Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / drivers / acpi / processor_core.c
diff --git a/kernel/drivers/acpi/processor_core.c b/kernel/drivers/acpi/processor_core.c
new file mode 100644 (file)
index 0000000..b1ec78b
--- /dev/null
@@ -0,0 +1,340 @@
+/*
+ * Copyright (C) 2005 Intel Corporation
+ * Copyright (C) 2009 Hewlett-Packard Development Company, L.P.
+ *
+ *     Alex Chiang <achiang@hp.com>
+ *     - Unified x86/ia64 implementations
+ *
+ * I/O APIC hotplug support
+ *     Yinghai Lu <yinghai@kernel.org>
+ *     Jiang Liu <jiang.liu@intel.com>
+ */
+#include <linux/export.h>
+#include <linux/acpi.h>
+#include <acpi/processor.h>
+
+#define _COMPONENT             ACPI_PROCESSOR_COMPONENT
+ACPI_MODULE_NAME("processor_core");
+
+static struct acpi_table_madt *get_madt_table(void)
+{
+       static struct acpi_table_madt *madt;
+       static int read_madt;
+
+       if (!read_madt) {
+               if (ACPI_FAILURE(acpi_get_table(ACPI_SIG_MADT, 0,
+                                       (struct acpi_table_header **)&madt)))
+                       madt = NULL;
+               read_madt++;
+       }
+
+       return madt;
+}
+
+static int map_lapic_id(struct acpi_subtable_header *entry,
+                u32 acpi_id, phys_cpuid_t *apic_id)
+{
+       struct acpi_madt_local_apic *lapic =
+               container_of(entry, struct acpi_madt_local_apic, header);
+
+       if (!(lapic->lapic_flags & ACPI_MADT_ENABLED))
+               return -ENODEV;
+
+       if (lapic->processor_id != acpi_id)
+               return -EINVAL;
+
+       *apic_id = lapic->id;
+       return 0;
+}
+
+static int map_x2apic_id(struct acpi_subtable_header *entry,
+               int device_declaration, u32 acpi_id, phys_cpuid_t *apic_id)
+{
+       struct acpi_madt_local_x2apic *apic =
+               container_of(entry, struct acpi_madt_local_x2apic, header);
+
+       if (!(apic->lapic_flags & ACPI_MADT_ENABLED))
+               return -ENODEV;
+
+       if (device_declaration && (apic->uid == acpi_id)) {
+               *apic_id = apic->local_apic_id;
+               return 0;
+       }
+
+       return -EINVAL;
+}
+
+static int map_lsapic_id(struct acpi_subtable_header *entry,
+               int device_declaration, u32 acpi_id, phys_cpuid_t *apic_id)
+{
+       struct acpi_madt_local_sapic *lsapic =
+               container_of(entry, struct acpi_madt_local_sapic, header);
+
+       if (!(lsapic->lapic_flags & ACPI_MADT_ENABLED))
+               return -ENODEV;
+
+       if (device_declaration) {
+               if ((entry->length < 16) || (lsapic->uid != acpi_id))
+                       return -EINVAL;
+       } else if (lsapic->processor_id != acpi_id)
+               return -EINVAL;
+
+       *apic_id = (lsapic->id << 8) | lsapic->eid;
+       return 0;
+}
+
+/*
+ * Retrieve the ARM CPU physical identifier (MPIDR)
+ */
+static int map_gicc_mpidr(struct acpi_subtable_header *entry,
+               int device_declaration, u32 acpi_id, phys_cpuid_t *mpidr)
+{
+       struct acpi_madt_generic_interrupt *gicc =
+           container_of(entry, struct acpi_madt_generic_interrupt, header);
+
+       if (!(gicc->flags & ACPI_MADT_ENABLED))
+               return -ENODEV;
+
+       /* device_declaration means Device object in DSDT, in the
+        * GIC interrupt model, logical processors are required to
+        * have a Processor Device object in the DSDT, so we should
+        * check device_declaration here
+        */
+       if (device_declaration && (gicc->uid == acpi_id)) {
+               *mpidr = gicc->arm_mpidr;
+               return 0;
+       }
+
+       return -EINVAL;
+}
+
+static phys_cpuid_t map_madt_entry(int type, u32 acpi_id)
+{
+       unsigned long madt_end, entry;
+       phys_cpuid_t phys_id = PHYS_CPUID_INVALID;      /* CPU hardware ID */
+       struct acpi_table_madt *madt;
+
+       madt = get_madt_table();
+       if (!madt)
+               return phys_id;
+
+       entry = (unsigned long)madt;
+       madt_end = entry + madt->header.length;
+
+       /* Parse all entries looking for a match. */
+
+       entry += sizeof(struct acpi_table_madt);
+       while (entry + sizeof(struct acpi_subtable_header) < madt_end) {
+               struct acpi_subtable_header *header =
+                       (struct acpi_subtable_header *)entry;
+               if (header->type == ACPI_MADT_TYPE_LOCAL_APIC) {
+                       if (!map_lapic_id(header, acpi_id, &phys_id))
+                               break;
+               } else if (header->type == ACPI_MADT_TYPE_LOCAL_X2APIC) {
+                       if (!map_x2apic_id(header, type, acpi_id, &phys_id))
+                               break;
+               } else if (header->type == ACPI_MADT_TYPE_LOCAL_SAPIC) {
+                       if (!map_lsapic_id(header, type, acpi_id, &phys_id))
+                               break;
+               } else if (header->type == ACPI_MADT_TYPE_GENERIC_INTERRUPT) {
+                       if (!map_gicc_mpidr(header, type, acpi_id, &phys_id))
+                               break;
+               }
+               entry += header->length;
+       }
+       return phys_id;
+}
+
+static phys_cpuid_t map_mat_entry(acpi_handle handle, int type, u32 acpi_id)
+{
+       struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+       union acpi_object *obj;
+       struct acpi_subtable_header *header;
+       phys_cpuid_t phys_id = PHYS_CPUID_INVALID;
+
+       if (ACPI_FAILURE(acpi_evaluate_object(handle, "_MAT", NULL, &buffer)))
+               goto exit;
+
+       if (!buffer.length || !buffer.pointer)
+               goto exit;
+
+       obj = buffer.pointer;
+       if (obj->type != ACPI_TYPE_BUFFER ||
+           obj->buffer.length < sizeof(struct acpi_subtable_header)) {
+               goto exit;
+       }
+
+       header = (struct acpi_subtable_header *)obj->buffer.pointer;
+       if (header->type == ACPI_MADT_TYPE_LOCAL_APIC)
+               map_lapic_id(header, acpi_id, &phys_id);
+       else if (header->type == ACPI_MADT_TYPE_LOCAL_SAPIC)
+               map_lsapic_id(header, type, acpi_id, &phys_id);
+       else if (header->type == ACPI_MADT_TYPE_LOCAL_X2APIC)
+               map_x2apic_id(header, type, acpi_id, &phys_id);
+       else if (header->type == ACPI_MADT_TYPE_GENERIC_INTERRUPT)
+               map_gicc_mpidr(header, type, acpi_id, &phys_id);
+
+exit:
+       kfree(buffer.pointer);
+       return phys_id;
+}
+
+phys_cpuid_t acpi_get_phys_id(acpi_handle handle, int type, u32 acpi_id)
+{
+       phys_cpuid_t phys_id;
+
+       phys_id = map_mat_entry(handle, type, acpi_id);
+       if (phys_id == PHYS_CPUID_INVALID)
+               phys_id = map_madt_entry(type, acpi_id);
+
+       return phys_id;
+}
+
+int acpi_map_cpuid(phys_cpuid_t phys_id, u32 acpi_id)
+{
+#ifdef CONFIG_SMP
+       int i;
+#endif
+
+       if (phys_id == PHYS_CPUID_INVALID) {
+               /*
+                * On UP processor, there is no _MAT or MADT table.
+                * So above phys_id is always set to PHYS_CPUID_INVALID.
+                *
+                * BIOS may define multiple CPU handles even for UP processor.
+                * For example,
+                *
+                * Scope (_PR)
+                * {
+                *     Processor (CPU0, 0x00, 0x00000410, 0x06) {}
+                *     Processor (CPU1, 0x01, 0x00000410, 0x06) {}
+                *     Processor (CPU2, 0x02, 0x00000410, 0x06) {}
+                *     Processor (CPU3, 0x03, 0x00000410, 0x06) {}
+                * }
+                *
+                * Ignores phys_id and always returns 0 for the processor
+                * handle with acpi id 0 if nr_cpu_ids is 1.
+                * This should be the case if SMP tables are not found.
+                * Return -1 for other CPU's handle.
+                */
+               if (nr_cpu_ids <= 1 && acpi_id == 0)
+                       return acpi_id;
+               else
+                       return -1;
+       }
+
+#ifdef CONFIG_SMP
+       for_each_possible_cpu(i) {
+               if (cpu_physical_id(i) == phys_id)
+                       return i;
+       }
+#else
+       /* In UP kernel, only processor 0 is valid */
+       if (phys_id == 0)
+               return phys_id;
+#endif
+       return -1;
+}
+
+int acpi_get_cpuid(acpi_handle handle, int type, u32 acpi_id)
+{
+       phys_cpuid_t phys_id;
+
+       phys_id = acpi_get_phys_id(handle, type, acpi_id);
+
+       return acpi_map_cpuid(phys_id, acpi_id);
+}
+EXPORT_SYMBOL_GPL(acpi_get_cpuid);
+
+#ifdef CONFIG_ACPI_HOTPLUG_IOAPIC
+static int get_ioapic_id(struct acpi_subtable_header *entry, u32 gsi_base,
+                        u64 *phys_addr, int *ioapic_id)
+{
+       struct acpi_madt_io_apic *ioapic = (struct acpi_madt_io_apic *)entry;
+
+       if (ioapic->global_irq_base != gsi_base)
+               return 0;
+
+       *phys_addr = ioapic->address;
+       *ioapic_id = ioapic->id;
+       return 1;
+}
+
+static int parse_madt_ioapic_entry(u32 gsi_base, u64 *phys_addr)
+{
+       struct acpi_subtable_header *hdr;
+       unsigned long madt_end, entry;
+       struct acpi_table_madt *madt;
+       int apic_id = -1;
+
+       madt = get_madt_table();
+       if (!madt)
+               return apic_id;
+
+       entry = (unsigned long)madt;
+       madt_end = entry + madt->header.length;
+
+       /* Parse all entries looking for a match. */
+       entry += sizeof(struct acpi_table_madt);
+       while (entry + sizeof(struct acpi_subtable_header) < madt_end) {
+               hdr = (struct acpi_subtable_header *)entry;
+               if (hdr->type == ACPI_MADT_TYPE_IO_APIC &&
+                   get_ioapic_id(hdr, gsi_base, phys_addr, &apic_id))
+                       break;
+               else
+                       entry += hdr->length;
+       }
+
+       return apic_id;
+}
+
+static int parse_mat_ioapic_entry(acpi_handle handle, u32 gsi_base,
+                                 u64 *phys_addr)
+{
+       struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+       struct acpi_subtable_header *header;
+       union acpi_object *obj;
+       int apic_id = -1;
+
+       if (ACPI_FAILURE(acpi_evaluate_object(handle, "_MAT", NULL, &buffer)))
+               goto exit;
+
+       if (!buffer.length || !buffer.pointer)
+               goto exit;
+
+       obj = buffer.pointer;
+       if (obj->type != ACPI_TYPE_BUFFER ||
+           obj->buffer.length < sizeof(struct acpi_subtable_header))
+               goto exit;
+
+       header = (struct acpi_subtable_header *)obj->buffer.pointer;
+       if (header->type == ACPI_MADT_TYPE_IO_APIC)
+               get_ioapic_id(header, gsi_base, phys_addr, &apic_id);
+
+exit:
+       kfree(buffer.pointer);
+       return apic_id;
+}
+
+/**
+ * acpi_get_ioapic_id - Get IOAPIC ID and physical address matching @gsi_base
+ * @handle:    ACPI object for IOAPIC device
+ * @gsi_base:  GSI base to match with
+ * @phys_addr: Pointer to store physical address of matching IOAPIC record
+ *
+ * Walk resources returned by ACPI_MAT method, then ACPI MADT table, to search
+ * for an ACPI IOAPIC record matching @gsi_base.
+ * Return IOAPIC id and store physical address in @phys_addr if found a match,
+ * otherwise return <0.
+ */
+int acpi_get_ioapic_id(acpi_handle handle, u32 gsi_base, u64 *phys_addr)
+{
+       int apic_id;
+
+       apic_id = parse_mat_ioapic_entry(handle, gsi_base, phys_addr);
+       if (apic_id == -1)
+               apic_id = parse_madt_ioapic_entry(gsi_base, phys_addr);
+
+       return apic_id;
+}
+#endif /* CONFIG_ACPI_HOTPLUG_IOAPIC */