--- /dev/null
+/*
+ * pgtsrmmu.h: SRMMU page table defines and code.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_PGTSRMMU_H
+#define _SPARC_PGTSRMMU_H
+
+#include <asm/page.h>
+
+#ifdef __ASSEMBLY__
+#include <asm/thread_info.h> /* TI_UWINMASK for WINDOW_FLUSH */
+#endif
+
+/* Number of contexts is implementation-dependent; 64k is the most we support */
+#define SRMMU_MAX_CONTEXTS 65536
+
+/* PMD_SHIFT determines the size of the area a second-level page table entry can map */
+#define SRMMU_REAL_PMD_SHIFT 18
+#define SRMMU_REAL_PMD_SIZE (1UL << SRMMU_REAL_PMD_SHIFT)
+#define SRMMU_REAL_PMD_MASK (~(SRMMU_REAL_PMD_SIZE-1))
+#define SRMMU_REAL_PMD_ALIGN(__addr) (((__addr)+SRMMU_REAL_PMD_SIZE-1)&SRMMU_REAL_PMD_MASK)
+
+/* PGDIR_SHIFT determines what a third-level page table entry can map */
+#define SRMMU_PGDIR_SHIFT 24
+#define SRMMU_PGDIR_SIZE (1UL << SRMMU_PGDIR_SHIFT)
+#define SRMMU_PGDIR_MASK (~(SRMMU_PGDIR_SIZE-1))
+#define SRMMU_PGDIR_ALIGN(addr) (((addr)+SRMMU_PGDIR_SIZE-1)&SRMMU_PGDIR_MASK)
+
+#define SRMMU_REAL_PTRS_PER_PTE 64
+#define SRMMU_REAL_PTRS_PER_PMD 64
+#define SRMMU_PTRS_PER_PGD 256
+
+#define SRMMU_REAL_PTE_TABLE_SIZE (SRMMU_REAL_PTRS_PER_PTE*4)
+#define SRMMU_PMD_TABLE_SIZE (SRMMU_REAL_PTRS_PER_PMD*4)
+#define SRMMU_PGD_TABLE_SIZE (SRMMU_PTRS_PER_PGD*4)
+
+/*
+ * To support pagetables in highmem, Linux introduces APIs which
+ * return struct page* and generally manipulate page tables when
+ * they are not mapped into kernel space. Our hardware page tables
+ * are smaller than pages. We lump hardware tabes into big, page sized
+ * software tables.
+ *
+ * PMD_SHIFT determines the size of the area a second-level page table entry
+ * can map, and our pmd_t is 16 times larger than normal. The values which
+ * were once defined here are now generic for 4c and srmmu, so they're
+ * found in pgtable.h.
+ */
+#define SRMMU_PTRS_PER_PMD 4
+
+/* Definition of the values in the ET field of PTD's and PTE's */
+#define SRMMU_ET_MASK 0x3
+#define SRMMU_ET_INVALID 0x0
+#define SRMMU_ET_PTD 0x1
+#define SRMMU_ET_PTE 0x2
+#define SRMMU_ET_REPTE 0x3 /* AIEEE, SuperSparc II reverse endian page! */
+
+/* Physical page extraction from PTP's and PTE's. */
+#define SRMMU_CTX_PMASK 0xfffffff0
+#define SRMMU_PTD_PMASK 0xfffffff0
+#define SRMMU_PTE_PMASK 0xffffff00
+
+/* The pte non-page bits. Some notes:
+ * 1) cache, dirty, valid, and ref are frobbable
+ * for both supervisor and user pages.
+ * 2) exec and write will only give the desired effect
+ * on user pages
+ * 3) use priv and priv_readonly for changing the
+ * characteristics of supervisor ptes
+ */
+#define SRMMU_CACHE 0x80
+#define SRMMU_DIRTY 0x40
+#define SRMMU_REF 0x20
+#define SRMMU_NOREAD 0x10
+#define SRMMU_EXEC 0x08
+#define SRMMU_WRITE 0x04
+#define SRMMU_VALID 0x02 /* SRMMU_ET_PTE */
+#define SRMMU_PRIV 0x1c
+#define SRMMU_PRIV_RDONLY 0x18
+
+#define SRMMU_CHG_MASK (0xffffff00 | SRMMU_REF | SRMMU_DIRTY)
+
+/* SRMMU swap entry encoding
+ *
+ * We use 5 bits for the type and 19 for the offset. This gives us
+ * 32 swapfiles of 4GB each. Encoding looks like:
+ *
+ * oooooooooooooooooootttttRRRRRRRR
+ * fedcba9876543210fedcba9876543210
+ *
+ * The bottom 7 bits are reserved for protection and status bits, especially
+ * PRESENT.
+ */
+#define SRMMU_SWP_TYPE_MASK 0x1f
+#define SRMMU_SWP_TYPE_SHIFT 7
+#define SRMMU_SWP_OFF_MASK 0xfffff
+#define SRMMU_SWP_OFF_SHIFT (SRMMU_SWP_TYPE_SHIFT + 5)
+
+/* Some day I will implement true fine grained access bits for
+ * user pages because the SRMMU gives us the capabilities to
+ * enforce all the protection levels that vma's can have.
+ * XXX But for now...
+ */
+#define SRMMU_PAGE_NONE __pgprot(SRMMU_CACHE | \
+ SRMMU_PRIV | SRMMU_REF)
+#define SRMMU_PAGE_SHARED __pgprot(SRMMU_VALID | SRMMU_CACHE | \
+ SRMMU_EXEC | SRMMU_WRITE | SRMMU_REF)
+#define SRMMU_PAGE_COPY __pgprot(SRMMU_VALID | SRMMU_CACHE | \
+ SRMMU_EXEC | SRMMU_REF)
+#define SRMMU_PAGE_RDONLY __pgprot(SRMMU_VALID | SRMMU_CACHE | \
+ SRMMU_EXEC | SRMMU_REF)
+#define SRMMU_PAGE_KERNEL __pgprot(SRMMU_VALID | SRMMU_CACHE | SRMMU_PRIV | \
+ SRMMU_DIRTY | SRMMU_REF)
+
+/* SRMMU Register addresses in ASI 0x4. These are valid for all
+ * current SRMMU implementations that exist.
+ */
+#define SRMMU_CTRL_REG 0x00000000
+#define SRMMU_CTXTBL_PTR 0x00000100
+#define SRMMU_CTX_REG 0x00000200
+#define SRMMU_FAULT_STATUS 0x00000300
+#define SRMMU_FAULT_ADDR 0x00000400
+
+#define WINDOW_FLUSH(tmp1, tmp2) \
+ mov 0, tmp1; \
+98: ld [%g6 + TI_UWINMASK], tmp2; \
+ orcc %g0, tmp2, %g0; \
+ add tmp1, 1, tmp1; \
+ bne 98b; \
+ save %sp, -64, %sp; \
+99: subcc tmp1, 1, tmp1; \
+ bne 99b; \
+ restore %g0, %g0, %g0;
+
+#ifndef __ASSEMBLY__
+extern unsigned long last_valid_pfn;
+
+/* This makes sense. Honest it does - Anton */
+/* XXX Yes but it's ugly as sin. FIXME. -KMW */
+extern void *srmmu_nocache_pool;
+#define __nocache_pa(VADDR) (((unsigned long)VADDR) - SRMMU_NOCACHE_VADDR + __pa((unsigned long)srmmu_nocache_pool))
+#define __nocache_va(PADDR) (__va((unsigned long)PADDR) - (unsigned long)srmmu_nocache_pool + SRMMU_NOCACHE_VADDR)
+#define __nocache_fix(VADDR) __va(__nocache_pa(VADDR))
+
+/* Accessing the MMU control register. */
+unsigned int srmmu_get_mmureg(void);
+void srmmu_set_mmureg(unsigned long regval);
+void srmmu_set_ctable_ptr(unsigned long paddr);
+void srmmu_set_context(int context);
+int srmmu_get_context(void);
+unsigned int srmmu_get_fstatus(void);
+unsigned int srmmu_get_faddr(void);
+
+/* This is guaranteed on all SRMMU's. */
+static inline void srmmu_flush_whole_tlb(void)
+{
+ __asm__ __volatile__("sta %%g0, [%0] %1\n\t": :
+ "r" (0x400), /* Flush entire TLB!! */
+ "i" (ASI_M_FLUSH_PROBE) : "memory");
+
+}
+
+static inline int
+srmmu_get_pte (unsigned long addr)
+{
+ register unsigned long entry;
+
+ __asm__ __volatile__("\n\tlda [%1] %2,%0\n\t" :
+ "=r" (entry):
+ "r" ((addr & 0xfffff000) | 0x400), "i" (ASI_M_FLUSH_PROBE));
+ return entry;
+}
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(_SPARC_PGTSRMMU_H) */
Code Review / kvmfornfv.git / blobdiff