--- /dev/null
+/*******************************************************************************
+ *
+ * Module Name: rscreate - Create resource lists/tables
+ *
+ ******************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2015, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <acpi/acpi.h>
+#include "accommon.h"
+#include "acresrc.h"
+#include "acnamesp.h"
+
+#define _COMPONENT ACPI_RESOURCES
+ACPI_MODULE_NAME("rscreate")
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_buffer_to_resource
+ *
+ * PARAMETERS: aml_buffer - Pointer to the resource byte stream
+ * aml_buffer_length - Length of the aml_buffer
+ * resource_ptr - Where the converted resource is returned
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Convert a raw AML buffer to a resource list
+ *
+ ******************************************************************************/
+acpi_status
+acpi_buffer_to_resource(u8 *aml_buffer,
+ u16 aml_buffer_length,
+ struct acpi_resource **resource_ptr)
+{
+ acpi_status status;
+ acpi_size list_size_needed;
+ void *resource;
+ void *current_resource_ptr;
+
+ ACPI_FUNCTION_TRACE(acpi_buffer_to_resource);
+
+ /*
+ * Note: we allow AE_AML_NO_RESOURCE_END_TAG, since an end tag
+ * is not required here.
+ */
+
+ /* Get the required length for the converted resource */
+
+ status = acpi_rs_get_list_length(aml_buffer, aml_buffer_length,
+ &list_size_needed);
+ if (status == AE_AML_NO_RESOURCE_END_TAG) {
+ status = AE_OK;
+ }
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
+ /* Allocate a buffer for the converted resource */
+
+ resource = ACPI_ALLOCATE_ZEROED(list_size_needed);
+ current_resource_ptr = resource;
+ if (!resource) {
+ return_ACPI_STATUS(AE_NO_MEMORY);
+ }
+
+ /* Perform the AML-to-Resource conversion */
+
+ status = acpi_ut_walk_aml_resources(NULL, aml_buffer, aml_buffer_length,
+ acpi_rs_convert_aml_to_resources,
+ ¤t_resource_ptr);
+ if (status == AE_AML_NO_RESOURCE_END_TAG) {
+ status = AE_OK;
+ }
+ if (ACPI_FAILURE(status)) {
+ ACPI_FREE(resource);
+ } else {
+ *resource_ptr = resource;
+ }
+
+ return_ACPI_STATUS(status);
+}
+
+ACPI_EXPORT_SYMBOL(acpi_buffer_to_resource)
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_rs_create_resource_list
+ *
+ * PARAMETERS: aml_buffer - Pointer to the resource byte stream
+ * output_buffer - Pointer to the user's buffer
+ *
+ * RETURN: Status: AE_OK if okay, else a valid acpi_status code
+ * If output_buffer is not large enough, output_buffer_length
+ * indicates how large output_buffer should be, else it
+ * indicates how may u8 elements of output_buffer are valid.
+ *
+ * DESCRIPTION: Takes the byte stream returned from a _CRS, _PRS control method
+ * execution and parses the stream to create a linked list
+ * of device resources.
+ *
+ ******************************************************************************/
+acpi_status
+acpi_rs_create_resource_list(union acpi_operand_object *aml_buffer,
+ struct acpi_buffer *output_buffer)
+{
+
+ acpi_status status;
+ u8 *aml_start;
+ acpi_size list_size_needed = 0;
+ u32 aml_buffer_length;
+ void *resource;
+
+ ACPI_FUNCTION_TRACE(rs_create_resource_list);
+
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO, "AmlBuffer = %p\n", aml_buffer));
+
+ /* Params already validated, so we don't re-validate here */
+
+ aml_buffer_length = aml_buffer->buffer.length;
+ aml_start = aml_buffer->buffer.pointer;
+
+ /*
+ * Pass the aml_buffer into a module that can calculate
+ * the buffer size needed for the linked list
+ */
+ status = acpi_rs_get_list_length(aml_start, aml_buffer_length,
+ &list_size_needed);
+
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Status=%X ListSizeNeeded=%X\n",
+ status, (u32) list_size_needed));
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
+ /* Validate/Allocate/Clear caller buffer */
+
+ status = acpi_ut_initialize_buffer(output_buffer, list_size_needed);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
+ /* Do the conversion */
+
+ resource = output_buffer->pointer;
+ status = acpi_ut_walk_aml_resources(NULL, aml_start, aml_buffer_length,
+ acpi_rs_convert_aml_to_resources,
+ &resource);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO, "OutputBuffer %p Length %X\n",
+ output_buffer->pointer, (u32) output_buffer->length));
+ return_ACPI_STATUS(AE_OK);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_rs_create_pci_routing_table
+ *
+ * PARAMETERS: package_object - Pointer to a package containing one
+ * of more ACPI_OPERAND_OBJECTs
+ * output_buffer - Pointer to the user's buffer
+ *
+ * RETURN: Status AE_OK if okay, else a valid acpi_status code.
+ * If the output_buffer is too small, the error will be
+ * AE_BUFFER_OVERFLOW and output_buffer->Length will point
+ * to the size buffer needed.
+ *
+ * DESCRIPTION: Takes the union acpi_operand_object package and creates a
+ * linked list of PCI interrupt descriptions
+ *
+ * NOTE: It is the caller's responsibility to ensure that the start of the
+ * output buffer is aligned properly (if necessary).
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_rs_create_pci_routing_table(union acpi_operand_object *package_object,
+ struct acpi_buffer *output_buffer)
+{
+ u8 *buffer;
+ union acpi_operand_object **top_object_list;
+ union acpi_operand_object **sub_object_list;
+ union acpi_operand_object *obj_desc;
+ acpi_size buffer_size_needed = 0;
+ u32 number_of_elements;
+ u32 index;
+ struct acpi_pci_routing_table *user_prt;
+ struct acpi_namespace_node *node;
+ acpi_status status;
+ struct acpi_buffer path_buffer;
+
+ ACPI_FUNCTION_TRACE(rs_create_pci_routing_table);
+
+ /* Params already validated, so we don't re-validate here */
+
+ /* Get the required buffer length */
+
+ status = acpi_rs_get_pci_routing_table_length(package_object,
+ &buffer_size_needed);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO, "BufferSizeNeeded = %X\n",
+ (u32) buffer_size_needed));
+
+ /* Validate/Allocate/Clear caller buffer */
+
+ status = acpi_ut_initialize_buffer(output_buffer, buffer_size_needed);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
+ /*
+ * Loop through the ACPI_INTERNAL_OBJECTS - Each object should be a
+ * package that in turn contains an u64 Address, a u8 Pin,
+ * a Name, and a u8 source_index.
+ */
+ top_object_list = package_object->package.elements;
+ number_of_elements = package_object->package.count;
+ buffer = output_buffer->pointer;
+ user_prt = ACPI_CAST_PTR(struct acpi_pci_routing_table, buffer);
+
+ for (index = 0; index < number_of_elements; index++) {
+
+ /*
+ * Point user_prt past this current structure
+ *
+ * NOTE: On the first iteration, user_prt->Length will
+ * be zero because we cleared the return buffer earlier
+ */
+ buffer += user_prt->length;
+ user_prt = ACPI_CAST_PTR(struct acpi_pci_routing_table, buffer);
+
+ /*
+ * Fill in the Length field with the information we have at this point.
+ * The minus four is to subtract the size of the u8 Source[4] member
+ * because it is added below.
+ */
+ user_prt->length = (sizeof(struct acpi_pci_routing_table) - 4);
+
+ /* Each subpackage must be of length 4 */
+
+ if ((*top_object_list)->package.count != 4) {
+ ACPI_ERROR((AE_INFO,
+ "(PRT[%u]) Need package of length 4, found length %u",
+ index, (*top_object_list)->package.count));
+ return_ACPI_STATUS(AE_AML_PACKAGE_LIMIT);
+ }
+
+ /*
+ * Dereference the subpackage.
+ * The sub_object_list will now point to an array of the four IRQ
+ * elements: [Address, Pin, Source, source_index]
+ */
+ sub_object_list = (*top_object_list)->package.elements;
+
+ /* 1) First subobject: Dereference the PRT.Address */
+
+ obj_desc = sub_object_list[0];
+ if (!obj_desc || obj_desc->common.type != ACPI_TYPE_INTEGER) {
+ ACPI_ERROR((AE_INFO,
+ "(PRT[%u].Address) Need Integer, found %s",
+ index,
+ acpi_ut_get_object_type_name(obj_desc)));
+ return_ACPI_STATUS(AE_BAD_DATA);
+ }
+
+ user_prt->address = obj_desc->integer.value;
+
+ /* 2) Second subobject: Dereference the PRT.Pin */
+
+ obj_desc = sub_object_list[1];
+ if (!obj_desc || obj_desc->common.type != ACPI_TYPE_INTEGER) {
+ ACPI_ERROR((AE_INFO,
+ "(PRT[%u].Pin) Need Integer, found %s",
+ index,
+ acpi_ut_get_object_type_name(obj_desc)));
+ return_ACPI_STATUS(AE_BAD_DATA);
+ }
+
+ user_prt->pin = (u32) obj_desc->integer.value;
+
+ /*
+ * 3) Third subobject: Dereference the PRT.source_name
+ * The name may be unresolved (slack mode), so allow a null object
+ */
+ obj_desc = sub_object_list[2];
+ if (obj_desc) {
+ switch (obj_desc->common.type) {
+ case ACPI_TYPE_LOCAL_REFERENCE:
+
+ if (obj_desc->reference.class !=
+ ACPI_REFCLASS_NAME) {
+ ACPI_ERROR((AE_INFO,
+ "(PRT[%u].Source) Need name, found Reference Class 0x%X",
+ index,
+ obj_desc->reference.class));
+ return_ACPI_STATUS(AE_BAD_DATA);
+ }
+
+ node = obj_desc->reference.node;
+
+ /* Use *remaining* length of the buffer as max for pathname */
+
+ path_buffer.length = output_buffer->length -
+ (u32) ((u8 *) user_prt->source -
+ (u8 *) output_buffer->pointer);
+ path_buffer.pointer = user_prt->source;
+
+ status =
+ acpi_ns_handle_to_pathname((acpi_handle)
+ node,
+ &path_buffer);
+
+ /* +1 to include null terminator */
+
+ user_prt->length +=
+ (u32) ACPI_STRLEN(user_prt->source) + 1;
+ break;
+
+ case ACPI_TYPE_STRING:
+
+ ACPI_STRCPY(user_prt->source,
+ obj_desc->string.pointer);
+
+ /*
+ * Add to the Length field the length of the string
+ * (add 1 for terminator)
+ */
+ user_prt->length += obj_desc->string.length + 1;
+ break;
+
+ case ACPI_TYPE_INTEGER:
+ /*
+ * If this is a number, then the Source Name is NULL, since the
+ * entire buffer was zeroed out, we can leave this alone.
+ *
+ * Add to the Length field the length of the u32 NULL
+ */
+ user_prt->length += sizeof(u32);
+ break;
+
+ default:
+
+ ACPI_ERROR((AE_INFO,
+ "(PRT[%u].Source) Need Ref/String/Integer, found %s",
+ index,
+ acpi_ut_get_object_type_name
+ (obj_desc)));
+ return_ACPI_STATUS(AE_BAD_DATA);
+ }
+ }
+
+ /* Now align the current length */
+
+ user_prt->length =
+ (u32) ACPI_ROUND_UP_TO_64BIT(user_prt->length);
+
+ /* 4) Fourth subobject: Dereference the PRT.source_index */
+
+ obj_desc = sub_object_list[3];
+ if (!obj_desc || obj_desc->common.type != ACPI_TYPE_INTEGER) {
+ ACPI_ERROR((AE_INFO,
+ "(PRT[%u].SourceIndex) Need Integer, found %s",
+ index,
+ acpi_ut_get_object_type_name(obj_desc)));
+ return_ACPI_STATUS(AE_BAD_DATA);
+ }
+
+ user_prt->source_index = (u32) obj_desc->integer.value;
+
+ /* Point to the next union acpi_operand_object in the top level package */
+
+ top_object_list++;
+ }
+
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO, "OutputBuffer %p Length %X\n",
+ output_buffer->pointer, (u32) output_buffer->length));
+ return_ACPI_STATUS(AE_OK);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_rs_create_aml_resources
+ *
+ * PARAMETERS: resource_list - Pointer to the resource list buffer
+ * output_buffer - Where the AML buffer is returned
+ *
+ * RETURN: Status AE_OK if okay, else a valid acpi_status code.
+ * If the output_buffer is too small, the error will be
+ * AE_BUFFER_OVERFLOW and output_buffer->Length will point
+ * to the size buffer needed.
+ *
+ * DESCRIPTION: Converts a list of device resources to an AML bytestream
+ * to be used as input for the _SRS control method.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_rs_create_aml_resources(struct acpi_buffer *resource_list,
+ struct acpi_buffer *output_buffer)
+{
+ acpi_status status;
+ acpi_size aml_size_needed = 0;
+
+ ACPI_FUNCTION_TRACE(rs_create_aml_resources);
+
+ /* Params already validated, no need to re-validate here */
+
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO, "ResourceList Buffer = %p\n",
+ resource_list->pointer));
+
+ /* Get the buffer size needed for the AML byte stream */
+
+ status = acpi_rs_get_aml_length(resource_list->pointer,
+ resource_list->length,
+ &aml_size_needed);
+
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO, "AmlSizeNeeded=%X, %s\n",
+ (u32)aml_size_needed, acpi_format_exception(status)));
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
+ /* Validate/Allocate/Clear caller buffer */
+
+ status = acpi_ut_initialize_buffer(output_buffer, aml_size_needed);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
+ /* Do the conversion */
+
+ status = acpi_rs_convert_resources_to_aml(resource_list->pointer,
+ aml_size_needed,
+ output_buffer->pointer);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO, "OutputBuffer %p Length %X\n",
+ output_buffer->pointer, (u32) output_buffer->length));
+ return_ACPI_STATUS(AE_OK);
+}
Code Review / kvmfornfv.git / blobdiff