--- /dev/null
+/*
+ * Copyright 2012 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/mmzone.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/capability.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/irq.h>
+#include <linux/msi.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+#include <linux/ctype.h>
+
+#include <asm/processor.h>
+#include <asm/sections.h>
+#include <asm/byteorder.h>
+
+#include <gxio/iorpc_globals.h>
+#include <gxio/kiorpc.h>
+#include <gxio/trio.h>
+#include <gxio/iorpc_trio.h>
+#include <hv/drv_trio_intf.h>
+
+#include <arch/sim.h>
+
+/*
+ * This file containes the routines to search for PCI buses,
+ * enumerate the buses, and configure any attached devices.
+ */
+
+#define DEBUG_PCI_CFG 0
+
+#if DEBUG_PCI_CFG
+#define TRACE_CFG_WR(size, val, bus, dev, func, offset) \
+ pr_info("CFG WR %d-byte VAL %#x to bus %d dev %d func %d addr %u\n", \
+ size, val, bus, dev, func, offset & 0xFFF);
+#define TRACE_CFG_RD(size, val, bus, dev, func, offset) \
+ pr_info("CFG RD %d-byte VAL %#x from bus %d dev %d func %d addr %u\n", \
+ size, val, bus, dev, func, offset & 0xFFF);
+#else
+#define TRACE_CFG_WR(...)
+#define TRACE_CFG_RD(...)
+#endif
+
+static int pci_probe = 1;
+
+/* Information on the PCIe RC ports configuration. */
+static int pcie_rc[TILEGX_NUM_TRIO][TILEGX_TRIO_PCIES];
+
+/*
+ * On some platforms with one or more Gx endpoint ports, we need to
+ * delay the PCIe RC port probe for a few seconds to work around
+ * a HW PCIe link-training bug. The exact delay is specified with
+ * a kernel boot argument in the form of "pcie_rc_delay=T,P,S",
+ * where T is the TRIO instance number, P is the port number and S is
+ * the delay in seconds. If the argument is specified, but the delay is
+ * not provided, the value will be DEFAULT_RC_DELAY.
+ */
+static int rc_delay[TILEGX_NUM_TRIO][TILEGX_TRIO_PCIES];
+
+/* Default number of seconds that the PCIe RC port probe can be delayed. */
+#define DEFAULT_RC_DELAY 10
+
+/* The PCI I/O space size in each PCI domain. */
+#define IO_SPACE_SIZE 0x10000
+
+/* Provide shorter versions of some very long constant names. */
+#define AUTO_CONFIG_RC \
+ TRIO_PCIE_INTFC_PORT_CONFIG__STRAP_STATE_VAL_AUTO_CONFIG_RC
+#define AUTO_CONFIG_RC_G1 \
+ TRIO_PCIE_INTFC_PORT_CONFIG__STRAP_STATE_VAL_AUTO_CONFIG_RC_G1
+#define AUTO_CONFIG_EP \
+ TRIO_PCIE_INTFC_PORT_CONFIG__STRAP_STATE_VAL_AUTO_CONFIG_ENDPOINT
+#define AUTO_CONFIG_EP_G1 \
+ TRIO_PCIE_INTFC_PORT_CONFIG__STRAP_STATE_VAL_AUTO_CONFIG_ENDPOINT_G1
+
+/* Array of the PCIe ports configuration info obtained from the BIB. */
+struct pcie_trio_ports_property pcie_ports[TILEGX_NUM_TRIO];
+
+/* Number of configured TRIO instances. */
+int num_trio_shims;
+
+/* All drivers share the TRIO contexts defined here. */
+gxio_trio_context_t trio_contexts[TILEGX_NUM_TRIO];
+
+/* Pointer to an array of PCIe RC controllers. */
+struct pci_controller pci_controllers[TILEGX_NUM_TRIO * TILEGX_TRIO_PCIES];
+int num_rc_controllers;
+
+static struct pci_ops tile_cfg_ops;
+
+/* Mask of CPUs that should receive PCIe interrupts. */
+static struct cpumask intr_cpus_map;
+
+/* We don't need to worry about the alignment of resources. */
+resource_size_t pcibios_align_resource(void *data, const struct resource *res,
+ resource_size_t size,
+ resource_size_t align)
+{
+ return res->start;
+}
+EXPORT_SYMBOL(pcibios_align_resource);
+
+/*
+ * Pick a CPU to receive and handle the PCIe interrupts, based on the IRQ #.
+ * For now, we simply send interrupts to non-dataplane CPUs.
+ * We may implement methods to allow user to specify the target CPUs,
+ * e.g. via boot arguments.
+ */
+static int tile_irq_cpu(int irq)
+{
+ unsigned int count;
+ int i = 0;
+ int cpu;
+
+ count = cpumask_weight(&intr_cpus_map);
+ if (unlikely(count == 0)) {
+ pr_warn("intr_cpus_map empty, interrupts will be delievered to dataplane tiles\n");
+ return irq % (smp_height * smp_width);
+ }
+
+ count = irq % count;
+ for_each_cpu(cpu, &intr_cpus_map) {
+ if (i++ == count)
+ break;
+ }
+ return cpu;
+}
+
+/* Open a file descriptor to the TRIO shim. */
+static int tile_pcie_open(int trio_index)
+{
+ gxio_trio_context_t *context = &trio_contexts[trio_index];
+ int ret;
+ int mac;
+
+ /* This opens a file descriptor to the TRIO shim. */
+ ret = gxio_trio_init(context, trio_index);
+ if (ret < 0)
+ goto gxio_trio_init_failure;
+
+ /* Allocate an ASID for the kernel. */
+ ret = gxio_trio_alloc_asids(context, 1, 0, 0);
+ if (ret < 0) {
+ pr_err("PCI: ASID alloc failure on TRIO %d, give up\n",
+ trio_index);
+ goto asid_alloc_failure;
+ }
+
+ context->asid = ret;
+
+#ifdef USE_SHARED_PCIE_CONFIG_REGION
+ /*
+ * Alloc a PIO region for config access, shared by all MACs per TRIO.
+ * This shouldn't fail since the kernel is supposed to the first
+ * client of the TRIO's PIO regions.
+ */
+ ret = gxio_trio_alloc_pio_regions(context, 1, 0, 0);
+ if (ret < 0) {
+ pr_err("PCI: CFG PIO alloc failure on TRIO %d, give up\n",
+ trio_index);
+ goto pio_alloc_failure;
+ }
+
+ context->pio_cfg_index = ret;
+
+ /*
+ * For PIO CFG, the bus_address_hi parameter is 0. The mac parameter
+ * is also 0 because it is specified in PIO_REGION_SETUP_CFG_ADDR.
+ */
+ ret = gxio_trio_init_pio_region_aux(context, context->pio_cfg_index,
+ 0, 0, HV_TRIO_PIO_FLAG_CONFIG_SPACE);
+ if (ret < 0) {
+ pr_err("PCI: CFG PIO init failure on TRIO %d, give up\n",
+ trio_index);
+ goto pio_alloc_failure;
+ }
+#endif
+
+ /* Get the properties of the PCIe ports on this TRIO instance. */
+ ret = gxio_trio_get_port_property(context, &pcie_ports[trio_index]);
+ if (ret < 0) {
+ pr_err("PCI: PCIE_GET_PORT_PROPERTY failure, error %d, on TRIO %d\n",
+ ret, trio_index);
+ goto get_port_property_failure;
+ }
+
+ context->mmio_base_mac =
+ iorpc_ioremap(context->fd, 0, HV_TRIO_CONFIG_IOREMAP_SIZE);
+ if (context->mmio_base_mac == NULL) {
+ pr_err("PCI: TRIO config space mapping failure, error %d, on TRIO %d\n",
+ ret, trio_index);
+ ret = -ENOMEM;
+
+ goto trio_mmio_mapping_failure;
+ }
+
+ /* Check the port strap state which will override the BIB setting. */
+ for (mac = 0; mac < TILEGX_TRIO_PCIES; mac++) {
+ TRIO_PCIE_INTFC_PORT_CONFIG_t port_config;
+ unsigned int reg_offset;
+
+ /* Ignore ports that are not specified in the BIB. */
+ if (!pcie_ports[trio_index].ports[mac].allow_rc &&
+ !pcie_ports[trio_index].ports[mac].allow_ep)
+ continue;
+
+ reg_offset =
+ (TRIO_PCIE_INTFC_PORT_CONFIG <<
+ TRIO_CFG_REGION_ADDR__REG_SHIFT) |
+ (TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_INTERFACE <<
+ TRIO_CFG_REGION_ADDR__INTFC_SHIFT) |
+ (mac << TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT);
+
+ port_config.word =
+ __gxio_mmio_read(context->mmio_base_mac + reg_offset);
+
+ if (port_config.strap_state != AUTO_CONFIG_RC &&
+ port_config.strap_state != AUTO_CONFIG_RC_G1) {
+ /*
+ * If this is really intended to be an EP port, record
+ * it so that the endpoint driver will know about it.
+ */
+ if (port_config.strap_state == AUTO_CONFIG_EP ||
+ port_config.strap_state == AUTO_CONFIG_EP_G1)
+ pcie_ports[trio_index].ports[mac].allow_ep = 1;
+ }
+ }
+
+ return ret;
+
+trio_mmio_mapping_failure:
+get_port_property_failure:
+asid_alloc_failure:
+#ifdef USE_SHARED_PCIE_CONFIG_REGION
+pio_alloc_failure:
+#endif
+ hv_dev_close(context->fd);
+gxio_trio_init_failure:
+ context->fd = -1;
+
+ return ret;
+}
+
+static int __init tile_trio_init(void)
+{
+ int i;
+
+ /* We loop over all the TRIO shims. */
+ for (i = 0; i < TILEGX_NUM_TRIO; i++) {
+ if (tile_pcie_open(i) < 0)
+ continue;
+ num_trio_shims++;
+ }
+
+ return 0;
+}
+postcore_initcall(tile_trio_init);
+
+static void tilegx_legacy_irq_ack(struct irq_data *d)
+{
+ __insn_mtspr(SPR_IPI_EVENT_RESET_K, 1UL << d->irq);
+}
+
+static void tilegx_legacy_irq_mask(struct irq_data *d)
+{
+ __insn_mtspr(SPR_IPI_MASK_SET_K, 1UL << d->irq);
+}
+
+static void tilegx_legacy_irq_unmask(struct irq_data *d)
+{
+ __insn_mtspr(SPR_IPI_MASK_RESET_K, 1UL << d->irq);
+}
+
+static struct irq_chip tilegx_legacy_irq_chip = {
+ .name = "tilegx_legacy_irq",
+ .irq_ack = tilegx_legacy_irq_ack,
+ .irq_mask = tilegx_legacy_irq_mask,
+ .irq_unmask = tilegx_legacy_irq_unmask,
+
+ /* TBD: support set_affinity. */
+};
+
+/*
+ * This is a wrapper function of the kernel level-trigger interrupt
+ * handler handle_level_irq() for PCI legacy interrupts. The TRIO
+ * is configured such that only INTx Assert interrupts are proxied
+ * to Linux which just calls handle_level_irq() after clearing the
+ * MAC INTx Assert status bit associated with this interrupt.
+ */
+static void trio_handle_level_irq(unsigned int irq, struct irq_desc *desc)
+{
+ struct pci_controller *controller = irq_desc_get_handler_data(desc);
+ gxio_trio_context_t *trio_context = controller->trio;
+ uint64_t intx = (uint64_t)irq_desc_get_chip_data(desc);
+ int mac = controller->mac;
+ unsigned int reg_offset;
+ uint64_t level_mask;
+
+ handle_level_irq(irq, desc);
+
+ /*
+ * Clear the INTx Level status, otherwise future interrupts are
+ * not sent.
+ */
+ reg_offset = (TRIO_PCIE_INTFC_MAC_INT_STS <<
+ TRIO_CFG_REGION_ADDR__REG_SHIFT) |
+ (TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_INTERFACE <<
+ TRIO_CFG_REGION_ADDR__INTFC_SHIFT ) |
+ (mac << TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT);
+
+ level_mask = TRIO_PCIE_INTFC_MAC_INT_STS__INT_LEVEL_MASK << intx;
+
+ __gxio_mmio_write(trio_context->mmio_base_mac + reg_offset, level_mask);
+}
+
+/*
+ * Create kernel irqs and set up the handlers for the legacy interrupts.
+ * Also some minimum initialization for the MSI support.
+ */
+static int tile_init_irqs(struct pci_controller *controller)
+{
+ int i;
+ int j;
+ int irq;
+ int result;
+
+ cpumask_copy(&intr_cpus_map, cpu_online_mask);
+
+
+ for (i = 0; i < 4; i++) {
+ gxio_trio_context_t *context = controller->trio;
+ int cpu;
+
+ /* Ask the kernel to allocate an IRQ. */
+ irq = irq_alloc_hwirq(-1);
+ if (!irq) {
+ pr_err("PCI: no free irq vectors, failed for %d\n", i);
+ goto free_irqs;
+ }
+ controller->irq_intx_table[i] = irq;
+
+ /* Distribute the 4 IRQs to different tiles. */
+ cpu = tile_irq_cpu(irq);
+
+ /* Configure the TRIO intr binding for this IRQ. */
+ result = gxio_trio_config_legacy_intr(context, cpu_x(cpu),
+ cpu_y(cpu), KERNEL_PL,
+ irq, controller->mac, i);
+ if (result < 0) {
+ pr_err("PCI: MAC intx config failed for %d\n", i);
+
+ goto free_irqs;
+ }
+
+ /* Register the IRQ handler with the kernel. */
+ irq_set_chip_and_handler(irq, &tilegx_legacy_irq_chip,
+ trio_handle_level_irq);
+ irq_set_chip_data(irq, (void *)(uint64_t)i);
+ irq_set_handler_data(irq, controller);
+ }
+
+ return 0;
+
+free_irqs:
+ for (j = 0; j < i; j++)
+ irq_free_hwirq(controller->irq_intx_table[j]);
+
+ return -1;
+}
+
+/*
+ * Return 1 if the port is strapped to operate in RC mode.
+ */
+static int
+strapped_for_rc(gxio_trio_context_t *trio_context, int mac)
+{
+ TRIO_PCIE_INTFC_PORT_CONFIG_t port_config;
+ unsigned int reg_offset;
+
+ /* Check the port configuration. */
+ reg_offset =
+ (TRIO_PCIE_INTFC_PORT_CONFIG <<
+ TRIO_CFG_REGION_ADDR__REG_SHIFT) |
+ (TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_INTERFACE <<
+ TRIO_CFG_REGION_ADDR__INTFC_SHIFT) |
+ (mac << TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT);
+ port_config.word =
+ __gxio_mmio_read(trio_context->mmio_base_mac + reg_offset);
+
+ if (port_config.strap_state == AUTO_CONFIG_RC ||
+ port_config.strap_state == AUTO_CONFIG_RC_G1)
+ return 1;
+ else
+ return 0;
+}
+
+/*
+ * Find valid controllers and fill in pci_controller structs for each
+ * of them.
+ *
+ * Return the number of controllers discovered.
+ */
+int __init tile_pci_init(void)
+{
+ int ctl_index = 0;
+ int i, j;
+
+ if (!pci_probe) {
+ pr_info("PCI: disabled by boot argument\n");
+ return 0;
+ }
+
+ pr_info("PCI: Searching for controllers...\n");
+
+ if (num_trio_shims == 0 || sim_is_simulator())
+ return 0;
+
+ /*
+ * Now determine which PCIe ports are configured to operate in RC
+ * mode. There is a differece in the port configuration capability
+ * between the Gx36 and Gx72 devices.
+ *
+ * The Gx36 has configuration capability for each of the 3 PCIe
+ * interfaces (disable, auto endpoint, auto RC, etc.).
+ * On the Gx72, you can only select one of the 3 PCIe interfaces per
+ * TRIO to train automatically. Further, the allowable training modes
+ * are reduced to four options (auto endpoint, auto RC, stream x1,
+ * stream x4).
+ *
+ * For Gx36 ports, it must be allowed to be in RC mode by the
+ * Board Information Block, and the hardware strapping pins must be
+ * set to RC mode.
+ *
+ * For Gx72 ports, the port will operate in RC mode if either of the
+ * following is true:
+ * 1. It is allowed to be in RC mode by the Board Information Block,
+ * and the BIB doesn't allow the EP mode.
+ * 2. It is allowed to be in either the RC or the EP mode by the BIB,
+ * and the hardware strapping pin is set to RC mode.
+ */
+ for (i = 0; i < TILEGX_NUM_TRIO; i++) {
+ gxio_trio_context_t *context = &trio_contexts[i];
+
+ if (context->fd < 0)
+ continue;
+
+ for (j = 0; j < TILEGX_TRIO_PCIES; j++) {
+ int is_rc = 0;
+
+ if (pcie_ports[i].is_gx72 &&
+ pcie_ports[i].ports[j].allow_rc) {
+ if (!pcie_ports[i].ports[j].allow_ep ||
+ strapped_for_rc(context, j))
+ is_rc = 1;
+ } else if (pcie_ports[i].ports[j].allow_rc &&
+ strapped_for_rc(context, j)) {
+ is_rc = 1;
+ }
+ if (is_rc) {
+ pcie_rc[i][j] = 1;
+ num_rc_controllers++;
+ }
+ }
+ }
+
+ /* Return if no PCIe ports are configured to operate in RC mode. */
+ if (num_rc_controllers == 0)
+ return 0;
+
+ /* Set the TRIO pointer and MAC index for each PCIe RC port. */
+ for (i = 0; i < TILEGX_NUM_TRIO; i++) {
+ for (j = 0; j < TILEGX_TRIO_PCIES; j++) {
+ if (pcie_rc[i][j]) {
+ pci_controllers[ctl_index].trio =
+ &trio_contexts[i];
+ pci_controllers[ctl_index].mac = j;
+ pci_controllers[ctl_index].trio_index = i;
+ ctl_index++;
+ if (ctl_index == num_rc_controllers)
+ goto out;
+ }
+ }
+ }
+
+out:
+ /* Configure each PCIe RC port. */
+ for (i = 0; i < num_rc_controllers; i++) {
+
+ /* Configure the PCIe MAC to run in RC mode. */
+ struct pci_controller *controller = &pci_controllers[i];
+
+ controller->index = i;
+ controller->ops = &tile_cfg_ops;
+
+ controller->io_space.start = PCIBIOS_MIN_IO +
+ (i * IO_SPACE_SIZE);
+ controller->io_space.end = controller->io_space.start +
+ IO_SPACE_SIZE - 1;
+ BUG_ON(controller->io_space.end > IO_SPACE_LIMIT);
+ controller->io_space.flags = IORESOURCE_IO;
+ snprintf(controller->io_space_name,
+ sizeof(controller->io_space_name),
+ "PCI I/O domain %d", i);
+ controller->io_space.name = controller->io_space_name;
+
+ /*
+ * The PCI memory resource is located above the PA space.
+ * For every host bridge, the BAR window or the MMIO aperture
+ * is in range [3GB, 4GB - 1] of a 4GB space beyond the
+ * PA space.
+ */
+ controller->mem_offset = TILE_PCI_MEM_START +
+ (i * TILE_PCI_BAR_WINDOW_TOP);
+ controller->mem_space.start = controller->mem_offset +
+ TILE_PCI_BAR_WINDOW_TOP - TILE_PCI_BAR_WINDOW_SIZE;
+ controller->mem_space.end = controller->mem_offset +
+ TILE_PCI_BAR_WINDOW_TOP - 1;
+ controller->mem_space.flags = IORESOURCE_MEM;
+ snprintf(controller->mem_space_name,
+ sizeof(controller->mem_space_name),
+ "PCI mem domain %d", i);
+ controller->mem_space.name = controller->mem_space_name;
+ }
+
+ return num_rc_controllers;
+}
+
+/*
+ * (pin - 1) converts from the PCI standard's [1:4] convention to
+ * a normal [0:3] range.
+ */
+static int tile_map_irq(const struct pci_dev *dev, u8 device, u8 pin)
+{
+ struct pci_controller *controller =
+ (struct pci_controller *)dev->sysdata;
+ return controller->irq_intx_table[pin - 1];
+}
+
+static void fixup_read_and_payload_sizes(struct pci_controller *controller)
+{
+ gxio_trio_context_t *trio_context = controller->trio;
+ struct pci_bus *root_bus = controller->root_bus;
+ TRIO_PCIE_RC_DEVICE_CONTROL_t dev_control;
+ TRIO_PCIE_RC_DEVICE_CAP_t rc_dev_cap;
+ unsigned int reg_offset;
+ struct pci_bus *child;
+ int mac;
+ int err;
+
+ mac = controller->mac;
+
+ /* Set our max read request size to be 4KB. */
+ reg_offset =
+ (TRIO_PCIE_RC_DEVICE_CONTROL <<
+ TRIO_CFG_REGION_ADDR__REG_SHIFT) |
+ (TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_STANDARD <<
+ TRIO_CFG_REGION_ADDR__INTFC_SHIFT ) |
+ (mac << TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT);
+
+ dev_control.word = __gxio_mmio_read32(trio_context->mmio_base_mac +
+ reg_offset);
+ dev_control.max_read_req_sz = 5;
+ __gxio_mmio_write32(trio_context->mmio_base_mac + reg_offset,
+ dev_control.word);
+
+ /*
+ * Set the max payload size supported by this Gx PCIe MAC.
+ * Though Gx PCIe supports Max Payload Size of up to 1024 bytes,
+ * experiments have shown that setting MPS to 256 yields the
+ * best performance.
+ */
+ reg_offset =
+ (TRIO_PCIE_RC_DEVICE_CAP <<
+ TRIO_CFG_REGION_ADDR__REG_SHIFT) |
+ (TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_STANDARD <<
+ TRIO_CFG_REGION_ADDR__INTFC_SHIFT ) |
+ (mac << TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT);
+
+ rc_dev_cap.word = __gxio_mmio_read32(trio_context->mmio_base_mac +
+ reg_offset);
+ rc_dev_cap.mps_sup = 1;
+ __gxio_mmio_write32(trio_context->mmio_base_mac + reg_offset,
+ rc_dev_cap.word);
+
+ /* Configure PCI Express MPS setting. */
+ list_for_each_entry(child, &root_bus->children, node)
+ pcie_bus_configure_settings(child);
+
+ /*
+ * Set the mac_config register in trio based on the MPS/MRS of the link.
+ */
+ reg_offset =
+ (TRIO_PCIE_RC_DEVICE_CONTROL <<
+ TRIO_CFG_REGION_ADDR__REG_SHIFT) |
+ (TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_STANDARD <<
+ TRIO_CFG_REGION_ADDR__INTFC_SHIFT ) |
+ (mac << TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT);
+
+ dev_control.word = __gxio_mmio_read32(trio_context->mmio_base_mac +
+ reg_offset);
+
+ err = gxio_trio_set_mps_mrs(trio_context,
+ dev_control.max_payload_size,
+ dev_control.max_read_req_sz,
+ mac);
+ if (err < 0) {
+ pr_err("PCI: PCIE_CONFIGURE_MAC_MPS_MRS failure, MAC %d on TRIO %d\n",
+ mac, controller->trio_index);
+ }
+}
+
+static int setup_pcie_rc_delay(char *str)
+{
+ unsigned long delay = 0;
+ unsigned long trio_index;
+ unsigned long mac;
+
+ if (str == NULL || !isdigit(*str))
+ return -EINVAL;
+ trio_index = simple_strtoul(str, (char **)&str, 10);
+ if (trio_index >= TILEGX_NUM_TRIO)
+ return -EINVAL;
+
+ if (*str != ',')
+ return -EINVAL;
+
+ str++;
+ if (!isdigit(*str))
+ return -EINVAL;
+ mac = simple_strtoul(str, (char **)&str, 10);
+ if (mac >= TILEGX_TRIO_PCIES)
+ return -EINVAL;
+
+ if (*str != '\0') {
+ if (*str != ',')
+ return -EINVAL;
+
+ str++;
+ if (!isdigit(*str))
+ return -EINVAL;
+ delay = simple_strtoul(str, (char **)&str, 10);
+ }
+
+ rc_delay[trio_index][mac] = delay ? : DEFAULT_RC_DELAY;
+ return 0;
+}
+early_param("pcie_rc_delay", setup_pcie_rc_delay);
+
+/* PCI initialization entry point, called by subsys_initcall. */
+int __init pcibios_init(void)
+{
+ resource_size_t offset;
+ LIST_HEAD(resources);
+ int next_busno;
+ int i;
+
+ tile_pci_init();
+
+ if (num_rc_controllers == 0)
+ return 0;
+
+ /*
+ * Delay a bit in case devices aren't ready. Some devices are
+ * known to require at least 20ms here, but we use a more
+ * conservative value.
+ */
+ msleep(250);
+
+ /* Scan all of the recorded PCI controllers. */
+ for (next_busno = 0, i = 0; i < num_rc_controllers; i++) {
+ struct pci_controller *controller = &pci_controllers[i];
+ gxio_trio_context_t *trio_context = controller->trio;
+ TRIO_PCIE_INTFC_PORT_STATUS_t port_status;
+ TRIO_PCIE_INTFC_TX_FIFO_CTL_t tx_fifo_ctl;
+ struct pci_bus *bus;
+ unsigned int reg_offset;
+ unsigned int class_code_revision;
+ int trio_index;
+ int mac;
+ int ret;
+
+ if (trio_context->fd < 0)
+ continue;
+
+ trio_index = controller->trio_index;
+ mac = controller->mac;
+
+ /*
+ * Check for PCIe link-up status to decide if we need
+ * to force the link to come up.
+ */
+ reg_offset =
+ (TRIO_PCIE_INTFC_PORT_STATUS <<
+ TRIO_CFG_REGION_ADDR__REG_SHIFT) |
+ (TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_INTERFACE <<
+ TRIO_CFG_REGION_ADDR__INTFC_SHIFT) |
+ (mac << TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT);
+
+ port_status.word =
+ __gxio_mmio_read(trio_context->mmio_base_mac +
+ reg_offset);
+ if (!port_status.dl_up) {
+ if (rc_delay[trio_index][mac]) {
+ pr_info("Delaying PCIe RC TRIO init %d sec on MAC %d on TRIO %d\n",
+ rc_delay[trio_index][mac], mac,
+ trio_index);
+ msleep(rc_delay[trio_index][mac] * 1000);
+ }
+ ret = gxio_trio_force_rc_link_up(trio_context, mac);
+ if (ret < 0)
+ pr_err("PCI: PCIE_FORCE_LINK_UP failure, MAC %d on TRIO %d\n",
+ mac, trio_index);
+ }
+
+ pr_info("PCI: Found PCI controller #%d on TRIO %d MAC %d\n",
+ i, trio_index, controller->mac);
+
+ /* Delay the bus probe if needed. */
+ if (rc_delay[trio_index][mac]) {
+ pr_info("Delaying PCIe RC bus enumerating %d sec on MAC %d on TRIO %d\n",
+ rc_delay[trio_index][mac], mac, trio_index);
+ msleep(rc_delay[trio_index][mac] * 1000);
+ } else {
+ /*
+ * Wait a bit here because some EP devices
+ * take longer to come up.
+ */
+ msleep(1000);
+ }
+
+ /* Check for PCIe link-up status again. */
+ port_status.word =
+ __gxio_mmio_read(trio_context->mmio_base_mac +
+ reg_offset);
+ if (!port_status.dl_up) {
+ if (pcie_ports[trio_index].ports[mac].removable) {
+ pr_info("PCI: link is down, MAC %d on TRIO %d\n",
+ mac, trio_index);
+ pr_info("This is expected if no PCIe card is connected to this link\n");
+ } else
+ pr_err("PCI: link is down, MAC %d on TRIO %d\n",
+ mac, trio_index);
+ continue;
+ }
+
+ /*
+ * Ensure that the link can come out of L1 power down state.
+ * Strictly speaking, this is needed only in the case of
+ * heavy RC-initiated DMAs.
+ */
+ reg_offset =
+ (TRIO_PCIE_INTFC_TX_FIFO_CTL <<
+ TRIO_CFG_REGION_ADDR__REG_SHIFT) |
+ (TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_INTERFACE <<
+ TRIO_CFG_REGION_ADDR__INTFC_SHIFT ) |
+ (mac << TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT);
+ tx_fifo_ctl.word =
+ __gxio_mmio_read(trio_context->mmio_base_mac +
+ reg_offset);
+ tx_fifo_ctl.min_p_credits = 0;
+ __gxio_mmio_write(trio_context->mmio_base_mac + reg_offset,
+ tx_fifo_ctl.word);
+
+ /*
+ * Change the device ID so that Linux bus crawl doesn't confuse
+ * the internal bridge with any Tilera endpoints.
+ */
+ reg_offset =
+ (TRIO_PCIE_RC_DEVICE_ID_VEN_ID <<
+ TRIO_CFG_REGION_ADDR__REG_SHIFT) |
+ (TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_STANDARD <<
+ TRIO_CFG_REGION_ADDR__INTFC_SHIFT ) |
+ (mac << TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT);
+
+ __gxio_mmio_write32(trio_context->mmio_base_mac + reg_offset,
+ (TILERA_GX36_RC_DEV_ID <<
+ TRIO_PCIE_RC_DEVICE_ID_VEN_ID__DEV_ID_SHIFT) |
+ TILERA_VENDOR_ID);
+
+ /* Set the internal P2P bridge class code. */
+ reg_offset =
+ (TRIO_PCIE_RC_REVISION_ID <<
+ TRIO_CFG_REGION_ADDR__REG_SHIFT) |
+ (TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_STANDARD <<
+ TRIO_CFG_REGION_ADDR__INTFC_SHIFT ) |
+ (mac << TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT);
+
+ class_code_revision =
+ __gxio_mmio_read32(trio_context->mmio_base_mac +
+ reg_offset);
+ class_code_revision = (class_code_revision & 0xff) |
+ (PCI_CLASS_BRIDGE_PCI << 16);
+
+ __gxio_mmio_write32(trio_context->mmio_base_mac +
+ reg_offset, class_code_revision);
+
+#ifdef USE_SHARED_PCIE_CONFIG_REGION
+
+ /* Map in the MMIO space for the PIO region. */
+ offset = HV_TRIO_PIO_OFFSET(trio_context->pio_cfg_index) |
+ (((unsigned long long)mac) <<
+ TRIO_TILE_PIO_REGION_SETUP_CFG_ADDR__MAC_SHIFT);
+
+#else
+
+ /* Alloc a PIO region for PCI config access per MAC. */
+ ret = gxio_trio_alloc_pio_regions(trio_context, 1, 0, 0);
+ if (ret < 0) {
+ pr_err("PCI: PCI CFG PIO alloc failure for mac %d on TRIO %d, give up\n",
+ mac, trio_index);
+
+ continue;
+ }
+
+ trio_context->pio_cfg_index[mac] = ret;
+
+ /* For PIO CFG, the bus_address_hi parameter is 0. */
+ ret = gxio_trio_init_pio_region_aux(trio_context,
+ trio_context->pio_cfg_index[mac],
+ mac, 0, HV_TRIO_PIO_FLAG_CONFIG_SPACE);
+ if (ret < 0) {
+ pr_err("PCI: PCI CFG PIO init failure for mac %d on TRIO %d, give up\n",
+ mac, trio_index);
+
+ continue;
+ }
+
+ offset = HV_TRIO_PIO_OFFSET(trio_context->pio_cfg_index[mac]) |
+ (((unsigned long long)mac) <<
+ TRIO_TILE_PIO_REGION_SETUP_CFG_ADDR__MAC_SHIFT);
+
+#endif
+
+ /*
+ * To save VMALLOC space, we take advantage of the fact that
+ * bit 29 in the PIO CFG address format is reserved 0. With
+ * TRIO_TILE_PIO_REGION_SETUP_CFG_ADDR__MAC_SHIFT being 30,
+ * this cuts VMALLOC space usage from 1GB to 512MB per mac.
+ */
+ trio_context->mmio_base_pio_cfg[mac] =
+ iorpc_ioremap(trio_context->fd, offset, (1UL <<
+ (TRIO_TILE_PIO_REGION_SETUP_CFG_ADDR__MAC_SHIFT - 1)));
+ if (trio_context->mmio_base_pio_cfg[mac] == NULL) {
+ pr_err("PCI: PIO map failure for mac %d on TRIO %d\n",
+ mac, trio_index);
+
+ continue;
+ }
+
+ /* Initialize the PCIe interrupts. */
+ if (tile_init_irqs(controller)) {
+ pr_err("PCI: IRQs init failure for mac %d on TRIO %d\n",
+ mac, trio_index);
+
+ continue;
+ }
+
+ /*
+ * The PCI memory resource is located above the PA space.
+ * The memory range for the PCI root bus should not overlap
+ * with the physical RAM.
+ */
+ pci_add_resource_offset(&resources, &controller->mem_space,
+ controller->mem_offset);
+ pci_add_resource(&resources, &controller->io_space);
+ controller->first_busno = next_busno;
+ bus = pci_scan_root_bus(NULL, next_busno, controller->ops,
+ controller, &resources);
+ controller->root_bus = bus;
+ next_busno = bus->busn_res.end + 1;
+ }
+
+ /* Do machine dependent PCI interrupt routing */
+ pci_fixup_irqs(pci_common_swizzle, tile_map_irq);
+
+ /*
+ * This comes from the generic Linux PCI driver.
+ *
+ * It allocates all of the resources (I/O memory, etc)
+ * associated with the devices read in above.
+ */
+ pci_assign_unassigned_resources();
+
+ /* Record the I/O resources in the PCI controller structure. */
+ for (i = 0; i < num_rc_controllers; i++) {
+ struct pci_controller *controller = &pci_controllers[i];
+ gxio_trio_context_t *trio_context = controller->trio;
+ struct pci_bus *root_bus = pci_controllers[i].root_bus;
+ int ret;
+ int j;
+
+ /*
+ * Skip controllers that are not properly initialized or
+ * have down links.
+ */
+ if (root_bus == NULL)
+ continue;
+
+ /* Configure the max_payload_size values for this domain. */
+ fixup_read_and_payload_sizes(controller);
+
+ /* Alloc a PIO region for PCI memory access for each RC port. */
+ ret = gxio_trio_alloc_pio_regions(trio_context, 1, 0, 0);
+ if (ret < 0) {
+ pr_err("PCI: MEM PIO alloc failure on TRIO %d mac %d, give up\n",
+ controller->trio_index, controller->mac);
+
+ continue;
+ }
+
+ controller->pio_mem_index = ret;
+
+ /*
+ * For PIO MEM, the bus_address_hi parameter is hard-coded 0
+ * because we always assign 32-bit PCI bus BAR ranges.
+ */
+ ret = gxio_trio_init_pio_region_aux(trio_context,
+ controller->pio_mem_index,
+ controller->mac,
+ 0,
+ 0);
+ if (ret < 0) {
+ pr_err("PCI: MEM PIO init failure on TRIO %d mac %d, give up\n",
+ controller->trio_index, controller->mac);
+
+ continue;
+ }
+
+#ifdef CONFIG_TILE_PCI_IO
+ /*
+ * Alloc a PIO region for PCI I/O space access for each RC port.
+ */
+ ret = gxio_trio_alloc_pio_regions(trio_context, 1, 0, 0);
+ if (ret < 0) {
+ pr_err("PCI: I/O PIO alloc failure on TRIO %d mac %d, give up\n",
+ controller->trio_index, controller->mac);
+
+ continue;
+ }
+
+ controller->pio_io_index = ret;
+
+ /*
+ * For PIO IO, the bus_address_hi parameter is hard-coded 0
+ * because PCI I/O address space is 32-bit.
+ */
+ ret = gxio_trio_init_pio_region_aux(trio_context,
+ controller->pio_io_index,
+ controller->mac,
+ 0,
+ HV_TRIO_PIO_FLAG_IO_SPACE);
+ if (ret < 0) {
+ pr_err("PCI: I/O PIO init failure on TRIO %d mac %d, give up\n",
+ controller->trio_index, controller->mac);
+
+ continue;
+ }
+#endif
+
+ /*
+ * Configure a Mem-Map region for each memory controller so
+ * that Linux can map all of its PA space to the PCI bus.
+ * Use the IOMMU to handle hash-for-home memory.
+ */
+ for_each_online_node(j) {
+ unsigned long start_pfn = node_start_pfn[j];
+ unsigned long end_pfn = node_end_pfn[j];
+ unsigned long nr_pages = end_pfn - start_pfn;
+
+ ret = gxio_trio_alloc_memory_maps(trio_context, 1, 0,
+ 0);
+ if (ret < 0) {
+ pr_err("PCI: Mem-Map alloc failure on TRIO %d mac %d for MC %d, give up\n",
+ controller->trio_index, controller->mac,
+ j);
+
+ goto alloc_mem_map_failed;
+ }
+
+ controller->mem_maps[j] = ret;
+
+ /*
+ * Initialize the Mem-Map and the I/O MMU so that all
+ * the physical memory can be accessed by the endpoint
+ * devices. The base bus address is set to the base CPA
+ * of this memory controller plus an offset (see pci.h).
+ * The region's base VA is set to the base CPA. The
+ * I/O MMU table essentially translates the CPA to
+ * the real PA. Implicitly, for node 0, we create
+ * a separate Mem-Map region that serves as the inbound
+ * window for legacy 32-bit devices. This is a direct
+ * map of the low 4GB CPA space.
+ */
+ ret = gxio_trio_init_memory_map_mmu_aux(trio_context,
+ controller->mem_maps[j],
+ start_pfn << PAGE_SHIFT,
+ nr_pages << PAGE_SHIFT,
+ trio_context->asid,
+ controller->mac,
+ (start_pfn << PAGE_SHIFT) +
+ TILE_PCI_MEM_MAP_BASE_OFFSET,
+ j,
+ GXIO_TRIO_ORDER_MODE_UNORDERED);
+ if (ret < 0) {
+ pr_err("PCI: Mem-Map init failure on TRIO %d mac %d for MC %d, give up\n",
+ controller->trio_index, controller->mac,
+ j);
+
+ goto alloc_mem_map_failed;
+ }
+ continue;
+
+alloc_mem_map_failed:
+ break;
+ }
+
+ pci_bus_add_devices(root_bus);
+ }
+
+ return 0;
+}
+subsys_initcall(pcibios_init);
+
+/* No bus fixups needed. */
+void pcibios_fixup_bus(struct pci_bus *bus)
+{
+}
+
+/* Process any "pci=" kernel boot arguments. */
+char *__init pcibios_setup(char *str)
+{
+ if (!strcmp(str, "off")) {
+ pci_probe = 0;
+ return NULL;
+ }
+ return str;
+}
+
+/*
+ * Called for each device after PCI setup is done.
+ * We initialize the PCI device capabilities conservatively, assuming that
+ * all devices can only address the 32-bit DMA space. The exception here is
+ * that the device dma_offset is set to the value that matches the 64-bit
+ * capable devices. This is OK because dma_offset is not used by legacy
+ * dma_ops, nor by the hybrid dma_ops's streaming DMAs, which are 64-bit ops.
+ * This implementation matches the kernel design of setting PCI devices'
+ * coherent_dma_mask to 0xffffffffull by default, allowing the device drivers
+ * to skip calling pci_set_consistent_dma_mask(DMA_BIT_MASK(32)).
+ */
+static void pcibios_fixup_final(struct pci_dev *pdev)
+{
+ set_dma_ops(&pdev->dev, gx_legacy_pci_dma_map_ops);
+ set_dma_offset(&pdev->dev, TILE_PCI_MEM_MAP_BASE_OFFSET);
+ pdev->dev.archdata.max_direct_dma_addr =
+ TILE_PCI_MAX_DIRECT_DMA_ADDRESS;
+ pdev->dev.coherent_dma_mask = TILE_PCI_MAX_DIRECT_DMA_ADDRESS;
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, pcibios_fixup_final);
+
+/* Map a PCI MMIO bus address into VA space. */
+void __iomem *ioremap(resource_size_t phys_addr, unsigned long size)
+{
+ struct pci_controller *controller = NULL;
+ resource_size_t bar_start;
+ resource_size_t bar_end;
+ resource_size_t offset;
+ resource_size_t start;
+ resource_size_t end;
+ int trio_fd;
+ int i;
+
+ start = phys_addr;
+ end = phys_addr + size - 1;
+
+ /*
+ * By searching phys_addr in each controller's mem_space, we can
+ * determine the controller that should accept the PCI memory access.
+ */
+ for (i = 0; i < num_rc_controllers; i++) {
+ /*
+ * Skip controllers that are not properly initialized or
+ * have down links.
+ */
+ if (pci_controllers[i].root_bus == NULL)
+ continue;
+
+ bar_start = pci_controllers[i].mem_space.start;
+ bar_end = pci_controllers[i].mem_space.end;
+
+ if ((start >= bar_start) && (end <= bar_end)) {
+ controller = &pci_controllers[i];
+ break;
+ }
+ }
+
+ if (controller == NULL)
+ return NULL;
+
+ trio_fd = controller->trio->fd;
+
+ /* Convert the resource start to the bus address offset. */
+ start = phys_addr - controller->mem_offset;
+
+ offset = HV_TRIO_PIO_OFFSET(controller->pio_mem_index) + start;
+
+ /* We need to keep the PCI bus address's in-page offset in the VA. */
+ return iorpc_ioremap(trio_fd, offset, size) +
+ (start & (PAGE_SIZE - 1));
+}
+EXPORT_SYMBOL(ioremap);
+
+#ifdef CONFIG_TILE_PCI_IO
+/* Map a PCI I/O address into VA space. */
+void __iomem *ioport_map(unsigned long port, unsigned int size)
+{
+ struct pci_controller *controller = NULL;
+ resource_size_t bar_start;
+ resource_size_t bar_end;
+ resource_size_t offset;
+ resource_size_t start;
+ resource_size_t end;
+ int trio_fd;
+ int i;
+
+ start = port;
+ end = port + size - 1;
+
+ /*
+ * By searching the port in each controller's io_space, we can
+ * determine the controller that should accept the PCI I/O access.
+ */
+ for (i = 0; i < num_rc_controllers; i++) {
+ /*
+ * Skip controllers that are not properly initialized or
+ * have down links.
+ */
+ if (pci_controllers[i].root_bus == NULL)
+ continue;
+
+ bar_start = pci_controllers[i].io_space.start;
+ bar_end = pci_controllers[i].io_space.end;
+
+ if ((start >= bar_start) && (end <= bar_end)) {
+ controller = &pci_controllers[i];
+ break;
+ }
+ }
+
+ if (controller == NULL)
+ return NULL;
+
+ trio_fd = controller->trio->fd;
+
+ /* Convert the resource start to the bus address offset. */
+ port -= controller->io_space.start;
+
+ offset = HV_TRIO_PIO_OFFSET(controller->pio_io_index) + port;
+
+ /* We need to keep the PCI bus address's in-page offset in the VA. */
+ return iorpc_ioremap(trio_fd, offset, size) + (port & (PAGE_SIZE - 1));
+}
+EXPORT_SYMBOL(ioport_map);
+
+void ioport_unmap(void __iomem *addr)
+{
+ iounmap(addr);
+}
+EXPORT_SYMBOL(ioport_unmap);
+#endif
+
+void pci_iounmap(struct pci_dev *dev, void __iomem *addr)
+{
+ iounmap(addr);
+}
+EXPORT_SYMBOL(pci_iounmap);
+
+/****************************************************************
+ *
+ * Tile PCI config space read/write routines
+ *
+ ****************************************************************/
+
+/*
+ * These are the normal read and write ops
+ * These are expanded with macros from pci_bus_read_config_byte() etc.
+ *
+ * devfn is the combined PCI device & function.
+ *
+ * offset is in bytes, from the start of config space for the
+ * specified bus & device.
+ */
+static int tile_cfg_read(struct pci_bus *bus, unsigned int devfn, int offset,
+ int size, u32 *val)
+{
+ struct pci_controller *controller = bus->sysdata;
+ gxio_trio_context_t *trio_context = controller->trio;
+ int busnum = bus->number & 0xff;
+ int device = PCI_SLOT(devfn);
+ int function = PCI_FUNC(devfn);
+ int config_type = 1;
+ TRIO_TILE_PIO_REGION_SETUP_CFG_ADDR_t cfg_addr;
+ void *mmio_addr;
+
+ /*
+ * Map all accesses to the local device on root bus into the
+ * MMIO space of the MAC. Accesses to the downstream devices
+ * go to the PIO space.
+ */
+ if (pci_is_root_bus(bus)) {
+ if (device == 0) {
+ /*
+ * This is the internal downstream P2P bridge,
+ * access directly.
+ */
+ unsigned int reg_offset;
+
+ reg_offset = ((offset & 0xFFF) <<
+ TRIO_CFG_REGION_ADDR__REG_SHIFT) |
+ (TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_PROTECTED
+ << TRIO_CFG_REGION_ADDR__INTFC_SHIFT ) |
+ (controller->mac <<
+ TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT);
+
+ mmio_addr = trio_context->mmio_base_mac + reg_offset;
+
+ goto valid_device;
+
+ } else {
+ /*
+ * We fake an empty device for (device > 0),
+ * since there is only one device on bus 0.
+ */
+ goto invalid_device;
+ }
+ }
+
+ /*
+ * Accesses to the directly attached device have to be
+ * sent as type-0 configs.
+ */
+ if (busnum == (controller->first_busno + 1)) {
+ /*
+ * There is only one device off of our built-in P2P bridge.
+ */
+ if (device != 0)
+ goto invalid_device;
+
+ config_type = 0;
+ }
+
+ cfg_addr.word = 0;
+ cfg_addr.reg_addr = (offset & 0xFFF);
+ cfg_addr.fn = function;
+ cfg_addr.dev = device;
+ cfg_addr.bus = busnum;
+ cfg_addr.type = config_type;
+
+ /*
+ * Note that we don't set the mac field in cfg_addr because the
+ * mapping is per port.
+ */
+ mmio_addr = trio_context->mmio_base_pio_cfg[controller->mac] +
+ cfg_addr.word;
+
+valid_device:
+
+ switch (size) {
+ case 4:
+ *val = __gxio_mmio_read32(mmio_addr);
+ break;
+
+ case 2:
+ *val = __gxio_mmio_read16(mmio_addr);
+ break;
+
+ case 1:
+ *val = __gxio_mmio_read8(mmio_addr);
+ break;
+
+ default:
+ return PCIBIOS_FUNC_NOT_SUPPORTED;
+ }
+
+ TRACE_CFG_RD(size, *val, busnum, device, function, offset);
+
+ return 0;
+
+invalid_device:
+
+ switch (size) {
+ case 4:
+ *val = 0xFFFFFFFF;
+ break;
+
+ case 2:
+ *val = 0xFFFF;
+ break;
+
+ case 1:
+ *val = 0xFF;
+ break;
+
+ default:
+ return PCIBIOS_FUNC_NOT_SUPPORTED;
+ }
+
+ return 0;
+}
+
+
+/*
+ * See tile_cfg_read() for relevent comments.
+ * Note that "val" is the value to write, not a pointer to that value.
+ */
+static int tile_cfg_write(struct pci_bus *bus, unsigned int devfn, int offset,
+ int size, u32 val)
+{
+ struct pci_controller *controller = bus->sysdata;
+ gxio_trio_context_t *trio_context = controller->trio;
+ int busnum = bus->number & 0xff;
+ int device = PCI_SLOT(devfn);
+ int function = PCI_FUNC(devfn);
+ int config_type = 1;
+ TRIO_TILE_PIO_REGION_SETUP_CFG_ADDR_t cfg_addr;
+ void *mmio_addr;
+ u32 val_32 = (u32)val;
+ u16 val_16 = (u16)val;
+ u8 val_8 = (u8)val;
+
+ /*
+ * Map all accesses to the local device on root bus into the
+ * MMIO space of the MAC. Accesses to the downstream devices
+ * go to the PIO space.
+ */
+ if (pci_is_root_bus(bus)) {
+ if (device == 0) {
+ /*
+ * This is the internal downstream P2P bridge,
+ * access directly.
+ */
+ unsigned int reg_offset;
+
+ reg_offset = ((offset & 0xFFF) <<
+ TRIO_CFG_REGION_ADDR__REG_SHIFT) |
+ (TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_PROTECTED
+ << TRIO_CFG_REGION_ADDR__INTFC_SHIFT ) |
+ (controller->mac <<
+ TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT);
+
+ mmio_addr = trio_context->mmio_base_mac + reg_offset;
+
+ goto valid_device;
+
+ } else {
+ /*
+ * We fake an empty device for (device > 0),
+ * since there is only one device on bus 0.
+ */
+ goto invalid_device;
+ }
+ }
+
+ /*
+ * Accesses to the directly attached device have to be
+ * sent as type-0 configs.
+ */
+ if (busnum == (controller->first_busno + 1)) {
+ /*
+ * There is only one device off of our built-in P2P bridge.
+ */
+ if (device != 0)
+ goto invalid_device;
+
+ config_type = 0;
+ }
+
+ cfg_addr.word = 0;
+ cfg_addr.reg_addr = (offset & 0xFFF);
+ cfg_addr.fn = function;
+ cfg_addr.dev = device;
+ cfg_addr.bus = busnum;
+ cfg_addr.type = config_type;
+
+ /*
+ * Note that we don't set the mac field in cfg_addr because the
+ * mapping is per port.
+ */
+ mmio_addr = trio_context->mmio_base_pio_cfg[controller->mac] +
+ cfg_addr.word;
+
+valid_device:
+
+ switch (size) {
+ case 4:
+ __gxio_mmio_write32(mmio_addr, val_32);
+ TRACE_CFG_WR(size, val_32, busnum, device, function, offset);
+ break;
+
+ case 2:
+ __gxio_mmio_write16(mmio_addr, val_16);
+ TRACE_CFG_WR(size, val_16, busnum, device, function, offset);
+ break;
+
+ case 1:
+ __gxio_mmio_write8(mmio_addr, val_8);
+ TRACE_CFG_WR(size, val_8, busnum, device, function, offset);
+ break;
+
+ default:
+ return PCIBIOS_FUNC_NOT_SUPPORTED;
+ }
+
+invalid_device:
+
+ return 0;
+}
+
+
+static struct pci_ops tile_cfg_ops = {
+ .read = tile_cfg_read,
+ .write = tile_cfg_write,
+};
+
+
+/* MSI support starts here. */
+static unsigned int tilegx_msi_startup(struct irq_data *d)
+{
+ if (d->msi_desc)
+ pci_msi_unmask_irq(d);
+
+ return 0;
+}
+
+static void tilegx_msi_ack(struct irq_data *d)
+{
+ __insn_mtspr(SPR_IPI_EVENT_RESET_K, 1UL << d->irq);
+}
+
+static void tilegx_msi_mask(struct irq_data *d)
+{
+ pci_msi_mask_irq(d);
+ __insn_mtspr(SPR_IPI_MASK_SET_K, 1UL << d->irq);
+}
+
+static void tilegx_msi_unmask(struct irq_data *d)
+{
+ __insn_mtspr(SPR_IPI_MASK_RESET_K, 1UL << d->irq);
+ pci_msi_unmask_irq(d);
+}
+
+static struct irq_chip tilegx_msi_chip = {
+ .name = "tilegx_msi",
+ .irq_startup = tilegx_msi_startup,
+ .irq_ack = tilegx_msi_ack,
+ .irq_mask = tilegx_msi_mask,
+ .irq_unmask = tilegx_msi_unmask,
+
+ /* TBD: support set_affinity. */
+};
+
+int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
+{
+ struct pci_controller *controller;
+ gxio_trio_context_t *trio_context;
+ struct msi_msg msg;
+ int default_irq;
+ uint64_t mem_map_base;
+ uint64_t mem_map_limit;
+ u64 msi_addr;
+ int mem_map;
+ int cpu;
+ int irq;
+ int ret;
+
+ irq = irq_alloc_hwirq(-1);
+ if (!irq)
+ return -ENOSPC;
+
+ /*
+ * Since we use a 64-bit Mem-Map to accept the MSI write, we fail
+ * devices that are not capable of generating a 64-bit message address.
+ * These devices will fall back to using the legacy interrupts.
+ * Most PCIe endpoint devices do support 64-bit message addressing.
+ */
+ if (desc->msi_attrib.is_64 == 0) {
+ dev_info(&pdev->dev, "64-bit MSI message address not supported, falling back to legacy interrupts\n");
+
+ ret = -ENOMEM;
+ goto is_64_failure;
+ }
+
+ default_irq = desc->msi_attrib.default_irq;
+ controller = irq_get_handler_data(default_irq);
+
+ BUG_ON(!controller);
+
+ trio_context = controller->trio;
+
+ /*
+ * Allocate a scatter-queue that will accept the MSI write and
+ * trigger the TILE-side interrupts. We use the scatter-queue regions
+ * before the mem map regions, because the latter are needed by more
+ * applications.
+ */
+ mem_map = gxio_trio_alloc_scatter_queues(trio_context, 1, 0, 0);
+ if (mem_map >= 0) {
+ TRIO_MAP_SQ_DOORBELL_FMT_t doorbell_template = {{
+ .pop = 0,
+ .doorbell = 1,
+ }};
+
+ mem_map += TRIO_NUM_MAP_MEM_REGIONS;
+ mem_map_base = MEM_MAP_INTR_REGIONS_BASE +
+ mem_map * MEM_MAP_INTR_REGION_SIZE;
+ mem_map_limit = mem_map_base + MEM_MAP_INTR_REGION_SIZE - 1;
+
+ msi_addr = mem_map_base + MEM_MAP_INTR_REGION_SIZE - 8;
+ msg.data = (unsigned int)doorbell_template.word;
+ } else {
+ /* SQ regions are out, allocate from map mem regions. */
+ mem_map = gxio_trio_alloc_memory_maps(trio_context, 1, 0, 0);
+ if (mem_map < 0) {
+ dev_info(&pdev->dev, "%s Mem-Map alloc failure - failed to initialize MSI interrupts - falling back to legacy interrupts\n",
+ desc->msi_attrib.is_msix ? "MSI-X" : "MSI");
+ ret = -ENOMEM;
+ goto msi_mem_map_alloc_failure;
+ }
+
+ mem_map_base = MEM_MAP_INTR_REGIONS_BASE +
+ mem_map * MEM_MAP_INTR_REGION_SIZE;
+ mem_map_limit = mem_map_base + MEM_MAP_INTR_REGION_SIZE - 1;
+
+ msi_addr = mem_map_base + TRIO_MAP_MEM_REG_INT3 -
+ TRIO_MAP_MEM_REG_INT0;
+
+ msg.data = mem_map;
+ }
+
+ /* We try to distribute different IRQs to different tiles. */
+ cpu = tile_irq_cpu(irq);
+
+ /*
+ * Now call up to the HV to configure the MSI interrupt and
+ * set up the IPI binding.
+ */
+ ret = gxio_trio_config_msi_intr(trio_context, cpu_x(cpu), cpu_y(cpu),
+ KERNEL_PL, irq, controller->mac,
+ mem_map, mem_map_base, mem_map_limit,
+ trio_context->asid);
+ if (ret < 0) {
+ dev_info(&pdev->dev, "HV MSI config failed\n");
+
+ goto hv_msi_config_failure;
+ }
+
+ irq_set_msi_desc(irq, desc);
+
+ msg.address_hi = msi_addr >> 32;
+ msg.address_lo = msi_addr & 0xffffffff;
+
+ pci_write_msi_msg(irq, &msg);
+ irq_set_chip_and_handler(irq, &tilegx_msi_chip, handle_level_irq);
+ irq_set_handler_data(irq, controller);
+
+ return 0;
+
+hv_msi_config_failure:
+ /* Free mem-map */
+msi_mem_map_alloc_failure:
+is_64_failure:
+ irq_free_hwirq(irq);
+ return ret;
+}
+
+void arch_teardown_msi_irq(unsigned int irq)
+{
+ irq_free_hwirq(irq);
+}
Code Review / kvmfornfv.git / blobdiff