_qc_complete;
+
+ qc->tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
+ if (scmd->sc_data_direction == DMA_TO_DEVICE) {
+ qc->tf.flags |= ATA_TFLAG_WRITE;
+ DPRINTK("direction: write\n");
+ }
+
+ qc->tf.command = ATA_CMD_PACKET;
+ ata_qc_set_pc_nbytes(qc);
+
+ /* check whether ATAPI DMA is safe */
+ if (!nodata && !using_pio && atapi_check_dma(qc))
+ using_pio = 1;
+
+ /* Some controller variants snoop this value for Packet
+ * transfers to do state machine and FIFO management. Thus we
+ * want to set it properly, and for DMA where it is
+ * effectively meaningless.
+ */
+ nbytes = min(ata_qc_raw_nbytes(qc), (unsigned int)63 * 1024);
+
+ /* Most ATAPI devices which honor transfer chunk size don't
+ * behave according to the spec when odd chunk size which
+ * matches the transfer length is specified. If the number of
+ * bytes to transfer is 2n+1. According to the spec, what
+ * should happen is to indicate that 2n+1 is going to be
+ * transferred and transfer 2n+2 bytes where the last byte is
+ * padding.
+ *
+ * In practice, this doesn't happen. ATAPI devices first
+ * indicate and transfer 2n bytes and then indicate and
+ * transfer 2 bytes where the last byte is padding.
+ *
+ * This inconsistency confuses several controllers which
+ * perform PIO using DMA such as Intel AHCIs and sil3124/32.
+ * These controllers use actual number of transferred bytes to
+ * update DMA poitner and transfer of 4n+2 bytes make those
+ * controller push DMA pointer by 4n+4 bytes because SATA data
+ * FISes are aligned to 4 bytes. This causes data corruption
+ * and buffer overrun.
+ *
+ * Always setting nbytes to even number solves this problem
+ * because then ATAPI devices don't have to split data at 2n
+ * boundaries.
+ */
+ if (nbytes & 0x1)
+ nbytes++;
+
+ qc->tf.lbam = (nbytes & 0xFF);
+ qc->tf.lbah = (nbytes >> 8);
+
+ if (nodata)
+ qc->tf.protocol = ATAPI_PROT_NODATA;
+ else if (using_pio)
+ qc->tf.protocol = ATAPI_PROT_PIO;
+ else {
+ /* DMA data xfer */
+ qc->tf.protocol = ATAPI_PROT_DMA;
+ qc->tf.feature |= ATAPI_PKT_DMA;
+
+ if ((dev->flags & ATA_DFLAG_DMADIR) &&
+ (scmd->sc_data_direction != DMA_TO_DEVICE))
+ /* some SATA bridges need us to indicate data xfer direction */
+ qc->tf.feature |= ATAPI_DMADIR;
+ }
+
+
+ /* FIXME: We need to translate 0x05 READ_BLOCK_LIMITS to a MODE_SENSE
+ as ATAPI tape drives don't get this right otherwise */
+ return 0;
+}
+
+static struct ata_device *ata_find_dev(struct ata_port *ap, int devno)
+{
+ if (!sata_pmp_attached(ap)) {
+ if (likely(devno < ata_link_max_devices(&ap->link)))
+ return &ap->link.device[devno];
+ } else {
+ if (likely(devno < ap->nr_pmp_links))
+ return &ap->pmp_link[devno].device[0];
+ }
+
+ return NULL;
+}
+
+static struct ata_device *__ata_scsi_find_dev(struct ata_port *ap,
+ const struct scsi_device *scsidev)
+{
+ int devno;
+
+ /* skip commands not addressed to targets we simulate */
+ if (!sata_pmp_attached(ap)) {
+ if (unlikely(scsidev->channel || scsidev->lun))
+ return NULL;
+ devno = scsidev->id;
+ } else {
+ if (unlikely(scsidev->id || scsidev->lun))
+ return NULL;
+ devno = scsidev->channel;
+ }
+
+ return ata_find_dev(ap, devno);
+}
+
+/**
+ * ata_scsi_find_dev - lookup ata_device from scsi_cmnd
+ * @ap: ATA port to which the device is attached
+ * @scsidev: SCSI device from which we derive the ATA device
+ *
+ * Given various information provided in struct scsi_cmnd,
+ * map that onto an ATA bus, and using that mapping
+ * determine which ata_device is associated with the
+ * SCSI command to be sent.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ *
+ * RETURNS:
+ * Associated ATA device, or %NULL if not found.
+ */
+static struct ata_device *
+ata_scsi_find_dev(struct ata_port *ap, const struct scsi_device *scsidev)
+{
+ struct ata_device *dev = __ata_scsi_find_dev(ap, scsidev);
+
+ if (unlikely(!dev || !ata_dev_enabled(dev)))
+ return NULL;
+
+ return dev;
+}
+
+/*
+ * ata_scsi_map_proto - Map pass-thru protocol value to taskfile value.
+ * @byte1: Byte 1 from pass-thru CDB.
+ *
+ * RETURNS:
+ * ATA_PROT_UNKNOWN if mapping failed/unimplemented, protocol otherwise.
+ */
+static u8
+ata_scsi_map_proto(u8 byte1)
+{
+ switch((byte1 & 0x1e) >> 1) {
+ case 3: /* Non-data */
+ return ATA_PROT_NODATA;
+
+ case 6: /* DMA */
+ case 10: /* UDMA Data-in */
+ case 11: /* UDMA Data-Out */
+ return ATA_PROT_DMA;
+
+ case 4: /* PIO Data-in */
+ case 5: /* PIO Data-out */
+ return ATA_PROT_PIO;
+
+ case 0: /* Hard Reset */
+ case 1: /* SRST */
+ case 8: /* Device Diagnostic */
+ case 9: /* Device Reset */
+ case 7: /* DMA Queued */
+ case 12: /* FPDMA */
+ case 15: /* Return Response Info */
+ default: /* Reserved */
+ break;
+ }
+
+ return ATA_PROT_UNKNOWN;
+}
+
+/**
+ * ata_scsi_pass_thru - convert ATA pass-thru CDB to taskfile
+ * @qc: command structure to be initialized
+ *
+ * Handles either 12 or 16-byte versions of the CDB.
+ *
+ * RETURNS:
+ * Zero on success, non-zero on failure.
+ */
+static unsigned int ata_scsi_pass_thru(struct ata_queued_cmd *qc)
+{
+ struct ata_taskfile *tf = &(qc->tf);
+ struct scsi_cmnd *scmd = qc->scsicmd;
+ struct ata_device *dev = qc->dev;
+ const u8 *cdb = scmd->cmnd;
+
+ if ((tf->protocol = ata_scsi_map_proto(cdb[1])) == ATA_PROT_UNKNOWN)
+ goto invalid_fld;
+
+ /*
+ * 12 and 16 byte CDBs use different offsets to
+ * provide the various register values.
+ */
+ if (cdb[0] == ATA_16) {
+ /*
+ * 16-byte CDB - may contain extended commands.
+ *
+ * If that is the case, copy the upper byte register values.
+ */
+ if (cdb[1] & 0x01) {
+ tf->hob_feature = cdb[3];
+ tf->hob_nsect = cdb[5];
+ tf->hob_lbal = cdb[7];
+ tf->hob_lbam = cdb[9];
+ tf->hob_lbah = cdb[11];
+ tf->flags |= ATA_TFLAG_LBA48;
+ } else
+ tf->flags &= ~ATA_TFLAG_LBA48;
+
+ /*
+ * Always copy low byte, device and command registers.
+ */
+ tf->feature = cdb[4];
+ tf->nsect = cdb[6];
+ tf->lbal = cdb[8];
+ tf->lbam = cdb[10];
+ tf->lbah = cdb[12];
+ tf->device = cdb[13];
+ tf->command = cdb[14];
+ } else {
+ /*
+ * 12-byte CDB - incapable of extended commands.
+ */
+ tf->flags &= ~ATA_TFLAG_LBA48;
+
+ tf->feature = cdb[3];
+ tf->nsect = cdb[4];
+ tf->lbal = cdb[5];
+ tf->lbam = cdb[6];
+ tf->lbah = cdb[7];
+ tf->device = cdb[8];
+ tf->command = cdb[9];
+ }
+
+ /* enforce correct master/slave bit */
+ tf->device = dev->devno ?
+ tf->device | ATA_DEV1 : tf->device & ~ATA_DEV1;
+
+ switch (tf->command) {
+ /* READ/WRITE LONG use a non-standard sect_size */
+ case ATA_CMD_READ_LONG:
+ case ATA_CMD_READ_LONG_ONCE:
+ case ATA_CMD_WRITE_LONG:
+ case ATA_CMD_WRITE_LONG_ONCE:
+ if (tf->protocol != ATA_PROT_PIO || tf->nsect != 1)
+ goto invalid_fld;
+ qc->sect_size = scsi_bufflen(scmd);
+ break;
+
+ /* commands using reported Logical Block size (e.g. 512 or 4K) */
+ case ATA_CMD_CFA_WRITE_NE:
+ case ATA_CMD_CFA_TRANS_SECT:
+ case ATA_CMD_CFA_WRITE_MULT_NE:
+ /* XXX: case ATA_CMD_CFA_WRITE_SECTORS_WITHOUT_ERASE: */
+ case ATA_CMD_READ:
+ case ATA_CMD_READ_EXT:
+ case ATA_CMD_READ_QUEUED:
+ /* XXX: case ATA_CMD_READ_QUEUED_EXT: */
+ case ATA_CMD_FPDMA_READ:
+ case ATA_CMD_READ_MULTI:
+ case ATA_CMD_READ_MULTI_EXT:
+ case ATA_CMD_PIO_READ:
+ case ATA_CMD_PIO_READ_EXT:
+ case ATA_CMD_READ_STREAM_DMA_EXT:
+ case ATA_CMD_READ_STREAM_EXT:
+ case ATA_CMD_VERIFY:
+ case ATA_CMD_VERIFY_EXT:
+ case ATA_CMD_WRITE:
+ case ATA_CMD_WRITE_EXT:
+ case ATA_CMD_WRITE_FUA_EXT:
+ case ATA_CMD_WRITE_QUEUED:
+ case ATA_CMD_WRITE_QUEUED_FUA_EXT:
+ case ATA_CMD_FPDMA_WRITE:
+ case ATA_CMD_WRITE_MULTI:
+ case ATA_CMD_WRITE_MULTI_EXT:
+ case ATA_CMD_WRITE_MULTI_FUA_EXT:
+ case ATA_CMD_PIO_WRITE:
+ case ATA_CMD_PIO_WRITE_EXT:
+ case ATA_CMD_WRITE_STREAM_DMA_EXT:
+ case ATA_CMD_WRITE_STREAM_EXT:
+ qc->sect_size = scmd->device->sector_size;
+ break;
+
+ /* Everything else uses 512 byte "sectors" */
+ default:
+ qc->sect_size = ATA_SECT_SIZE;
+ }
+
+ /*
+ * Set flags so that all registers will be written, pass on
+ * write indication (used for PIO/DMA setup), result TF is
+ * copied back and we don't whine too much about its failure.
+ */
+ tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
+ if (scmd->sc_data_direction == DMA_TO_DEVICE)
+ tf->flags |= ATA_TFLAG_WRITE;
+
+ qc->flags |= ATA_QCFLAG_RESULT_TF | ATA_QCFLAG_QUIET;
+
+ /*
+ * Set transfer length.
+ *
+ * TODO: find out if we need to do more here to
+ * cover scatter/gather case.
+ */
+ ata_qc_set_pc_nbytes(qc);
+
+ /* We may not issue DMA commands if no DMA mode is set */
+ if (tf->protocol == ATA_PROT_DMA && dev->dma_mode == 0)
+ goto invalid_fld;
+
+ /* sanity check for pio multi commands */
+ if ((cdb[1] & 0xe0) && !is_multi_taskfile(tf))
+ goto invalid_fld;
+
+ if (is_multi_taskfile(tf)) {
+ unsigned int multi_count = 1 << (cdb[1] >> 5);
+
+ /* compare the passed through multi_count
+ * with the cached multi_count of libata
+ */
+ if (multi_count != dev->multi_count)
+ ata_dev_warn(dev, "invalid multi_count %u ignored\n",
+ multi_count);
+ }
+
+ /*
+ * Filter SET_FEATURES - XFER MODE command -- otherwise,
+ * SET_FEATURES - XFER MODE must be preceded/succeeded
+ * by an update to hardware-specific registers for each
+ * controller (i.e. the reason for ->set_piomode(),
+ * ->set_dmamode(), and ->post_set_mode() hooks).
+ */
+ if (tf->command == ATA_CMD_SET_FEATURES &&
+ tf->feature == SETFEATURES_XFER)
+ goto invalid_fld;
+
+ /*
+ * Filter TPM commands by default. These provide an
+ * essentially uncontrolled encrypted "back door" between
+ * applications and the disk. Set libata.allow_tpm=1 if you
+ * have a real reason for wanting to use them. This ensures
+ * that installed software cannot easily mess stuff up without
+ * user intent. DVR type users will probably ship with this enabled
+ * for movie content management.
+ *
+ * Note that for ATA8 we can issue a DCS change and DCS freeze lock
+ * for this and should do in future but that it is not sufficient as
+ * DCS is an optional feature set. Thus we also do the software filter
+ * so that we comply with the TC consortium stated goal that the user
+ * can turn off TC features of their system.
+ */
+ if (tf->command >= 0x5C && tf->command <= 0x5F && !libata_allow_tpm)
+ goto invalid_fld;
+
+ return 0;
+
+ invalid_fld:
+ ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x24, 0x00);
+ /* "Invalid field in cdb" */
+ return 1;
+}
+
+static unsigned int ata_scsi_write_same_xlat(struct ata_queued_cmd *qc)
+{
+ struct ata_taskfile *tf = &qc->tf;
+ struct scsi_cmnd *scmd = qc->scsicmd;
+ struct ata_device *dev = qc->dev;
+ const u8 *cdb = scmd->cmnd;
+ u64 block;
+ u32 n_block;
+ u32 size;
+ void *buf;
+
+ /* we may not issue DMA commands if no DMA mode is set */
+ if (unlikely(!dev->dma_mode))
+ goto invalid_fld;
+
+ if (unlikely(scmd->cmd_len < 16))
+ goto invalid_fld;
+ scsi_16_lba_len(cdb, &block, &n_block);
+
+ /* for now we only support WRITE SAME with the unmap bit set */
+ if (unlikely(!(cdb[1] & 0x8)))
+ goto invalid_fld;
+
+ /*
+ * WRITE SAME always has a sector sized buffer as payload, this
+ * should never be a multiple entry S/G list.
+ */
+ if (!scsi_sg_count(scmd))
+ goto invalid_fld;
+
+ buf = page_address(sg_page(scsi_sglist(scmd)));
+ size = ata_set_lba_range_entries(buf, 512, block, n_block);
+
+ if (ata_ncq_enabled(dev) && ata_fpdma_dsm_supported(dev)) {
+ /* Newer devices support queued TRIM commands */
+ tf->protocol = ATA_PROT_NCQ;
+ tf->command = ATA_CMD_FPDMA_SEND;
+ tf->hob_nsect = ATA_SUBCMD_FPDMA_SEND_DSM & 0x1f;
+ tf->nsect = qc->tag << 3;
+ tf->hob_feature = (size / 512) >> 8;
+ tf->feature = size / 512;
+
+ tf->auxiliary = 1;
+ } else {
+ tf->protocol = ATA_PROT_DMA;
+ tf->hob_feature = 0;
+ tf->feature = ATA_DSM_TRIM;
+ tf->hob_nsect = (size / 512) >> 8;
+ tf->nsect = size / 512;
+ tf->command = ATA_CMD_DSM;
+ }
+
+ tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE | ATA_TFLAG_LBA48 |
+ ATA_TFLAG_WRITE;
+
+ ata_qc_set_pc_nbytes(qc);
+
+ return 0;
+
+ invalid_fld:
+ ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x24, 0x00);
+ /* "Invalid field in cdb" */
+ return 1;
+}
+
+/**
+ * ata_mselect_caching - Simulate MODE SELECT for caching info page
+ * @qc: Storage for translated ATA taskfile
+ * @buf: input buffer
+ * @len: number of valid bytes in the input buffer
+ *
+ * Prepare a taskfile to modify caching information for the device.
+ *
+ * LOCKING:
+ * None.
+ */
+static int ata_mselect_caching(struct ata_queued_cmd *qc,
+ const u8 *buf, int len)
+{
+ struct ata_taskfile *tf = &qc->tf;
+ struct ata_device *dev = qc->dev;
+ char mpage[CACHE_MPAGE_LEN];
+ u8 wce;
+
+ /*
+ * The first two bytes of def_cache_mpage are a header, so offsets
+ * in mpage are off by 2 compared to buf. Same for len.
+ */
+
+ if (len != CACHE_MPAGE_LEN - 2)
+ return -EINVAL;
+
+ wce = buf[0] & (1 << 2);
+
+ /*
+ * Check that read-only bits are not modified.
+ */
+ ata_msense_caching(dev->id, mpage, false);
+ mpage[2] &= ~(1 << 2);
+ mpage[2] |= wce;
+ if (memcmp(mpage + 2, buf, CACHE_MPAGE_LEN - 2) != 0)
+ return -EINVAL;
+
+ tf->flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR;
+ tf->protocol = ATA_PROT_NODATA;
+ tf->nsect = 0;
+ tf->command = ATA_CMD_SET_FEATURES;
+ tf->feature = wce ? SETFEATURES_WC_ON : SETFEATURES_WC_OFF;
+ return 0;
+}
+
+/**
+ * ata_scsiop_mode_select - Simulate MODE SELECT 6, 10 commands
+ * @qc: Storage for translated ATA taskfile
+ *
+ * Converts a MODE SELECT command to an ATA SET FEATURES taskfile.
+ * Assume this is invoked for direct access devices (e.g. disks) only.
+ * There should be no block descriptor for other device types.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ */
+static unsigned int ata_scsi_mode_select_xlat(struct ata_queued_cmd *qc)
+{
+ struct scsi_cmnd *scmd = qc->scsicmd;
+ const u8 *cdb = scmd->cmnd;
+ const u8 *p;
+ u8 pg, spg;
+ unsigned six_byte, pg_len, hdr_len, bd_len;
+ int len;
+
+ VPRINTK("ENTER\n");
+
+ six_byte = (cdb[0] == MODE_SELECT);
+ if (six_byte) {
+ if (scmd->cmd_len < 5)
+ goto invalid_fld;
+
+ len = cdb[4];
+ hdr_len = 4;
+ } else {
+ if (scmd->cmd_len < 9)
+ goto invalid_fld;
+
+ len = (cdb[7] << 8) + cdb[8];
+ hdr_len = 8;
+ }
+
+ /* We only support PF=1, SP=0. */
+ if ((cdb[1] & 0x11) != 0x10)
+ goto invalid_fld;
+
+ /* Test early for possible overrun. */
+ if (!scsi_sg_count(scmd) || scsi_sglist(scmd)->length < len)
+ goto invalid_param_len;
+
+ p = page_address(sg_page(scsi_sglist(scmd)));
+
+ /* Move past header and block descriptors. */
+ if (len < hdr_len)
+ goto invalid_param_len;
+
+ if (six_byte)
+ bd_len = p[3];
+ else
+ bd_len = (p[6] << 8) + p[7];
+
+ len -= hdr_len;
+ p += hdr_len;
+ if (len < bd_len)
+ goto invalid_param_len;
+ if (bd_len != 0 && bd_len != 8)
+ goto invalid_param;
+
+ len -= bd_len;
+ p += bd_len;
+ if (len == 0)
+ goto skip;
+
+ /* Parse both possible formats for the mode page headers. */
+ pg = p[0] & 0x3f;
+ if (p[0] & 0x40) {
+ if (len < 4)
+ goto invalid_param_len;
+
+ spg = p[1];
+ pg_len = (p[2] << 8) | p[3];
+ p += 4;
+ len -= 4;
+ } else {
+ if (len < 2)
+ goto invalid_param_len;
+
+ spg = 0;
+ pg_len = p[1];
+ p += 2;
+ len -= 2;
+ }
+
+ /*
+ * No mode subpages supported (yet) but asking for _all_
+ * subpages may be valid
+ */
+ if (spg && (spg != ALL_SUB_MPAGES))
+ goto invalid_param;
+ if (pg_len > len)
+ goto invalid_param_len;
+
+ switch (pg) {
+ case CACHE_MPAGE:
+ if (ata_mselect_caching(qc, p, pg_len) < 0)
+ goto invalid_param;
+ break;
+
+ default: /* invalid page code */
+ goto invalid_param;
+ }
+
+ /*
+ * Only one page has changeable data, so we only support setting one
+ * page at a time.
+ */
+ if (len > pg_len)
+ goto invalid_param;
+
+ return 0;
+
+ invalid_fld:
+ /* "Invalid field in CDB" */
+ ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x24, 0x0);
+ return 1;
+
+ invalid_param:
+ /* "Invalid field in parameter list" */
+ ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x26, 0x0);
+ return 1;
+
+ invalid_param_len:
+ /* "Parameter list length error" */
+ ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x1a, 0x0);
+ return 1;
+
+ skip:
+ scmd->result = SAM_STAT_GOOD;
+ return 1;
+}
+
+/**
+ * ata_get_xlat_func - check if SCSI to ATA translation is possible
+ * @dev: ATA device
+ * @cmd: SCSI command opcode to consider
+ *
+ * Look up the SCSI command given, and determine whether the
+ * SCSI command is to be translated or simulated.
+ *
+ * RETURNS:
+ * Pointer to translation function if possible, %NULL if not.
+ */
+
+static inline ata_xlat_func_t ata_get_xlat_func(struct ata_device *dev, u8 cmd)
+{
+ switch (cmd) {
+ case READ_6:
+ case READ_10:
+ case READ_16:
+
+ case WRITE_6:
+ case WRITE_10:
+ case WRITE_16:
+ return ata_scsi_rw_xlat;
+
+ case WRITE_SAME_16:
+ return ata_scsi_write_same_xlat;
+
+ case SYNCHRONIZE_CACHE:
+ if (ata_try_flush_cache(dev))
+ return ata_scsi_flush_xlat;
+ break;
+
+ case VERIFY:
+ case VERIFY_16:
+ return ata_scsi_verify_xlat;
+
+ case ATA_12:
+ case ATA_16:
+ return ata_scsi_pass_thru;
+
+ case MODE_SELECT:
+ case MODE_SELECT_10:
+ return ata_scsi_mode_select_xlat;
+ break;
+
+ case START_STOP:
+ return ata_scsi_start_stop_xlat;
+ }
+
+ return NULL;
+}
+
+/**
+ * ata_scsi_dump_cdb - dump SCSI command contents to dmesg
+ * @ap: ATA port to which the command was being sent
+ * @cmd: SCSI command to dump
+ *
+ * Prints the contents of a SCSI command via printk().
+ */
+
+static inline void ata_scsi_dump_cdb(struct ata_port *ap,
+ struct scsi_cmnd *cmd)
+{
+#ifdef ATA_DEBUG
+ struct scsi_device *scsidev = cmd->device;
+ u8 *scsicmd = cmd->cmnd;
+
+ DPRINTK("CDB (%u:%d,%d,%d) %02x %02x %02x %02x %02x %02x %02x %02x %02x\n",
+ ap->print_id,
+ scsidev->channel, scsidev->id, scsidev->lun,
+ scsicmd[0], scsicmd[1], scsicmd[2], scsicmd[3],
+ scsicmd[4], scsicmd[5], scsicmd[6], scsicmd[7],
+ scsicmd[8]);
+#endif
+}
+
+static inline int __ata_scsi_queuecmd(struct scsi_cmnd *scmd,
+ struct ata_device *dev)
+{
+ u8 scsi_op = scmd->cmnd[0];
+ ata_xlat_func_t xlat_func;
+ int rc = 0;
+
+ if (dev->class == ATA_DEV_ATA || dev->class == ATA_DEV_ZAC) {
+ if (unlikely(!scmd->cmd_len || scmd->cmd_len > dev->cdb_len))
+ goto bad_cdb_len;
+
+ xlat_func = ata_get_xlat_func(dev, scsi_op);
+ } else {
+ if (unlikely(!scmd->cmd_len))
+ goto bad_cdb_len;
+
+ xlat_func = NULL;
+ if (likely((scsi_op != ATA_16) || !atapi_passthru16)) {
+ /* relay SCSI command to ATAPI device */
+ int len = COMMAND_SIZE(scsi_op);
+ if (unlikely(len > scmd->cmd_len || len > dev->cdb_len))
+ goto bad_cdb_len;
+
+ xlat_func = atapi_xlat;
+ } else {
+ /* ATA_16 passthru, treat as an ATA command */
+ if (unlikely(scmd->cmd_len > 16))
+ goto bad_cdb_len;
+
+ xlat_func = ata_get_xlat_func(dev, scsi_op);
+ }
+ }
+
+ if (xlat_func)
+ rc = ata_scsi_translate(dev, scmd, xlat_func);
+ else
+ ata_scsi_simulate(dev, scmd);
+
+ return rc;
+
+ bad_cdb_len:
+ DPRINTK("bad CDB len=%u, scsi_op=0x%02x, max=%u\n",
+ scmd->cmd_len, scsi_op, dev->cdb_len);
+ scmd->result = DID_ERROR << 16;
+ scmd->scsi_done(scmd);
+ return 0;
+}
+
+/**
+ * ata_scsi_queuecmd - Issue SCSI cdb to libata-managed device
+ * @shost: SCSI host of command to be sent
+ * @cmd: SCSI command to be sent
+ *
+ * In some cases, this function translates SCSI commands into
+ * ATA taskfiles, and queues the taskfiles to be sent to
+ * hardware. In other cases, this function simulates a
+ * SCSI device by evaluating and responding to certain
+ * SCSI commands. This creates the overall effect of
+ * ATA and ATAPI devices appearing as SCSI devices.
+ *
+ * LOCKING:
+ * ATA host lock
+ *
+ * RETURNS:
+ * Return value from __ata_scsi_queuecmd() if @cmd can be queued,
+ * 0 otherwise.
+ */
+int ata_scsi_queuecmd(struct Scsi_Host *shost, struct scsi_cmnd *cmd)
+{
+ struct ata_port *ap;
+ struct ata_device *dev;
+ struct scsi_device *scsidev = cmd->device;
+ int rc = 0;
+ unsigned long irq_flags;
+
+ ap = ata_shost_to_port(shost);
+
+ spin_lock_irqsave(ap->lock, irq_flags);
+
+ ata_scsi_dump_cdb(ap, cmd);
+
+ dev = ata_scsi_find_dev(ap, scsidev);
+ if (likely(dev))
+ rc = __ata_scsi_queuecmd(cmd, dev);
+ else {
+ cmd->result = (DID_BAD_TARGET << 16);
+ cmd->scsi_done(cmd);
+ }
+
+ spin_unlock_irqrestore(ap->lock, irq_flags);
+
+ return rc;
+}
+
+/**
+ * ata_scsi_simulate - simulate SCSI command on ATA device
+ * @dev: the target device
+ * @cmd: SCSI command being sent to device.
+ *
+ * Interprets and directly executes a select list of SCSI commands
+ * that can be handled internally.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ */
+
+void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd)
+{
+ struct ata_scsi_args args;
+ const u8 *scsicmd = cmd->cmnd;
+ u8 tmp8;
+
+ args.dev = dev;
+ args.id = dev->id;
+ args.cmd = cmd;
+ args.done = cmd->scsi_done;
+
+ switch(scsicmd[0]) {
+ /* TODO: worth improving? */
+ case FORMAT_UNIT:
+ ata_scsi_invalid_field(cmd);
+ break;
+
+ case INQUIRY:
+ if (scsicmd[1] & 2) /* is CmdDt set? */
+ ata_scsi_invalid_field(cmd);
+ else if ((scsicmd[1] & 1) == 0) /* is EVPD clear? */
+ ata_scsi_rbuf_fill(&args, ata_scsiop_inq_std);
+ else switch (scsicmd[2]) {
+ case 0x00:
+ ata_scsi_rbuf_fill(&args, ata_scsiop_inq_00);
+ break;
+ case 0x80:
+ ata_scsi_rbuf_fill(&args, ata_scsiop_inq_80);
+ break;
+ case 0x83:
+ ata_scsi_rbuf_fill(&args, ata_scsiop_inq_83);
+ break;
+ case 0x89:
+ ata_scsi_rbuf_fill(&args, ata_scsiop_inq_89);
+ break;
+ case 0xb0:
+ ata_scsi_rbuf_fill(&args, ata_scsiop_inq_b0);
+ break;
+ case 0xb1:
+ ata_scsi_rbuf_fill(&args, ata_scsiop_inq_b1);
+ break;
+ case 0xb2:
+ ata_scsi_rbuf_fill(&args, ata_scsiop_inq_b2);
+ break;
+ default:
+ ata_scsi_invalid_field(cmd);
+ break;
+ }
+ break;
+
+ case MODE_SENSE:
+ case MODE_SENSE_10:
+ ata_scsi_rbuf_fill(&args, ata_scsiop_mode_sense);
+ break;
+
+ case READ_CAPACITY:
+ ata_scsi_rbuf_fill(&args, ata_scsiop_read_cap);
+ break;
+
+ case SERVICE_ACTION_IN_16:
+ if ((scsicmd[1] & 0x1f) == SAI_READ_CAPACITY_16)
+ ata_scsi_rbuf_fill(&args, ata_scsiop_read_cap);
+ else
+ ata_scsi_invalid_field(cmd);
+ break;
+
+ case REPORT_LUNS:
+ ata_scsi_rbuf_fill(&args, ata_scsiop_report_luns);
+ break;
+
+ case REQUEST_SENSE:
+ ata_scsi_set_sense(cmd, 0, 0, 0);
+ cmd->result = (DRIVER_SENSE << 24);
+ cmd->scsi_done(cmd);
+ break;
+
+ /* if we reach this, then writeback caching is disabled,
+ * turning this into a no-op.
+ */
+ case SYNCHRONIZE_CACHE:
+ /* fall through */
+
+ /* no-op's, complete with success */
+ case REZERO_UNIT:
+ case SEEK_6:
+ case SEEK_10:
+ case TEST_UNIT_READY:
+ ata_scsi_rbuf_fill(&args, ata_scsiop_noop);
+ break;
+
+ case SEND_DIAGNOSTIC:
+ tmp8 = scsicmd[1] & ~(1 << 3);
+ if ((tmp8 == 0x4) && (!scsicmd[3]) && (!scsicmd[4]))
+ ata_scsi_rbuf_fill(&args, ata_scsiop_noop);
+ else
+ ata_scsi_invalid_field(cmd);
+ break;
+
+ /* all other commands */
+ default:
+ ata_scsi_set_sense(cmd, ILLEGAL_REQUEST, 0x20, 0x0);
+ /* "Invalid command operation code" */
+ cmd->scsi_done(cmd);
+ break;
+ }
+}
+
+int ata_scsi_add_hosts(struct ata_host *host, struct scsi_host_template *sht)
+{
+ int i, rc;
+
+ for (i = 0; i < host->n_ports; i++) {
+ struct ata_port *ap = host->ports[i];
+ struct Scsi_Host *shost;
+
+ rc = -ENOMEM;
+ shost = scsi_host_alloc(sht, sizeof(struct ata_port *));
+ if (!shost)
+ goto err_alloc;
+
+ shost->eh_noresume = 1;
+ *(struct ata_port **)&shost->hostdata[0] = ap;
+ ap->scsi_host = shost;
+
+ shost->transportt = ata_scsi_transport_template;
+ shost->unique_id = ap->print_id;
+ shost->max_id = 16;
+ shost->max_lun = 1;
+ shost->max_channel = 1;
+ shost->max_cmd_len = 16;
+ shost->no_write_same = 1;
+
+ /* Schedule policy is determined by ->qc_defer()
+ * callback and it needs to see every deferred qc.
+ * Set host_blocked to 1 to prevent SCSI midlayer from
+ * automatically deferring requests.
+ */
+ shost->max_host_blocked = 1;
+
+ if (scsi_init_shared_tag_map(shost, host->n_tags))
+ goto err_add;
+
+ rc = scsi_add_host_with_dma(ap->scsi_host,
+ &ap->tdev, ap->host->dev);
+ if (rc)
+ goto err_add;
+ }
+
+ return 0;
+
+ err_add:
+ scsi_host_put(host->ports[i]->scsi_host);
+ err_alloc:
+ while (--i >= 0) {
+ struct Scsi_Host *shost = host->ports[i]->scsi_host;
+
+ scsi_remove_host(shost);
+ scsi_host_put(shost);
+ }
+ return rc;
+}
+
+void ata_scsi_scan_host(struct ata_port *ap, int sync)
+{
+ int tries = 5;
+ struct ata_device *last_failed_dev = NULL;
+ struct ata_link *link;
+ struct ata_device *dev;
+
+ repeat:
+ ata_for_each_link(link, ap, EDGE) {
+ ata_for_each_dev(dev, link, ENABLED) {
+ struct scsi_device *sdev;
+ int channel = 0, id = 0;
+
+ if (dev->sdev)
+ continue;
+
+ if (ata_is_host_link(link))
+ id = dev->devno;
+ else
+ channel = link->pmp;
+
+ sdev = __scsi_add_device(ap->scsi_host, channel, id, 0,
+ NULL);
+ if (!IS_ERR(sdev)) {
+ dev->sdev = sdev;
+ scsi_device_put(sdev);
+ } else {
+ dev->sdev = NULL;
+ }
+ }
+ }
+
+ /* If we scanned while EH was in progress or allocation
+ * failure occurred, scan would have failed silently. Check
+ * whether all devices are attached.
+ */
+ ata_for_each_link(link, ap, EDGE) {
+ ata_for_each_dev(dev, link, ENABLED) {
+ if (!dev->sdev)
+ goto exit_loop;
+ }
+ }
+ exit_loop:
+ if (!link)
+ return;
+
+ /* we're missing some SCSI devices */
+ if (sync) {
+ /* If caller requested synchrnous scan && we've made
+ * any progress, sleep briefly and repeat.
+ */
+ if (dev != last_failed_dev) {
+ msleep(100);
+ last_failed_dev = dev;
+ goto repeat;
+ }
+
+ /* We might be failing to detect boot device, give it
+ * a few more chances.
+ */
+ if (--tries) {
+ msleep(100);
+ goto repeat;
+ }
+
+ ata_port_err(ap,
+ "WARNING: synchronous SCSI scan failed without making any progress, switching to async\n");
+ }
+
+ queue_delayed_work(system_long_wq, &ap->hotplug_task,
+ round_jiffies_relative(HZ));
+}
+
+/**
+ * ata_scsi_offline_dev - offline attached SCSI device
+ * @dev: ATA device to offline attached SCSI device for
+ *
+ * This function is called from ata_eh_hotplug() and responsible
+ * for taking the SCSI device attached to @dev offline. This
+ * function is called with host lock which protects dev->sdev
+ * against clearing.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ *
+ * RETURNS:
+ * 1 if attached SCSI device exists, 0 otherwise.
+ */
+int ata_scsi_offline_dev(struct ata_device *dev)
+{
+ if (dev->sdev) {
+ scsi_device_set_state(dev->sdev, SDEV_OFFLINE);
+ return 1;
+ }
+ return 0;
+}
+
+/**
+ * ata_scsi_remove_dev - remove attached SCSI device
+ * @dev: ATA device to remove attached SCSI device for
+ *
+ * This function is called from ata_eh_scsi_hotplug() and
+ * responsible for removing the SCSI device attached to @dev.
+ *
+ * LOCKING:
+ * Kernel thread context (may sleep).
+ */
+static void ata_scsi_remove_dev(struct ata_device *dev)
+{
+ struct ata_port *ap = dev->link->ap;
+ struct scsi_device *sdev;
+ unsigned long flags;
+
+ /* Alas, we need to grab scan_mutex to ensure SCSI device
+ * state doesn't change underneath us and thus
+ * scsi_device_get() always succeeds. The mutex locking can
+ * be removed if there is __scsi_device_get() interface which
+ * increments reference counts regardless of device state.
+ */
+ mutex_lock(&ap->scsi_host->scan_mutex);
+ spin_lock_irqsave(ap->lock, flags);
+
+ /* clearing dev->sdev is protected by host lock */
+ sdev = dev->sdev;
+ dev->sdev = NULL;
+
+ if (sdev) {
+ /* If user initiated unplug races with us, sdev can go
+ * away underneath us after the host lock and
+ * scan_mutex are released. Hold onto it.
+ */
+ if (scsi_device_get(sdev) == 0) {
+ /* The following ensures the attached sdev is
+ * offline on return from ata_scsi_offline_dev()
+ * regardless it wins or loses the race
+ * against this function.
+ */
+ scsi_device_set_state(sdev, SDEV_OFFLINE);
+ } else {
+ WARN_ON(1);
+ sdev = NULL;
+ }
+ }
+
+ spin_unlock_irqrestore(ap->lock, flags);
+ mutex_unlock(&ap->scsi_host->scan_mutex);
+
+ if (sdev) {
+ ata_dev_info(dev, "detaching (SCSI %s)\n",
+ dev_name(&sdev->sdev_gendev));
+
+ scsi_remove_device(sdev);
+ scsi_device_put(sdev);
+ }
+}
+
+static void ata_scsi_handle_link_detach(struct ata_link *link)
+{
+ struct ata_port *ap = link->ap;
+ struct ata_device *dev;
+
+ ata_for_each_dev(dev, link, ALL) {
+ unsigned long flags;
+
+ if (!(dev->flags & ATA_DFLAG_DETACHED))
+ continue;
+
+ spin_lock_irqsave(ap->lock, flags);
+ dev->flags &= ~ATA_DFLAG_DETACHED;
+ spin_unlock_irqrestore(ap->lock, flags);
+
+ if (zpodd_dev_enabled(dev))
+ zpodd_exit(dev);
+
+ ata_scsi_remove_dev(dev);
+ }
+}
+
+/**
+ * ata_scsi_media_change_notify - send media change event
+ * @dev: Pointer to the disk device with media change event
+ *
+ * Tell the block layer to send a media change notification
+ * event.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ */
+void ata_scsi_media_change_notify(struct ata_device *dev)
+{
+ if (dev->sdev)
+ sdev_evt_send_simple(dev->sdev, SDEV_EVT_MEDIA_CHANGE,
+ GFP_ATOMIC);
+}
+
+/**
+ * ata_scsi_hotplug - SCSI part of hotplug
+ * @work: Pointer to ATA port to perform SCSI hotplug on
+ *
+ * Perform SCSI part of hotplug. It's executed from a separate
+ * workqueue after EH completes. This is necessary because SCSI
+ * hot plugging requires working EH and hot unplugging is
+ * synchronized with hot plugging with a mutex.
+ *
+ * LOCKING:
+ * Kernel thread context (may sleep).
+ */
+void ata_scsi_hotplug(struct work_struct *work)
+{
+ struct ata_port *ap =
+ container_of(work, struct ata_port, hotplug_task.work);
+ int i;
+
+ if (ap->pflags & ATA_PFLAG_UNLOADING) {
+ DPRINTK("ENTER/EXIT - unloading\n");
+ return;
+ }
+
+ /*
+ * XXX - UGLY HACK
+ *
+ * The block layer suspend/resume path is fundamentally broken due
+ * to freezable kthreads and workqueue and may deadlock if a block
+ * device gets removed while resume is in progress. I don't know
+ * what the solution is short of removing freezable kthreads and
+ * workqueues altogether.
+ *
+ * The following is an ugly hack to avoid kicking off device
+ * removal while freezer is active. This is a joke but does avoid
+ * this particular deadlock scenario.
+ *
+ * https://bugzilla.kernel.org/show_bug.cgi?id=62801
+ * http://marc.info/?l=linux-kernel&m=138695698516487
+ */
+#ifdef CONFIG_FREEZER
+ while (pm_freezing)
+ msleep(10);
+#endif
+
+ DPRINTK("ENTER\n");
+ mutex_lock(&ap->scsi_scan_mutex);
+
+ /* Unplug detached devices. We cannot use link iterator here
+ * because PMP links have to be scanned even if PMP is
+ * currently not attached. Iterate manually.
+ */
+ ata_scsi_handle_link_detach(&ap->link);
+ if (ap->pmp_link)
+ for (i = 0; i < SATA_PMP_MAX_PORTS; i++)
+ ata_scsi_handle_link_detach(&ap->pmp_link[i]);
+
+ /* scan for new ones */
+ ata_scsi_scan_host(ap, 0);
+
+ mutex_unlock(&ap->scsi_scan_mutex);
+ DPRINTK("EXIT\n");
+}
+
+/**
+ * ata_scsi_user_scan - indication for user-initiated bus scan
+ * @shost: SCSI host to scan
+ * @channel: Channel to scan
+ * @id: ID to scan
+ * @lun: LUN to scan
+ *
+ * This function is called when user explicitly requests bus
+ * scan. Set probe pending flag and invoke EH.
+ *
+ * LOCKING:
+ * SCSI layer (we don't care)
+ *
+ * RETURNS:
+ * Zero.
+ */
+int ata_scsi_user_scan(struct Scsi_Host *shost, unsigned int channel,
+ unsigned int id, u64 lun)
+{
+ struct ata_port *ap = ata_shost_to_port(shost);
+ unsigned long flags;
+ int devno, rc = 0;
+
+ if (!ap->ops->error_handler)
+ return -EOPNOTSUPP;
+
+ if (lun != SCAN_WILD_CARD && lun)
+ return -EINVAL;
+
+ if (!sata_pmp_attached(ap)) {
+ if (channel != SCAN_WILD_CARD && channel)
+ return -EINVAL;
+ devno = id;
+ } else {
+ if (id != SCAN_WILD_CARD && id)
+ return -EINVAL;
+ devno = channel;
+ }
+
+ spin_lock_irqsave(ap->lock, flags);
+
+ if (devno == SCAN_WILD_CARD) {
+ struct ata_link *link;
+
+ ata_for_each_link(link, ap, EDGE) {
+ struct ata_eh_info *ehi = &link->eh_info;
+ ehi->probe_mask |= ATA_ALL_DEVICES;
+ ehi->action |= ATA_EH_RESET;
+ }
+ } else {
+ struct ata_device *dev = ata_find_dev(ap, devno);
+
+ if (dev) {
+ struct ata_eh_info *ehi = &dev->link->eh_info;
+ ehi->probe_mask |= 1 << dev->devno;
+ ehi->action |= ATA_EH_RESET;
+ } else
+ rc = -EINVAL;
+ }
+
+ if (rc == 0) {
+ ata_port_schedule_eh(ap);
+ spin_unlock_irqrestore(ap->lock, flags);
+ ata_port_wait_eh(ap);
+ } else
+ spin_unlock_irqrestore(ap->lock, flags);
+
+ return rc;
+}
+
+/**
+ * ata_scsi_dev_rescan - initiate scsi_rescan_device()
+ * @work: Pointer to ATA port to perform scsi_rescan_device()
+ *
+ * After ATA pass thru (SAT) commands are executed successfully,
+ * libata need to propagate the changes to SCSI layer.
+ *
+ * LOCKING:
+ * Kernel thread context (may sleep).
+ */
+void ata_scsi_dev_rescan(struct work_struct *work)
+{
+ struct ata_port *ap =
+ container_of(work, struct ata_port, scsi_rescan_task);
+ struct ata_link *link;
+ struct ata_device *dev;
+ unsigned long flags;
+
+ mutex_lock(&ap->scsi_scan_mutex);
+ spin_lock_irqsave(ap->lock, flags);
+
+ ata_for_each_link(link, ap, EDGE) {
+ ata_for_each_dev(dev, link, ENABLED) {
+ struct scsi_device *sdev = dev->sdev;
+
+ if (!sdev)
+ continue;
+ if (scsi_device_get(sdev))
+ continue;
+
+ spin_unlock_irqrestore(ap->lock, flags);
+ scsi_rescan_device(&(sdev->sdev_gendev));
+ scsi_device_put(sdev);
+ spin_lock_irqsave(ap->lock, flags);
+ }
+ }
+
+ spin_unlock_irqrestore(ap->lock, flags);
+ mutex_unlock(&ap->scsi_scan_mutex);
+}
+
+/**
+ * ata_sas_port_alloc - Allocate port for a SAS attached SATA device
+ * @host: ATA host container for all SAS ports
+ * @port_info: Information from low-level host driver
+ * @shost: SCSI host that the scsi device is attached to
+ *
+ * LOCKING:
+ * PCI/etc. bus probe sem.
+ *
+ * RETURNS:
+ * ata_port pointer on success / NULL on failure.
+ */
+
+struct ata_port *ata_sas_port_alloc(struct ata_host *host,
+ struct ata_port_info *port_info,
+ struct Scsi_Host *shost)
+{
+ struct ata_port *ap;
+
+ ap = ata_port_alloc(host);
+ if (!ap)
+ return NULL;
+
+ ap->port_no = 0;
+ ap->lock = &host->lock;
+ ap->pio_mask = port_info->pio_mask;
+ ap->mwdma_mask = port_info->mwdma_mask;
+ ap->udma_mask = port_info->udma_mask;
+ ap->flags |= port_info->flags;
+ ap->ops = port_info->port_ops;
+ ap->cbl = ATA_CBL_SATA;
+
+ return ap;
+}
+EXPORT_SYMBOL_GPL(ata_sas_port_alloc);
+
+/**
+ * ata_sas_port_start - Set port up for dma.
+ * @ap: Port to initialize
+ *
+ * Called just after data structures for each port are
+ * initialized.
+ *
+ * May be used as the port_start() entry in ata_port_operations.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+int ata_sas_port_start(struct ata_port *ap)
+{
+ /*
+ * the port is marked as frozen at allocation time, but if we don't
+ * have new eh, we won't thaw it
+ */
+ if (!ap->ops->error_handler)
+ ap->pflags &= ~ATA_PFLAG_FROZEN;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ata_sas_port_start);
+
+/**
+ * ata_port_stop - Undo ata_sas_port_start()
+ * @ap: Port to shut down
+ *
+ * May be used as the port_stop() entry in ata_port_operations.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+
+void ata_sas_port_stop(struct ata_port *ap)
+{
+}
+EXPORT_SYMBOL_GPL(ata_sas_port_stop);
+
+/**
+ * ata_sas_async_probe - simply schedule probing and return
+ * @ap: Port to probe
+ *
+ * For batch scheduling of probe for sas attached ata devices, assumes
+ * the port has already been through ata_sas_port_init()
+ */
+void ata_sas_async_probe(struct ata_port *ap)
+{
+ __ata_port_probe(ap);
+}
+EXPORT_SYMBOL_GPL(ata_sas_async_probe);
+
+int ata_sas_sync_probe(struct ata_port *ap)
+{
+ return ata_port_probe(ap);
+}
+EXPORT_SYMBOL_GPL(ata_sas_sync_probe);
+
+
+/**
+ * ata_sas_port_init - Initialize a SATA device
+ * @ap: SATA port to initialize
+ *
+ * LOCKING:
+ * PCI/etc. bus probe sem.
+ *
+ * RETURNS:
+ * Zero on success, non-zero on error.
+ */
+
+int ata_sas_port_init(struct ata_port *ap)
+{
+ int rc = ap->ops->port_start(ap);
+
+ if (rc)
+ return rc;
+ ap->print_id = atomic_inc_return(&ata_print_id);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ata_sas_port_init);
+
+/**
+ * ata_sas_port_destroy - Destroy a SATA port allocated by ata_sas_port_alloc
+ * @ap: SATA port to destroy
+ *
+ */
+
+void ata_sas_port_destroy(struct ata_port *ap)
+{
+ if (ap->ops->port_stop)
+ ap->ops->port_stop(ap);
+ kfree(ap);
+}
+EXPORT_SYMBOL_GPL(ata_sas_port_destroy);
+
+/**
+ * ata_sas_slave_configure - Default slave_config routine for libata devices
+ * @sdev: SCSI device to configure
+ * @ap: ATA port to which SCSI device is attached
+ *
+ * RETURNS:
+ * Zero.
+ */
+
+int ata_sas_slave_configure(struct scsi_device *sdev, struct ata_port *ap)
+{
+ ata_scsi_sdev_config(sdev);
+ ata_scsi_dev_config(sdev, ap->link.device);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ata_sas_slave_configure);
+
+/**
+ * ata_sas_queuecmd - Issue SCSI cdb to libata-managed device
+ * @cmd: SCSI command to be sent
+ * @ap: ATA port to which the command is being sent
+ *
+ * RETURNS:
+ * Return value from __ata_scsi_queuecmd() if @cmd can be queued,
+ * 0 otherwise.
+ */
+
+int ata_sas_queuecmd(struct scsi_cmnd *cmd, struct ata_port *ap)
+{
+ int rc = 0;
+
+ ata_scsi_dump_cdb(ap, cmd);
+
+ if (likely(ata_dev_enabled(ap->link.device)))
+ rc = __ata_scsi_queuecmd(cmd, ap->link.device);
+ else {
+ cmd->result = (DID_BAD_TARGET << 16);
+ cmd->scsi_done(cmd);
+ }
+ return rc;
+}
+EXPORT_SYMBOL_GPL(ata_sas_queuecmd);
+
+int ata_sas_allocate_tag(struct ata_port *ap)
+{
+ unsigned int max_queue = ap->host->n_tags;
+ unsigned int i, tag;
+
+ for (i = 0, tag = ap->sas_last_tag + 1; i < max_queue; i++, tag++) {
+ tag = tag < max_queue ? tag : 0;
+
+ /* the last tag is reserved for internal command. */
+ if (tag == ATA_TAG_INTERNAL)
+ continue;
+
+ if (!test_and_set_bit(tag, &ap->sas_tag_allocated)) {
+ ap->sas_last_tag = tag;
+ return tag;
+ }
+ }
+ return -1;
+}
+
+void ata_sas_free_tag(unsigned int tag, struct ata_port *ap)
+{
+ clear_bit(tag, &ap->sas_tag_allocated);
+}
Code Review / kvmfornfv.git / blobdiff