--- /dev/null
+/*
+ * drivers/acpi/device_pm.c - ACPI device power management routines.
+ *
+ * Copyright (C) 2012, Intel Corp.
+ * Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+
+#include <linux/acpi.h>
+#include <linux/export.h>
+#include <linux/mutex.h>
+#include <linux/pm_qos.h>
+#include <linux/pm_runtime.h>
+
+#include "internal.h"
+
+#define _COMPONENT ACPI_POWER_COMPONENT
+ACPI_MODULE_NAME("device_pm");
+
+/**
+ * acpi_power_state_string - String representation of ACPI device power state.
+ * @state: ACPI device power state to return the string representation of.
+ */
+const char *acpi_power_state_string(int state)
+{
+ switch (state) {
+ case ACPI_STATE_D0:
+ return "D0";
+ case ACPI_STATE_D1:
+ return "D1";
+ case ACPI_STATE_D2:
+ return "D2";
+ case ACPI_STATE_D3_HOT:
+ return "D3hot";
+ case ACPI_STATE_D3_COLD:
+ return "D3cold";
+ default:
+ return "(unknown)";
+ }
+}
+
+/**
+ * acpi_device_get_power - Get power state of an ACPI device.
+ * @device: Device to get the power state of.
+ * @state: Place to store the power state of the device.
+ *
+ * This function does not update the device's power.state field, but it may
+ * update its parent's power.state field (when the parent's power state is
+ * unknown and the device's power state turns out to be D0).
+ */
+int acpi_device_get_power(struct acpi_device *device, int *state)
+{
+ int result = ACPI_STATE_UNKNOWN;
+
+ if (!device || !state)
+ return -EINVAL;
+
+ if (!device->flags.power_manageable) {
+ /* TBD: Non-recursive algorithm for walking up hierarchy. */
+ *state = device->parent ?
+ device->parent->power.state : ACPI_STATE_D0;
+ goto out;
+ }
+
+ /*
+ * Get the device's power state from power resources settings and _PSC,
+ * if available.
+ */
+ if (device->power.flags.power_resources) {
+ int error = acpi_power_get_inferred_state(device, &result);
+ if (error)
+ return error;
+ }
+ if (device->power.flags.explicit_get) {
+ acpi_handle handle = device->handle;
+ unsigned long long psc;
+ acpi_status status;
+
+ status = acpi_evaluate_integer(handle, "_PSC", NULL, &psc);
+ if (ACPI_FAILURE(status))
+ return -ENODEV;
+
+ /*
+ * The power resources settings may indicate a power state
+ * shallower than the actual power state of the device.
+ *
+ * Moreover, on systems predating ACPI 4.0, if the device
+ * doesn't depend on any power resources and _PSC returns 3,
+ * that means "power off". We need to maintain compatibility
+ * with those systems.
+ */
+ if (psc > result && psc < ACPI_STATE_D3_COLD)
+ result = psc;
+ else if (result == ACPI_STATE_UNKNOWN)
+ result = psc > ACPI_STATE_D2 ? ACPI_STATE_D3_COLD : psc;
+ }
+
+ /*
+ * If we were unsure about the device parent's power state up to this
+ * point, the fact that the device is in D0 implies that the parent has
+ * to be in D0 too, except if ignore_parent is set.
+ */
+ if (!device->power.flags.ignore_parent && device->parent
+ && device->parent->power.state == ACPI_STATE_UNKNOWN
+ && result == ACPI_STATE_D0)
+ device->parent->power.state = ACPI_STATE_D0;
+
+ *state = result;
+
+ out:
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device [%s] power state is %s\n",
+ device->pnp.bus_id, acpi_power_state_string(*state)));
+
+ return 0;
+}
+
+static int acpi_dev_pm_explicit_set(struct acpi_device *adev, int state)
+{
+ if (adev->power.states[state].flags.explicit_set) {
+ char method[5] = { '_', 'P', 'S', '0' + state, '\0' };
+ acpi_status status;
+
+ status = acpi_evaluate_object(adev->handle, method, NULL, NULL);
+ if (ACPI_FAILURE(status))
+ return -ENODEV;
+ }
+ return 0;
+}
+
+/**
+ * acpi_device_set_power - Set power state of an ACPI device.
+ * @device: Device to set the power state of.
+ * @state: New power state to set.
+ *
+ * Callers must ensure that the device is power manageable before using this
+ * function.
+ */
+int acpi_device_set_power(struct acpi_device *device, int state)
+{
+ int result = 0;
+ bool cut_power = false;
+
+ if (!device || !device->flags.power_manageable
+ || (state < ACPI_STATE_D0) || (state > ACPI_STATE_D3_COLD))
+ return -EINVAL;
+
+ /* Make sure this is a valid target state */
+
+ if (state == device->power.state) {
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device [%s] already in %s\n",
+ device->pnp.bus_id,
+ acpi_power_state_string(state)));
+ return 0;
+ }
+
+ if (!device->power.states[state].flags.valid) {
+ dev_warn(&device->dev, "Power state %s not supported\n",
+ acpi_power_state_string(state));
+ return -ENODEV;
+ }
+ if (!device->power.flags.ignore_parent &&
+ device->parent && (state < device->parent->power.state)) {
+ dev_warn(&device->dev,
+ "Cannot transition to power state %s for parent in %s\n",
+ acpi_power_state_string(state),
+ acpi_power_state_string(device->parent->power.state));
+ return -ENODEV;
+ }
+
+ /* For D3cold we should first transition into D3hot. */
+ if (state == ACPI_STATE_D3_COLD
+ && device->power.states[ACPI_STATE_D3_COLD].flags.os_accessible) {
+ state = ACPI_STATE_D3_HOT;
+ cut_power = true;
+ }
+
+ if (state < device->power.state && state != ACPI_STATE_D0
+ && device->power.state >= ACPI_STATE_D3_HOT) {
+ dev_warn(&device->dev,
+ "Cannot transition to non-D0 state from D3\n");
+ return -ENODEV;
+ }
+
+ /*
+ * Transition Power
+ * ----------------
+ * In accordance with the ACPI specification first apply power (via
+ * power resources) and then evaluate _PSx.
+ */
+ if (device->power.flags.power_resources) {
+ result = acpi_power_transition(device, state);
+ if (result)
+ goto end;
+ }
+ result = acpi_dev_pm_explicit_set(device, state);
+ if (result)
+ goto end;
+
+ if (cut_power) {
+ device->power.state = state;
+ state = ACPI_STATE_D3_COLD;
+ result = acpi_power_transition(device, state);
+ }
+
+ end:
+ if (result) {
+ dev_warn(&device->dev, "Failed to change power state to %s\n",
+ acpi_power_state_string(state));
+ } else {
+ device->power.state = state;
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+ "Device [%s] transitioned to %s\n",
+ device->pnp.bus_id,
+ acpi_power_state_string(state)));
+ }
+
+ return result;
+}
+EXPORT_SYMBOL(acpi_device_set_power);
+
+int acpi_bus_set_power(acpi_handle handle, int state)
+{
+ struct acpi_device *device;
+ int result;
+
+ result = acpi_bus_get_device(handle, &device);
+ if (result)
+ return result;
+
+ return acpi_device_set_power(device, state);
+}
+EXPORT_SYMBOL(acpi_bus_set_power);
+
+int acpi_bus_init_power(struct acpi_device *device)
+{
+ int state;
+ int result;
+
+ if (!device)
+ return -EINVAL;
+
+ device->power.state = ACPI_STATE_UNKNOWN;
+ if (!acpi_device_is_present(device))
+ return -ENXIO;
+
+ result = acpi_device_get_power(device, &state);
+ if (result)
+ return result;
+
+ if (state < ACPI_STATE_D3_COLD && device->power.flags.power_resources) {
+ result = acpi_power_on_resources(device, state);
+ if (result)
+ return result;
+
+ result = acpi_dev_pm_explicit_set(device, state);
+ if (result)
+ return result;
+ } else if (state == ACPI_STATE_UNKNOWN) {
+ /*
+ * No power resources and missing _PSC? Cross fingers and make
+ * it D0 in hope that this is what the BIOS put the device into.
+ * [We tried to force D0 here by executing _PS0, but that broke
+ * Toshiba P870-303 in a nasty way.]
+ */
+ state = ACPI_STATE_D0;
+ }
+ device->power.state = state;
+ return 0;
+}
+
+/**
+ * acpi_device_fix_up_power - Force device with missing _PSC into D0.
+ * @device: Device object whose power state is to be fixed up.
+ *
+ * Devices without power resources and _PSC, but having _PS0 and _PS3 defined,
+ * are assumed to be put into D0 by the BIOS. However, in some cases that may
+ * not be the case and this function should be used then.
+ */
+int acpi_device_fix_up_power(struct acpi_device *device)
+{
+ int ret = 0;
+
+ if (!device->power.flags.power_resources
+ && !device->power.flags.explicit_get
+ && device->power.state == ACPI_STATE_D0)
+ ret = acpi_dev_pm_explicit_set(device, ACPI_STATE_D0);
+
+ return ret;
+}
+
+int acpi_device_update_power(struct acpi_device *device, int *state_p)
+{
+ int state;
+ int result;
+
+ if (device->power.state == ACPI_STATE_UNKNOWN) {
+ result = acpi_bus_init_power(device);
+ if (!result && state_p)
+ *state_p = device->power.state;
+
+ return result;
+ }
+
+ result = acpi_device_get_power(device, &state);
+ if (result)
+ return result;
+
+ if (state == ACPI_STATE_UNKNOWN) {
+ state = ACPI_STATE_D0;
+ result = acpi_device_set_power(device, state);
+ if (result)
+ return result;
+ } else {
+ if (device->power.flags.power_resources) {
+ /*
+ * We don't need to really switch the state, bu we need
+ * to update the power resources' reference counters.
+ */
+ result = acpi_power_transition(device, state);
+ if (result)
+ return result;
+ }
+ device->power.state = state;
+ }
+ if (state_p)
+ *state_p = state;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(acpi_device_update_power);
+
+int acpi_bus_update_power(acpi_handle handle, int *state_p)
+{
+ struct acpi_device *device;
+ int result;
+
+ result = acpi_bus_get_device(handle, &device);
+ return result ? result : acpi_device_update_power(device, state_p);
+}
+EXPORT_SYMBOL_GPL(acpi_bus_update_power);
+
+bool acpi_bus_power_manageable(acpi_handle handle)
+{
+ struct acpi_device *device;
+ int result;
+
+ result = acpi_bus_get_device(handle, &device);
+ return result ? false : device->flags.power_manageable;
+}
+EXPORT_SYMBOL(acpi_bus_power_manageable);
+
+#ifdef CONFIG_PM
+static DEFINE_MUTEX(acpi_pm_notifier_lock);
+
+static void acpi_pm_notify_handler(acpi_handle handle, u32 val, void *not_used)
+{
+ struct acpi_device *adev;
+
+ if (val != ACPI_NOTIFY_DEVICE_WAKE)
+ return;
+
+ adev = acpi_bus_get_acpi_device(handle);
+ if (!adev)
+ return;
+
+ mutex_lock(&acpi_pm_notifier_lock);
+
+ if (adev->wakeup.flags.notifier_present) {
+ __pm_wakeup_event(adev->wakeup.ws, 0);
+ if (adev->wakeup.context.work.func)
+ queue_pm_work(&adev->wakeup.context.work);
+ }
+
+ mutex_unlock(&acpi_pm_notifier_lock);
+
+ acpi_bus_put_acpi_device(adev);
+}
+
+/**
+ * acpi_add_pm_notifier - Register PM notify handler for given ACPI device.
+ * @adev: ACPI device to add the notify handler for.
+ * @dev: Device to generate a wakeup event for while handling the notification.
+ * @work_func: Work function to execute when handling the notification.
+ *
+ * NOTE: @adev need not be a run-wake or wakeup device to be a valid source of
+ * PM wakeup events. For example, wakeup events may be generated for bridges
+ * if one of the devices below the bridge is signaling wakeup, even if the
+ * bridge itself doesn't have a wakeup GPE associated with it.
+ */
+acpi_status acpi_add_pm_notifier(struct acpi_device *adev, struct device *dev,
+ void (*work_func)(struct work_struct *work))
+{
+ acpi_status status = AE_ALREADY_EXISTS;
+
+ if (!dev && !work_func)
+ return AE_BAD_PARAMETER;
+
+ mutex_lock(&acpi_pm_notifier_lock);
+
+ if (adev->wakeup.flags.notifier_present)
+ goto out;
+
+ adev->wakeup.ws = wakeup_source_register(dev_name(&adev->dev));
+ adev->wakeup.context.dev = dev;
+ if (work_func)
+ INIT_WORK(&adev->wakeup.context.work, work_func);
+
+ status = acpi_install_notify_handler(adev->handle, ACPI_SYSTEM_NOTIFY,
+ acpi_pm_notify_handler, NULL);
+ if (ACPI_FAILURE(status))
+ goto out;
+
+ adev->wakeup.flags.notifier_present = true;
+
+ out:
+ mutex_unlock(&acpi_pm_notifier_lock);
+ return status;
+}
+
+/**
+ * acpi_remove_pm_notifier - Unregister PM notifier from given ACPI device.
+ * @adev: ACPI device to remove the notifier from.
+ */
+acpi_status acpi_remove_pm_notifier(struct acpi_device *adev)
+{
+ acpi_status status = AE_BAD_PARAMETER;
+
+ mutex_lock(&acpi_pm_notifier_lock);
+
+ if (!adev->wakeup.flags.notifier_present)
+ goto out;
+
+ status = acpi_remove_notify_handler(adev->handle,
+ ACPI_SYSTEM_NOTIFY,
+ acpi_pm_notify_handler);
+ if (ACPI_FAILURE(status))
+ goto out;
+
+ if (adev->wakeup.context.work.func) {
+ cancel_work_sync(&adev->wakeup.context.work);
+ adev->wakeup.context.work.func = NULL;
+ }
+ adev->wakeup.context.dev = NULL;
+ wakeup_source_unregister(adev->wakeup.ws);
+
+ adev->wakeup.flags.notifier_present = false;
+
+ out:
+ mutex_unlock(&acpi_pm_notifier_lock);
+ return status;
+}
+
+bool acpi_bus_can_wakeup(acpi_handle handle)
+{
+ struct acpi_device *device;
+ int result;
+
+ result = acpi_bus_get_device(handle, &device);
+ return result ? false : device->wakeup.flags.valid;
+}
+EXPORT_SYMBOL(acpi_bus_can_wakeup);
+
+/**
+ * acpi_dev_pm_get_state - Get preferred power state of ACPI device.
+ * @dev: Device whose preferred target power state to return.
+ * @adev: ACPI device node corresponding to @dev.
+ * @target_state: System state to match the resultant device state.
+ * @d_min_p: Location to store the highest power state available to the device.
+ * @d_max_p: Location to store the lowest power state available to the device.
+ *
+ * Find the lowest power (highest number) and highest power (lowest number) ACPI
+ * device power states that the device can be in while the system is in the
+ * state represented by @target_state. Store the integer numbers representing
+ * those stats in the memory locations pointed to by @d_max_p and @d_min_p,
+ * respectively.
+ *
+ * Callers must ensure that @dev and @adev are valid pointers and that @adev
+ * actually corresponds to @dev before using this function.
+ *
+ * Returns 0 on success or -ENODATA when one of the ACPI methods fails or
+ * returns a value that doesn't make sense. The memory locations pointed to by
+ * @d_max_p and @d_min_p are only modified on success.
+ */
+static int acpi_dev_pm_get_state(struct device *dev, struct acpi_device *adev,
+ u32 target_state, int *d_min_p, int *d_max_p)
+{
+ char method[] = { '_', 'S', '0' + target_state, 'D', '\0' };
+ acpi_handle handle = adev->handle;
+ unsigned long long ret;
+ int d_min, d_max;
+ bool wakeup = false;
+ acpi_status status;
+
+ /*
+ * If the system state is S0, the lowest power state the device can be
+ * in is D3cold, unless the device has _S0W and is supposed to signal
+ * wakeup, in which case the return value of _S0W has to be used as the
+ * lowest power state available to the device.
+ */
+ d_min = ACPI_STATE_D0;
+ d_max = ACPI_STATE_D3_COLD;
+
+ /*
+ * If present, _SxD methods return the minimum D-state (highest power
+ * state) we can use for the corresponding S-states. Otherwise, the
+ * minimum D-state is D0 (ACPI 3.x).
+ */
+ if (target_state > ACPI_STATE_S0) {
+ /*
+ * We rely on acpi_evaluate_integer() not clobbering the integer
+ * provided if AE_NOT_FOUND is returned.
+ */
+ ret = d_min;
+ status = acpi_evaluate_integer(handle, method, NULL, &ret);
+ if ((ACPI_FAILURE(status) && status != AE_NOT_FOUND)
+ || ret > ACPI_STATE_D3_COLD)
+ return -ENODATA;
+
+ /*
+ * We need to handle legacy systems where D3hot and D3cold are
+ * the same and 3 is returned in both cases, so fall back to
+ * D3cold if D3hot is not a valid state.
+ */
+ if (!adev->power.states[ret].flags.valid) {
+ if (ret == ACPI_STATE_D3_HOT)
+ ret = ACPI_STATE_D3_COLD;
+ else
+ return -ENODATA;
+ }
+ d_min = ret;
+ wakeup = device_may_wakeup(dev) && adev->wakeup.flags.valid
+ && adev->wakeup.sleep_state >= target_state;
+ } else if (dev_pm_qos_flags(dev, PM_QOS_FLAG_REMOTE_WAKEUP) !=
+ PM_QOS_FLAGS_NONE) {
+ wakeup = adev->wakeup.flags.valid;
+ }
+
+ /*
+ * If _PRW says we can wake up the system from the target sleep state,
+ * the D-state returned by _SxD is sufficient for that (we assume a
+ * wakeup-aware driver if wake is set). Still, if _SxW exists
+ * (ACPI 3.x), it should return the maximum (lowest power) D-state that
+ * can wake the system. _S0W may be valid, too.
+ */
+ if (wakeup) {
+ method[3] = 'W';
+ status = acpi_evaluate_integer(handle, method, NULL, &ret);
+ if (status == AE_NOT_FOUND) {
+ if (target_state > ACPI_STATE_S0)
+ d_max = d_min;
+ } else if (ACPI_SUCCESS(status) && ret <= ACPI_STATE_D3_COLD) {
+ /* Fall back to D3cold if ret is not a valid state. */
+ if (!adev->power.states[ret].flags.valid)
+ ret = ACPI_STATE_D3_COLD;
+
+ d_max = ret > d_min ? ret : d_min;
+ } else {
+ return -ENODATA;
+ }
+ }
+
+ if (d_min_p)
+ *d_min_p = d_min;
+
+ if (d_max_p)
+ *d_max_p = d_max;
+
+ return 0;
+}
+
+/**
+ * acpi_pm_device_sleep_state - Get preferred power state of ACPI device.
+ * @dev: Device whose preferred target power state to return.
+ * @d_min_p: Location to store the upper limit of the allowed states range.
+ * @d_max_in: Deepest low-power state to take into consideration.
+ * Return value: Preferred power state of the device on success, -ENODEV
+ * if there's no 'struct acpi_device' for @dev, -EINVAL if @d_max_in is
+ * incorrect, or -ENODATA on ACPI method failure.
+ *
+ * The caller must ensure that @dev is valid before using this function.
+ */
+int acpi_pm_device_sleep_state(struct device *dev, int *d_min_p, int d_max_in)
+{
+ struct acpi_device *adev;
+ int ret, d_min, d_max;
+
+ if (d_max_in < ACPI_STATE_D0 || d_max_in > ACPI_STATE_D3_COLD)
+ return -EINVAL;
+
+ if (d_max_in > ACPI_STATE_D3_HOT) {
+ enum pm_qos_flags_status stat;
+
+ stat = dev_pm_qos_flags(dev, PM_QOS_FLAG_NO_POWER_OFF);
+ if (stat == PM_QOS_FLAGS_ALL)
+ d_max_in = ACPI_STATE_D3_HOT;
+ }
+
+ adev = ACPI_COMPANION(dev);
+ if (!adev) {
+ dev_dbg(dev, "ACPI companion missing in %s!\n", __func__);
+ return -ENODEV;
+ }
+
+ ret = acpi_dev_pm_get_state(dev, adev, acpi_target_system_state(),
+ &d_min, &d_max);
+ if (ret)
+ return ret;
+
+ if (d_max_in < d_min)
+ return -EINVAL;
+
+ if (d_max > d_max_in) {
+ for (d_max = d_max_in; d_max > d_min; d_max--) {
+ if (adev->power.states[d_max].flags.valid)
+ break;
+ }
+ }
+
+ if (d_min_p)
+ *d_min_p = d_min;
+
+ return d_max;
+}
+EXPORT_SYMBOL(acpi_pm_device_sleep_state);
+
+/**
+ * acpi_pm_notify_work_func - ACPI devices wakeup notification work function.
+ * @work: Work item to handle.
+ */
+static void acpi_pm_notify_work_func(struct work_struct *work)
+{
+ struct device *dev;
+
+ dev = container_of(work, struct acpi_device_wakeup_context, work)->dev;
+ if (dev) {
+ pm_wakeup_event(dev, 0);
+ pm_runtime_resume(dev);
+ }
+}
+
+/**
+ * acpi_device_wakeup - Enable/disable wakeup functionality for device.
+ * @adev: ACPI device to enable/disable wakeup functionality for.
+ * @target_state: State the system is transitioning into.
+ * @enable: Whether to enable or disable the wakeup functionality.
+ *
+ * Enable/disable the GPE associated with @adev so that it can generate
+ * wakeup signals for the device in response to external (remote) events and
+ * enable/disable device wakeup power.
+ *
+ * Callers must ensure that @adev is a valid ACPI device node before executing
+ * this function.
+ */
+static int acpi_device_wakeup(struct acpi_device *adev, u32 target_state,
+ bool enable)
+{
+ struct acpi_device_wakeup *wakeup = &adev->wakeup;
+
+ if (enable) {
+ acpi_status res;
+ int error;
+
+ error = acpi_enable_wakeup_device_power(adev, target_state);
+ if (error)
+ return error;
+
+ if (adev->wakeup.flags.enabled)
+ return 0;
+
+ res = acpi_enable_gpe(wakeup->gpe_device, wakeup->gpe_number);
+ if (ACPI_SUCCESS(res)) {
+ adev->wakeup.flags.enabled = 1;
+ } else {
+ acpi_disable_wakeup_device_power(adev);
+ return -EIO;
+ }
+ } else {
+ if (adev->wakeup.flags.enabled) {
+ acpi_disable_gpe(wakeup->gpe_device, wakeup->gpe_number);
+ adev->wakeup.flags.enabled = 0;
+ }
+ acpi_disable_wakeup_device_power(adev);
+ }
+ return 0;
+}
+
+/**
+ * acpi_pm_device_run_wake - Enable/disable remote wakeup for given device.
+ * @dev: Device to enable/disable the platform to wake up.
+ * @enable: Whether to enable or disable the wakeup functionality.
+ */
+int acpi_pm_device_run_wake(struct device *phys_dev, bool enable)
+{
+ struct acpi_device *adev;
+
+ if (!device_run_wake(phys_dev))
+ return -EINVAL;
+
+ adev = ACPI_COMPANION(phys_dev);
+ if (!adev) {
+ dev_dbg(phys_dev, "ACPI companion missing in %s!\n", __func__);
+ return -ENODEV;
+ }
+
+ return acpi_device_wakeup(adev, ACPI_STATE_S0, enable);
+}
+EXPORT_SYMBOL(acpi_pm_device_run_wake);
+
+#ifdef CONFIG_PM_SLEEP
+/**
+ * acpi_pm_device_sleep_wake - Enable or disable device to wake up the system.
+ * @dev: Device to enable/desible to wake up the system from sleep states.
+ * @enable: Whether to enable or disable @dev to wake up the system.
+ */
+int acpi_pm_device_sleep_wake(struct device *dev, bool enable)
+{
+ struct acpi_device *adev;
+ int error;
+
+ if (!device_can_wakeup(dev))
+ return -EINVAL;
+
+ adev = ACPI_COMPANION(dev);
+ if (!adev) {
+ dev_dbg(dev, "ACPI companion missing in %s!\n", __func__);
+ return -ENODEV;
+ }
+
+ error = acpi_device_wakeup(adev, acpi_target_system_state(), enable);
+ if (!error)
+ dev_info(dev, "System wakeup %s by ACPI\n",
+ enable ? "enabled" : "disabled");
+
+ return error;
+}
+#endif /* CONFIG_PM_SLEEP */
+
+/**
+ * acpi_dev_pm_low_power - Put ACPI device into a low-power state.
+ * @dev: Device to put into a low-power state.
+ * @adev: ACPI device node corresponding to @dev.
+ * @system_state: System state to choose the device state for.
+ */
+static int acpi_dev_pm_low_power(struct device *dev, struct acpi_device *adev,
+ u32 system_state)
+{
+ int ret, state;
+
+ if (!acpi_device_power_manageable(adev))
+ return 0;
+
+ ret = acpi_dev_pm_get_state(dev, adev, system_state, NULL, &state);
+ return ret ? ret : acpi_device_set_power(adev, state);
+}
+
+/**
+ * acpi_dev_pm_full_power - Put ACPI device into the full-power state.
+ * @adev: ACPI device node to put into the full-power state.
+ */
+static int acpi_dev_pm_full_power(struct acpi_device *adev)
+{
+ return acpi_device_power_manageable(adev) ?
+ acpi_device_set_power(adev, ACPI_STATE_D0) : 0;
+}
+
+/**
+ * acpi_dev_runtime_suspend - Put device into a low-power state using ACPI.
+ * @dev: Device to put into a low-power state.
+ *
+ * Put the given device into a runtime low-power state using the standard ACPI
+ * mechanism. Set up remote wakeup if desired, choose the state to put the
+ * device into (this checks if remote wakeup is expected to work too), and set
+ * the power state of the device.
+ */
+int acpi_dev_runtime_suspend(struct device *dev)
+{
+ struct acpi_device *adev = ACPI_COMPANION(dev);
+ bool remote_wakeup;
+ int error;
+
+ if (!adev)
+ return 0;
+
+ remote_wakeup = dev_pm_qos_flags(dev, PM_QOS_FLAG_REMOTE_WAKEUP) >
+ PM_QOS_FLAGS_NONE;
+ error = acpi_device_wakeup(adev, ACPI_STATE_S0, remote_wakeup);
+ if (remote_wakeup && error)
+ return -EAGAIN;
+
+ error = acpi_dev_pm_low_power(dev, adev, ACPI_STATE_S0);
+ if (error)
+ acpi_device_wakeup(adev, ACPI_STATE_S0, false);
+
+ return error;
+}
+EXPORT_SYMBOL_GPL(acpi_dev_runtime_suspend);
+
+/**
+ * acpi_dev_runtime_resume - Put device into the full-power state using ACPI.
+ * @dev: Device to put into the full-power state.
+ *
+ * Put the given device into the full-power state using the standard ACPI
+ * mechanism at run time. Set the power state of the device to ACPI D0 and
+ * disable remote wakeup.
+ */
+int acpi_dev_runtime_resume(struct device *dev)
+{
+ struct acpi_device *adev = ACPI_COMPANION(dev);
+ int error;
+
+ if (!adev)
+ return 0;
+
+ error = acpi_dev_pm_full_power(adev);
+ acpi_device_wakeup(adev, ACPI_STATE_S0, false);
+ return error;
+}
+EXPORT_SYMBOL_GPL(acpi_dev_runtime_resume);
+
+/**
+ * acpi_subsys_runtime_suspend - Suspend device using ACPI.
+ * @dev: Device to suspend.
+ *
+ * Carry out the generic runtime suspend procedure for @dev and use ACPI to put
+ * it into a runtime low-power state.
+ */
+int acpi_subsys_runtime_suspend(struct device *dev)
+{
+ int ret = pm_generic_runtime_suspend(dev);
+ return ret ? ret : acpi_dev_runtime_suspend(dev);
+}
+EXPORT_SYMBOL_GPL(acpi_subsys_runtime_suspend);
+
+/**
+ * acpi_subsys_runtime_resume - Resume device using ACPI.
+ * @dev: Device to Resume.
+ *
+ * Use ACPI to put the given device into the full-power state and carry out the
+ * generic runtime resume procedure for it.
+ */
+int acpi_subsys_runtime_resume(struct device *dev)
+{
+ int ret = acpi_dev_runtime_resume(dev);
+ return ret ? ret : pm_generic_runtime_resume(dev);
+}
+EXPORT_SYMBOL_GPL(acpi_subsys_runtime_resume);
+
+#ifdef CONFIG_PM_SLEEP
+/**
+ * acpi_dev_suspend_late - Put device into a low-power state using ACPI.
+ * @dev: Device to put into a low-power state.
+ *
+ * Put the given device into a low-power state during system transition to a
+ * sleep state using the standard ACPI mechanism. Set up system wakeup if
+ * desired, choose the state to put the device into (this checks if system
+ * wakeup is expected to work too), and set the power state of the device.
+ */
+int acpi_dev_suspend_late(struct device *dev)
+{
+ struct acpi_device *adev = ACPI_COMPANION(dev);
+ u32 target_state;
+ bool wakeup;
+ int error;
+
+ if (!adev)
+ return 0;
+
+ target_state = acpi_target_system_state();
+ wakeup = device_may_wakeup(dev) && acpi_device_can_wakeup(adev);
+ error = acpi_device_wakeup(adev, target_state, wakeup);
+ if (wakeup && error)
+ return error;
+
+ error = acpi_dev_pm_low_power(dev, adev, target_state);
+ if (error)
+ acpi_device_wakeup(adev, ACPI_STATE_UNKNOWN, false);
+
+ return error;
+}
+EXPORT_SYMBOL_GPL(acpi_dev_suspend_late);
+
+/**
+ * acpi_dev_resume_early - Put device into the full-power state using ACPI.
+ * @dev: Device to put into the full-power state.
+ *
+ * Put the given device into the full-power state using the standard ACPI
+ * mechanism during system transition to the working state. Set the power
+ * state of the device to ACPI D0 and disable remote wakeup.
+ */
+int acpi_dev_resume_early(struct device *dev)
+{
+ struct acpi_device *adev = ACPI_COMPANION(dev);
+ int error;
+
+ if (!adev)
+ return 0;
+
+ error = acpi_dev_pm_full_power(adev);
+ acpi_device_wakeup(adev, ACPI_STATE_UNKNOWN, false);
+ return error;
+}
+EXPORT_SYMBOL_GPL(acpi_dev_resume_early);
+
+/**
+ * acpi_subsys_prepare - Prepare device for system transition to a sleep state.
+ * @dev: Device to prepare.
+ */
+int acpi_subsys_prepare(struct device *dev)
+{
+ struct acpi_device *adev = ACPI_COMPANION(dev);
+ u32 sys_target;
+ int ret, state;
+
+ ret = pm_generic_prepare(dev);
+ if (ret < 0)
+ return ret;
+
+ if (!adev || !pm_runtime_suspended(dev)
+ || device_may_wakeup(dev) != !!adev->wakeup.prepare_count)
+ return 0;
+
+ sys_target = acpi_target_system_state();
+ if (sys_target == ACPI_STATE_S0)
+ return 1;
+
+ if (adev->power.flags.dsw_present)
+ return 0;
+
+ ret = acpi_dev_pm_get_state(dev, adev, sys_target, NULL, &state);
+ return !ret && state == adev->power.state;
+}
+EXPORT_SYMBOL_GPL(acpi_subsys_prepare);
+
+/**
+ * acpi_subsys_complete - Finalize device's resume during system resume.
+ * @dev: Device to handle.
+ */
+void acpi_subsys_complete(struct device *dev)
+{
+ pm_generic_complete(dev);
+ /*
+ * If the device had been runtime-suspended before the system went into
+ * the sleep state it is going out of and it has never been resumed till
+ * now, resume it in case the firmware powered it up.
+ */
+ if (dev->power.direct_complete)
+ pm_request_resume(dev);
+}
+EXPORT_SYMBOL_GPL(acpi_subsys_complete);
+
+/**
+ * acpi_subsys_suspend - Run the device driver's suspend callback.
+ * @dev: Device to handle.
+ *
+ * Follow PCI and resume devices suspended at run time before running their
+ * system suspend callbacks.
+ */
+int acpi_subsys_suspend(struct device *dev)
+{
+ pm_runtime_resume(dev);
+ return pm_generic_suspend(dev);
+}
+EXPORT_SYMBOL_GPL(acpi_subsys_suspend);
+
+/**
+ * acpi_subsys_suspend_late - Suspend device using ACPI.
+ * @dev: Device to suspend.
+ *
+ * Carry out the generic late suspend procedure for @dev and use ACPI to put
+ * it into a low-power state during system transition into a sleep state.
+ */
+int acpi_subsys_suspend_late(struct device *dev)
+{
+ int ret = pm_generic_suspend_late(dev);
+ return ret ? ret : acpi_dev_suspend_late(dev);
+}
+EXPORT_SYMBOL_GPL(acpi_subsys_suspend_late);
+
+/**
+ * acpi_subsys_resume_early - Resume device using ACPI.
+ * @dev: Device to Resume.
+ *
+ * Use ACPI to put the given device into the full-power state and carry out the
+ * generic early resume procedure for it during system transition into the
+ * working state.
+ */
+int acpi_subsys_resume_early(struct device *dev)
+{
+ int ret = acpi_dev_resume_early(dev);
+ return ret ? ret : pm_generic_resume_early(dev);
+}
+EXPORT_SYMBOL_GPL(acpi_subsys_resume_early);
+
+/**
+ * acpi_subsys_freeze - Run the device driver's freeze callback.
+ * @dev: Device to handle.
+ */
+int acpi_subsys_freeze(struct device *dev)
+{
+ /*
+ * This used to be done in acpi_subsys_prepare() for all devices and
+ * some drivers may depend on it, so do it here. Ideally, however,
+ * runtime-suspended devices should not be touched during freeze/thaw
+ * transitions.
+ */
+ pm_runtime_resume(dev);
+ return pm_generic_freeze(dev);
+}
+EXPORT_SYMBOL_GPL(acpi_subsys_freeze);
+
+#endif /* CONFIG_PM_SLEEP */
+
+static struct dev_pm_domain acpi_general_pm_domain = {
+ .ops = {
+ .runtime_suspend = acpi_subsys_runtime_suspend,
+ .runtime_resume = acpi_subsys_runtime_resume,
+#ifdef CONFIG_PM_SLEEP
+ .prepare = acpi_subsys_prepare,
+ .complete = acpi_subsys_complete,
+ .suspend = acpi_subsys_suspend,
+ .suspend_late = acpi_subsys_suspend_late,
+ .resume_early = acpi_subsys_resume_early,
+ .freeze = acpi_subsys_freeze,
+ .poweroff = acpi_subsys_suspend,
+ .poweroff_late = acpi_subsys_suspend_late,
+ .restore_early = acpi_subsys_resume_early,
+#endif
+ },
+};
+
+/**
+ * acpi_dev_pm_detach - Remove ACPI power management from the device.
+ * @dev: Device to take care of.
+ * @power_off: Whether or not to try to remove power from the device.
+ *
+ * Remove the device from the general ACPI PM domain and remove its wakeup
+ * notifier. If @power_off is set, additionally remove power from the device if
+ * possible.
+ *
+ * Callers must ensure proper synchronization of this function with power
+ * management callbacks.
+ */
+static void acpi_dev_pm_detach(struct device *dev, bool power_off)
+{
+ struct acpi_device *adev = ACPI_COMPANION(dev);
+
+ if (adev && dev->pm_domain == &acpi_general_pm_domain) {
+ dev->pm_domain = NULL;
+ acpi_remove_pm_notifier(adev);
+ if (power_off) {
+ /*
+ * If the device's PM QoS resume latency limit or flags
+ * have been exposed to user space, they have to be
+ * hidden at this point, so that they don't affect the
+ * choice of the low-power state to put the device into.
+ */
+ dev_pm_qos_hide_latency_limit(dev);
+ dev_pm_qos_hide_flags(dev);
+ acpi_device_wakeup(adev, ACPI_STATE_S0, false);
+ acpi_dev_pm_low_power(dev, adev, ACPI_STATE_S0);
+ }
+ }
+}
+
+/**
+ * acpi_dev_pm_attach - Prepare device for ACPI power management.
+ * @dev: Device to prepare.
+ * @power_on: Whether or not to power on the device.
+ *
+ * If @dev has a valid ACPI handle that has a valid struct acpi_device object
+ * attached to it, install a wakeup notification handler for the device and
+ * add it to the general ACPI PM domain. If @power_on is set, the device will
+ * be put into the ACPI D0 state before the function returns.
+ *
+ * This assumes that the @dev's bus type uses generic power management callbacks
+ * (or doesn't use any power management callbacks at all).
+ *
+ * Callers must ensure proper synchronization of this function with power
+ * management callbacks.
+ */
+int acpi_dev_pm_attach(struct device *dev, bool power_on)
+{
+ struct acpi_device *adev = ACPI_COMPANION(dev);
+
+ if (!adev)
+ return -ENODEV;
+
+ if (dev->pm_domain)
+ return -EEXIST;
+
+ acpi_add_pm_notifier(adev, dev, acpi_pm_notify_work_func);
+ dev->pm_domain = &acpi_general_pm_domain;
+ if (power_on) {
+ acpi_dev_pm_full_power(adev);
+ acpi_device_wakeup(adev, ACPI_STATE_S0, false);
+ }
+
+ dev->pm_domain->detach = acpi_dev_pm_detach;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(acpi_dev_pm_attach);
+#endif /* CONFIG_PM */
Code Review / kvmfornfv.git / blobdiff