--- /dev/null
+#
+# Generic algorithms support
+#
+config XOR_BLOCKS
+ tristate
+
+#
+# async_tx api: hardware offloaded memory transfer/transform support
+#
+source "crypto/async_tx/Kconfig"
+
+#
+# Cryptographic API Configuration
+#
+menuconfig CRYPTO
+ tristate "Cryptographic API"
+ help
+ This option provides the core Cryptographic API.
+
+if CRYPTO
+
+comment "Crypto core or helper"
+
+config CRYPTO_FIPS
+ bool "FIPS 200 compliance"
+ depends on (CRYPTO_ANSI_CPRNG || CRYPTO_DRBG) && !CRYPTO_MANAGER_DISABLE_TESTS
+ depends on MODULE_SIG
+ help
+ This options enables the fips boot option which is
+ required if you want to system to operate in a FIPS 200
+ certification. You should say no unless you know what
+ this is.
+
+config CRYPTO_ALGAPI
+ tristate
+ select CRYPTO_ALGAPI2
+ help
+ This option provides the API for cryptographic algorithms.
+
+config CRYPTO_ALGAPI2
+ tristate
+
+config CRYPTO_AEAD
+ tristate
+ select CRYPTO_AEAD2
+ select CRYPTO_ALGAPI
+
+config CRYPTO_AEAD2
+ tristate
+ select CRYPTO_ALGAPI2
+
+config CRYPTO_BLKCIPHER
+ tristate
+ select CRYPTO_BLKCIPHER2
+ select CRYPTO_ALGAPI
+
+config CRYPTO_BLKCIPHER2
+ tristate
+ select CRYPTO_ALGAPI2
+ select CRYPTO_RNG2
+ select CRYPTO_WORKQUEUE
+
+config CRYPTO_HASH
+ tristate
+ select CRYPTO_HASH2
+ select CRYPTO_ALGAPI
+
+config CRYPTO_HASH2
+ tristate
+ select CRYPTO_ALGAPI2
+
+config CRYPTO_RNG
+ tristate
+ select CRYPTO_RNG2
+ select CRYPTO_ALGAPI
+
+config CRYPTO_RNG2
+ tristate
+ select CRYPTO_ALGAPI2
+
+config CRYPTO_PCOMP
+ tristate
+ select CRYPTO_PCOMP2
+ select CRYPTO_ALGAPI
+
+config CRYPTO_PCOMP2
+ tristate
+ select CRYPTO_ALGAPI2
+
+config CRYPTO_MANAGER
+ tristate "Cryptographic algorithm manager"
+ select CRYPTO_MANAGER2
+ help
+ Create default cryptographic template instantiations such as
+ cbc(aes).
+
+config CRYPTO_MANAGER2
+ def_tristate CRYPTO_MANAGER || (CRYPTO_MANAGER!=n && CRYPTO_ALGAPI=y)
+ select CRYPTO_AEAD2
+ select CRYPTO_HASH2
+ select CRYPTO_BLKCIPHER2
+ select CRYPTO_PCOMP2
+
+config CRYPTO_USER
+ tristate "Userspace cryptographic algorithm configuration"
+ depends on NET
+ select CRYPTO_MANAGER
+ help
+ Userspace configuration for cryptographic instantiations such as
+ cbc(aes).
+
+config CRYPTO_MANAGER_DISABLE_TESTS
+ bool "Disable run-time self tests"
+ default y
+ depends on CRYPTO_MANAGER2
+ help
+ Disable run-time self tests that normally take place at
+ algorithm registration.
+
+config CRYPTO_GF128MUL
+ tristate "GF(2^128) multiplication functions"
+ help
+ Efficient table driven implementation of multiplications in the
+ field GF(2^128). This is needed by some cypher modes. This
+ option will be selected automatically if you select such a
+ cipher mode. Only select this option by hand if you expect to load
+ an external module that requires these functions.
+
+config CRYPTO_NULL
+ tristate "Null algorithms"
+ select CRYPTO_ALGAPI
+ select CRYPTO_BLKCIPHER
+ select CRYPTO_HASH
+ help
+ These are 'Null' algorithms, used by IPsec, which do nothing.
+
+config CRYPTO_PCRYPT
+ tristate "Parallel crypto engine"
+ depends on SMP
+ select PADATA
+ select CRYPTO_MANAGER
+ select CRYPTO_AEAD
+ help
+ This converts an arbitrary crypto algorithm into a parallel
+ algorithm that executes in kernel threads.
+
+config CRYPTO_WORKQUEUE
+ tristate
+
+config CRYPTO_CRYPTD
+ tristate "Software async crypto daemon"
+ select CRYPTO_BLKCIPHER
+ select CRYPTO_HASH
+ select CRYPTO_MANAGER
+ select CRYPTO_WORKQUEUE
+ help
+ This is a generic software asynchronous crypto daemon that
+ converts an arbitrary synchronous software crypto algorithm
+ into an asynchronous algorithm that executes in a kernel thread.
+
+config CRYPTO_MCRYPTD
+ tristate "Software async multi-buffer crypto daemon"
+ select CRYPTO_BLKCIPHER
+ select CRYPTO_HASH
+ select CRYPTO_MANAGER
+ select CRYPTO_WORKQUEUE
+ help
+ This is a generic software asynchronous crypto daemon that
+ provides the kernel thread to assist multi-buffer crypto
+ algorithms for submitting jobs and flushing jobs in multi-buffer
+ crypto algorithms. Multi-buffer crypto algorithms are executed
+ in the context of this kernel thread and drivers can post
+ their crypto request asynchronously to be processed by this daemon.
+
+config CRYPTO_AUTHENC
+ tristate "Authenc support"
+ select CRYPTO_AEAD
+ select CRYPTO_BLKCIPHER
+ select CRYPTO_MANAGER
+ select CRYPTO_HASH
+ help
+ Authenc: Combined mode wrapper for IPsec.
+ This is required for IPSec.
+
+config CRYPTO_TEST
+ tristate "Testing module"
+ depends on m
+ select CRYPTO_MANAGER
+ help
+ Quick & dirty crypto test module.
+
+config CRYPTO_ABLK_HELPER
+ tristate
+ select CRYPTO_CRYPTD
+
+config CRYPTO_GLUE_HELPER_X86
+ tristate
+ depends on X86
+ select CRYPTO_ALGAPI
+
+comment "Authenticated Encryption with Associated Data"
+
+config CRYPTO_CCM
+ tristate "CCM support"
+ select CRYPTO_CTR
+ select CRYPTO_AEAD
+ help
+ Support for Counter with CBC MAC. Required for IPsec.
+
+config CRYPTO_GCM
+ tristate "GCM/GMAC support"
+ select CRYPTO_CTR
+ select CRYPTO_AEAD
+ select CRYPTO_GHASH
+ select CRYPTO_NULL
+ help
+ Support for Galois/Counter Mode (GCM) and Galois Message
+ Authentication Code (GMAC). Required for IPSec.
+
+config CRYPTO_SEQIV
+ tristate "Sequence Number IV Generator"
+ select CRYPTO_AEAD
+ select CRYPTO_BLKCIPHER
+ select CRYPTO_RNG
+ help
+ This IV generator generates an IV based on a sequence number by
+ xoring it with a salt. This algorithm is mainly useful for CTR
+
+comment "Block modes"
+
+config CRYPTO_CBC
+ tristate "CBC support"
+ select CRYPTO_BLKCIPHER
+ select CRYPTO_MANAGER
+ help
+ CBC: Cipher Block Chaining mode
+ This block cipher algorithm is required for IPSec.
+
+config CRYPTO_CTR
+ tristate "CTR support"
+ select CRYPTO_BLKCIPHER
+ select CRYPTO_SEQIV
+ select CRYPTO_MANAGER
+ help
+ CTR: Counter mode
+ This block cipher algorithm is required for IPSec.
+
+config CRYPTO_CTS
+ tristate "CTS support"
+ select CRYPTO_BLKCIPHER
+ help
+ CTS: Cipher Text Stealing
+ This is the Cipher Text Stealing mode as described by
+ Section 8 of rfc2040 and referenced by rfc3962.
+ (rfc3962 includes errata information in its Appendix A)
+ This mode is required for Kerberos gss mechanism support
+ for AES encryption.
+
+config CRYPTO_ECB
+ tristate "ECB support"
+ select CRYPTO_BLKCIPHER
+ select CRYPTO_MANAGER
+ help
+ ECB: Electronic CodeBook mode
+ This is the simplest block cipher algorithm. It simply encrypts
+ the input block by block.
+
+config CRYPTO_LRW
+ tristate "LRW support"
+ select CRYPTO_BLKCIPHER
+ select CRYPTO_MANAGER
+ select CRYPTO_GF128MUL
+ help
+ LRW: Liskov Rivest Wagner, a tweakable, non malleable, non movable
+ narrow block cipher mode for dm-crypt. Use it with cipher
+ specification string aes-lrw-benbi, the key must be 256, 320 or 384.
+ The first 128, 192 or 256 bits in the key are used for AES and the
+ rest is used to tie each cipher block to its logical position.
+
+config CRYPTO_PCBC
+ tristate "PCBC support"
+ select CRYPTO_BLKCIPHER
+ select CRYPTO_MANAGER
+ help
+ PCBC: Propagating Cipher Block Chaining mode
+ This block cipher algorithm is required for RxRPC.
+
+config CRYPTO_XTS
+ tristate "XTS support"
+ select CRYPTO_BLKCIPHER
+ select CRYPTO_MANAGER
+ select CRYPTO_GF128MUL
+ help
+ XTS: IEEE1619/D16 narrow block cipher use with aes-xts-plain,
+ key size 256, 384 or 512 bits. This implementation currently
+ can't handle a sectorsize which is not a multiple of 16 bytes.
+
+comment "Hash modes"
+
+config CRYPTO_CMAC
+ tristate "CMAC support"
+ select CRYPTO_HASH
+ select CRYPTO_MANAGER
+ help
+ Cipher-based Message Authentication Code (CMAC) specified by
+ The National Institute of Standards and Technology (NIST).
+
+ https://tools.ietf.org/html/rfc4493
+ http://csrc.nist.gov/publications/nistpubs/800-38B/SP_800-38B.pdf
+
+config CRYPTO_HMAC
+ tristate "HMAC support"
+ select CRYPTO_HASH
+ select CRYPTO_MANAGER
+ help
+ HMAC: Keyed-Hashing for Message Authentication (RFC2104).
+ This is required for IPSec.
+
+config CRYPTO_XCBC
+ tristate "XCBC support"
+ select CRYPTO_HASH
+ select CRYPTO_MANAGER
+ help
+ XCBC: Keyed-Hashing with encryption algorithm
+ http://www.ietf.org/rfc/rfc3566.txt
+ http://csrc.nist.gov/encryption/modes/proposedmodes/
+ xcbc-mac/xcbc-mac-spec.pdf
+
+config CRYPTO_VMAC
+ tristate "VMAC support"
+ select CRYPTO_HASH
+ select CRYPTO_MANAGER
+ help
+ VMAC is a message authentication algorithm designed for
+ very high speed on 64-bit architectures.
+
+ See also:
+ <http://fastcrypto.org/vmac>
+
+comment "Digest"
+
+config CRYPTO_CRC32C
+ tristate "CRC32c CRC algorithm"
+ select CRYPTO_HASH
+ select CRC32
+ help
+ Castagnoli, et al Cyclic Redundancy-Check Algorithm. Used
+ by iSCSI for header and data digests and by others.
+ See Castagnoli93. Module will be crc32c.
+
+config CRYPTO_CRC32C_INTEL
+ tristate "CRC32c INTEL hardware acceleration"
+ depends on X86
+ select CRYPTO_HASH
+ help
+ In Intel processor with SSE4.2 supported, the processor will
+ support CRC32C implementation using hardware accelerated CRC32
+ instruction. This option will create 'crc32c-intel' module,
+ which will enable any routine to use the CRC32 instruction to
+ gain performance compared with software implementation.
+ Module will be crc32c-intel.
+
+config CRYPTO_CRC32C_SPARC64
+ tristate "CRC32c CRC algorithm (SPARC64)"
+ depends on SPARC64
+ select CRYPTO_HASH
+ select CRC32
+ help
+ CRC32c CRC algorithm implemented using sparc64 crypto instructions,
+ when available.
+
+config CRYPTO_CRC32
+ tristate "CRC32 CRC algorithm"
+ select CRYPTO_HASH
+ select CRC32
+ help
+ CRC-32-IEEE 802.3 cyclic redundancy-check algorithm.
+ Shash crypto api wrappers to crc32_le function.
+
+config CRYPTO_CRC32_PCLMUL
+ tristate "CRC32 PCLMULQDQ hardware acceleration"
+ depends on X86
+ select CRYPTO_HASH
+ select CRC32
+ help
+ From Intel Westmere and AMD Bulldozer processor with SSE4.2
+ and PCLMULQDQ supported, the processor will support
+ CRC32 PCLMULQDQ implementation using hardware accelerated PCLMULQDQ
+ instruction. This option will create 'crc32-plcmul' module,
+ which will enable any routine to use the CRC-32-IEEE 802.3 checksum
+ and gain better performance as compared with the table implementation.
+
+config CRYPTO_CRCT10DIF
+ tristate "CRCT10DIF algorithm"
+ select CRYPTO_HASH
+ help
+ CRC T10 Data Integrity Field computation is being cast as
+ a crypto transform. This allows for faster crc t10 diff
+ transforms to be used if they are available.
+
+config CRYPTO_CRCT10DIF_PCLMUL
+ tristate "CRCT10DIF PCLMULQDQ hardware acceleration"
+ depends on X86 && 64BIT && CRC_T10DIF
+ select CRYPTO_HASH
+ help
+ For x86_64 processors with SSE4.2 and PCLMULQDQ supported,
+ CRC T10 DIF PCLMULQDQ computation can be hardware
+ accelerated PCLMULQDQ instruction. This option will create
+ 'crct10dif-plcmul' module, which is faster when computing the
+ crct10dif checksum as compared with the generic table implementation.
+
+config CRYPTO_GHASH
+ tristate "GHASH digest algorithm"
+ select CRYPTO_GF128MUL
+ help
+ GHASH is message digest algorithm for GCM (Galois/Counter Mode).
+
+config CRYPTO_MD4
+ tristate "MD4 digest algorithm"
+ select CRYPTO_HASH
+ help
+ MD4 message digest algorithm (RFC1320).
+
+config CRYPTO_MD5
+ tristate "MD5 digest algorithm"
+ select CRYPTO_HASH
+ help
+ MD5 message digest algorithm (RFC1321).
+
+config CRYPTO_MD5_OCTEON
+ tristate "MD5 digest algorithm (OCTEON)"
+ depends on CPU_CAVIUM_OCTEON
+ select CRYPTO_MD5
+ select CRYPTO_HASH
+ help
+ MD5 message digest algorithm (RFC1321) implemented
+ using OCTEON crypto instructions, when available.
+
+config CRYPTO_MD5_PPC
+ tristate "MD5 digest algorithm (PPC)"
+ depends on PPC
+ select CRYPTO_HASH
+ help
+ MD5 message digest algorithm (RFC1321) implemented
+ in PPC assembler.
+
+config CRYPTO_MD5_SPARC64
+ tristate "MD5 digest algorithm (SPARC64)"
+ depends on SPARC64
+ select CRYPTO_MD5
+ select CRYPTO_HASH
+ help
+ MD5 message digest algorithm (RFC1321) implemented
+ using sparc64 crypto instructions, when available.
+
+config CRYPTO_MICHAEL_MIC
+ tristate "Michael MIC keyed digest algorithm"
+ select CRYPTO_HASH
+ help
+ Michael MIC is used for message integrity protection in TKIP
+ (IEEE 802.11i). This algorithm is required for TKIP, but it
+ should not be used for other purposes because of the weakness
+ of the algorithm.
+
+config CRYPTO_RMD128
+ tristate "RIPEMD-128 digest algorithm"
+ select CRYPTO_HASH
+ help
+ RIPEMD-128 (ISO/IEC 10118-3:2004).
+
+ RIPEMD-128 is a 128-bit cryptographic hash function. It should only
+ be used as a secure replacement for RIPEMD. For other use cases,
+ RIPEMD-160 should be used.
+
+ Developed by Hans Dobbertin, Antoon Bosselaers and Bart Preneel.
+ See <http://homes.esat.kuleuven.be/~bosselae/ripemd160.html>
+
+config CRYPTO_RMD160
+ tristate "RIPEMD-160 digest algorithm"
+ select CRYPTO_HASH
+ help
+ RIPEMD-160 (ISO/IEC 10118-3:2004).
+
+ RIPEMD-160 is a 160-bit cryptographic hash function. It is intended
+ to be used as a secure replacement for the 128-bit hash functions
+ MD4, MD5 and it's predecessor RIPEMD
+ (not to be confused with RIPEMD-128).
+
+ It's speed is comparable to SHA1 and there are no known attacks
+ against RIPEMD-160.
+
+ Developed by Hans Dobbertin, Antoon Bosselaers and Bart Preneel.
+ See <http://homes.esat.kuleuven.be/~bosselae/ripemd160.html>
+
+config CRYPTO_RMD256
+ tristate "RIPEMD-256 digest algorithm"
+ select CRYPTO_HASH
+ help
+ RIPEMD-256 is an optional extension of RIPEMD-128 with a
+ 256 bit hash. It is intended for applications that require
+ longer hash-results, without needing a larger security level
+ (than RIPEMD-128).
+
+ Developed by Hans Dobbertin, Antoon Bosselaers and Bart Preneel.
+ See <http://homes.esat.kuleuven.be/~bosselae/ripemd160.html>
+
+config CRYPTO_RMD320
+ tristate "RIPEMD-320 digest algorithm"
+ select CRYPTO_HASH
+ help
+ RIPEMD-320 is an optional extension of RIPEMD-160 with a
+ 320 bit hash. It is intended for applications that require
+ longer hash-results, without needing a larger security level
+ (than RIPEMD-160).
+
+ Developed by Hans Dobbertin, Antoon Bosselaers and Bart Preneel.
+ See <http://homes.esat.kuleuven.be/~bosselae/ripemd160.html>
+
+config CRYPTO_SHA1
+ tristate "SHA1 digest algorithm"
+ select CRYPTO_HASH
+ help
+ SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2).
+
+config CRYPTO_SHA1_SSSE3
+ tristate "SHA1 digest algorithm (SSSE3/AVX/AVX2)"
+ depends on X86 && 64BIT
+ select CRYPTO_SHA1
+ select CRYPTO_HASH
+ help
+ SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2) implemented
+ using Supplemental SSE3 (SSSE3) instructions or Advanced Vector
+ Extensions (AVX/AVX2), when available.
+
+config CRYPTO_SHA256_SSSE3
+ tristate "SHA256 digest algorithm (SSSE3/AVX/AVX2)"
+ depends on X86 && 64BIT
+ select CRYPTO_SHA256
+ select CRYPTO_HASH
+ help
+ SHA-256 secure hash standard (DFIPS 180-2) implemented
+ using Supplemental SSE3 (SSSE3) instructions, or Advanced Vector
+ Extensions version 1 (AVX1), or Advanced Vector Extensions
+ version 2 (AVX2) instructions, when available.
+
+config CRYPTO_SHA512_SSSE3
+ tristate "SHA512 digest algorithm (SSSE3/AVX/AVX2)"
+ depends on X86 && 64BIT
+ select CRYPTO_SHA512
+ select CRYPTO_HASH
+ help
+ SHA-512 secure hash standard (DFIPS 180-2) implemented
+ using Supplemental SSE3 (SSSE3) instructions, or Advanced Vector
+ Extensions version 1 (AVX1), or Advanced Vector Extensions
+ version 2 (AVX2) instructions, when available.
+
+config CRYPTO_SHA1_OCTEON
+ tristate "SHA1 digest algorithm (OCTEON)"
+ depends on CPU_CAVIUM_OCTEON
+ select CRYPTO_SHA1
+ select CRYPTO_HASH
+ help
+ SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2) implemented
+ using OCTEON crypto instructions, when available.
+
+config CRYPTO_SHA1_SPARC64
+ tristate "SHA1 digest algorithm (SPARC64)"
+ depends on SPARC64
+ select CRYPTO_SHA1
+ select CRYPTO_HASH
+ help
+ SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2) implemented
+ using sparc64 crypto instructions, when available.
+
+config CRYPTO_SHA1_PPC
+ tristate "SHA1 digest algorithm (powerpc)"
+ depends on PPC
+ help
+ This is the powerpc hardware accelerated implementation of the
+ SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2).
+
+config CRYPTO_SHA1_PPC_SPE
+ tristate "SHA1 digest algorithm (PPC SPE)"
+ depends on PPC && SPE
+ help
+ SHA-1 secure hash standard (DFIPS 180-4) implemented
+ using powerpc SPE SIMD instruction set.
+
+config CRYPTO_SHA1_MB
+ tristate "SHA1 digest algorithm (x86_64 Multi-Buffer, Experimental)"
+ depends on X86 && 64BIT
+ select CRYPTO_SHA1
+ select CRYPTO_HASH
+ select CRYPTO_MCRYPTD
+ help
+ SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2) implemented
+ using multi-buffer technique. This algorithm computes on
+ multiple data lanes concurrently with SIMD instructions for
+ better throughput. It should not be enabled by default but
+ used when there is significant amount of work to keep the keep
+ the data lanes filled to get performance benefit. If the data
+ lanes remain unfilled, a flush operation will be initiated to
+ process the crypto jobs, adding a slight latency.
+
+config CRYPTO_SHA256
+ tristate "SHA224 and SHA256 digest algorithm"
+ select CRYPTO_HASH
+ help
+ SHA256 secure hash standard (DFIPS 180-2).
+
+ This version of SHA implements a 256 bit hash with 128 bits of
+ security against collision attacks.
+
+ This code also includes SHA-224, a 224 bit hash with 112 bits
+ of security against collision attacks.
+
+config CRYPTO_SHA256_PPC_SPE
+ tristate "SHA224 and SHA256 digest algorithm (PPC SPE)"
+ depends on PPC && SPE
+ select CRYPTO_SHA256
+ select CRYPTO_HASH
+ help
+ SHA224 and SHA256 secure hash standard (DFIPS 180-2)
+ implemented using powerpc SPE SIMD instruction set.
+
+config CRYPTO_SHA256_OCTEON
+ tristate "SHA224 and SHA256 digest algorithm (OCTEON)"
+ depends on CPU_CAVIUM_OCTEON
+ select CRYPTO_SHA256
+ select CRYPTO_HASH
+ help
+ SHA-256 secure hash standard (DFIPS 180-2) implemented
+ using OCTEON crypto instructions, when available.
+
+config CRYPTO_SHA256_SPARC64
+ tristate "SHA224 and SHA256 digest algorithm (SPARC64)"
+ depends on SPARC64
+ select CRYPTO_SHA256
+ select CRYPTO_HASH
+ help
+ SHA-256 secure hash standard (DFIPS 180-2) implemented
+ using sparc64 crypto instructions, when available.
+
+config CRYPTO_SHA512
+ tristate "SHA384 and SHA512 digest algorithms"
+ select CRYPTO_HASH
+ help
+ SHA512 secure hash standard (DFIPS 180-2).
+
+ This version of SHA implements a 512 bit hash with 256 bits of
+ security against collision attacks.
+
+ This code also includes SHA-384, a 384 bit hash with 192 bits
+ of security against collision attacks.
+
+config CRYPTO_SHA512_OCTEON
+ tristate "SHA384 and SHA512 digest algorithms (OCTEON)"
+ depends on CPU_CAVIUM_OCTEON
+ select CRYPTO_SHA512
+ select CRYPTO_HASH
+ help
+ SHA-512 secure hash standard (DFIPS 180-2) implemented
+ using OCTEON crypto instructions, when available.
+
+config CRYPTO_SHA512_SPARC64
+ tristate "SHA384 and SHA512 digest algorithm (SPARC64)"
+ depends on SPARC64
+ select CRYPTO_SHA512
+ select CRYPTO_HASH
+ help
+ SHA-512 secure hash standard (DFIPS 180-2) implemented
+ using sparc64 crypto instructions, when available.
+
+config CRYPTO_TGR192
+ tristate "Tiger digest algorithms"
+ select CRYPTO_HASH
+ help
+ Tiger hash algorithm 192, 160 and 128-bit hashes
+
+ Tiger is a hash function optimized for 64-bit processors while
+ still having decent performance on 32-bit processors.
+ Tiger was developed by Ross Anderson and Eli Biham.
+
+ See also:
+ <http://www.cs.technion.ac.il/~biham/Reports/Tiger/>.
+
+config CRYPTO_WP512
+ tristate "Whirlpool digest algorithms"
+ select CRYPTO_HASH
+ help
+ Whirlpool hash algorithm 512, 384 and 256-bit hashes
+
+ Whirlpool-512 is part of the NESSIE cryptographic primitives.
+ Whirlpool will be part of the ISO/IEC 10118-3:2003(E) standard
+
+ See also:
+ <http://www.larc.usp.br/~pbarreto/WhirlpoolPage.html>
+
+config CRYPTO_GHASH_CLMUL_NI_INTEL
+ tristate "GHASH digest algorithm (CLMUL-NI accelerated)"
+ depends on X86 && 64BIT
+ select CRYPTO_CRYPTD
+ help
+ GHASH is message digest algorithm for GCM (Galois/Counter Mode).
+ The implementation is accelerated by CLMUL-NI of Intel.
+
+comment "Ciphers"
+
+config CRYPTO_AES
+ tristate "AES cipher algorithms"
+ select CRYPTO_ALGAPI
+ help
+ AES cipher algorithms (FIPS-197). AES uses the Rijndael
+ algorithm.
+
+ Rijndael appears to be consistently a very good performer in
+ both hardware and software across a wide range of computing
+ environments regardless of its use in feedback or non-feedback
+ modes. Its key setup time is excellent, and its key agility is
+ good. Rijndael's very low memory requirements make it very well
+ suited for restricted-space environments, in which it also
+ demonstrates excellent performance. Rijndael's operations are
+ among the easiest to defend against power and timing attacks.
+
+ The AES specifies three key sizes: 128, 192 and 256 bits
+
+ See <http://csrc.nist.gov/CryptoToolkit/aes/> for more information.
+
+config CRYPTO_AES_586
+ tristate "AES cipher algorithms (i586)"
+ depends on (X86 || UML_X86) && !64BIT
+ select CRYPTO_ALGAPI
+ select CRYPTO_AES
+ help
+ AES cipher algorithms (FIPS-197). AES uses the Rijndael
+ algorithm.
+
+ Rijndael appears to be consistently a very good performer in
+ both hardware and software across a wide range of computing
+ environments regardless of its use in feedback or non-feedback
+ modes. Its key setup time is excellent, and its key agility is
+ good. Rijndael's very low memory requirements make it very well
+ suited for restricted-space environments, in which it also
+ demonstrates excellent performance. Rijndael's operations are
+ among the easiest to defend against power and timing attacks.
+
+ The AES specifies three key sizes: 128, 192 and 256 bits
+
+ See <http://csrc.nist.gov/encryption/aes/> for more information.
+
+config CRYPTO_AES_X86_64
+ tristate "AES cipher algorithms (x86_64)"
+ depends on (X86 || UML_X86) && 64BIT
+ select CRYPTO_ALGAPI
+ select CRYPTO_AES
+ help
+ AES cipher algorithms (FIPS-197). AES uses the Rijndael
+ algorithm.
+
+ Rijndael appears to be consistently a very good performer in
+ both hardware and software across a wide range of computing
+ environments regardless of its use in feedback or non-feedback
+ modes. Its key setup time is excellent, and its key agility is
+ good. Rijndael's very low memory requirements make it very well
+ suited for restricted-space environments, in which it also
+ demonstrates excellent performance. Rijndael's operations are
+ among the easiest to defend against power and timing attacks.
+
+ The AES specifies three key sizes: 128, 192 and 256 bits
+
+ See <http://csrc.nist.gov/encryption/aes/> for more information.
+
+config CRYPTO_AES_NI_INTEL
+ tristate "AES cipher algorithms (AES-NI)"
+ depends on X86
+ select CRYPTO_AES_X86_64 if 64BIT
+ select CRYPTO_AES_586 if !64BIT
+ select CRYPTO_CRYPTD
+ select CRYPTO_ABLK_HELPER
+ select CRYPTO_ALGAPI
+ select CRYPTO_GLUE_HELPER_X86 if 64BIT
+ select CRYPTO_LRW
+ select CRYPTO_XTS
+ help
+ Use Intel AES-NI instructions for AES algorithm.
+
+ AES cipher algorithms (FIPS-197). AES uses the Rijndael
+ algorithm.
+
+ Rijndael appears to be consistently a very good performer in
+ both hardware and software across a wide range of computing
+ environments regardless of its use in feedback or non-feedback
+ modes. Its key setup time is excellent, and its key agility is
+ good. Rijndael's very low memory requirements make it very well
+ suited for restricted-space environments, in which it also
+ demonstrates excellent performance. Rijndael's operations are
+ among the easiest to defend against power and timing attacks.
+
+ The AES specifies three key sizes: 128, 192 and 256 bits
+
+ See <http://csrc.nist.gov/encryption/aes/> for more information.
+
+ In addition to AES cipher algorithm support, the acceleration
+ for some popular block cipher mode is supported too, including
+ ECB, CBC, LRW, PCBC, XTS. The 64 bit version has additional
+ acceleration for CTR.
+
+config CRYPTO_AES_SPARC64
+ tristate "AES cipher algorithms (SPARC64)"
+ depends on SPARC64
+ select CRYPTO_CRYPTD
+ select CRYPTO_ALGAPI
+ help
+ Use SPARC64 crypto opcodes for AES algorithm.
+
+ AES cipher algorithms (FIPS-197). AES uses the Rijndael
+ algorithm.
+
+ Rijndael appears to be consistently a very good performer in
+ both hardware and software across a wide range of computing
+ environments regardless of its use in feedback or non-feedback
+ modes. Its key setup time is excellent, and its key agility is
+ good. Rijndael's very low memory requirements make it very well
+ suited for restricted-space environments, in which it also
+ demonstrates excellent performance. Rijndael's operations are
+ among the easiest to defend against power and timing attacks.
+
+ The AES specifies three key sizes: 128, 192 and 256 bits
+
+ See <http://csrc.nist.gov/encryption/aes/> for more information.
+
+ In addition to AES cipher algorithm support, the acceleration
+ for some popular block cipher mode is supported too, including
+ ECB and CBC.
+
+config CRYPTO_AES_PPC_SPE
+ tristate "AES cipher algorithms (PPC SPE)"
+ depends on PPC && SPE
+ help
+ AES cipher algorithms (FIPS-197). Additionally the acceleration
+ for popular block cipher modes ECB, CBC, CTR and XTS is supported.
+ This module should only be used for low power (router) devices
+ without hardware AES acceleration (e.g. caam crypto). It reduces the
+ size of the AES tables from 16KB to 8KB + 256 bytes and mitigates
+ timining attacks. Nevertheless it might be not as secure as other
+ architecture specific assembler implementations that work on 1KB
+ tables or 256 bytes S-boxes.
+
+config CRYPTO_ANUBIS
+ tristate "Anubis cipher algorithm"
+ select CRYPTO_ALGAPI
+ help
+ Anubis cipher algorithm.
+
+ Anubis is a variable key length cipher which can use keys from
+ 128 bits to 320 bits in length. It was evaluated as a entrant
+ in the NESSIE competition.
+
+ See also:
+ <https://www.cosic.esat.kuleuven.be/nessie/reports/>
+ <http://www.larc.usp.br/~pbarreto/AnubisPage.html>
+
+config CRYPTO_ARC4
+ tristate "ARC4 cipher algorithm"
+ select CRYPTO_BLKCIPHER
+ help
+ ARC4 cipher algorithm.
+
+ ARC4 is a stream cipher using keys ranging from 8 bits to 2048
+ bits in length. This algorithm is required for driver-based
+ WEP, but it should not be for other purposes because of the
+ weakness of the algorithm.
+
+config CRYPTO_BLOWFISH
+ tristate "Blowfish cipher algorithm"
+ select CRYPTO_ALGAPI
+ select CRYPTO_BLOWFISH_COMMON
+ help
+ Blowfish cipher algorithm, by Bruce Schneier.
+
+ This is a variable key length cipher which can use keys from 32
+ bits to 448 bits in length. It's fast, simple and specifically
+ designed for use on "large microprocessors".
+
+ See also:
+ <http://www.schneier.com/blowfish.html>
+
+config CRYPTO_BLOWFISH_COMMON
+ tristate
+ help
+ Common parts of the Blowfish cipher algorithm shared by the
+ generic c and the assembler implementations.
+
+ See also:
+ <http://www.schneier.com/blowfish.html>
+
+config CRYPTO_BLOWFISH_X86_64
+ tristate "Blowfish cipher algorithm (x86_64)"
+ depends on X86 && 64BIT
+ select CRYPTO_ALGAPI
+ select CRYPTO_BLOWFISH_COMMON
+ help
+ Blowfish cipher algorithm (x86_64), by Bruce Schneier.
+
+ This is a variable key length cipher which can use keys from 32
+ bits to 448 bits in length. It's fast, simple and specifically
+ designed for use on "large microprocessors".
+
+ See also:
+ <http://www.schneier.com/blowfish.html>
+
+config CRYPTO_CAMELLIA
+ tristate "Camellia cipher algorithms"
+ depends on CRYPTO
+ select CRYPTO_ALGAPI
+ help
+ Camellia cipher algorithms module.
+
+ Camellia is a symmetric key block cipher developed jointly
+ at NTT and Mitsubishi Electric Corporation.
+
+ The Camellia specifies three key sizes: 128, 192 and 256 bits.
+
+ See also:
+ <https://info.isl.ntt.co.jp/crypt/eng/camellia/index_s.html>
+
+config CRYPTO_CAMELLIA_X86_64
+ tristate "Camellia cipher algorithm (x86_64)"
+ depends on X86 && 64BIT
+ depends on CRYPTO
+ select CRYPTO_ALGAPI
+ select CRYPTO_GLUE_HELPER_X86
+ select CRYPTO_LRW
+ select CRYPTO_XTS
+ help
+ Camellia cipher algorithm module (x86_64).
+
+ Camellia is a symmetric key block cipher developed jointly
+ at NTT and Mitsubishi Electric Corporation.
+
+ The Camellia specifies three key sizes: 128, 192 and 256 bits.
+
+ See also:
+ <https://info.isl.ntt.co.jp/crypt/eng/camellia/index_s.html>
+
+config CRYPTO_CAMELLIA_AESNI_AVX_X86_64
+ tristate "Camellia cipher algorithm (x86_64/AES-NI/AVX)"
+ depends on X86 && 64BIT
+ depends on CRYPTO
+ select CRYPTO_ALGAPI
+ select CRYPTO_CRYPTD
+ select CRYPTO_ABLK_HELPER
+ select CRYPTO_GLUE_HELPER_X86
+ select CRYPTO_CAMELLIA_X86_64
+ select CRYPTO_LRW
+ select CRYPTO_XTS
+ help
+ Camellia cipher algorithm module (x86_64/AES-NI/AVX).
+
+ Camellia is a symmetric key block cipher developed jointly
+ at NTT and Mitsubishi Electric Corporation.
+
+ The Camellia specifies three key sizes: 128, 192 and 256 bits.
+
+ See also:
+ <https://info.isl.ntt.co.jp/crypt/eng/camellia/index_s.html>
+
+config CRYPTO_CAMELLIA_AESNI_AVX2_X86_64
+ tristate "Camellia cipher algorithm (x86_64/AES-NI/AVX2)"
+ depends on X86 && 64BIT
+ depends on CRYPTO
+ select CRYPTO_ALGAPI
+ select CRYPTO_CRYPTD
+ select CRYPTO_ABLK_HELPER
+ select CRYPTO_GLUE_HELPER_X86
+ select CRYPTO_CAMELLIA_X86_64
+ select CRYPTO_CAMELLIA_AESNI_AVX_X86_64
+ select CRYPTO_LRW
+ select CRYPTO_XTS
+ help
+ Camellia cipher algorithm module (x86_64/AES-NI/AVX2).
+
+ Camellia is a symmetric key block cipher developed jointly
+ at NTT and Mitsubishi Electric Corporation.
+
+ The Camellia specifies three key sizes: 128, 192 and 256 bits.
+
+ See also:
+ <https://info.isl.ntt.co.jp/crypt/eng/camellia/index_s.html>
+
+config CRYPTO_CAMELLIA_SPARC64
+ tristate "Camellia cipher algorithm (SPARC64)"
+ depends on SPARC64
+ depends on CRYPTO
+ select CRYPTO_ALGAPI
+ help
+ Camellia cipher algorithm module (SPARC64).
+
+ Camellia is a symmetric key block cipher developed jointly
+ at NTT and Mitsubishi Electric Corporation.
+
+ The Camellia specifies three key sizes: 128, 192 and 256 bits.
+
+ See also:
+ <https://info.isl.ntt.co.jp/crypt/eng/camellia/index_s.html>
+
+config CRYPTO_CAST_COMMON
+ tristate
+ help
+ Common parts of the CAST cipher algorithms shared by the
+ generic c and the assembler implementations.
+
+config CRYPTO_CAST5
+ tristate "CAST5 (CAST-128) cipher algorithm"
+ select CRYPTO_ALGAPI
+ select CRYPTO_CAST_COMMON
+ help
+ The CAST5 encryption algorithm (synonymous with CAST-128) is
+ described in RFC2144.
+
+config CRYPTO_CAST5_AVX_X86_64
+ tristate "CAST5 (CAST-128) cipher algorithm (x86_64/AVX)"
+ depends on X86 && 64BIT
+ select CRYPTO_ALGAPI
+ select CRYPTO_CRYPTD
+ select CRYPTO_ABLK_HELPER
+ select CRYPTO_CAST_COMMON
+ select CRYPTO_CAST5
+ help
+ The CAST5 encryption algorithm (synonymous with CAST-128) is
+ described in RFC2144.
+
+ This module provides the Cast5 cipher algorithm that processes
+ sixteen blocks parallel using the AVX instruction set.
+
+config CRYPTO_CAST6
+ tristate "CAST6 (CAST-256) cipher algorithm"
+ select CRYPTO_ALGAPI
+ select CRYPTO_CAST_COMMON
+ help
+ The CAST6 encryption algorithm (synonymous with CAST-256) is
+ described in RFC2612.
+
+config CRYPTO_CAST6_AVX_X86_64
+ tristate "CAST6 (CAST-256) cipher algorithm (x86_64/AVX)"
+ depends on X86 && 64BIT
+ select CRYPTO_ALGAPI
+ select CRYPTO_CRYPTD
+ select CRYPTO_ABLK_HELPER
+ select CRYPTO_GLUE_HELPER_X86
+ select CRYPTO_CAST_COMMON
+ select CRYPTO_CAST6
+ select CRYPTO_LRW
+ select CRYPTO_XTS
+ help
+ The CAST6 encryption algorithm (synonymous with CAST-256) is
+ described in RFC2612.
+
+ This module provides the Cast6 cipher algorithm that processes
+ eight blocks parallel using the AVX instruction set.
+
+config CRYPTO_DES
+ tristate "DES and Triple DES EDE cipher algorithms"
+ select CRYPTO_ALGAPI
+ help
+ DES cipher algorithm (FIPS 46-2), and Triple DES EDE (FIPS 46-3).
+
+config CRYPTO_DES_SPARC64
+ tristate "DES and Triple DES EDE cipher algorithms (SPARC64)"
+ depends on SPARC64
+ select CRYPTO_ALGAPI
+ select CRYPTO_DES
+ help
+ DES cipher algorithm (FIPS 46-2), and Triple DES EDE (FIPS 46-3),
+ optimized using SPARC64 crypto opcodes.
+
+config CRYPTO_DES3_EDE_X86_64
+ tristate "Triple DES EDE cipher algorithm (x86-64)"
+ depends on X86 && 64BIT
+ select CRYPTO_ALGAPI
+ select CRYPTO_DES
+ help
+ Triple DES EDE (FIPS 46-3) algorithm.
+
+ This module provides implementation of the Triple DES EDE cipher
+ algorithm that is optimized for x86-64 processors. Two versions of
+ algorithm are provided; regular processing one input block and
+ one that processes three blocks parallel.
+
+config CRYPTO_FCRYPT
+ tristate "FCrypt cipher algorithm"
+ select CRYPTO_ALGAPI
+ select CRYPTO_BLKCIPHER
+ help
+ FCrypt algorithm used by RxRPC.
+
+config CRYPTO_KHAZAD
+ tristate "Khazad cipher algorithm"
+ select CRYPTO_ALGAPI
+ help
+ Khazad cipher algorithm.
+
+ Khazad was a finalist in the initial NESSIE competition. It is
+ an algorithm optimized for 64-bit processors with good performance
+ on 32-bit processors. Khazad uses an 128 bit key size.
+
+ See also:
+ <http://www.larc.usp.br/~pbarreto/KhazadPage.html>
+
+config CRYPTO_SALSA20
+ tristate "Salsa20 stream cipher algorithm"
+ select CRYPTO_BLKCIPHER
+ help
+ Salsa20 stream cipher algorithm.
+
+ Salsa20 is a stream cipher submitted to eSTREAM, the ECRYPT
+ Stream Cipher Project. See <http://www.ecrypt.eu.org/stream/>
+
+ The Salsa20 stream cipher algorithm is designed by Daniel J.
+ Bernstein <djb@cr.yp.to>. See <http://cr.yp.to/snuffle.html>
+
+config CRYPTO_SALSA20_586
+ tristate "Salsa20 stream cipher algorithm (i586)"
+ depends on (X86 || UML_X86) && !64BIT
+ select CRYPTO_BLKCIPHER
+ help
+ Salsa20 stream cipher algorithm.
+
+ Salsa20 is a stream cipher submitted to eSTREAM, the ECRYPT
+ Stream Cipher Project. See <http://www.ecrypt.eu.org/stream/>
+
+ The Salsa20 stream cipher algorithm is designed by Daniel J.
+ Bernstein <djb@cr.yp.to>. See <http://cr.yp.to/snuffle.html>
+
+config CRYPTO_SALSA20_X86_64
+ tristate "Salsa20 stream cipher algorithm (x86_64)"
+ depends on (X86 || UML_X86) && 64BIT
+ select CRYPTO_BLKCIPHER
+ help
+ Salsa20 stream cipher algorithm.
+
+ Salsa20 is a stream cipher submitted to eSTREAM, the ECRYPT
+ Stream Cipher Project. See <http://www.ecrypt.eu.org/stream/>
+
+ The Salsa20 stream cipher algorithm is designed by Daniel J.
+ Bernstein <djb@cr.yp.to>. See <http://cr.yp.to/snuffle.html>
+
+config CRYPTO_SEED
+ tristate "SEED cipher algorithm"
+ select CRYPTO_ALGAPI
+ help
+ SEED cipher algorithm (RFC4269).
+
+ SEED is a 128-bit symmetric key block cipher that has been
+ developed by KISA (Korea Information Security Agency) as a
+ national standard encryption algorithm of the Republic of Korea.
+ It is a 16 round block cipher with the key size of 128 bit.
+
+ See also:
+ <http://www.kisa.or.kr/kisa/seed/jsp/seed_eng.jsp>
+
+config CRYPTO_SERPENT
+ tristate "Serpent cipher algorithm"
+ select CRYPTO_ALGAPI
+ help
+ Serpent cipher algorithm, by Anderson, Biham & Knudsen.
+
+ Keys are allowed to be from 0 to 256 bits in length, in steps
+ of 8 bits. Also includes the 'Tnepres' algorithm, a reversed
+ variant of Serpent for compatibility with old kerneli.org code.
+
+ See also:
+ <http://www.cl.cam.ac.uk/~rja14/serpent.html>
+
+config CRYPTO_SERPENT_SSE2_X86_64
+ tristate "Serpent cipher algorithm (x86_64/SSE2)"
+ depends on X86 && 64BIT
+ select CRYPTO_ALGAPI
+ select CRYPTO_CRYPTD
+ select CRYPTO_ABLK_HELPER
+ select CRYPTO_GLUE_HELPER_X86
+ select CRYPTO_SERPENT
+ select CRYPTO_LRW
+ select CRYPTO_XTS
+ help
+ Serpent cipher algorithm, by Anderson, Biham & Knudsen.
+
+ Keys are allowed to be from 0 to 256 bits in length, in steps
+ of 8 bits.
+
+ This module provides Serpent cipher algorithm that processes eight
+ blocks parallel using SSE2 instruction set.
+
+ See also:
+ <http://www.cl.cam.ac.uk/~rja14/serpent.html>
+
+config CRYPTO_SERPENT_SSE2_586
+ tristate "Serpent cipher algorithm (i586/SSE2)"
+ depends on X86 && !64BIT
+ select CRYPTO_ALGAPI
+ select CRYPTO_CRYPTD
+ select CRYPTO_ABLK_HELPER
+ select CRYPTO_GLUE_HELPER_X86
+ select CRYPTO_SERPENT
+ select CRYPTO_LRW
+ select CRYPTO_XTS
+ help
+ Serpent cipher algorithm, by Anderson, Biham & Knudsen.
+
+ Keys are allowed to be from 0 to 256 bits in length, in steps
+ of 8 bits.
+
+ This module provides Serpent cipher algorithm that processes four
+ blocks parallel using SSE2 instruction set.
+
+ See also:
+ <http://www.cl.cam.ac.uk/~rja14/serpent.html>
+
+config CRYPTO_SERPENT_AVX_X86_64
+ tristate "Serpent cipher algorithm (x86_64/AVX)"
+ depends on X86 && 64BIT
+ select CRYPTO_ALGAPI
+ select CRYPTO_CRYPTD
+ select CRYPTO_ABLK_HELPER
+ select CRYPTO_GLUE_HELPER_X86
+ select CRYPTO_SERPENT
+ select CRYPTO_LRW
+ select CRYPTO_XTS
+ help
+ Serpent cipher algorithm, by Anderson, Biham & Knudsen.
+
+ Keys are allowed to be from 0 to 256 bits in length, in steps
+ of 8 bits.
+
+ This module provides the Serpent cipher algorithm that processes
+ eight blocks parallel using the AVX instruction set.
+
+ See also:
+ <http://www.cl.cam.ac.uk/~rja14/serpent.html>
+
+config CRYPTO_SERPENT_AVX2_X86_64
+ tristate "Serpent cipher algorithm (x86_64/AVX2)"
+ depends on X86 && 64BIT
+ select CRYPTO_ALGAPI
+ select CRYPTO_CRYPTD
+ select CRYPTO_ABLK_HELPER
+ select CRYPTO_GLUE_HELPER_X86
+ select CRYPTO_SERPENT
+ select CRYPTO_SERPENT_AVX_X86_64
+ select CRYPTO_LRW
+ select CRYPTO_XTS
+ help
+ Serpent cipher algorithm, by Anderson, Biham & Knudsen.
+
+ Keys are allowed to be from 0 to 256 bits in length, in steps
+ of 8 bits.
+
+ This module provides Serpent cipher algorithm that processes 16
+ blocks parallel using AVX2 instruction set.
+
+ See also:
+ <http://www.cl.cam.ac.uk/~rja14/serpent.html>
+
+config CRYPTO_TEA
+ tristate "TEA, XTEA and XETA cipher algorithms"
+ select CRYPTO_ALGAPI
+ help
+ TEA cipher algorithm.
+
+ Tiny Encryption Algorithm is a simple cipher that uses
+ many rounds for security. It is very fast and uses
+ little memory.
+
+ Xtendend Tiny Encryption Algorithm is a modification to
+ the TEA algorithm to address a potential key weakness
+ in the TEA algorithm.
+
+ Xtendend Encryption Tiny Algorithm is a mis-implementation
+ of the XTEA algorithm for compatibility purposes.
+
+config CRYPTO_TWOFISH
+ tristate "Twofish cipher algorithm"
+ select CRYPTO_ALGAPI
+ select CRYPTO_TWOFISH_COMMON
+ help
+ Twofish cipher algorithm.
+
+ Twofish was submitted as an AES (Advanced Encryption Standard)
+ candidate cipher by researchers at CounterPane Systems. It is a
+ 16 round block cipher supporting key sizes of 128, 192, and 256
+ bits.
+
+ See also:
+ <http://www.schneier.com/twofish.html>
+
+config CRYPTO_TWOFISH_COMMON
+ tristate
+ help
+ Common parts of the Twofish cipher algorithm shared by the
+ generic c and the assembler implementations.
+
+config CRYPTO_TWOFISH_586
+ tristate "Twofish cipher algorithms (i586)"
+ depends on (X86 || UML_X86) && !64BIT
+ select CRYPTO_ALGAPI
+ select CRYPTO_TWOFISH_COMMON
+ help
+ Twofish cipher algorithm.
+
+ Twofish was submitted as an AES (Advanced Encryption Standard)
+ candidate cipher by researchers at CounterPane Systems. It is a
+ 16 round block cipher supporting key sizes of 128, 192, and 256
+ bits.
+
+ See also:
+ <http://www.schneier.com/twofish.html>
+
+config CRYPTO_TWOFISH_X86_64
+ tristate "Twofish cipher algorithm (x86_64)"
+ depends on (X86 || UML_X86) && 64BIT
+ select CRYPTO_ALGAPI
+ select CRYPTO_TWOFISH_COMMON
+ help
+ Twofish cipher algorithm (x86_64).
+
+ Twofish was submitted as an AES (Advanced Encryption Standard)
+ candidate cipher by researchers at CounterPane Systems. It is a
+ 16 round block cipher supporting key sizes of 128, 192, and 256
+ bits.
+
+ See also:
+ <http://www.schneier.com/twofish.html>
+
+config CRYPTO_TWOFISH_X86_64_3WAY
+ tristate "Twofish cipher algorithm (x86_64, 3-way parallel)"
+ depends on X86 && 64BIT
+ select CRYPTO_ALGAPI
+ select CRYPTO_TWOFISH_COMMON
+ select CRYPTO_TWOFISH_X86_64
+ select CRYPTO_GLUE_HELPER_X86
+ select CRYPTO_LRW
+ select CRYPTO_XTS
+ help
+ Twofish cipher algorithm (x86_64, 3-way parallel).
+
+ Twofish was submitted as an AES (Advanced Encryption Standard)
+ candidate cipher by researchers at CounterPane Systems. It is a
+ 16 round block cipher supporting key sizes of 128, 192, and 256
+ bits.
+
+ This module provides Twofish cipher algorithm that processes three
+ blocks parallel, utilizing resources of out-of-order CPUs better.
+
+ See also:
+ <http://www.schneier.com/twofish.html>
+
+config CRYPTO_TWOFISH_AVX_X86_64
+ tristate "Twofish cipher algorithm (x86_64/AVX)"
+ depends on X86 && 64BIT
+ select CRYPTO_ALGAPI
+ select CRYPTO_CRYPTD
+ select CRYPTO_ABLK_HELPER
+ select CRYPTO_GLUE_HELPER_X86
+ select CRYPTO_TWOFISH_COMMON
+ select CRYPTO_TWOFISH_X86_64
+ select CRYPTO_TWOFISH_X86_64_3WAY
+ select CRYPTO_LRW
+ select CRYPTO_XTS
+ help
+ Twofish cipher algorithm (x86_64/AVX).
+
+ Twofish was submitted as an AES (Advanced Encryption Standard)
+ candidate cipher by researchers at CounterPane Systems. It is a
+ 16 round block cipher supporting key sizes of 128, 192, and 256
+ bits.
+
+ This module provides the Twofish cipher algorithm that processes
+ eight blocks parallel using the AVX Instruction Set.
+
+ See also:
+ <http://www.schneier.com/twofish.html>
+
+comment "Compression"
+
+config CRYPTO_DEFLATE
+ tristate "Deflate compression algorithm"
+ select CRYPTO_ALGAPI
+ select ZLIB_INFLATE
+ select ZLIB_DEFLATE
+ help
+ This is the Deflate algorithm (RFC1951), specified for use in
+ IPSec with the IPCOMP protocol (RFC3173, RFC2394).
+
+ You will most probably want this if using IPSec.
+
+config CRYPTO_ZLIB
+ tristate "Zlib compression algorithm"
+ select CRYPTO_PCOMP
+ select ZLIB_INFLATE
+ select ZLIB_DEFLATE
+ select NLATTR
+ help
+ This is the zlib algorithm.
+
+config CRYPTO_LZO
+ tristate "LZO compression algorithm"
+ select CRYPTO_ALGAPI
+ select LZO_COMPRESS
+ select LZO_DECOMPRESS
+ help
+ This is the LZO algorithm.
+
+config CRYPTO_842
+ tristate "842 compression algorithm"
+ depends on CRYPTO_DEV_NX_COMPRESS
+ # 842 uses lzo if the hardware becomes unavailable
+ select LZO_COMPRESS
+ select LZO_DECOMPRESS
+ help
+ This is the 842 algorithm.
+
+config CRYPTO_LZ4
+ tristate "LZ4 compression algorithm"
+ select CRYPTO_ALGAPI
+ select LZ4_COMPRESS
+ select LZ4_DECOMPRESS
+ help
+ This is the LZ4 algorithm.
+
+config CRYPTO_LZ4HC
+ tristate "LZ4HC compression algorithm"
+ select CRYPTO_ALGAPI
+ select LZ4HC_COMPRESS
+ select LZ4_DECOMPRESS
+ help
+ This is the LZ4 high compression mode algorithm.
+
+comment "Random Number Generation"
+
+config CRYPTO_ANSI_CPRNG
+ tristate "Pseudo Random Number Generation for Cryptographic modules"
+ default m
+ select CRYPTO_AES
+ select CRYPTO_RNG
+ help
+ This option enables the generic pseudo random number generator
+ for cryptographic modules. Uses the Algorithm specified in
+ ANSI X9.31 A.2.4. Note that this option must be enabled if
+ CRYPTO_FIPS is selected
+
+menuconfig CRYPTO_DRBG_MENU
+ tristate "NIST SP800-90A DRBG"
+ help
+ NIST SP800-90A compliant DRBG. In the following submenu, one or
+ more of the DRBG types must be selected.
+
+if CRYPTO_DRBG_MENU
+
+config CRYPTO_DRBG_HMAC
+ bool "Enable HMAC DRBG"
+ default y
+ select CRYPTO_HMAC
+ help
+ Enable the HMAC DRBG variant as defined in NIST SP800-90A.
+
+config CRYPTO_DRBG_HASH
+ bool "Enable Hash DRBG"
+ select CRYPTO_HASH
+ help
+ Enable the Hash DRBG variant as defined in NIST SP800-90A.
+
+config CRYPTO_DRBG_CTR
+ bool "Enable CTR DRBG"
+ select CRYPTO_AES
+ help
+ Enable the CTR DRBG variant as defined in NIST SP800-90A.
+
+config CRYPTO_DRBG
+ tristate
+ default CRYPTO_DRBG_MENU if (CRYPTO_DRBG_HMAC || CRYPTO_DRBG_HASH || CRYPTO_DRBG_CTR)
+ select CRYPTO_RNG
+
+endif # if CRYPTO_DRBG_MENU
+
+config CRYPTO_USER_API
+ tristate
+
+config CRYPTO_USER_API_HASH
+ tristate "User-space interface for hash algorithms"
+ depends on NET
+ select CRYPTO_HASH
+ select CRYPTO_USER_API
+ help
+ This option enables the user-spaces interface for hash
+ algorithms.
+
+config CRYPTO_USER_API_SKCIPHER
+ tristate "User-space interface for symmetric key cipher algorithms"
+ depends on NET
+ select CRYPTO_BLKCIPHER
+ select CRYPTO_USER_API
+ help
+ This option enables the user-spaces interface for symmetric
+ key cipher algorithms.
+
+config CRYPTO_USER_API_RNG
+ tristate "User-space interface for random number generator algorithms"
+ depends on NET
+ select CRYPTO_RNG
+ select CRYPTO_USER_API
+ help
+ This option enables the user-spaces interface for random
+ number generator algorithms.
+
+config CRYPTO_HASH_INFO
+ bool
+
+source "drivers/crypto/Kconfig"
+source crypto/asymmetric_keys/Kconfig
+
+endif # if CRYPTO
Code Review / kvmfornfv.git / blobdiff