Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / arch / sparc / kernel / syscalls.S
diff --git a/kernel/arch/sparc/kernel/syscalls.S b/kernel/arch/sparc/kernel/syscalls.S
new file mode 100644 (file)
index 0000000..bb00089
--- /dev/null
@@ -0,0 +1,270 @@
+       /* SunOS's execv() call only specifies the argv argument, the
+        * environment settings are the same as the calling processes.
+        */
+sys64_execve:
+       set     sys_execve, %g1
+       jmpl    %g1, %g0
+        flushw
+
+sys64_execveat:
+       set     sys_execveat, %g1
+       jmpl    %g1, %g0
+        flushw
+
+#ifdef CONFIG_COMPAT
+sunos_execv:
+       mov     %g0, %o2
+sys32_execve:
+       set     compat_sys_execve, %g1
+       jmpl    %g1, %g0
+        flushw
+
+sys32_execveat:
+       set     compat_sys_execveat, %g1
+       jmpl    %g1, %g0
+        flushw
+#endif
+
+       .align  32
+sys_sparc_pipe:
+       ba,pt   %xcc, sys_sparc_pipe_real
+        add    %sp, PTREGS_OFF, %o0
+sys_nis_syscall:
+       ba,pt   %xcc, c_sys_nis_syscall
+        add    %sp, PTREGS_OFF, %o0
+sys_memory_ordering:
+       ba,pt   %xcc, sparc_memory_ordering
+        add    %sp, PTREGS_OFF, %o1
+#ifdef CONFIG_COMPAT
+sys32_sigstack:
+       ba,pt   %xcc, do_sys32_sigstack
+        mov    %i6, %o2
+#endif
+       .align  32
+#ifdef CONFIG_COMPAT
+sys32_sigreturn:
+       add     %sp, PTREGS_OFF, %o0
+       call    do_sigreturn32
+        add    %o7, 1f-.-4, %o7
+       nop
+#endif
+sys_rt_sigreturn:
+       add     %sp, PTREGS_OFF, %o0
+       call    do_rt_sigreturn
+        add    %o7, 1f-.-4, %o7
+       nop
+#ifdef CONFIG_COMPAT
+sys32_rt_sigreturn:
+       add     %sp, PTREGS_OFF, %o0
+       call    do_rt_sigreturn32
+        add    %o7, 1f-.-4, %o7
+       nop
+#endif
+       .align  32
+1:     ldx     [%g6 + TI_FLAGS], %l5
+       andcc   %l5, (_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT|_TIF_SYSCALL_TRACEPOINT|_TIF_NOHZ), %g0
+       be,pt   %icc, rtrap
+        nop
+       call    syscall_trace_leave
+        add    %sp, PTREGS_OFF, %o0
+       ba,pt   %xcc, rtrap
+        nop
+
+       /* This is how fork() was meant to be done, 8 instruction entry.
+        *
+        * I questioned the following code briefly, let me clear things
+        * up so you must not reason on it like I did.
+        *
+        * Know the fork_kpsr etc. we use in the sparc32 port?  We don't
+        * need it here because the only piece of window state we copy to
+        * the child is the CWP register.  Even if the parent sleeps,
+        * we are safe because we stuck it into pt_regs of the parent
+        * so it will not change.
+        *
+        * XXX This raises the question, whether we can do the same on
+        * XXX sparc32 to get rid of fork_kpsr _and_ fork_kwim.  The
+        * XXX answer is yes.  We stick fork_kpsr in UREG_G0 and
+        * XXX fork_kwim in UREG_G1 (global registers are considered
+        * XXX volatile across a system call in the sparc ABI I think
+        * XXX if it isn't we can use regs->y instead, anyone who depends
+        * XXX upon the Y register being preserved across a fork deserves
+        * XXX to lose).
+        *
+        * In fact we should take advantage of that fact for other things
+        * during system calls...
+        */
+       .align  32
+sys_vfork: /* Under Linux, vfork and fork are just special cases of clone. */
+       sethi   %hi(0x4000 | 0x0100 | SIGCHLD), %o0
+       or      %o0, %lo(0x4000 | 0x0100 | SIGCHLD), %o0
+       ba,pt   %xcc, sys_clone
+sys_fork:
+        clr    %o1
+       mov     SIGCHLD, %o0
+sys_clone:
+       flushw
+       movrz   %o1, %fp, %o1
+       mov     0, %o3
+       ba,pt   %xcc, sparc_do_fork
+        add    %sp, PTREGS_OFF, %o2
+
+       .globl  ret_from_fork
+ret_from_fork:
+       /* Clear current_thread_info()->new_child. */
+       stb     %g0, [%g6 + TI_NEW_CHILD]
+       call    schedule_tail
+        mov    %g7, %o0
+       ldx     [%sp + PTREGS_OFF + PT_V9_I0], %o0
+       brnz,pt %o0, ret_sys_call
+        ldx    [%g6 + TI_FLAGS], %l0
+       ldx     [%sp + PTREGS_OFF + PT_V9_G1], %l1
+       call    %l1
+        ldx    [%sp + PTREGS_OFF + PT_V9_G2], %o0
+       ba,pt   %xcc, ret_sys_call
+        mov    0, %o0
+
+       .globl  sparc_exit_group
+       .type   sparc_exit_group,#function
+sparc_exit_group:
+       sethi   %hi(sys_exit_group), %g7
+       ba,pt   %xcc, 1f
+        or     %g7, %lo(sys_exit_group), %g7
+       .size   sparc_exit_group,.-sparc_exit_group
+
+       .globl  sparc_exit
+       .type   sparc_exit,#function
+sparc_exit:
+       sethi   %hi(sys_exit), %g7
+       or      %g7, %lo(sys_exit), %g7
+1:     rdpr    %pstate, %g2
+       wrpr    %g2, PSTATE_IE, %pstate
+       rdpr    %otherwin, %g1
+       rdpr    %cansave, %g3
+       add     %g3, %g1, %g3
+       wrpr    %g3, 0x0, %cansave
+       wrpr    %g0, 0x0, %otherwin
+       wrpr    %g2, 0x0, %pstate
+       jmpl    %g7, %g0
+        stb    %g0, [%g6 + TI_WSAVED]
+       .size   sparc_exit,.-sparc_exit
+
+linux_sparc_ni_syscall:
+       sethi   %hi(sys_ni_syscall), %l7
+       ba,pt   %xcc, 4f
+        or     %l7, %lo(sys_ni_syscall), %l7
+
+linux_syscall_trace32:
+       call    syscall_trace_enter
+        add    %sp, PTREGS_OFF, %o0
+       brnz,pn %o0, 3f
+        mov    -ENOSYS, %o0
+       srl     %i0, 0, %o0
+       srl     %i4, 0, %o4
+       srl     %i1, 0, %o1
+       srl     %i2, 0, %o2
+       ba,pt   %xcc, 5f
+        srl    %i3, 0, %o3
+
+linux_syscall_trace:
+       call    syscall_trace_enter
+        add    %sp, PTREGS_OFF, %o0
+       brnz,pn %o0, 3f
+        mov    -ENOSYS, %o0
+       mov     %i0, %o0
+       mov     %i1, %o1
+       mov     %i2, %o2
+       mov     %i3, %o3
+       b,pt    %xcc, 2f
+        mov    %i4, %o4
+
+
+       /* Linux 32-bit system calls enter here... */
+       .align  32
+       .globl  linux_sparc_syscall32
+linux_sparc_syscall32:
+       /* Direct access to user regs, much faster. */
+       cmp     %g1, NR_syscalls                        ! IEU1  Group
+       bgeu,pn %xcc, linux_sparc_ni_syscall            ! CTI
+        srl    %i0, 0, %o0                             ! IEU0
+       sll     %g1, 2, %l4                             ! IEU0  Group
+       srl     %i4, 0, %o4                             ! IEU1
+       lduw    [%l7 + %l4], %l7                        ! Load
+       srl     %i1, 0, %o1                             ! IEU0  Group
+       ldx     [%g6 + TI_FLAGS], %l0           ! Load
+
+       srl     %i3, 0, %o3                             ! IEU0
+       srl     %i2, 0, %o2                             ! IEU0  Group
+       andcc   %l0, (_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT|_TIF_SYSCALL_TRACEPOINT|_TIF_NOHZ), %g0
+       bne,pn  %icc, linux_syscall_trace32             ! CTI
+        mov    %i0, %l5                                ! IEU1
+5:     call    %l7                                     ! CTI   Group brk forced
+        srl    %i5, 0, %o5                             ! IEU1
+       ba,pt   %xcc, 3f
+        sra    %o0, 0, %o0
+
+       /* Linux native system calls enter here... */
+       .align  32
+       .globl  linux_sparc_syscall
+linux_sparc_syscall:
+       /* Direct access to user regs, much faster. */
+       cmp     %g1, NR_syscalls                        ! IEU1  Group
+       bgeu,pn %xcc, linux_sparc_ni_syscall            ! CTI
+        mov    %i0, %o0                                ! IEU0
+       sll     %g1, 2, %l4                             ! IEU0  Group
+       mov     %i1, %o1                                ! IEU1
+       lduw    [%l7 + %l4], %l7                        ! Load
+4:     mov     %i2, %o2                                ! IEU0  Group
+       ldx     [%g6 + TI_FLAGS], %l0           ! Load
+
+       mov     %i3, %o3                                ! IEU1
+       mov     %i4, %o4                                ! IEU0  Group
+       andcc   %l0, (_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT|_TIF_SYSCALL_TRACEPOINT|_TIF_NOHZ), %g0
+       bne,pn  %icc, linux_syscall_trace               ! CTI   Group
+        mov    %i0, %l5                                ! IEU0
+2:     call    %l7                                     ! CTI   Group brk forced
+        mov    %i5, %o5                                ! IEU0
+       nop
+
+3:     stx     %o0, [%sp + PTREGS_OFF + PT_V9_I0]
+ret_sys_call:
+       ldx     [%sp + PTREGS_OFF + PT_V9_TSTATE], %g3
+       mov     %ulo(TSTATE_XCARRY | TSTATE_ICARRY), %g2
+       sllx    %g2, 32, %g2
+
+       cmp     %o0, -ERESTART_RESTARTBLOCK
+       bgeu,pn %xcc, 1f
+        andcc  %l0, (_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT|_TIF_SYSCALL_TRACEPOINT|_TIF_NOHZ), %g0
+       ldx     [%sp + PTREGS_OFF + PT_V9_TNPC], %l1 ! pc = npc
+
+2:
+       /* System call success, clear Carry condition code. */
+       andn    %g3, %g2, %g3
+3:
+       stx     %g3, [%sp + PTREGS_OFF + PT_V9_TSTATE]  
+       bne,pn  %icc, linux_syscall_trace2
+        add    %l1, 0x4, %l2                   ! npc = npc+4
+       stx     %l1, [%sp + PTREGS_OFF + PT_V9_TPC]
+       ba,pt   %xcc, rtrap
+        stx    %l2, [%sp + PTREGS_OFF + PT_V9_TNPC]
+
+1:
+       /* Check if force_successful_syscall_return()
+        * was invoked.
+        */
+       ldub    [%g6 + TI_SYS_NOERROR], %l2
+       brnz,pn %l2, 2b
+        ldx    [%sp + PTREGS_OFF + PT_V9_TNPC], %l1 ! pc = npc
+       /* System call failure, set Carry condition code.
+        * Also, get abs(errno) to return to the process.
+        */
+       sub     %g0, %o0, %o0
+       stx     %o0, [%sp + PTREGS_OFF + PT_V9_I0]
+       ba,pt   %xcc, 3b
+        or     %g3, %g2, %g3
+
+linux_syscall_trace2:
+       call    syscall_trace_leave
+        add    %sp, PTREGS_OFF, %o0
+       stx     %l1, [%sp + PTREGS_OFF + PT_V9_TPC]
+       ba,pt   %xcc, rtrap
+        stx    %l2, [%sp + PTREGS_OFF + PT_V9_TNPC]