--- /dev/null
+/*
+ *
+ * arch/xtensa/platform/xtavnet/setup.c
+ *
+ * ...
+ *
+ * Authors: Chris Zankel <chris@zankel.net>
+ * Joe Taylor <joe@tensilica.com>
+ *
+ * Copyright 2001 - 2006 Tensilica Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/kdev_t.h>
+#include <linux/types.h>
+#include <linux/major.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/of.h>
+
+#include <asm/timex.h>
+#include <asm/processor.h>
+#include <asm/platform.h>
+#include <asm/bootparam.h>
+#include <platform/lcd.h>
+#include <platform/hardware.h>
+
+void platform_halt(void)
+{
+ lcd_disp_at_pos(" HALT ", 0);
+ local_irq_disable();
+ while (1)
+ cpu_relax();
+}
+
+void platform_power_off(void)
+{
+ lcd_disp_at_pos("POWEROFF", 0);
+ local_irq_disable();
+ while (1)
+ cpu_relax();
+}
+
+void platform_restart(void)
+{
+ /* Flush and reset the mmu, simulate a processor reset, and
+ * jump to the reset vector. */
+
+
+ __asm__ __volatile__ ("movi a2, 15\n\t"
+ "wsr a2, icountlevel\n\t"
+ "movi a2, 0\n\t"
+ "wsr a2, icount\n\t"
+#if XCHAL_NUM_IBREAK > 0
+ "wsr a2, ibreakenable\n\t"
+#endif
+ "wsr a2, lcount\n\t"
+ "movi a2, 0x1f\n\t"
+ "wsr a2, ps\n\t"
+ "isync\n\t"
+ "jx %0\n\t"
+ :
+ : "a" (XCHAL_RESET_VECTOR_VADDR)
+ : "a2"
+ );
+
+ /* control never gets here */
+}
+
+void __init platform_setup(char **cmdline)
+{
+}
+
+#ifdef CONFIG_OF
+
+static void __init update_clock_frequency(struct device_node *node)
+{
+ struct property *newfreq;
+ u32 freq;
+
+ if (!of_property_read_u32(node, "clock-frequency", &freq) && freq != 0)
+ return;
+
+ newfreq = kzalloc(sizeof(*newfreq) + sizeof(u32), GFP_KERNEL);
+ if (!newfreq)
+ return;
+ newfreq->value = newfreq + 1;
+ newfreq->length = sizeof(freq);
+ newfreq->name = kstrdup("clock-frequency", GFP_KERNEL);
+ if (!newfreq->name) {
+ kfree(newfreq);
+ return;
+ }
+
+ *(u32 *)newfreq->value = cpu_to_be32(*(u32 *)XTFPGA_CLKFRQ_VADDR);
+ of_update_property(node, newfreq);
+}
+
+#define MAC_LEN 6
+static void __init update_local_mac(struct device_node *node)
+{
+ struct property *newmac;
+ const u8* macaddr;
+ int prop_len;
+
+ macaddr = of_get_property(node, "local-mac-address", &prop_len);
+ if (macaddr == NULL || prop_len != MAC_LEN)
+ return;
+
+ newmac = kzalloc(sizeof(*newmac) + MAC_LEN, GFP_KERNEL);
+ if (newmac == NULL)
+ return;
+
+ newmac->value = newmac + 1;
+ newmac->length = MAC_LEN;
+ newmac->name = kstrdup("local-mac-address", GFP_KERNEL);
+ if (newmac->name == NULL) {
+ kfree(newmac);
+ return;
+ }
+
+ memcpy(newmac->value, macaddr, MAC_LEN);
+ ((u8*)newmac->value)[5] = (*(u32*)DIP_SWITCHES_VADDR) & 0x3f;
+ of_update_property(node, newmac);
+}
+
+static int __init machine_setup(void)
+{
+ struct device_node *clock;
+ struct device_node *eth = NULL;
+
+ for_each_node_by_name(clock, "main-oscillator")
+ update_clock_frequency(clock);
+
+ if ((eth = of_find_compatible_node(eth, NULL, "opencores,ethoc")))
+ update_local_mac(eth);
+ return 0;
+}
+arch_initcall(machine_setup);
+
+#endif
+
+/* early initialization */
+
+void __init platform_init(bp_tag_t *first)
+{
+}
+
+/* Heartbeat. */
+
+void platform_heartbeat(void)
+{
+}
+
+#ifdef CONFIG_XTENSA_CALIBRATE_CCOUNT
+
+void __init platform_calibrate_ccount(void)
+{
+ long clk_freq = 0;
+#ifdef CONFIG_OF
+ struct device_node *cpu =
+ of_find_compatible_node(NULL, NULL, "cdns,xtensa-cpu");
+ if (cpu) {
+ u32 freq;
+ update_clock_frequency(cpu);
+ if (!of_property_read_u32(cpu, "clock-frequency", &freq))
+ clk_freq = freq;
+ }
+#endif
+ if (!clk_freq)
+ clk_freq = *(long *)XTFPGA_CLKFRQ_VADDR;
+
+ ccount_freq = clk_freq;
+}
+
+#endif
+
+#ifndef CONFIG_OF
+
+#include <linux/serial_8250.h>
+#include <linux/if.h>
+#include <net/ethoc.h>
+#include <linux/usb/c67x00.h>
+
+/*----------------------------------------------------------------------------
+ * Ethernet -- OpenCores Ethernet MAC (ethoc driver)
+ */
+
+static struct resource ethoc_res[] = {
+ [0] = { /* register space */
+ .start = OETH_REGS_PADDR,
+ .end = OETH_REGS_PADDR + OETH_REGS_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = { /* buffer space */
+ .start = OETH_SRAMBUFF_PADDR,
+ .end = OETH_SRAMBUFF_PADDR + OETH_SRAMBUFF_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = { /* IRQ number */
+ .start = OETH_IRQ,
+ .end = OETH_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct ethoc_platform_data ethoc_pdata = {
+ /*
+ * The MAC address for these boards is 00:50:c2:13:6f:xx.
+ * The last byte (here as zero) is read from the DIP switches on the
+ * board.
+ */
+ .hwaddr = { 0x00, 0x50, 0xc2, 0x13, 0x6f, 0 },
+ .phy_id = -1,
+};
+
+static struct platform_device ethoc_device = {
+ .name = "ethoc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(ethoc_res),
+ .resource = ethoc_res,
+ .dev = {
+ .platform_data = ðoc_pdata,
+ },
+};
+
+/*----------------------------------------------------------------------------
+ * USB Host/Device -- Cypress CY7C67300
+ */
+
+static struct resource c67x00_res[] = {
+ [0] = { /* register space */
+ .start = C67X00_PADDR,
+ .end = C67X00_PADDR + C67X00_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = { /* IRQ number */
+ .start = C67X00_IRQ,
+ .end = C67X00_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct c67x00_platform_data c67x00_pdata = {
+ .sie_config = C67X00_SIE1_HOST | C67X00_SIE2_UNUSED,
+ .hpi_regstep = 4,
+};
+
+static struct platform_device c67x00_device = {
+ .name = "c67x00",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(c67x00_res),
+ .resource = c67x00_res,
+ .dev = {
+ .platform_data = &c67x00_pdata,
+ },
+};
+
+/*----------------------------------------------------------------------------
+ * UART
+ */
+
+static struct resource serial_resource = {
+ .start = DUART16552_PADDR,
+ .end = DUART16552_PADDR + 0x1f,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct plat_serial8250_port serial_platform_data[] = {
+ [0] = {
+ .mapbase = DUART16552_PADDR,
+ .irq = DUART16552_INTNUM,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+ UPF_IOREMAP,
+ .iotype = UPIO_MEM32,
+ .regshift = 2,
+ .uartclk = 0, /* set in xtavnet_init() */
+ },
+ { },
+};
+
+static struct platform_device xtavnet_uart = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = serial_platform_data,
+ },
+ .num_resources = 1,
+ .resource = &serial_resource,
+};
+
+/* platform devices */
+static struct platform_device *platform_devices[] __initdata = {
+ ðoc_device,
+ &c67x00_device,
+ &xtavnet_uart,
+};
+
+
+static int __init xtavnet_init(void)
+{
+ /* Ethernet MAC address. */
+ ethoc_pdata.hwaddr[5] = *(u32 *)DIP_SWITCHES_VADDR;
+
+ /* Clock rate varies among FPGA bitstreams; board specific FPGA register
+ * reports the actual clock rate.
+ */
+ serial_platform_data[0].uartclk = *(long *)XTFPGA_CLKFRQ_VADDR;
+
+
+ /* register platform devices */
+ platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+
+ /* ETHOC driver is a bit quiet; at least display Ethernet MAC, so user
+ * knows whether they set it correctly on the DIP switches.
+ */
+ pr_info("XTFPGA: Ethernet MAC %pM\n", ethoc_pdata.hwaddr);
+ ethoc_pdata.eth_clkfreq = *(long *)XTFPGA_CLKFRQ_VADDR;
+
+ return 0;
+}
+
+/*
+ * Register to be done during do_initcalls().
+ */
+arch_initcall(xtavnet_init);
+
+#endif /* CONFIG_OF */
Code Review / kvmfornfv.git / blobdiff