--- /dev/null
+/*
+ * Copyright IBM Corp 2000, 2011
+ * Author(s): Holger Smolinski <Holger.Smolinski@de.ibm.com>,
+ * Denis Joseph Barrow,
+ */
+
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/sigp.h>
+
+#
+# store_status
+#
+# Prerequisites to run this function:
+# - Prefix register is set to zero
+# - Original prefix register is stored in "dump_prefix_page"
+# - Lowcore protection is off
+#
+ENTRY(store_status)
+ /* Save register one and load save area base */
+ stg %r1,__LC_SAVE_AREA_RESTART
+ lghi %r1,SAVE_AREA_BASE
+ /* General purpose registers */
+ stmg %r0,%r15,__LC_GPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
+ lg %r2,__LC_SAVE_AREA_RESTART
+ stg %r2,__LC_GPREGS_SAVE_AREA-SAVE_AREA_BASE+8(%r1)
+ /* Control registers */
+ stctg %c0,%c15,__LC_CREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
+ /* Access registers */
+ stam %a0,%a15,__LC_AREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
+ /* Floating point registers */
+ std %f0, 0x00 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
+ std %f1, 0x08 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
+ std %f2, 0x10 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
+ std %f3, 0x18 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
+ std %f4, 0x20 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
+ std %f5, 0x28 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
+ std %f6, 0x30 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
+ std %f7, 0x38 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
+ std %f8, 0x40 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
+ std %f9, 0x48 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
+ std %f10,0x50 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
+ std %f11,0x58 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
+ std %f12,0x60 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
+ std %f13,0x68 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
+ std %f14,0x70 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
+ std %f15,0x78 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
+ /* Floating point control register */
+ stfpc __LC_FP_CREG_SAVE_AREA-SAVE_AREA_BASE(%r1)
+ /* CPU timer */
+ stpt __LC_CPU_TIMER_SAVE_AREA-SAVE_AREA_BASE(%r1)
+ /* Saved prefix register */
+ larl %r2,dump_prefix_page
+ mvc __LC_PREFIX_SAVE_AREA-SAVE_AREA_BASE(4,%r1),0(%r2)
+ /* Clock comparator - seven bytes */
+ larl %r2,.Lclkcmp
+ stckc 0(%r2)
+ mvc __LC_CLOCK_COMP_SAVE_AREA-SAVE_AREA_BASE + 1(7,%r1),1(%r2)
+ /* Program status word */
+ epsw %r2,%r3
+ st %r2,__LC_PSW_SAVE_AREA-SAVE_AREA_BASE + 0(%r1)
+ st %r3,__LC_PSW_SAVE_AREA-SAVE_AREA_BASE + 4(%r1)
+ larl %r2,store_status
+ stg %r2,__LC_PSW_SAVE_AREA-SAVE_AREA_BASE + 8(%r1)
+ br %r14
+
+ .section .bss
+ .align 8
+.Lclkcmp: .quad 0x0000000000000000
+ .previous
+
+#
+# do_reipl_asm
+# Parameter: r2 = schid of reipl device
+#
+
+ENTRY(do_reipl_asm)
+ basr %r13,0
+.Lpg0: lpswe .Lnewpsw-.Lpg0(%r13)
+.Lpg1: brasl %r14,store_status
+
+ lctlg %c6,%c6,.Lall-.Lpg0(%r13)
+ lgr %r1,%r2
+ mvc __LC_PGM_NEW_PSW(16),.Lpcnew-.Lpg0(%r13)
+ stsch .Lschib-.Lpg0(%r13)
+ oi .Lschib+5-.Lpg0(%r13),0x84
+.Lecs: xi .Lschib+27-.Lpg0(%r13),0x01
+ msch .Lschib-.Lpg0(%r13)
+ lghi %r0,5
+.Lssch: ssch .Liplorb-.Lpg0(%r13)
+ jz .L001
+ brct %r0,.Lssch
+ bas %r14,.Ldisab-.Lpg0(%r13)
+.L001: mvc __LC_IO_NEW_PSW(16),.Lionew-.Lpg0(%r13)
+.Ltpi: lpswe .Lwaitpsw-.Lpg0(%r13)
+.Lcont: c %r1,__LC_SUBCHANNEL_ID
+ jnz .Ltpi
+ clc __LC_IO_INT_PARM(4),.Liplorb-.Lpg0(%r13)
+ jnz .Ltpi
+ tsch .Liplirb-.Lpg0(%r13)
+ tm .Liplirb+9-.Lpg0(%r13),0xbf
+ jz .L002
+ bas %r14,.Ldisab-.Lpg0(%r13)
+.L002: tm .Liplirb+8-.Lpg0(%r13),0xf3
+ jz .L003
+ bas %r14,.Ldisab-.Lpg0(%r13)
+.L003: st %r1,__LC_SUBCHANNEL_ID
+ lhi %r1,0 # mode 0 = esa
+ slr %r0,%r0 # set cpuid to zero
+ sigp %r1,%r0,SIGP_SET_ARCHITECTURE # switch to esa mode
+ lpsw 0
+.Ldisab: sll %r14,1
+ srl %r14,1 # need to kill hi bit to avoid specification exceptions.
+ st %r14,.Ldispsw+12-.Lpg0(%r13)
+ lpswe .Ldispsw-.Lpg0(%r13)
+ .align 8
+.Lall: .quad 0x00000000ff000000
+ .align 16
+/*
+ * These addresses have to be 31 bit otherwise
+ * the sigp will throw a specifcation exception
+ * when switching to ESA mode as bit 31 be set
+ * in the ESA psw.
+ * Bit 31 of the addresses has to be 0 for the
+ * 31bit lpswe instruction a fact they appear to have
+ * omitted from the pop.
+ */
+.Lnewpsw: .quad 0x0000000080000000
+ .quad .Lpg1
+.Lpcnew: .quad 0x0000000080000000
+ .quad .Lecs
+.Lionew: .quad 0x0000000080000000
+ .quad .Lcont
+.Lwaitpsw: .quad 0x0202000080000000
+ .quad .Ltpi
+.Ldispsw: .quad 0x0002000080000000
+ .quad 0x0000000000000000
+.Liplccws: .long 0x02000000,0x60000018
+ .long 0x08000008,0x20000001
+.Liplorb: .long 0x0049504c,0x0040ff80
+ .long 0x00000000+.Liplccws
+.Lschib: .long 0x00000000,0x00000000
+ .long 0x00000000,0x00000000
+ .long 0x00000000,0x00000000
+ .long 0x00000000,0x00000000
+ .long 0x00000000,0x00000000
+ .long 0x00000000,0x00000000
+.Liplirb: .long 0x00000000,0x00000000
+ .long 0x00000000,0x00000000
+ .long 0x00000000,0x00000000
+ .long 0x00000000,0x00000000
+ .long 0x00000000,0x00000000
+ .long 0x00000000,0x00000000
+ .long 0x00000000,0x00000000
+ .long 0x00000000,0x00000000
Code Review / kvmfornfv.git / blobdiff