--- /dev/null
+menu "Board support"
+
+config SOLUTION_ENGINE
+ bool
+
+config SH_ALPHA_BOARD
+ bool
+
+config SH_SOLUTION_ENGINE
+ bool "SolutionEngine"
+ select SOLUTION_ENGINE
+ select CPU_HAS_IPR_IRQ
+ depends on CPU_SUBTYPE_SH7705 || CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7710 || \
+ CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7750S || \
+ CPU_SUBTYPE_SH7750R
+ help
+ Select SolutionEngine if configuring for a Hitachi SH7705, SH7709,
+ SH7710, SH7712, SH7750, SH7750S or SH7750R evaluation board.
+
+config SH_7206_SOLUTION_ENGINE
+ bool "SolutionEngine7206"
+ select SOLUTION_ENGINE
+ depends on CPU_SUBTYPE_SH7206
+ help
+ Select 7206 SolutionEngine if configuring for a Hitachi SH7206
+ evaluation board.
+
+config SH_7619_SOLUTION_ENGINE
+ bool "SolutionEngine7619"
+ select SOLUTION_ENGINE
+ depends on CPU_SUBTYPE_SH7619
+ help
+ Select 7619 SolutionEngine if configuring for a Hitachi SH7619
+ evaluation board.
+
+config SH_7721_SOLUTION_ENGINE
+ bool "SolutionEngine7721"
+ select SOLUTION_ENGINE
+ depends on CPU_SUBTYPE_SH7721
+ help
+ Select 7721 SolutionEngine if configuring for a Hitachi SH7721
+ evaluation board.
+
+config SH_7722_SOLUTION_ENGINE
+ bool "SolutionEngine7722"
+ select SOLUTION_ENGINE
+ select GENERIC_IRQ_CHIP
+ select IRQ_DOMAIN
+ depends on CPU_SUBTYPE_SH7722
+ help
+ Select 7722 SolutionEngine if configuring for a Hitachi SH772
+ evaluation board.
+
+config SH_7724_SOLUTION_ENGINE
+ bool "SolutionEngine7724"
+ select SOLUTION_ENGINE
+ depends on CPU_SUBTYPE_SH7724
+ select ARCH_REQUIRE_GPIOLIB
+ select SND_SOC_AK4642 if SND_SIMPLE_CARD
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
+ help
+ Select 7724 SolutionEngine if configuring for a Hitachi SH7724
+ evaluation board.
+
+config SH_7751_SOLUTION_ENGINE
+ bool "SolutionEngine7751"
+ select SOLUTION_ENGINE
+ select CPU_HAS_IPR_IRQ
+ depends on CPU_SUBTYPE_SH7751
+ help
+ Select 7751 SolutionEngine if configuring for a Hitachi SH7751
+ evaluation board.
+
+config SH_7780_SOLUTION_ENGINE
+ bool "SolutionEngine7780"
+ select SOLUTION_ENGINE
+ select SYS_SUPPORTS_PCI
+ depends on CPU_SUBTYPE_SH7780
+ help
+ Select 7780 SolutionEngine if configuring for a Renesas SH7780
+ evaluation board.
+
+config SH_7343_SOLUTION_ENGINE
+ bool "SolutionEngine7343"
+ select SOLUTION_ENGINE
+ select GENERIC_IRQ_CHIP
+ select IRQ_DOMAIN
+ depends on CPU_SUBTYPE_SH7343
+ help
+ Select 7343 SolutionEngine if configuring for a Hitachi
+ SH7343 (SH-Mobile 3AS) evaluation board.
+
+config SH_HP6XX
+ bool "HP6XX"
+ select SYS_SUPPORTS_APM_EMULATION
+ select HD6446X_SERIES
+ depends on CPU_SUBTYPE_SH7709
+ help
+ Select HP6XX if configuring for a HP jornada HP6xx.
+ More information (hardware only) at
+ <http://www.hp.com/jornada/>.
+
+config SH_DREAMCAST
+ bool "Dreamcast"
+ select SYS_SUPPORTS_PCI
+ depends on CPU_SUBTYPE_SH7091
+ help
+ Select Dreamcast if configuring for a SEGA Dreamcast.
+ More information at <http://www.linux-sh.org>
+
+config SH_SH03
+ bool "Interface CTP/PCI-SH03"
+ depends on CPU_SUBTYPE_SH7751
+ select CPU_HAS_IPR_IRQ
+ select SYS_SUPPORTS_PCI
+ help
+ CTP/PCI-SH03 is a CPU module computer that is produced
+ by Interface Corporation.
+ More information at <http://www.interface.co.jp>
+
+config SH_SECUREEDGE5410
+ bool "SecureEdge5410"
+ depends on CPU_SUBTYPE_SH7751R
+ select CPU_HAS_IPR_IRQ
+ select SYS_SUPPORTS_PCI
+ help
+ Select SecureEdge5410 if configuring for a SnapGear SH board.
+ This includes both the OEM SecureEdge products as well as the
+ SME product line.
+
+config SH_RTS7751R2D
+ bool "RTS7751R2D"
+ depends on CPU_SUBTYPE_SH7751R
+ select SYS_SUPPORTS_PCI
+ select IO_TRAPPED if MMU
+ help
+ Select RTS7751R2D if configuring for a Renesas Technology
+ Sales SH-Graphics board.
+
+config SH_RSK
+ bool "Renesas Starter Kit"
+ depends on CPU_SUBTYPE_SH7201 || CPU_SUBTYPE_SH7203 || \
+ CPU_SUBTYPE_SH7264 || CPU_SUBTYPE_SH7269
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
+ help
+ Select this option if configuring for any of the RSK+ MCU
+ evaluation platforms.
+
+config SH_SDK7780
+ bool "SDK7780R3"
+ depends on CPU_SUBTYPE_SH7780
+ select SYS_SUPPORTS_PCI
+ help
+ Select SDK7780 if configuring for a Renesas SH7780 SDK7780R3
+ evaluation board.
+
+config SH_SDK7786
+ bool "SDK7786"
+ depends on CPU_SUBTYPE_SH7786
+ select SYS_SUPPORTS_PCI
+ select NO_IOPORT_MAP if !PCI
+ select ARCH_WANT_OPTIONAL_GPIOLIB
+ select HAVE_SRAM_POOL
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
+ help
+ Select SDK7786 if configuring for a Renesas Technology Europe
+ SH7786-65nm board.
+
+config SH_HIGHLANDER
+ bool "Highlander"
+ depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
+ select SYS_SUPPORTS_PCI
+ select IO_TRAPPED if MMU
+
+config SH_SH7757LCR
+ bool "SH7757LCR"
+ depends on CPU_SUBTYPE_SH7757
+ select ARCH_REQUIRE_GPIOLIB
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
+
+config SH_SH7785LCR
+ bool "SH7785LCR"
+ depends on CPU_SUBTYPE_SH7785
+ select SYS_SUPPORTS_PCI
+
+config SH_SH7785LCR_29BIT_PHYSMAPS
+ bool "SH7785LCR 29bit physmaps"
+ depends on SH_SH7785LCR && 29BIT
+ default y
+ help
+ This board has 2 physical memory maps. It can be changed with
+ DIP switch(S2-5). If you set the DIP switch for S2-5 = ON,
+ you can access all on-board device in 29bit address mode.
+
+config SH_SH7785LCR_PT
+ bool "SH7785LCR prototype board on 32-bit MMU mode"
+ depends on SH_SH7785LCR && 32BIT
+ default n
+ help
+ If you use prototype board, this option is enabled.
+
+config SH_URQUELL
+ bool "Urquell"
+ depends on CPU_SUBTYPE_SH7786
+ select ARCH_REQUIRE_GPIOLIB
+ select SYS_SUPPORTS_PCI
+ select NO_IOPORT_MAP if !PCI
+
+config SH_MIGOR
+ bool "Migo-R"
+ depends on CPU_SUBTYPE_SH7722
+ select ARCH_REQUIRE_GPIOLIB
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
+ help
+ Select Migo-R if configuring for the SH7722 Migo-R platform
+ by Renesas System Solutions Asia Pte. Ltd.
+
+config SH_AP325RXA
+ bool "AP-325RXA"
+ depends on CPU_SUBTYPE_SH7723
+ select ARCH_REQUIRE_GPIOLIB
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
+ help
+ Renesas "AP-325RXA" support.
+ Compatible with ALGO SYSTEM CO.,LTD. "AP-320A"
+
+config SH_KFR2R09
+ bool "KFR2R09"
+ depends on CPU_SUBTYPE_SH7724
+ select ARCH_REQUIRE_GPIOLIB
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
+ help
+ "Kit For R2R for 2009" support.
+
+config SH_ECOVEC
+ bool "EcoVec"
+ depends on CPU_SUBTYPE_SH7724
+ select ARCH_REQUIRE_GPIOLIB
+ select SND_SOC_DA7210 if SND_SIMPLE_CARD
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
+ help
+ Renesas "R0P7724LC0011/21RL (EcoVec)" support.
+
+config SH_SH7763RDP
+ bool "SH7763RDP"
+ depends on CPU_SUBTYPE_SH7763
+ help
+ Select SH7763RDP if configuring for a Renesas SH7763
+ evaluation board.
+
+config SH_ESPT
+ bool "ESPT"
+ depends on CPU_SUBTYPE_SH7763
+ help
+ Select ESPT if configuring for a Renesas SH7763
+ with gigabit ether evaluation board.
+
+config SH_EDOSK7705
+ bool "EDOSK7705"
+ depends on CPU_SUBTYPE_SH7705
+
+config SH_EDOSK7760
+ bool "EDOSK7760"
+ depends on CPU_SUBTYPE_SH7760
+ help
+ Select if configuring for a Renesas EDOSK7760
+ evaluation board.
+
+config SH_SH4202_MICRODEV
+ bool "SH4-202 MicroDev"
+ depends on CPU_SUBTYPE_SH4_202
+ help
+ Select SH4-202 MicroDev if configuring for a SuperH MicroDev board
+ with an SH4-202 CPU.
+
+config SH_LANDISK
+ bool "LANDISK"
+ depends on CPU_SUBTYPE_SH7751R
+ select SYS_SUPPORTS_PCI
+ help
+ I-O DATA DEVICE, INC. "LANDISK Series" support.
+
+config SH_TITAN
+ bool "TITAN"
+ depends on CPU_SUBTYPE_SH7751R
+ select CPU_HAS_IPR_IRQ
+ select SYS_SUPPORTS_PCI
+ help
+ Select Titan if you are configuring for a Nimble Microsystems
+ NetEngine NP51R.
+
+config SH_SHMIN
+ bool "SHMIN"
+ depends on CPU_SUBTYPE_SH7706
+ select CPU_HAS_IPR_IRQ
+ help
+ Select SHMIN if configuring for the SHMIN board.
+
+config SH_LBOX_RE2
+ bool "L-BOX RE2"
+ depends on CPU_SUBTYPE_SH7751R
+ select SYS_SUPPORTS_PCI
+ help
+ Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2.
+
+config SH_X3PROTO
+ bool "SH-X3 Prototype board"
+ depends on CPU_SUBTYPE_SHX3
+ select NO_IOPORT_MAP if !PCI
+ select IRQ_DOMAIN
+
+config SH_MAGIC_PANEL_R2
+ bool "Magic Panel R2"
+ depends on CPU_SUBTYPE_SH7720
+ select ARCH_REQUIRE_GPIOLIB
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
+ help
+ Select Magic Panel R2 if configuring for Magic Panel R2.
+
+config SH_CAYMAN
+ bool "Hitachi Cayman"
+ depends on CPU_SUBTYPE_SH5_101 || CPU_SUBTYPE_SH5_103
+ select SYS_SUPPORTS_PCI
+ select ARCH_MIGHT_HAVE_PC_SERIO
+
+config SH_POLARIS
+ bool "SMSC Polaris"
+ select CPU_HAS_IPR_IRQ
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
+ depends on CPU_SUBTYPE_SH7709
+ help
+ Select if configuring for an SMSC Polaris development board
+
+config SH_SH2007
+ bool "SH-2007 board"
+ select NO_IOPORT_MAP
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
+ depends on CPU_SUBTYPE_SH7780
+ help
+ SH-2007 is a single-board computer based around SH7780 chip
+ intended for embedded applications.
+ It has an Ethernet interface (SMC9118), direct connected
+ Compact Flash socket, two serial ports and PC-104 bus.
+ More information at <http://sh2000.sh-linux.org>.
+
+config SH_APSH4A3A
+ bool "AP-SH4A-3A"
+ select SH_ALPHA_BOARD
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
+ depends on CPU_SUBTYPE_SH7785
+ help
+ Select AP-SH4A-3A if configuring for an ALPHAPROJECT AP-SH4A-3A.
+
+config SH_APSH4AD0A
+ bool "AP-SH4AD-0A"
+ select SH_ALPHA_BOARD
+ select SYS_SUPPORTS_PCI
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
+ depends on CPU_SUBTYPE_SH7786
+ help
+ Select AP-SH4AD-0A if configuring for an ALPHAPROJECT AP-SH4AD-0A.
+
+source "arch/sh/boards/mach-r2d/Kconfig"
+source "arch/sh/boards/mach-highlander/Kconfig"
+source "arch/sh/boards/mach-sdk7780/Kconfig"
+source "arch/sh/boards/mach-migor/Kconfig"
+source "arch/sh/boards/mach-rsk/Kconfig"
+
+if SH_MAGIC_PANEL_R2
+
+menu "Magic Panel R2 options"
+
+config SH_MAGIC_PANEL_R2_VERSION
+ int "Magic Panel R2 Version"
+ default "3"
+ help
+ Set the version of the Magic Panel R2
+
+endmenu
+
+endif
+
+endmenu
Code Review / kvmfornfv.git / blobdiff