--- /dev/null
+/*
+ * Copyright (C) 1996-2001 Paul Mackerras (paulus@cs.anu.edu.au)
+ * Ben. Herrenschmidt (benh@kernel.crashing.org)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * TODO:
+ *
+ * - Replace mdelay with some schedule loop if possible
+ * - Shorten some obfuscated delays on some routines (like modem
+ * power)
+ * - Refcount some clocks (see darwin)
+ * - Split split split...
+ *
+ */
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/spinlock.h>
+#include <linux/adb.h>
+#include <linux/pmu.h>
+#include <linux/ioport.h>
+#include <linux/export.h>
+#include <linux/pci.h>
+#include <asm/sections.h>
+#include <asm/errno.h>
+#include <asm/ohare.h>
+#include <asm/heathrow.h>
+#include <asm/keylargo.h>
+#include <asm/uninorth.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/machdep.h>
+#include <asm/pmac_feature.h>
+#include <asm/dbdma.h>
+#include <asm/pci-bridge.h>
+#include <asm/pmac_low_i2c.h>
+
+#undef DEBUG_FEATURE
+
+#ifdef DEBUG_FEATURE
+#define DBG(fmt...) printk(KERN_DEBUG fmt)
+#else
+#define DBG(fmt...)
+#endif
+
+#ifdef CONFIG_6xx
+extern int powersave_lowspeed;
+#endif
+
+extern int powersave_nap;
+extern struct device_node *k2_skiplist[2];
+
+/*
+ * We use a single global lock to protect accesses. Each driver has
+ * to take care of its own locking
+ */
+DEFINE_RAW_SPINLOCK(feature_lock);
+
+#define LOCK(flags) raw_spin_lock_irqsave(&feature_lock, flags);
+#define UNLOCK(flags) raw_spin_unlock_irqrestore(&feature_lock, flags);
+
+
+/*
+ * Instance of some macio stuffs
+ */
+struct macio_chip macio_chips[MAX_MACIO_CHIPS];
+
+struct macio_chip *macio_find(struct device_node *child, int type)
+{
+ while(child) {
+ int i;
+
+ for (i=0; i < MAX_MACIO_CHIPS && macio_chips[i].of_node; i++)
+ if (child == macio_chips[i].of_node &&
+ (!type || macio_chips[i].type == type))
+ return &macio_chips[i];
+ child = child->parent;
+ }
+ return NULL;
+}
+EXPORT_SYMBOL_GPL(macio_find);
+
+static const char *macio_names[] =
+{
+ "Unknown",
+ "Grand Central",
+ "OHare",
+ "OHareII",
+ "Heathrow",
+ "Gatwick",
+ "Paddington",
+ "Keylargo",
+ "Pangea",
+ "Intrepid",
+ "K2",
+ "Shasta",
+};
+
+
+struct device_node *uninorth_node;
+u32 __iomem *uninorth_base;
+
+static u32 uninorth_rev;
+static int uninorth_maj;
+static void __iomem *u3_ht_base;
+
+/*
+ * For each motherboard family, we have a table of functions pointers
+ * that handle the various features.
+ */
+
+typedef long (*feature_call)(struct device_node *node, long param, long value);
+
+struct feature_table_entry {
+ unsigned int selector;
+ feature_call function;
+};
+
+struct pmac_mb_def
+{
+ const char* model_string;
+ const char* model_name;
+ int model_id;
+ struct feature_table_entry* features;
+ unsigned long board_flags;
+};
+static struct pmac_mb_def pmac_mb;
+
+/*
+ * Here are the chip specific feature functions
+ */
+
+static inline int simple_feature_tweak(struct device_node *node, int type,
+ int reg, u32 mask, int value)
+{
+ struct macio_chip* macio;
+ unsigned long flags;
+
+ macio = macio_find(node, type);
+ if (!macio)
+ return -ENODEV;
+ LOCK(flags);
+ if (value)
+ MACIO_BIS(reg, mask);
+ else
+ MACIO_BIC(reg, mask);
+ (void)MACIO_IN32(reg);
+ UNLOCK(flags);
+
+ return 0;
+}
+
+#ifndef CONFIG_PPC64
+
+static long ohare_htw_scc_enable(struct device_node *node, long param,
+ long value)
+{
+ struct macio_chip* macio;
+ unsigned long chan_mask;
+ unsigned long fcr;
+ unsigned long flags;
+ int htw, trans;
+ unsigned long rmask;
+
+ macio = macio_find(node, 0);
+ if (!macio)
+ return -ENODEV;
+ if (!strcmp(node->name, "ch-a"))
+ chan_mask = MACIO_FLAG_SCCA_ON;
+ else if (!strcmp(node->name, "ch-b"))
+ chan_mask = MACIO_FLAG_SCCB_ON;
+ else
+ return -ENODEV;
+
+ htw = (macio->type == macio_heathrow || macio->type == macio_paddington
+ || macio->type == macio_gatwick);
+ /* On these machines, the HRW_SCC_TRANS_EN_N bit mustn't be touched */
+ trans = (pmac_mb.model_id != PMAC_TYPE_YOSEMITE &&
+ pmac_mb.model_id != PMAC_TYPE_YIKES);
+ if (value) {
+#ifdef CONFIG_ADB_PMU
+ if ((param & 0xfff) == PMAC_SCC_IRDA)
+ pmu_enable_irled(1);
+#endif /* CONFIG_ADB_PMU */
+ LOCK(flags);
+ fcr = MACIO_IN32(OHARE_FCR);
+ /* Check if scc cell need enabling */
+ if (!(fcr & OH_SCC_ENABLE)) {
+ fcr |= OH_SCC_ENABLE;
+ if (htw) {
+ /* Side effect: this will also power up the
+ * modem, but it's too messy to figure out on which
+ * ports this controls the tranceiver and on which
+ * it controls the modem
+ */
+ if (trans)
+ fcr &= ~HRW_SCC_TRANS_EN_N;
+ MACIO_OUT32(OHARE_FCR, fcr);
+ fcr |= (rmask = HRW_RESET_SCC);
+ MACIO_OUT32(OHARE_FCR, fcr);
+ } else {
+ fcr |= (rmask = OH_SCC_RESET);
+ MACIO_OUT32(OHARE_FCR, fcr);
+ }
+ UNLOCK(flags);
+ (void)MACIO_IN32(OHARE_FCR);
+ mdelay(15);
+ LOCK(flags);
+ fcr &= ~rmask;
+ MACIO_OUT32(OHARE_FCR, fcr);
+ }
+ if (chan_mask & MACIO_FLAG_SCCA_ON)
+ fcr |= OH_SCCA_IO;
+ if (chan_mask & MACIO_FLAG_SCCB_ON)
+ fcr |= OH_SCCB_IO;
+ MACIO_OUT32(OHARE_FCR, fcr);
+ macio->flags |= chan_mask;
+ UNLOCK(flags);
+ if (param & PMAC_SCC_FLAG_XMON)
+ macio->flags |= MACIO_FLAG_SCC_LOCKED;
+ } else {
+ if (macio->flags & MACIO_FLAG_SCC_LOCKED)
+ return -EPERM;
+ LOCK(flags);
+ fcr = MACIO_IN32(OHARE_FCR);
+ if (chan_mask & MACIO_FLAG_SCCA_ON)
+ fcr &= ~OH_SCCA_IO;
+ if (chan_mask & MACIO_FLAG_SCCB_ON)
+ fcr &= ~OH_SCCB_IO;
+ MACIO_OUT32(OHARE_FCR, fcr);
+ if ((fcr & (OH_SCCA_IO | OH_SCCB_IO)) == 0) {
+ fcr &= ~OH_SCC_ENABLE;
+ if (htw && trans)
+ fcr |= HRW_SCC_TRANS_EN_N;
+ MACIO_OUT32(OHARE_FCR, fcr);
+ }
+ macio->flags &= ~(chan_mask);
+ UNLOCK(flags);
+ mdelay(10);
+#ifdef CONFIG_ADB_PMU
+ if ((param & 0xfff) == PMAC_SCC_IRDA)
+ pmu_enable_irled(0);
+#endif /* CONFIG_ADB_PMU */
+ }
+ return 0;
+}
+
+static long ohare_floppy_enable(struct device_node *node, long param,
+ long value)
+{
+ return simple_feature_tweak(node, macio_ohare,
+ OHARE_FCR, OH_FLOPPY_ENABLE, value);
+}
+
+static long ohare_mesh_enable(struct device_node *node, long param, long value)
+{
+ return simple_feature_tweak(node, macio_ohare,
+ OHARE_FCR, OH_MESH_ENABLE, value);
+}
+
+static long ohare_ide_enable(struct device_node *node, long param, long value)
+{
+ switch(param) {
+ case 0:
+ /* For some reason, setting the bit in set_initial_features()
+ * doesn't stick. I'm still investigating... --BenH.
+ */
+ if (value)
+ simple_feature_tweak(node, macio_ohare,
+ OHARE_FCR, OH_IOBUS_ENABLE, 1);
+ return simple_feature_tweak(node, macio_ohare,
+ OHARE_FCR, OH_IDE0_ENABLE, value);
+ case 1:
+ return simple_feature_tweak(node, macio_ohare,
+ OHARE_FCR, OH_BAY_IDE_ENABLE, value);
+ default:
+ return -ENODEV;
+ }
+}
+
+static long ohare_ide_reset(struct device_node *node, long param, long value)
+{
+ switch(param) {
+ case 0:
+ return simple_feature_tweak(node, macio_ohare,
+ OHARE_FCR, OH_IDE0_RESET_N, !value);
+ case 1:
+ return simple_feature_tweak(node, macio_ohare,
+ OHARE_FCR, OH_IDE1_RESET_N, !value);
+ default:
+ return -ENODEV;
+ }
+}
+
+static long ohare_sleep_state(struct device_node *node, long param, long value)
+{
+ struct macio_chip* macio = &macio_chips[0];
+
+ if ((pmac_mb.board_flags & PMAC_MB_CAN_SLEEP) == 0)
+ return -EPERM;
+ if (value == 1) {
+ MACIO_BIC(OHARE_FCR, OH_IOBUS_ENABLE);
+ } else if (value == 0) {
+ MACIO_BIS(OHARE_FCR, OH_IOBUS_ENABLE);
+ }
+
+ return 0;
+}
+
+static long heathrow_modem_enable(struct device_node *node, long param,
+ long value)
+{
+ struct macio_chip* macio;
+ u8 gpio;
+ unsigned long flags;
+
+ macio = macio_find(node, macio_unknown);
+ if (!macio)
+ return -ENODEV;
+ gpio = MACIO_IN8(HRW_GPIO_MODEM_RESET) & ~1;
+ if (!value) {
+ LOCK(flags);
+ MACIO_OUT8(HRW_GPIO_MODEM_RESET, gpio);
+ UNLOCK(flags);
+ (void)MACIO_IN8(HRW_GPIO_MODEM_RESET);
+ mdelay(250);
+ }
+ if (pmac_mb.model_id != PMAC_TYPE_YOSEMITE &&
+ pmac_mb.model_id != PMAC_TYPE_YIKES) {
+ LOCK(flags);
+ if (value)
+ MACIO_BIC(HEATHROW_FCR, HRW_SCC_TRANS_EN_N);
+ else
+ MACIO_BIS(HEATHROW_FCR, HRW_SCC_TRANS_EN_N);
+ UNLOCK(flags);
+ (void)MACIO_IN32(HEATHROW_FCR);
+ mdelay(250);
+ }
+ if (value) {
+ LOCK(flags);
+ MACIO_OUT8(HRW_GPIO_MODEM_RESET, gpio | 1);
+ (void)MACIO_IN8(HRW_GPIO_MODEM_RESET);
+ UNLOCK(flags); mdelay(250); LOCK(flags);
+ MACIO_OUT8(HRW_GPIO_MODEM_RESET, gpio);
+ (void)MACIO_IN8(HRW_GPIO_MODEM_RESET);
+ UNLOCK(flags); mdelay(250); LOCK(flags);
+ MACIO_OUT8(HRW_GPIO_MODEM_RESET, gpio | 1);
+ (void)MACIO_IN8(HRW_GPIO_MODEM_RESET);
+ UNLOCK(flags); mdelay(250);
+ }
+ return 0;
+}
+
+static long heathrow_floppy_enable(struct device_node *node, long param,
+ long value)
+{
+ return simple_feature_tweak(node, macio_unknown,
+ HEATHROW_FCR,
+ HRW_SWIM_ENABLE|HRW_BAY_FLOPPY_ENABLE,
+ value);
+}
+
+static long heathrow_mesh_enable(struct device_node *node, long param,
+ long value)
+{
+ struct macio_chip* macio;
+ unsigned long flags;
+
+ macio = macio_find(node, macio_unknown);
+ if (!macio)
+ return -ENODEV;
+ LOCK(flags);
+ /* Set clear mesh cell enable */
+ if (value)
+ MACIO_BIS(HEATHROW_FCR, HRW_MESH_ENABLE);
+ else
+ MACIO_BIC(HEATHROW_FCR, HRW_MESH_ENABLE);
+ (void)MACIO_IN32(HEATHROW_FCR);
+ udelay(10);
+ /* Set/Clear termination power */
+ if (value)
+ MACIO_BIC(HEATHROW_MBCR, 0x04000000);
+ else
+ MACIO_BIS(HEATHROW_MBCR, 0x04000000);
+ (void)MACIO_IN32(HEATHROW_MBCR);
+ udelay(10);
+ UNLOCK(flags);
+
+ return 0;
+}
+
+static long heathrow_ide_enable(struct device_node *node, long param,
+ long value)
+{
+ switch(param) {
+ case 0:
+ return simple_feature_tweak(node, macio_unknown,
+ HEATHROW_FCR, HRW_IDE0_ENABLE, value);
+ case 1:
+ return simple_feature_tweak(node, macio_unknown,
+ HEATHROW_FCR, HRW_BAY_IDE_ENABLE, value);
+ default:
+ return -ENODEV;
+ }
+}
+
+static long heathrow_ide_reset(struct device_node *node, long param,
+ long value)
+{
+ switch(param) {
+ case 0:
+ return simple_feature_tweak(node, macio_unknown,
+ HEATHROW_FCR, HRW_IDE0_RESET_N, !value);
+ case 1:
+ return simple_feature_tweak(node, macio_unknown,
+ HEATHROW_FCR, HRW_IDE1_RESET_N, !value);
+ default:
+ return -ENODEV;
+ }
+}
+
+static long heathrow_bmac_enable(struct device_node *node, long param,
+ long value)
+{
+ struct macio_chip* macio;
+ unsigned long flags;
+
+ macio = macio_find(node, 0);
+ if (!macio)
+ return -ENODEV;
+ if (value) {
+ LOCK(flags);
+ MACIO_BIS(HEATHROW_FCR, HRW_BMAC_IO_ENABLE);
+ MACIO_BIS(HEATHROW_FCR, HRW_BMAC_RESET);
+ UNLOCK(flags);
+ (void)MACIO_IN32(HEATHROW_FCR);
+ mdelay(10);
+ LOCK(flags);
+ MACIO_BIC(HEATHROW_FCR, HRW_BMAC_RESET);
+ UNLOCK(flags);
+ (void)MACIO_IN32(HEATHROW_FCR);
+ mdelay(10);
+ } else {
+ LOCK(flags);
+ MACIO_BIC(HEATHROW_FCR, HRW_BMAC_IO_ENABLE);
+ UNLOCK(flags);
+ }
+ return 0;
+}
+
+static long heathrow_sound_enable(struct device_node *node, long param,
+ long value)
+{
+ struct macio_chip* macio;
+ unsigned long flags;
+
+ /* B&W G3 and Yikes don't support that properly (the
+ * sound appear to never come back after beeing shut down).
+ */
+ if (pmac_mb.model_id == PMAC_TYPE_YOSEMITE ||
+ pmac_mb.model_id == PMAC_TYPE_YIKES)
+ return 0;
+
+ macio = macio_find(node, 0);
+ if (!macio)
+ return -ENODEV;
+ if (value) {
+ LOCK(flags);
+ MACIO_BIS(HEATHROW_FCR, HRW_SOUND_CLK_ENABLE);
+ MACIO_BIC(HEATHROW_FCR, HRW_SOUND_POWER_N);
+ UNLOCK(flags);
+ (void)MACIO_IN32(HEATHROW_FCR);
+ } else {
+ LOCK(flags);
+ MACIO_BIS(HEATHROW_FCR, HRW_SOUND_POWER_N);
+ MACIO_BIC(HEATHROW_FCR, HRW_SOUND_CLK_ENABLE);
+ UNLOCK(flags);
+ }
+ return 0;
+}
+
+static u32 save_fcr[6];
+static u32 save_mbcr;
+static struct dbdma_regs save_dbdma[13];
+static struct dbdma_regs save_alt_dbdma[13];
+
+static void dbdma_save(struct macio_chip *macio, struct dbdma_regs *save)
+{
+ int i;
+
+ /* Save state & config of DBDMA channels */
+ for (i = 0; i < 13; i++) {
+ volatile struct dbdma_regs __iomem * chan = (void __iomem *)
+ (macio->base + ((0x8000+i*0x100)>>2));
+ save[i].cmdptr_hi = in_le32(&chan->cmdptr_hi);
+ save[i].cmdptr = in_le32(&chan->cmdptr);
+ save[i].intr_sel = in_le32(&chan->intr_sel);
+ save[i].br_sel = in_le32(&chan->br_sel);
+ save[i].wait_sel = in_le32(&chan->wait_sel);
+ }
+}
+
+static void dbdma_restore(struct macio_chip *macio, struct dbdma_regs *save)
+{
+ int i;
+
+ /* Save state & config of DBDMA channels */
+ for (i = 0; i < 13; i++) {
+ volatile struct dbdma_regs __iomem * chan = (void __iomem *)
+ (macio->base + ((0x8000+i*0x100)>>2));
+ out_le32(&chan->control, (ACTIVE|DEAD|WAKE|FLUSH|PAUSE|RUN)<<16);
+ while (in_le32(&chan->status) & ACTIVE)
+ mb();
+ out_le32(&chan->cmdptr_hi, save[i].cmdptr_hi);
+ out_le32(&chan->cmdptr, save[i].cmdptr);
+ out_le32(&chan->intr_sel, save[i].intr_sel);
+ out_le32(&chan->br_sel, save[i].br_sel);
+ out_le32(&chan->wait_sel, save[i].wait_sel);
+ }
+}
+
+static void heathrow_sleep(struct macio_chip *macio, int secondary)
+{
+ if (secondary) {
+ dbdma_save(macio, save_alt_dbdma);
+ save_fcr[2] = MACIO_IN32(0x38);
+ save_fcr[3] = MACIO_IN32(0x3c);
+ } else {
+ dbdma_save(macio, save_dbdma);
+ save_fcr[0] = MACIO_IN32(0x38);
+ save_fcr[1] = MACIO_IN32(0x3c);
+ save_mbcr = MACIO_IN32(0x34);
+ /* Make sure sound is shut down */
+ MACIO_BIS(HEATHROW_FCR, HRW_SOUND_POWER_N);
+ MACIO_BIC(HEATHROW_FCR, HRW_SOUND_CLK_ENABLE);
+ /* This seems to be necessary as well or the fan
+ * keeps coming up and battery drains fast */
+ MACIO_BIC(HEATHROW_FCR, HRW_IOBUS_ENABLE);
+ MACIO_BIC(HEATHROW_FCR, HRW_IDE0_RESET_N);
+ /* Make sure eth is down even if module or sleep
+ * won't work properly */
+ MACIO_BIC(HEATHROW_FCR, HRW_BMAC_IO_ENABLE | HRW_BMAC_RESET);
+ }
+ /* Make sure modem is shut down */
+ MACIO_OUT8(HRW_GPIO_MODEM_RESET,
+ MACIO_IN8(HRW_GPIO_MODEM_RESET) & ~1);
+ MACIO_BIS(HEATHROW_FCR, HRW_SCC_TRANS_EN_N);
+ MACIO_BIC(HEATHROW_FCR, OH_SCCA_IO|OH_SCCB_IO|HRW_SCC_ENABLE);
+
+ /* Let things settle */
+ (void)MACIO_IN32(HEATHROW_FCR);
+}
+
+static void heathrow_wakeup(struct macio_chip *macio, int secondary)
+{
+ if (secondary) {
+ MACIO_OUT32(0x38, save_fcr[2]);
+ (void)MACIO_IN32(0x38);
+ mdelay(1);
+ MACIO_OUT32(0x3c, save_fcr[3]);
+ (void)MACIO_IN32(0x38);
+ mdelay(10);
+ dbdma_restore(macio, save_alt_dbdma);
+ } else {
+ MACIO_OUT32(0x38, save_fcr[0] | HRW_IOBUS_ENABLE);
+ (void)MACIO_IN32(0x38);
+ mdelay(1);
+ MACIO_OUT32(0x3c, save_fcr[1]);
+ (void)MACIO_IN32(0x38);
+ mdelay(1);
+ MACIO_OUT32(0x34, save_mbcr);
+ (void)MACIO_IN32(0x38);
+ mdelay(10);
+ dbdma_restore(macio, save_dbdma);
+ }
+}
+
+static long heathrow_sleep_state(struct device_node *node, long param,
+ long value)
+{
+ if ((pmac_mb.board_flags & PMAC_MB_CAN_SLEEP) == 0)
+ return -EPERM;
+ if (value == 1) {
+ if (macio_chips[1].type == macio_gatwick)
+ heathrow_sleep(&macio_chips[0], 1);
+ heathrow_sleep(&macio_chips[0], 0);
+ } else if (value == 0) {
+ heathrow_wakeup(&macio_chips[0], 0);
+ if (macio_chips[1].type == macio_gatwick)
+ heathrow_wakeup(&macio_chips[0], 1);
+ }
+ return 0;
+}
+
+static long core99_scc_enable(struct device_node *node, long param, long value)
+{
+ struct macio_chip* macio;
+ unsigned long flags;
+ unsigned long chan_mask;
+ u32 fcr;
+
+ macio = macio_find(node, 0);
+ if (!macio)
+ return -ENODEV;
+ if (!strcmp(node->name, "ch-a"))
+ chan_mask = MACIO_FLAG_SCCA_ON;
+ else if (!strcmp(node->name, "ch-b"))
+ chan_mask = MACIO_FLAG_SCCB_ON;
+ else
+ return -ENODEV;
+
+ if (value) {
+ int need_reset_scc = 0;
+ int need_reset_irda = 0;
+
+ LOCK(flags);
+ fcr = MACIO_IN32(KEYLARGO_FCR0);
+ /* Check if scc cell need enabling */
+ if (!(fcr & KL0_SCC_CELL_ENABLE)) {
+ fcr |= KL0_SCC_CELL_ENABLE;
+ need_reset_scc = 1;
+ }
+ if (chan_mask & MACIO_FLAG_SCCA_ON) {
+ fcr |= KL0_SCCA_ENABLE;
+ /* Don't enable line drivers for I2S modem */
+ if ((param & 0xfff) == PMAC_SCC_I2S1)
+ fcr &= ~KL0_SCC_A_INTF_ENABLE;
+ else
+ fcr |= KL0_SCC_A_INTF_ENABLE;
+ }
+ if (chan_mask & MACIO_FLAG_SCCB_ON) {
+ fcr |= KL0_SCCB_ENABLE;
+ /* Perform irda specific inits */
+ if ((param & 0xfff) == PMAC_SCC_IRDA) {
+ fcr &= ~KL0_SCC_B_INTF_ENABLE;
+ fcr |= KL0_IRDA_ENABLE;
+ fcr |= KL0_IRDA_CLK32_ENABLE | KL0_IRDA_CLK19_ENABLE;
+ fcr |= KL0_IRDA_SOURCE1_SEL;
+ fcr &= ~(KL0_IRDA_FAST_CONNECT|KL0_IRDA_DEFAULT1|KL0_IRDA_DEFAULT0);
+ fcr &= ~(KL0_IRDA_SOURCE2_SEL|KL0_IRDA_HIGH_BAND);
+ need_reset_irda = 1;
+ } else
+ fcr |= KL0_SCC_B_INTF_ENABLE;
+ }
+ MACIO_OUT32(KEYLARGO_FCR0, fcr);
+ macio->flags |= chan_mask;
+ if (need_reset_scc) {
+ MACIO_BIS(KEYLARGO_FCR0, KL0_SCC_RESET);
+ (void)MACIO_IN32(KEYLARGO_FCR0);
+ UNLOCK(flags);
+ mdelay(15);
+ LOCK(flags);
+ MACIO_BIC(KEYLARGO_FCR0, KL0_SCC_RESET);
+ }
+ if (need_reset_irda) {
+ MACIO_BIS(KEYLARGO_FCR0, KL0_IRDA_RESET);
+ (void)MACIO_IN32(KEYLARGO_FCR0);
+ UNLOCK(flags);
+ mdelay(15);
+ LOCK(flags);
+ MACIO_BIC(KEYLARGO_FCR0, KL0_IRDA_RESET);
+ }
+ UNLOCK(flags);
+ if (param & PMAC_SCC_FLAG_XMON)
+ macio->flags |= MACIO_FLAG_SCC_LOCKED;
+ } else {
+ if (macio->flags & MACIO_FLAG_SCC_LOCKED)
+ return -EPERM;
+ LOCK(flags);
+ fcr = MACIO_IN32(KEYLARGO_FCR0);
+ if (chan_mask & MACIO_FLAG_SCCA_ON)
+ fcr &= ~KL0_SCCA_ENABLE;
+ if (chan_mask & MACIO_FLAG_SCCB_ON) {
+ fcr &= ~KL0_SCCB_ENABLE;
+ /* Perform irda specific clears */
+ if ((param & 0xfff) == PMAC_SCC_IRDA) {
+ fcr &= ~KL0_IRDA_ENABLE;
+ fcr &= ~(KL0_IRDA_CLK32_ENABLE | KL0_IRDA_CLK19_ENABLE);
+ fcr &= ~(KL0_IRDA_FAST_CONNECT|KL0_IRDA_DEFAULT1|KL0_IRDA_DEFAULT0);
+ fcr &= ~(KL0_IRDA_SOURCE1_SEL|KL0_IRDA_SOURCE2_SEL|KL0_IRDA_HIGH_BAND);
+ }
+ }
+ MACIO_OUT32(KEYLARGO_FCR0, fcr);
+ if ((fcr & (KL0_SCCA_ENABLE | KL0_SCCB_ENABLE)) == 0) {
+ fcr &= ~KL0_SCC_CELL_ENABLE;
+ MACIO_OUT32(KEYLARGO_FCR0, fcr);
+ }
+ macio->flags &= ~(chan_mask);
+ UNLOCK(flags);
+ mdelay(10);
+ }
+ return 0;
+}
+
+static long
+core99_modem_enable(struct device_node *node, long param, long value)
+{
+ struct macio_chip* macio;
+ u8 gpio;
+ unsigned long flags;
+
+ /* Hack for internal USB modem */
+ if (node == NULL) {
+ if (macio_chips[0].type != macio_keylargo)
+ return -ENODEV;
+ node = macio_chips[0].of_node;
+ }
+ macio = macio_find(node, 0);
+ if (!macio)
+ return -ENODEV;
+ gpio = MACIO_IN8(KL_GPIO_MODEM_RESET);
+ gpio |= KEYLARGO_GPIO_OUTPUT_ENABLE;
+ gpio &= ~KEYLARGO_GPIO_OUTOUT_DATA;
+
+ if (!value) {
+ LOCK(flags);
+ MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio);
+ UNLOCK(flags);
+ (void)MACIO_IN8(KL_GPIO_MODEM_RESET);
+ mdelay(250);
+ }
+ LOCK(flags);
+ if (value) {
+ MACIO_BIC(KEYLARGO_FCR2, KL2_ALT_DATA_OUT);
+ UNLOCK(flags);
+ (void)MACIO_IN32(KEYLARGO_FCR2);
+ mdelay(250);
+ } else {
+ MACIO_BIS(KEYLARGO_FCR2, KL2_ALT_DATA_OUT);
+ UNLOCK(flags);
+ }
+ if (value) {
+ LOCK(flags);
+ MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio | KEYLARGO_GPIO_OUTOUT_DATA);
+ (void)MACIO_IN8(KL_GPIO_MODEM_RESET);
+ UNLOCK(flags); mdelay(250); LOCK(flags);
+ MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio);
+ (void)MACIO_IN8(KL_GPIO_MODEM_RESET);
+ UNLOCK(flags); mdelay(250); LOCK(flags);
+ MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio | KEYLARGO_GPIO_OUTOUT_DATA);
+ (void)MACIO_IN8(KL_GPIO_MODEM_RESET);
+ UNLOCK(flags); mdelay(250);
+ }
+ return 0;
+}
+
+static long
+pangea_modem_enable(struct device_node *node, long param, long value)
+{
+ struct macio_chip* macio;
+ u8 gpio;
+ unsigned long flags;
+
+ /* Hack for internal USB modem */
+ if (node == NULL) {
+ if (macio_chips[0].type != macio_pangea &&
+ macio_chips[0].type != macio_intrepid)
+ return -ENODEV;
+ node = macio_chips[0].of_node;
+ }
+ macio = macio_find(node, 0);
+ if (!macio)
+ return -ENODEV;
+ gpio = MACIO_IN8(KL_GPIO_MODEM_RESET);
+ gpio |= KEYLARGO_GPIO_OUTPUT_ENABLE;
+ gpio &= ~KEYLARGO_GPIO_OUTOUT_DATA;
+
+ if (!value) {
+ LOCK(flags);
+ MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio);
+ UNLOCK(flags);
+ (void)MACIO_IN8(KL_GPIO_MODEM_RESET);
+ mdelay(250);
+ }
+ LOCK(flags);
+ if (value) {
+ MACIO_OUT8(KL_GPIO_MODEM_POWER,
+ KEYLARGO_GPIO_OUTPUT_ENABLE);
+ UNLOCK(flags);
+ (void)MACIO_IN32(KEYLARGO_FCR2);
+ mdelay(250);
+ } else {
+ MACIO_OUT8(KL_GPIO_MODEM_POWER,
+ KEYLARGO_GPIO_OUTPUT_ENABLE | KEYLARGO_GPIO_OUTOUT_DATA);
+ UNLOCK(flags);
+ }
+ if (value) {
+ LOCK(flags);
+ MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio | KEYLARGO_GPIO_OUTOUT_DATA);
+ (void)MACIO_IN8(KL_GPIO_MODEM_RESET);
+ UNLOCK(flags); mdelay(250); LOCK(flags);
+ MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio);
+ (void)MACIO_IN8(KL_GPIO_MODEM_RESET);
+ UNLOCK(flags); mdelay(250); LOCK(flags);
+ MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio | KEYLARGO_GPIO_OUTOUT_DATA);
+ (void)MACIO_IN8(KL_GPIO_MODEM_RESET);
+ UNLOCK(flags); mdelay(250);
+ }
+ return 0;
+}
+
+static long
+core99_ata100_enable(struct device_node *node, long value)
+{
+ unsigned long flags;
+ struct pci_dev *pdev = NULL;
+ u8 pbus, pid;
+ int rc;
+
+ if (uninorth_rev < 0x24)
+ return -ENODEV;
+
+ LOCK(flags);
+ if (value)
+ UN_BIS(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_ATA100);
+ else
+ UN_BIC(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_ATA100);
+ (void)UN_IN(UNI_N_CLOCK_CNTL);
+ UNLOCK(flags);
+ udelay(20);
+
+ if (value) {
+ if (pci_device_from_OF_node(node, &pbus, &pid) == 0)
+ pdev = pci_get_bus_and_slot(pbus, pid);
+ if (pdev == NULL)
+ return 0;
+ rc = pci_enable_device(pdev);
+ if (rc == 0)
+ pci_set_master(pdev);
+ pci_dev_put(pdev);
+ if (rc)
+ return rc;
+ }
+ return 0;
+}
+
+static long
+core99_ide_enable(struct device_node *node, long param, long value)
+{
+ /* Bus ID 0 to 2 are KeyLargo based IDE, busID 3 is U2
+ * based ata-100
+ */
+ switch(param) {
+ case 0:
+ return simple_feature_tweak(node, macio_unknown,
+ KEYLARGO_FCR1, KL1_EIDE0_ENABLE, value);
+ case 1:
+ return simple_feature_tweak(node, macio_unknown,
+ KEYLARGO_FCR1, KL1_EIDE1_ENABLE, value);
+ case 2:
+ return simple_feature_tweak(node, macio_unknown,
+ KEYLARGO_FCR1, KL1_UIDE_ENABLE, value);
+ case 3:
+ return core99_ata100_enable(node, value);
+ default:
+ return -ENODEV;
+ }
+}
+
+static long
+core99_ide_reset(struct device_node *node, long param, long value)
+{
+ switch(param) {
+ case 0:
+ return simple_feature_tweak(node, macio_unknown,
+ KEYLARGO_FCR1, KL1_EIDE0_RESET_N, !value);
+ case 1:
+ return simple_feature_tweak(node, macio_unknown,
+ KEYLARGO_FCR1, KL1_EIDE1_RESET_N, !value);
+ case 2:
+ return simple_feature_tweak(node, macio_unknown,
+ KEYLARGO_FCR1, KL1_UIDE_RESET_N, !value);
+ default:
+ return -ENODEV;
+ }
+}
+
+static long
+core99_gmac_enable(struct device_node *node, long param, long value)
+{
+ unsigned long flags;
+
+ LOCK(flags);
+ if (value)
+ UN_BIS(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_GMAC);
+ else
+ UN_BIC(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_GMAC);
+ (void)UN_IN(UNI_N_CLOCK_CNTL);
+ UNLOCK(flags);
+ udelay(20);
+
+ return 0;
+}
+
+static long
+core99_gmac_phy_reset(struct device_node *node, long param, long value)
+{
+ unsigned long flags;
+ struct macio_chip *macio;
+
+ macio = &macio_chips[0];
+ if (macio->type != macio_keylargo && macio->type != macio_pangea &&
+ macio->type != macio_intrepid)
+ return -ENODEV;
+
+ LOCK(flags);
+ MACIO_OUT8(KL_GPIO_ETH_PHY_RESET, KEYLARGO_GPIO_OUTPUT_ENABLE);
+ (void)MACIO_IN8(KL_GPIO_ETH_PHY_RESET);
+ UNLOCK(flags);
+ mdelay(10);
+ LOCK(flags);
+ MACIO_OUT8(KL_GPIO_ETH_PHY_RESET, /*KEYLARGO_GPIO_OUTPUT_ENABLE | */
+ KEYLARGO_GPIO_OUTOUT_DATA);
+ UNLOCK(flags);
+ mdelay(10);
+
+ return 0;
+}
+
+static long
+core99_sound_chip_enable(struct device_node *node, long param, long value)
+{
+ struct macio_chip* macio;
+ unsigned long flags;
+
+ macio = macio_find(node, 0);
+ if (!macio)
+ return -ENODEV;
+
+ /* Do a better probe code, screamer G4 desktops &
+ * iMacs can do that too, add a recalibrate in
+ * the driver as well
+ */
+ if (pmac_mb.model_id == PMAC_TYPE_PISMO ||
+ pmac_mb.model_id == PMAC_TYPE_TITANIUM) {
+ LOCK(flags);
+ if (value)
+ MACIO_OUT8(KL_GPIO_SOUND_POWER,
+ KEYLARGO_GPIO_OUTPUT_ENABLE |
+ KEYLARGO_GPIO_OUTOUT_DATA);
+ else
+ MACIO_OUT8(KL_GPIO_SOUND_POWER,
+ KEYLARGO_GPIO_OUTPUT_ENABLE);
+ (void)MACIO_IN8(KL_GPIO_SOUND_POWER);
+ UNLOCK(flags);
+ }
+ return 0;
+}
+
+static long
+core99_airport_enable(struct device_node *node, long param, long value)
+{
+ struct macio_chip* macio;
+ unsigned long flags;
+ int state;
+
+ macio = macio_find(node, 0);
+ if (!macio)
+ return -ENODEV;
+
+ /* Hint: we allow passing of macio itself for the sake of the
+ * sleep code
+ */
+ if (node != macio->of_node &&
+ (!node->parent || node->parent != macio->of_node))
+ return -ENODEV;
+ state = (macio->flags & MACIO_FLAG_AIRPORT_ON) != 0;
+ if (value == state)
+ return 0;
+ if (value) {
+ /* This code is a reproduction of OF enable-cardslot
+ * and init-wireless methods, slightly hacked until
+ * I got it working.
+ */
+ LOCK(flags);
+ MACIO_OUT8(KEYLARGO_GPIO_0+0xf, 5);
+ (void)MACIO_IN8(KEYLARGO_GPIO_0+0xf);
+ UNLOCK(flags);
+ mdelay(10);
+ LOCK(flags);
+ MACIO_OUT8(KEYLARGO_GPIO_0+0xf, 4);
+ (void)MACIO_IN8(KEYLARGO_GPIO_0+0xf);
+ UNLOCK(flags);
+
+ mdelay(10);
+
+ LOCK(flags);
+ MACIO_BIC(KEYLARGO_FCR2, KL2_CARDSEL_16);
+ (void)MACIO_IN32(KEYLARGO_FCR2);
+ udelay(10);
+ MACIO_OUT8(KEYLARGO_GPIO_EXTINT_0+0xb, 0);
+ (void)MACIO_IN8(KEYLARGO_GPIO_EXTINT_0+0xb);
+ udelay(10);
+ MACIO_OUT8(KEYLARGO_GPIO_EXTINT_0+0xa, 0x28);
+ (void)MACIO_IN8(KEYLARGO_GPIO_EXTINT_0+0xa);
+ udelay(10);
+ MACIO_OUT8(KEYLARGO_GPIO_EXTINT_0+0xd, 0x28);
+ (void)MACIO_IN8(KEYLARGO_GPIO_EXTINT_0+0xd);
+ udelay(10);
+ MACIO_OUT8(KEYLARGO_GPIO_0+0xd, 0x28);
+ (void)MACIO_IN8(KEYLARGO_GPIO_0+0xd);
+ udelay(10);
+ MACIO_OUT8(KEYLARGO_GPIO_0+0xe, 0x28);
+ (void)MACIO_IN8(KEYLARGO_GPIO_0+0xe);
+ UNLOCK(flags);
+ udelay(10);
+ MACIO_OUT32(0x1c000, 0);
+ mdelay(1);
+ MACIO_OUT8(0x1a3e0, 0x41);
+ (void)MACIO_IN8(0x1a3e0);
+ udelay(10);
+ LOCK(flags);
+ MACIO_BIS(KEYLARGO_FCR2, KL2_CARDSEL_16);
+ (void)MACIO_IN32(KEYLARGO_FCR2);
+ UNLOCK(flags);
+ mdelay(100);
+
+ macio->flags |= MACIO_FLAG_AIRPORT_ON;
+ } else {
+ LOCK(flags);
+ MACIO_BIC(KEYLARGO_FCR2, KL2_CARDSEL_16);
+ (void)MACIO_IN32(KEYLARGO_FCR2);
+ MACIO_OUT8(KL_GPIO_AIRPORT_0, 0);
+ MACIO_OUT8(KL_GPIO_AIRPORT_1, 0);
+ MACIO_OUT8(KL_GPIO_AIRPORT_2, 0);
+ MACIO_OUT8(KL_GPIO_AIRPORT_3, 0);
+ MACIO_OUT8(KL_GPIO_AIRPORT_4, 0);
+ (void)MACIO_IN8(KL_GPIO_AIRPORT_4);
+ UNLOCK(flags);
+
+ macio->flags &= ~MACIO_FLAG_AIRPORT_ON;
+ }
+ return 0;
+}
+
+#ifdef CONFIG_SMP
+static long
+core99_reset_cpu(struct device_node *node, long param, long value)
+{
+ unsigned int reset_io = 0;
+ unsigned long flags;
+ struct macio_chip *macio;
+ struct device_node *np;
+ struct device_node *cpus;
+ const int dflt_reset_lines[] = { KL_GPIO_RESET_CPU0,
+ KL_GPIO_RESET_CPU1,
+ KL_GPIO_RESET_CPU2,
+ KL_GPIO_RESET_CPU3 };
+
+ macio = &macio_chips[0];
+ if (macio->type != macio_keylargo)
+ return -ENODEV;
+
+ cpus = of_find_node_by_path("/cpus");
+ if (cpus == NULL)
+ return -ENODEV;
+ for (np = cpus->child; np != NULL; np = np->sibling) {
+ const u32 *num = of_get_property(np, "reg", NULL);
+ const u32 *rst = of_get_property(np, "soft-reset", NULL);
+ if (num == NULL || rst == NULL)
+ continue;
+ if (param == *num) {
+ reset_io = *rst;
+ break;
+ }
+ }
+ of_node_put(cpus);
+ if (np == NULL || reset_io == 0)
+ reset_io = dflt_reset_lines[param];
+
+ LOCK(flags);
+ MACIO_OUT8(reset_io, KEYLARGO_GPIO_OUTPUT_ENABLE);
+ (void)MACIO_IN8(reset_io);
+ udelay(1);
+ MACIO_OUT8(reset_io, 0);
+ (void)MACIO_IN8(reset_io);
+ UNLOCK(flags);
+
+ return 0;
+}
+#endif /* CONFIG_SMP */
+
+static long
+core99_usb_enable(struct device_node *node, long param, long value)
+{
+ struct macio_chip *macio;
+ unsigned long flags;
+ const char *prop;
+ int number;
+ u32 reg;
+
+ macio = &macio_chips[0];
+ if (macio->type != macio_keylargo && macio->type != macio_pangea &&
+ macio->type != macio_intrepid)
+ return -ENODEV;
+
+ prop = of_get_property(node, "AAPL,clock-id", NULL);
+ if (!prop)
+ return -ENODEV;
+ if (strncmp(prop, "usb0u048", 8) == 0)
+ number = 0;
+ else if (strncmp(prop, "usb1u148", 8) == 0)
+ number = 2;
+ else if (strncmp(prop, "usb2u248", 8) == 0)
+ number = 4;
+ else
+ return -ENODEV;
+
+ /* Sorry for the brute-force locking, but this is only used during
+ * sleep and the timing seem to be critical
+ */
+ LOCK(flags);
+ if (value) {
+ /* Turn ON */
+ if (number == 0) {
+ MACIO_BIC(KEYLARGO_FCR0, (KL0_USB0_PAD_SUSPEND0 | KL0_USB0_PAD_SUSPEND1));
+ (void)MACIO_IN32(KEYLARGO_FCR0);
+ UNLOCK(flags);
+ mdelay(1);
+ LOCK(flags);
+ MACIO_BIS(KEYLARGO_FCR0, KL0_USB0_CELL_ENABLE);
+ } else if (number == 2) {
+ MACIO_BIC(KEYLARGO_FCR0, (KL0_USB1_PAD_SUSPEND0 | KL0_USB1_PAD_SUSPEND1));
+ UNLOCK(flags);
+ (void)MACIO_IN32(KEYLARGO_FCR0);
+ mdelay(1);
+ LOCK(flags);
+ MACIO_BIS(KEYLARGO_FCR0, KL0_USB1_CELL_ENABLE);
+ } else if (number == 4) {
+ MACIO_BIC(KEYLARGO_FCR1, (KL1_USB2_PAD_SUSPEND0 | KL1_USB2_PAD_SUSPEND1));
+ UNLOCK(flags);
+ (void)MACIO_IN32(KEYLARGO_FCR1);
+ mdelay(1);
+ LOCK(flags);
+ MACIO_BIS(KEYLARGO_FCR1, KL1_USB2_CELL_ENABLE);
+ }
+ if (number < 4) {
+ reg = MACIO_IN32(KEYLARGO_FCR4);
+ reg &= ~(KL4_PORT_WAKEUP_ENABLE(number) | KL4_PORT_RESUME_WAKE_EN(number) |
+ KL4_PORT_CONNECT_WAKE_EN(number) | KL4_PORT_DISCONNECT_WAKE_EN(number));
+ reg &= ~(KL4_PORT_WAKEUP_ENABLE(number+1) | KL4_PORT_RESUME_WAKE_EN(number+1) |
+ KL4_PORT_CONNECT_WAKE_EN(number+1) | KL4_PORT_DISCONNECT_WAKE_EN(number+1));
+ MACIO_OUT32(KEYLARGO_FCR4, reg);
+ (void)MACIO_IN32(KEYLARGO_FCR4);
+ udelay(10);
+ } else {
+ reg = MACIO_IN32(KEYLARGO_FCR3);
+ reg &= ~(KL3_IT_PORT_WAKEUP_ENABLE(0) | KL3_IT_PORT_RESUME_WAKE_EN(0) |
+ KL3_IT_PORT_CONNECT_WAKE_EN(0) | KL3_IT_PORT_DISCONNECT_WAKE_EN(0));
+ reg &= ~(KL3_IT_PORT_WAKEUP_ENABLE(1) | KL3_IT_PORT_RESUME_WAKE_EN(1) |
+ KL3_IT_PORT_CONNECT_WAKE_EN(1) | KL3_IT_PORT_DISCONNECT_WAKE_EN(1));
+ MACIO_OUT32(KEYLARGO_FCR3, reg);
+ (void)MACIO_IN32(KEYLARGO_FCR3);
+ udelay(10);
+ }
+ if (macio->type == macio_intrepid) {
+ /* wait for clock stopped bits to clear */
+ u32 test0 = 0, test1 = 0;
+ u32 status0, status1;
+ int timeout = 1000;
+
+ UNLOCK(flags);
+ switch (number) {
+ case 0:
+ test0 = UNI_N_CLOCK_STOPPED_USB0;
+ test1 = UNI_N_CLOCK_STOPPED_USB0PCI;
+ break;
+ case 2:
+ test0 = UNI_N_CLOCK_STOPPED_USB1;
+ test1 = UNI_N_CLOCK_STOPPED_USB1PCI;
+ break;
+ case 4:
+ test0 = UNI_N_CLOCK_STOPPED_USB2;
+ test1 = UNI_N_CLOCK_STOPPED_USB2PCI;
+ break;
+ }
+ do {
+ if (--timeout <= 0) {
+ printk(KERN_ERR "core99_usb_enable: "
+ "Timeout waiting for clocks\n");
+ break;
+ }
+ mdelay(1);
+ status0 = UN_IN(UNI_N_CLOCK_STOP_STATUS0);
+ status1 = UN_IN(UNI_N_CLOCK_STOP_STATUS1);
+ } while ((status0 & test0) | (status1 & test1));
+ LOCK(flags);
+ }
+ } else {
+ /* Turn OFF */
+ if (number < 4) {
+ reg = MACIO_IN32(KEYLARGO_FCR4);
+ reg |= KL4_PORT_WAKEUP_ENABLE(number) | KL4_PORT_RESUME_WAKE_EN(number) |
+ KL4_PORT_CONNECT_WAKE_EN(number) | KL4_PORT_DISCONNECT_WAKE_EN(number);
+ reg |= KL4_PORT_WAKEUP_ENABLE(number+1) | KL4_PORT_RESUME_WAKE_EN(number+1) |
+ KL4_PORT_CONNECT_WAKE_EN(number+1) | KL4_PORT_DISCONNECT_WAKE_EN(number+1);
+ MACIO_OUT32(KEYLARGO_FCR4, reg);
+ (void)MACIO_IN32(KEYLARGO_FCR4);
+ udelay(1);
+ } else {
+ reg = MACIO_IN32(KEYLARGO_FCR3);
+ reg |= KL3_IT_PORT_WAKEUP_ENABLE(0) | KL3_IT_PORT_RESUME_WAKE_EN(0) |
+ KL3_IT_PORT_CONNECT_WAKE_EN(0) | KL3_IT_PORT_DISCONNECT_WAKE_EN(0);
+ reg |= KL3_IT_PORT_WAKEUP_ENABLE(1) | KL3_IT_PORT_RESUME_WAKE_EN(1) |
+ KL3_IT_PORT_CONNECT_WAKE_EN(1) | KL3_IT_PORT_DISCONNECT_WAKE_EN(1);
+ MACIO_OUT32(KEYLARGO_FCR3, reg);
+ (void)MACIO_IN32(KEYLARGO_FCR3);
+ udelay(1);
+ }
+ if (number == 0) {
+ if (macio->type != macio_intrepid)
+ MACIO_BIC(KEYLARGO_FCR0, KL0_USB0_CELL_ENABLE);
+ (void)MACIO_IN32(KEYLARGO_FCR0);
+ udelay(1);
+ MACIO_BIS(KEYLARGO_FCR0, (KL0_USB0_PAD_SUSPEND0 | KL0_USB0_PAD_SUSPEND1));
+ (void)MACIO_IN32(KEYLARGO_FCR0);
+ } else if (number == 2) {
+ if (macio->type != macio_intrepid)
+ MACIO_BIC(KEYLARGO_FCR0, KL0_USB1_CELL_ENABLE);
+ (void)MACIO_IN32(KEYLARGO_FCR0);
+ udelay(1);
+ MACIO_BIS(KEYLARGO_FCR0, (KL0_USB1_PAD_SUSPEND0 | KL0_USB1_PAD_SUSPEND1));
+ (void)MACIO_IN32(KEYLARGO_FCR0);
+ } else if (number == 4) {
+ udelay(1);
+ MACIO_BIS(KEYLARGO_FCR1, (KL1_USB2_PAD_SUSPEND0 | KL1_USB2_PAD_SUSPEND1));
+ (void)MACIO_IN32(KEYLARGO_FCR1);
+ }
+ udelay(1);
+ }
+ UNLOCK(flags);
+
+ return 0;
+}
+
+static long
+core99_firewire_enable(struct device_node *node, long param, long value)
+{
+ unsigned long flags;
+ struct macio_chip *macio;
+
+ macio = &macio_chips[0];
+ if (macio->type != macio_keylargo && macio->type != macio_pangea &&
+ macio->type != macio_intrepid)
+ return -ENODEV;
+ if (!(macio->flags & MACIO_FLAG_FW_SUPPORTED))
+ return -ENODEV;
+
+ LOCK(flags);
+ if (value) {
+ UN_BIS(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_FW);
+ (void)UN_IN(UNI_N_CLOCK_CNTL);
+ } else {
+ UN_BIC(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_FW);
+ (void)UN_IN(UNI_N_CLOCK_CNTL);
+ }
+ UNLOCK(flags);
+ mdelay(1);
+
+ return 0;
+}
+
+static long
+core99_firewire_cable_power(struct device_node *node, long param, long value)
+{
+ unsigned long flags;
+ struct macio_chip *macio;
+
+ /* Trick: we allow NULL node */
+ if ((pmac_mb.board_flags & PMAC_MB_HAS_FW_POWER) == 0)
+ return -ENODEV;
+ macio = &macio_chips[0];
+ if (macio->type != macio_keylargo && macio->type != macio_pangea &&
+ macio->type != macio_intrepid)
+ return -ENODEV;
+ if (!(macio->flags & MACIO_FLAG_FW_SUPPORTED))
+ return -ENODEV;
+
+ LOCK(flags);
+ if (value) {
+ MACIO_OUT8(KL_GPIO_FW_CABLE_POWER , 0);
+ MACIO_IN8(KL_GPIO_FW_CABLE_POWER);
+ udelay(10);
+ } else {
+ MACIO_OUT8(KL_GPIO_FW_CABLE_POWER , 4);
+ MACIO_IN8(KL_GPIO_FW_CABLE_POWER); udelay(10);
+ }
+ UNLOCK(flags);
+ mdelay(1);
+
+ return 0;
+}
+
+static long
+intrepid_aack_delay_enable(struct device_node *node, long param, long value)
+{
+ unsigned long flags;
+
+ if (uninorth_rev < 0xd2)
+ return -ENODEV;
+
+ LOCK(flags);
+ if (param)
+ UN_BIS(UNI_N_AACK_DELAY, UNI_N_AACK_DELAY_ENABLE);
+ else
+ UN_BIC(UNI_N_AACK_DELAY, UNI_N_AACK_DELAY_ENABLE);
+ UNLOCK(flags);
+
+ return 0;
+}
+
+
+#endif /* CONFIG_PPC64 */
+
+static long
+core99_read_gpio(struct device_node *node, long param, long value)
+{
+ struct macio_chip *macio = &macio_chips[0];
+
+ return MACIO_IN8(param);
+}
+
+
+static long
+core99_write_gpio(struct device_node *node, long param, long value)
+{
+ struct macio_chip *macio = &macio_chips[0];
+
+ MACIO_OUT8(param, (u8)(value & 0xff));
+ return 0;
+}
+
+#ifdef CONFIG_PPC64
+static long g5_gmac_enable(struct device_node *node, long param, long value)
+{
+ struct macio_chip *macio = &macio_chips[0];
+ unsigned long flags;
+
+ if (node == NULL)
+ return -ENODEV;
+
+ LOCK(flags);
+ if (value) {
+ MACIO_BIS(KEYLARGO_FCR1, K2_FCR1_GMAC_CLK_ENABLE);
+ mb();
+ k2_skiplist[0] = NULL;
+ } else {
+ k2_skiplist[0] = node;
+ mb();
+ MACIO_BIC(KEYLARGO_FCR1, K2_FCR1_GMAC_CLK_ENABLE);
+ }
+
+ UNLOCK(flags);
+ mdelay(1);
+
+ return 0;
+}
+
+static long g5_fw_enable(struct device_node *node, long param, long value)
+{
+ struct macio_chip *macio = &macio_chips[0];
+ unsigned long flags;
+
+ if (node == NULL)
+ return -ENODEV;
+
+ LOCK(flags);
+ if (value) {
+ MACIO_BIS(KEYLARGO_FCR1, K2_FCR1_FW_CLK_ENABLE);
+ mb();
+ k2_skiplist[1] = NULL;
+ } else {
+ k2_skiplist[1] = node;
+ mb();
+ MACIO_BIC(KEYLARGO_FCR1, K2_FCR1_FW_CLK_ENABLE);
+ }
+
+ UNLOCK(flags);
+ mdelay(1);
+
+ return 0;
+}
+
+static long g5_mpic_enable(struct device_node *node, long param, long value)
+{
+ unsigned long flags;
+ struct device_node *parent = of_get_parent(node);
+ int is_u3;
+
+ if (parent == NULL)
+ return 0;
+ is_u3 = strcmp(parent->name, "u3") == 0 ||
+ strcmp(parent->name, "u4") == 0;
+ of_node_put(parent);
+ if (!is_u3)
+ return 0;
+
+ LOCK(flags);
+ UN_BIS(U3_TOGGLE_REG, U3_MPIC_RESET | U3_MPIC_OUTPUT_ENABLE);
+ UNLOCK(flags);
+
+ return 0;
+}
+
+static long g5_eth_phy_reset(struct device_node *node, long param, long value)
+{
+ struct macio_chip *macio = &macio_chips[0];
+ struct device_node *phy;
+ int need_reset;
+
+ /*
+ * We must not reset the combo PHYs, only the BCM5221 found in
+ * the iMac G5.
+ */
+ phy = of_get_next_child(node, NULL);
+ if (!phy)
+ return -ENODEV;
+ need_reset = of_device_is_compatible(phy, "B5221");
+ of_node_put(phy);
+ if (!need_reset)
+ return 0;
+
+ /* PHY reset is GPIO 29, not in device-tree unfortunately */
+ MACIO_OUT8(K2_GPIO_EXTINT_0 + 29,
+ KEYLARGO_GPIO_OUTPUT_ENABLE | KEYLARGO_GPIO_OUTOUT_DATA);
+ /* Thankfully, this is now always called at a time when we can
+ * schedule by sungem.
+ */
+ msleep(10);
+ MACIO_OUT8(K2_GPIO_EXTINT_0 + 29, 0);
+
+ return 0;
+}
+
+static long g5_i2s_enable(struct device_node *node, long param, long value)
+{
+ /* Very crude implementation for now */
+ struct macio_chip *macio = &macio_chips[0];
+ unsigned long flags;
+ int cell;
+ u32 fcrs[3][3] = {
+ { 0,
+ K2_FCR1_I2S0_CELL_ENABLE |
+ K2_FCR1_I2S0_CLK_ENABLE_BIT | K2_FCR1_I2S0_ENABLE,
+ KL3_I2S0_CLK18_ENABLE
+ },
+ { KL0_SCC_A_INTF_ENABLE,
+ K2_FCR1_I2S1_CELL_ENABLE |
+ K2_FCR1_I2S1_CLK_ENABLE_BIT | K2_FCR1_I2S1_ENABLE,
+ KL3_I2S1_CLK18_ENABLE
+ },
+ { KL0_SCC_B_INTF_ENABLE,
+ SH_FCR1_I2S2_CELL_ENABLE |
+ SH_FCR1_I2S2_CLK_ENABLE_BIT | SH_FCR1_I2S2_ENABLE,
+ SH_FCR3_I2S2_CLK18_ENABLE
+ },
+ };
+
+ if (macio->type != macio_keylargo2 && macio->type != macio_shasta)
+ return -ENODEV;
+ if (strncmp(node->name, "i2s-", 4))
+ return -ENODEV;
+ cell = node->name[4] - 'a';
+ switch(cell) {
+ case 0:
+ case 1:
+ break;
+ case 2:
+ if (macio->type == macio_shasta)
+ break;
+ default:
+ return -ENODEV;
+ }
+
+ LOCK(flags);
+ if (value) {
+ MACIO_BIC(KEYLARGO_FCR0, fcrs[cell][0]);
+ MACIO_BIS(KEYLARGO_FCR1, fcrs[cell][1]);
+ MACIO_BIS(KEYLARGO_FCR3, fcrs[cell][2]);
+ } else {
+ MACIO_BIC(KEYLARGO_FCR3, fcrs[cell][2]);
+ MACIO_BIC(KEYLARGO_FCR1, fcrs[cell][1]);
+ MACIO_BIS(KEYLARGO_FCR0, fcrs[cell][0]);
+ }
+ udelay(10);
+ UNLOCK(flags);
+
+ return 0;
+}
+
+
+#ifdef CONFIG_SMP
+static long g5_reset_cpu(struct device_node *node, long param, long value)
+{
+ unsigned int reset_io = 0;
+ unsigned long flags;
+ struct macio_chip *macio;
+ struct device_node *np;
+ struct device_node *cpus;
+
+ macio = &macio_chips[0];
+ if (macio->type != macio_keylargo2 && macio->type != macio_shasta)
+ return -ENODEV;
+
+ cpus = of_find_node_by_path("/cpus");
+ if (cpus == NULL)
+ return -ENODEV;
+ for (np = cpus->child; np != NULL; np = np->sibling) {
+ const u32 *num = of_get_property(np, "reg", NULL);
+ const u32 *rst = of_get_property(np, "soft-reset", NULL);
+ if (num == NULL || rst == NULL)
+ continue;
+ if (param == *num) {
+ reset_io = *rst;
+ break;
+ }
+ }
+ of_node_put(cpus);
+ if (np == NULL || reset_io == 0)
+ return -ENODEV;
+
+ LOCK(flags);
+ MACIO_OUT8(reset_io, KEYLARGO_GPIO_OUTPUT_ENABLE);
+ (void)MACIO_IN8(reset_io);
+ udelay(1);
+ MACIO_OUT8(reset_io, 0);
+ (void)MACIO_IN8(reset_io);
+ UNLOCK(flags);
+
+ return 0;
+}
+#endif /* CONFIG_SMP */
+
+/*
+ * This can be called from pmac_smp so isn't static
+ *
+ * This takes the second CPU off the bus on dual CPU machines
+ * running UP
+ */
+void g5_phy_disable_cpu1(void)
+{
+ if (uninorth_maj == 3)
+ UN_OUT(U3_API_PHY_CONFIG_1, 0);
+}
+#endif /* CONFIG_PPC64 */
+
+#ifndef CONFIG_PPC64
+
+
+#ifdef CONFIG_PM
+static u32 save_gpio_levels[2];
+static u8 save_gpio_extint[KEYLARGO_GPIO_EXTINT_CNT];
+static u8 save_gpio_normal[KEYLARGO_GPIO_CNT];
+static u32 save_unin_clock_ctl;
+
+static void keylargo_shutdown(struct macio_chip *macio, int sleep_mode)
+{
+ u32 temp;
+
+ if (sleep_mode) {
+ mdelay(1);
+ MACIO_BIS(KEYLARGO_FCR0, KL0_USB_REF_SUSPEND);
+ (void)MACIO_IN32(KEYLARGO_FCR0);
+ mdelay(1);
+ }
+
+ MACIO_BIC(KEYLARGO_FCR0,KL0_SCCA_ENABLE | KL0_SCCB_ENABLE |
+ KL0_SCC_CELL_ENABLE |
+ KL0_IRDA_ENABLE | KL0_IRDA_CLK32_ENABLE |
+ KL0_IRDA_CLK19_ENABLE);
+
+ MACIO_BIC(KEYLARGO_MBCR, KL_MBCR_MB0_DEV_MASK);
+ MACIO_BIS(KEYLARGO_MBCR, KL_MBCR_MB0_IDE_ENABLE);
+
+ MACIO_BIC(KEYLARGO_FCR1,
+ KL1_AUDIO_SEL_22MCLK | KL1_AUDIO_CLK_ENABLE_BIT |
+ KL1_AUDIO_CLK_OUT_ENABLE | KL1_AUDIO_CELL_ENABLE |
+ KL1_I2S0_CELL_ENABLE | KL1_I2S0_CLK_ENABLE_BIT |
+ KL1_I2S0_ENABLE | KL1_I2S1_CELL_ENABLE |
+ KL1_I2S1_CLK_ENABLE_BIT | KL1_I2S1_ENABLE |
+ KL1_EIDE0_ENABLE | KL1_EIDE0_RESET_N |
+ KL1_EIDE1_ENABLE | KL1_EIDE1_RESET_N |
+ KL1_UIDE_ENABLE);
+
+ MACIO_BIS(KEYLARGO_FCR2, KL2_ALT_DATA_OUT);
+ MACIO_BIC(KEYLARGO_FCR2, KL2_IOBUS_ENABLE);
+
+ temp = MACIO_IN32(KEYLARGO_FCR3);
+ if (macio->rev >= 2) {
+ temp |= KL3_SHUTDOWN_PLL2X;
+ if (sleep_mode)
+ temp |= KL3_SHUTDOWN_PLL_TOTAL;
+ }
+
+ temp |= KL3_SHUTDOWN_PLLKW6 | KL3_SHUTDOWN_PLLKW4 |
+ KL3_SHUTDOWN_PLLKW35;
+ if (sleep_mode)
+ temp |= KL3_SHUTDOWN_PLLKW12;
+ temp &= ~(KL3_CLK66_ENABLE | KL3_CLK49_ENABLE | KL3_CLK45_ENABLE
+ | KL3_CLK31_ENABLE | KL3_I2S1_CLK18_ENABLE | KL3_I2S0_CLK18_ENABLE);
+ if (sleep_mode)
+ temp &= ~(KL3_TIMER_CLK18_ENABLE | KL3_VIA_CLK16_ENABLE);
+ MACIO_OUT32(KEYLARGO_FCR3, temp);
+
+ /* Flush posted writes & wait a bit */
+ (void)MACIO_IN32(KEYLARGO_FCR0); mdelay(1);
+}
+
+static void pangea_shutdown(struct macio_chip *macio, int sleep_mode)
+{
+ u32 temp;
+
+ MACIO_BIC(KEYLARGO_FCR0,KL0_SCCA_ENABLE | KL0_SCCB_ENABLE |
+ KL0_SCC_CELL_ENABLE |
+ KL0_USB0_CELL_ENABLE | KL0_USB1_CELL_ENABLE);
+
+ MACIO_BIC(KEYLARGO_FCR1,
+ KL1_AUDIO_SEL_22MCLK | KL1_AUDIO_CLK_ENABLE_BIT |
+ KL1_AUDIO_CLK_OUT_ENABLE | KL1_AUDIO_CELL_ENABLE |
+ KL1_I2S0_CELL_ENABLE | KL1_I2S0_CLK_ENABLE_BIT |
+ KL1_I2S0_ENABLE | KL1_I2S1_CELL_ENABLE |
+ KL1_I2S1_CLK_ENABLE_BIT | KL1_I2S1_ENABLE |
+ KL1_UIDE_ENABLE);
+ if (pmac_mb.board_flags & PMAC_MB_MOBILE)
+ MACIO_BIC(KEYLARGO_FCR1, KL1_UIDE_RESET_N);
+
+ MACIO_BIS(KEYLARGO_FCR2, KL2_ALT_DATA_OUT);
+
+ temp = MACIO_IN32(KEYLARGO_FCR3);
+ temp |= KL3_SHUTDOWN_PLLKW6 | KL3_SHUTDOWN_PLLKW4 |
+ KL3_SHUTDOWN_PLLKW35;
+ temp &= ~(KL3_CLK49_ENABLE | KL3_CLK45_ENABLE | KL3_CLK31_ENABLE
+ | KL3_I2S0_CLK18_ENABLE | KL3_I2S1_CLK18_ENABLE);
+ if (sleep_mode)
+ temp &= ~(KL3_VIA_CLK16_ENABLE | KL3_TIMER_CLK18_ENABLE);
+ MACIO_OUT32(KEYLARGO_FCR3, temp);
+
+ /* Flush posted writes & wait a bit */
+ (void)MACIO_IN32(KEYLARGO_FCR0); mdelay(1);
+}
+
+static void intrepid_shutdown(struct macio_chip *macio, int sleep_mode)
+{
+ u32 temp;
+
+ MACIO_BIC(KEYLARGO_FCR0,KL0_SCCA_ENABLE | KL0_SCCB_ENABLE |
+ KL0_SCC_CELL_ENABLE);
+
+ MACIO_BIC(KEYLARGO_FCR1,
+ KL1_I2S0_CELL_ENABLE | KL1_I2S0_CLK_ENABLE_BIT |
+ KL1_I2S0_ENABLE | KL1_I2S1_CELL_ENABLE |
+ KL1_I2S1_CLK_ENABLE_BIT | KL1_I2S1_ENABLE |
+ KL1_EIDE0_ENABLE);
+ if (pmac_mb.board_flags & PMAC_MB_MOBILE)
+ MACIO_BIC(KEYLARGO_FCR1, KL1_UIDE_RESET_N);
+
+ temp = MACIO_IN32(KEYLARGO_FCR3);
+ temp &= ~(KL3_CLK49_ENABLE | KL3_CLK45_ENABLE |
+ KL3_I2S1_CLK18_ENABLE | KL3_I2S0_CLK18_ENABLE);
+ if (sleep_mode)
+ temp &= ~(KL3_TIMER_CLK18_ENABLE | KL3_IT_VIA_CLK32_ENABLE);
+ MACIO_OUT32(KEYLARGO_FCR3, temp);
+
+ /* Flush posted writes & wait a bit */
+ (void)MACIO_IN32(KEYLARGO_FCR0);
+ mdelay(10);
+}
+
+
+static int
+core99_sleep(void)
+{
+ struct macio_chip *macio;
+ int i;
+
+ macio = &macio_chips[0];
+ if (macio->type != macio_keylargo && macio->type != macio_pangea &&
+ macio->type != macio_intrepid)
+ return -ENODEV;
+
+ /* We power off the wireless slot in case it was not done
+ * by the driver. We don't power it on automatically however
+ */
+ if (macio->flags & MACIO_FLAG_AIRPORT_ON)
+ core99_airport_enable(macio->of_node, 0, 0);
+
+ /* We power off the FW cable. Should be done by the driver... */
+ if (macio->flags & MACIO_FLAG_FW_SUPPORTED) {
+ core99_firewire_enable(NULL, 0, 0);
+ core99_firewire_cable_power(NULL, 0, 0);
+ }
+
+ /* We make sure int. modem is off (in case driver lost it) */
+ if (macio->type == macio_keylargo)
+ core99_modem_enable(macio->of_node, 0, 0);
+ else
+ pangea_modem_enable(macio->of_node, 0, 0);
+
+ /* We make sure the sound is off as well */
+ core99_sound_chip_enable(macio->of_node, 0, 0);
+
+ /*
+ * Save various bits of KeyLargo
+ */
+
+ /* Save the state of the various GPIOs */
+ save_gpio_levels[0] = MACIO_IN32(KEYLARGO_GPIO_LEVELS0);
+ save_gpio_levels[1] = MACIO_IN32(KEYLARGO_GPIO_LEVELS1);
+ for (i=0; i<KEYLARGO_GPIO_EXTINT_CNT; i++)
+ save_gpio_extint[i] = MACIO_IN8(KEYLARGO_GPIO_EXTINT_0+i);
+ for (i=0; i<KEYLARGO_GPIO_CNT; i++)
+ save_gpio_normal[i] = MACIO_IN8(KEYLARGO_GPIO_0+i);
+
+ /* Save the FCRs */
+ if (macio->type == macio_keylargo)
+ save_mbcr = MACIO_IN32(KEYLARGO_MBCR);
+ save_fcr[0] = MACIO_IN32(KEYLARGO_FCR0);
+ save_fcr[1] = MACIO_IN32(KEYLARGO_FCR1);
+ save_fcr[2] = MACIO_IN32(KEYLARGO_FCR2);
+ save_fcr[3] = MACIO_IN32(KEYLARGO_FCR3);
+ save_fcr[4] = MACIO_IN32(KEYLARGO_FCR4);
+ if (macio->type == macio_pangea || macio->type == macio_intrepid)
+ save_fcr[5] = MACIO_IN32(KEYLARGO_FCR5);
+
+ /* Save state & config of DBDMA channels */
+ dbdma_save(macio, save_dbdma);
+
+ /*
+ * Turn off as much as we can
+ */
+ if (macio->type == macio_pangea)
+ pangea_shutdown(macio, 1);
+ else if (macio->type == macio_intrepid)
+ intrepid_shutdown(macio, 1);
+ else if (macio->type == macio_keylargo)
+ keylargo_shutdown(macio, 1);
+
+ /*
+ * Put the host bridge to sleep
+ */
+
+ save_unin_clock_ctl = UN_IN(UNI_N_CLOCK_CNTL);
+ /* Note: do not switch GMAC off, driver does it when necessary, WOL must keep it
+ * enabled !
+ */
+ UN_OUT(UNI_N_CLOCK_CNTL, save_unin_clock_ctl &
+ ~(/*UNI_N_CLOCK_CNTL_GMAC|*/UNI_N_CLOCK_CNTL_FW/*|UNI_N_CLOCK_CNTL_PCI*/));
+ udelay(100);
+ UN_OUT(UNI_N_HWINIT_STATE, UNI_N_HWINIT_STATE_SLEEPING);
+ UN_OUT(UNI_N_POWER_MGT, UNI_N_POWER_MGT_SLEEP);
+ mdelay(10);
+
+ /*
+ * FIXME: A bit of black magic with OpenPIC (don't ask me why)
+ */
+ if (pmac_mb.model_id == PMAC_TYPE_SAWTOOTH) {
+ MACIO_BIS(0x506e0, 0x00400000);
+ MACIO_BIS(0x506e0, 0x80000000);
+ }
+ return 0;
+}
+
+static int
+core99_wake_up(void)
+{
+ struct macio_chip *macio;
+ int i;
+
+ macio = &macio_chips[0];
+ if (macio->type != macio_keylargo && macio->type != macio_pangea &&
+ macio->type != macio_intrepid)
+ return -ENODEV;
+
+ /*
+ * Wakeup the host bridge
+ */
+ UN_OUT(UNI_N_POWER_MGT, UNI_N_POWER_MGT_NORMAL);
+ udelay(10);
+ UN_OUT(UNI_N_HWINIT_STATE, UNI_N_HWINIT_STATE_RUNNING);
+ udelay(10);
+
+ /*
+ * Restore KeyLargo
+ */
+
+ if (macio->type == macio_keylargo) {
+ MACIO_OUT32(KEYLARGO_MBCR, save_mbcr);
+ (void)MACIO_IN32(KEYLARGO_MBCR); udelay(10);
+ }
+ MACIO_OUT32(KEYLARGO_FCR0, save_fcr[0]);
+ (void)MACIO_IN32(KEYLARGO_FCR0); udelay(10);
+ MACIO_OUT32(KEYLARGO_FCR1, save_fcr[1]);
+ (void)MACIO_IN32(KEYLARGO_FCR1); udelay(10);
+ MACIO_OUT32(KEYLARGO_FCR2, save_fcr[2]);
+ (void)MACIO_IN32(KEYLARGO_FCR2); udelay(10);
+ MACIO_OUT32(KEYLARGO_FCR3, save_fcr[3]);
+ (void)MACIO_IN32(KEYLARGO_FCR3); udelay(10);
+ MACIO_OUT32(KEYLARGO_FCR4, save_fcr[4]);
+ (void)MACIO_IN32(KEYLARGO_FCR4); udelay(10);
+ if (macio->type == macio_pangea || macio->type == macio_intrepid) {
+ MACIO_OUT32(KEYLARGO_FCR5, save_fcr[5]);
+ (void)MACIO_IN32(KEYLARGO_FCR5); udelay(10);
+ }
+
+ dbdma_restore(macio, save_dbdma);
+
+ MACIO_OUT32(KEYLARGO_GPIO_LEVELS0, save_gpio_levels[0]);
+ MACIO_OUT32(KEYLARGO_GPIO_LEVELS1, save_gpio_levels[1]);
+ for (i=0; i<KEYLARGO_GPIO_EXTINT_CNT; i++)
+ MACIO_OUT8(KEYLARGO_GPIO_EXTINT_0+i, save_gpio_extint[i]);
+ for (i=0; i<KEYLARGO_GPIO_CNT; i++)
+ MACIO_OUT8(KEYLARGO_GPIO_0+i, save_gpio_normal[i]);
+
+ /* FIXME more black magic with OpenPIC ... */
+ if (pmac_mb.model_id == PMAC_TYPE_SAWTOOTH) {
+ MACIO_BIC(0x506e0, 0x00400000);
+ MACIO_BIC(0x506e0, 0x80000000);
+ }
+
+ UN_OUT(UNI_N_CLOCK_CNTL, save_unin_clock_ctl);
+ udelay(100);
+
+ return 0;
+}
+
+#endif /* CONFIG_PM */
+
+static long
+core99_sleep_state(struct device_node *node, long param, long value)
+{
+ /* Param == 1 means to enter the "fake sleep" mode that is
+ * used for CPU speed switch
+ */
+ if (param == 1) {
+ if (value == 1) {
+ UN_OUT(UNI_N_HWINIT_STATE, UNI_N_HWINIT_STATE_SLEEPING);
+ UN_OUT(UNI_N_POWER_MGT, UNI_N_POWER_MGT_IDLE2);
+ } else {
+ UN_OUT(UNI_N_POWER_MGT, UNI_N_POWER_MGT_NORMAL);
+ udelay(10);
+ UN_OUT(UNI_N_HWINIT_STATE, UNI_N_HWINIT_STATE_RUNNING);
+ udelay(10);
+ }
+ return 0;
+ }
+ if ((pmac_mb.board_flags & PMAC_MB_CAN_SLEEP) == 0)
+ return -EPERM;
+
+#ifdef CONFIG_PM
+ if (value == 1)
+ return core99_sleep();
+ else if (value == 0)
+ return core99_wake_up();
+
+#endif /* CONFIG_PM */
+ return 0;
+}
+
+#endif /* CONFIG_PPC64 */
+
+static long
+generic_dev_can_wake(struct device_node *node, long param, long value)
+{
+ /* Todo: eventually check we are really dealing with on-board
+ * video device ...
+ */
+
+ if (pmac_mb.board_flags & PMAC_MB_MAY_SLEEP)
+ pmac_mb.board_flags |= PMAC_MB_CAN_SLEEP;
+ return 0;
+}
+
+static long generic_get_mb_info(struct device_node *node, long param, long value)
+{
+ switch(param) {
+ case PMAC_MB_INFO_MODEL:
+ return pmac_mb.model_id;
+ case PMAC_MB_INFO_FLAGS:
+ return pmac_mb.board_flags;
+ case PMAC_MB_INFO_NAME:
+ /* hack hack hack... but should work */
+ *((const char **)value) = pmac_mb.model_name;
+ return 0;
+ }
+ return -EINVAL;
+}
+
+
+/*
+ * Table definitions
+ */
+
+/* Used on any machine
+ */
+static struct feature_table_entry any_features[] = {
+ { PMAC_FTR_GET_MB_INFO, generic_get_mb_info },
+ { PMAC_FTR_DEVICE_CAN_WAKE, generic_dev_can_wake },
+ { 0, NULL }
+};
+
+#ifndef CONFIG_PPC64
+
+/* OHare based motherboards. Currently, we only use these on the
+ * 2400,3400 and 3500 series powerbooks. Some older desktops seem
+ * to have issues with turning on/off those asic cells
+ */
+static struct feature_table_entry ohare_features[] = {
+ { PMAC_FTR_SCC_ENABLE, ohare_htw_scc_enable },
+ { PMAC_FTR_SWIM3_ENABLE, ohare_floppy_enable },
+ { PMAC_FTR_MESH_ENABLE, ohare_mesh_enable },
+ { PMAC_FTR_IDE_ENABLE, ohare_ide_enable},
+ { PMAC_FTR_IDE_RESET, ohare_ide_reset},
+ { PMAC_FTR_SLEEP_STATE, ohare_sleep_state },
+ { 0, NULL }
+};
+
+/* Heathrow desktop machines (Beige G3).
+ * Separated as some features couldn't be properly tested
+ * and the serial port control bits appear to confuse it.
+ */
+static struct feature_table_entry heathrow_desktop_features[] = {
+ { PMAC_FTR_SWIM3_ENABLE, heathrow_floppy_enable },
+ { PMAC_FTR_MESH_ENABLE, heathrow_mesh_enable },
+ { PMAC_FTR_IDE_ENABLE, heathrow_ide_enable },
+ { PMAC_FTR_IDE_RESET, heathrow_ide_reset },
+ { PMAC_FTR_BMAC_ENABLE, heathrow_bmac_enable },
+ { 0, NULL }
+};
+
+/* Heathrow based laptop, that is the Wallstreet and mainstreet
+ * powerbooks.
+ */
+static struct feature_table_entry heathrow_laptop_features[] = {
+ { PMAC_FTR_SCC_ENABLE, ohare_htw_scc_enable },
+ { PMAC_FTR_MODEM_ENABLE, heathrow_modem_enable },
+ { PMAC_FTR_SWIM3_ENABLE, heathrow_floppy_enable },
+ { PMAC_FTR_MESH_ENABLE, heathrow_mesh_enable },
+ { PMAC_FTR_IDE_ENABLE, heathrow_ide_enable },
+ { PMAC_FTR_IDE_RESET, heathrow_ide_reset },
+ { PMAC_FTR_BMAC_ENABLE, heathrow_bmac_enable },
+ { PMAC_FTR_SOUND_CHIP_ENABLE, heathrow_sound_enable },
+ { PMAC_FTR_SLEEP_STATE, heathrow_sleep_state },
+ { 0, NULL }
+};
+
+/* Paddington based machines
+ * The lombard (101) powerbook, first iMac models, B&W G3 and Yikes G4.
+ */
+static struct feature_table_entry paddington_features[] = {
+ { PMAC_FTR_SCC_ENABLE, ohare_htw_scc_enable },
+ { PMAC_FTR_MODEM_ENABLE, heathrow_modem_enable },
+ { PMAC_FTR_SWIM3_ENABLE, heathrow_floppy_enable },
+ { PMAC_FTR_MESH_ENABLE, heathrow_mesh_enable },
+ { PMAC_FTR_IDE_ENABLE, heathrow_ide_enable },
+ { PMAC_FTR_IDE_RESET, heathrow_ide_reset },
+ { PMAC_FTR_BMAC_ENABLE, heathrow_bmac_enable },
+ { PMAC_FTR_SOUND_CHIP_ENABLE, heathrow_sound_enable },
+ { PMAC_FTR_SLEEP_STATE, heathrow_sleep_state },
+ { 0, NULL }
+};
+
+/* Core99 & MacRISC 2 machines (all machines released since the
+ * iBook (included), that is all AGP machines, except pangea
+ * chipset. The pangea chipset is the "combo" UniNorth/KeyLargo
+ * used on iBook2 & iMac "flow power".
+ */
+static struct feature_table_entry core99_features[] = {
+ { PMAC_FTR_SCC_ENABLE, core99_scc_enable },
+ { PMAC_FTR_MODEM_ENABLE, core99_modem_enable },
+ { PMAC_FTR_IDE_ENABLE, core99_ide_enable },
+ { PMAC_FTR_IDE_RESET, core99_ide_reset },
+ { PMAC_FTR_GMAC_ENABLE, core99_gmac_enable },
+ { PMAC_FTR_GMAC_PHY_RESET, core99_gmac_phy_reset },
+ { PMAC_FTR_SOUND_CHIP_ENABLE, core99_sound_chip_enable },
+ { PMAC_FTR_AIRPORT_ENABLE, core99_airport_enable },
+ { PMAC_FTR_USB_ENABLE, core99_usb_enable },
+ { PMAC_FTR_1394_ENABLE, core99_firewire_enable },
+ { PMAC_FTR_1394_CABLE_POWER, core99_firewire_cable_power },
+#ifdef CONFIG_PM
+ { PMAC_FTR_SLEEP_STATE, core99_sleep_state },
+#endif
+#ifdef CONFIG_SMP
+ { PMAC_FTR_RESET_CPU, core99_reset_cpu },
+#endif /* CONFIG_SMP */
+ { PMAC_FTR_READ_GPIO, core99_read_gpio },
+ { PMAC_FTR_WRITE_GPIO, core99_write_gpio },
+ { 0, NULL }
+};
+
+/* RackMac
+ */
+static struct feature_table_entry rackmac_features[] = {
+ { PMAC_FTR_SCC_ENABLE, core99_scc_enable },
+ { PMAC_FTR_IDE_ENABLE, core99_ide_enable },
+ { PMAC_FTR_IDE_RESET, core99_ide_reset },
+ { PMAC_FTR_GMAC_ENABLE, core99_gmac_enable },
+ { PMAC_FTR_GMAC_PHY_RESET, core99_gmac_phy_reset },
+ { PMAC_FTR_USB_ENABLE, core99_usb_enable },
+ { PMAC_FTR_1394_ENABLE, core99_firewire_enable },
+ { PMAC_FTR_1394_CABLE_POWER, core99_firewire_cable_power },
+ { PMAC_FTR_SLEEP_STATE, core99_sleep_state },
+#ifdef CONFIG_SMP
+ { PMAC_FTR_RESET_CPU, core99_reset_cpu },
+#endif /* CONFIG_SMP */
+ { PMAC_FTR_READ_GPIO, core99_read_gpio },
+ { PMAC_FTR_WRITE_GPIO, core99_write_gpio },
+ { 0, NULL }
+};
+
+/* Pangea features
+ */
+static struct feature_table_entry pangea_features[] = {
+ { PMAC_FTR_SCC_ENABLE, core99_scc_enable },
+ { PMAC_FTR_MODEM_ENABLE, pangea_modem_enable },
+ { PMAC_FTR_IDE_ENABLE, core99_ide_enable },
+ { PMAC_FTR_IDE_RESET, core99_ide_reset },
+ { PMAC_FTR_GMAC_ENABLE, core99_gmac_enable },
+ { PMAC_FTR_GMAC_PHY_RESET, core99_gmac_phy_reset },
+ { PMAC_FTR_SOUND_CHIP_ENABLE, core99_sound_chip_enable },
+ { PMAC_FTR_AIRPORT_ENABLE, core99_airport_enable },
+ { PMAC_FTR_USB_ENABLE, core99_usb_enable },
+ { PMAC_FTR_1394_ENABLE, core99_firewire_enable },
+ { PMAC_FTR_1394_CABLE_POWER, core99_firewire_cable_power },
+ { PMAC_FTR_SLEEP_STATE, core99_sleep_state },
+ { PMAC_FTR_READ_GPIO, core99_read_gpio },
+ { PMAC_FTR_WRITE_GPIO, core99_write_gpio },
+ { 0, NULL }
+};
+
+/* Intrepid features
+ */
+static struct feature_table_entry intrepid_features[] = {
+ { PMAC_FTR_SCC_ENABLE, core99_scc_enable },
+ { PMAC_FTR_MODEM_ENABLE, pangea_modem_enable },
+ { PMAC_FTR_IDE_ENABLE, core99_ide_enable },
+ { PMAC_FTR_IDE_RESET, core99_ide_reset },
+ { PMAC_FTR_GMAC_ENABLE, core99_gmac_enable },
+ { PMAC_FTR_GMAC_PHY_RESET, core99_gmac_phy_reset },
+ { PMAC_FTR_SOUND_CHIP_ENABLE, core99_sound_chip_enable },
+ { PMAC_FTR_AIRPORT_ENABLE, core99_airport_enable },
+ { PMAC_FTR_USB_ENABLE, core99_usb_enable },
+ { PMAC_FTR_1394_ENABLE, core99_firewire_enable },
+ { PMAC_FTR_1394_CABLE_POWER, core99_firewire_cable_power },
+ { PMAC_FTR_SLEEP_STATE, core99_sleep_state },
+ { PMAC_FTR_READ_GPIO, core99_read_gpio },
+ { PMAC_FTR_WRITE_GPIO, core99_write_gpio },
+ { PMAC_FTR_AACK_DELAY_ENABLE, intrepid_aack_delay_enable },
+ { 0, NULL }
+};
+
+#else /* CONFIG_PPC64 */
+
+/* G5 features
+ */
+static struct feature_table_entry g5_features[] = {
+ { PMAC_FTR_GMAC_ENABLE, g5_gmac_enable },
+ { PMAC_FTR_1394_ENABLE, g5_fw_enable },
+ { PMAC_FTR_ENABLE_MPIC, g5_mpic_enable },
+ { PMAC_FTR_GMAC_PHY_RESET, g5_eth_phy_reset },
+ { PMAC_FTR_SOUND_CHIP_ENABLE, g5_i2s_enable },
+#ifdef CONFIG_SMP
+ { PMAC_FTR_RESET_CPU, g5_reset_cpu },
+#endif /* CONFIG_SMP */
+ { PMAC_FTR_READ_GPIO, core99_read_gpio },
+ { PMAC_FTR_WRITE_GPIO, core99_write_gpio },
+ { 0, NULL }
+};
+
+#endif /* CONFIG_PPC64 */
+
+static struct pmac_mb_def pmac_mb_defs[] = {
+#ifndef CONFIG_PPC64
+ /*
+ * Desktops
+ */
+
+ { "AAPL,8500", "PowerMac 8500/8600",
+ PMAC_TYPE_PSURGE, NULL,
+ 0
+ },
+ { "AAPL,9500", "PowerMac 9500/9600",
+ PMAC_TYPE_PSURGE, NULL,
+ 0
+ },
+ { "AAPL,7200", "PowerMac 7200",
+ PMAC_TYPE_PSURGE, NULL,
+ 0
+ },
+ { "AAPL,7300", "PowerMac 7200/7300",
+ PMAC_TYPE_PSURGE, NULL,
+ 0
+ },
+ { "AAPL,7500", "PowerMac 7500",
+ PMAC_TYPE_PSURGE, NULL,
+ 0
+ },
+ { "AAPL,ShinerESB", "Apple Network Server",
+ PMAC_TYPE_ANS, NULL,
+ 0
+ },
+ { "AAPL,e407", "Alchemy",
+ PMAC_TYPE_ALCHEMY, NULL,
+ 0
+ },
+ { "AAPL,e411", "Gazelle",
+ PMAC_TYPE_GAZELLE, NULL,
+ 0
+ },
+ { "AAPL,Gossamer", "PowerMac G3 (Gossamer)",
+ PMAC_TYPE_GOSSAMER, heathrow_desktop_features,
+ 0
+ },
+ { "AAPL,PowerMac G3", "PowerMac G3 (Silk)",
+ PMAC_TYPE_SILK, heathrow_desktop_features,
+ 0
+ },
+ { "PowerMac1,1", "Blue&White G3",
+ PMAC_TYPE_YOSEMITE, paddington_features,
+ 0
+ },
+ { "PowerMac1,2", "PowerMac G4 PCI Graphics",
+ PMAC_TYPE_YIKES, paddington_features,
+ 0
+ },
+ { "PowerMac2,1", "iMac FireWire",
+ PMAC_TYPE_FW_IMAC, core99_features,
+ PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99
+ },
+ { "PowerMac2,2", "iMac FireWire",
+ PMAC_TYPE_FW_IMAC, core99_features,
+ PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99
+ },
+ { "PowerMac3,1", "PowerMac G4 AGP Graphics",
+ PMAC_TYPE_SAWTOOTH, core99_features,
+ PMAC_MB_OLD_CORE99
+ },
+ { "PowerMac3,2", "PowerMac G4 AGP Graphics",
+ PMAC_TYPE_SAWTOOTH, core99_features,
+ PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99
+ },
+ { "PowerMac3,3", "PowerMac G4 AGP Graphics",
+ PMAC_TYPE_SAWTOOTH, core99_features,
+ PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99
+ },
+ { "PowerMac3,4", "PowerMac G4 Silver",
+ PMAC_TYPE_QUICKSILVER, core99_features,
+ PMAC_MB_MAY_SLEEP
+ },
+ { "PowerMac3,5", "PowerMac G4 Silver",
+ PMAC_TYPE_QUICKSILVER, core99_features,
+ PMAC_MB_MAY_SLEEP
+ },
+ { "PowerMac3,6", "PowerMac G4 Windtunnel",
+ PMAC_TYPE_WINDTUNNEL, core99_features,
+ PMAC_MB_MAY_SLEEP,
+ },
+ { "PowerMac4,1", "iMac \"Flower Power\"",
+ PMAC_TYPE_PANGEA_IMAC, pangea_features,
+ PMAC_MB_MAY_SLEEP
+ },
+ { "PowerMac4,2", "Flat panel iMac",
+ PMAC_TYPE_FLAT_PANEL_IMAC, pangea_features,
+ PMAC_MB_CAN_SLEEP
+ },
+ { "PowerMac4,4", "eMac",
+ PMAC_TYPE_EMAC, core99_features,
+ PMAC_MB_MAY_SLEEP
+ },
+ { "PowerMac5,1", "PowerMac G4 Cube",
+ PMAC_TYPE_CUBE, core99_features,
+ PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99
+ },
+ { "PowerMac6,1", "Flat panel iMac",
+ PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
+ PMAC_MB_MAY_SLEEP,
+ },
+ { "PowerMac6,3", "Flat panel iMac",
+ PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
+ PMAC_MB_MAY_SLEEP,
+ },
+ { "PowerMac6,4", "eMac",
+ PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
+ PMAC_MB_MAY_SLEEP,
+ },
+ { "PowerMac10,1", "Mac mini",
+ PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
+ PMAC_MB_MAY_SLEEP,
+ },
+ { "PowerMac10,2", "Mac mini (Late 2005)",
+ PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
+ PMAC_MB_MAY_SLEEP,
+ },
+ { "iMac,1", "iMac (first generation)",
+ PMAC_TYPE_ORIG_IMAC, paddington_features,
+ 0
+ },
+
+ /*
+ * Xserve's
+ */
+
+ { "RackMac1,1", "XServe",
+ PMAC_TYPE_RACKMAC, rackmac_features,
+ 0,
+ },
+ { "RackMac1,2", "XServe rev. 2",
+ PMAC_TYPE_RACKMAC, rackmac_features,
+ 0,
+ },
+
+ /*
+ * Laptops
+ */
+
+ { "AAPL,3400/2400", "PowerBook 3400",
+ PMAC_TYPE_HOOPER, ohare_features,
+ PMAC_MB_CAN_SLEEP | PMAC_MB_MOBILE
+ },
+ { "AAPL,3500", "PowerBook 3500",
+ PMAC_TYPE_KANGA, ohare_features,
+ PMAC_MB_CAN_SLEEP | PMAC_MB_MOBILE
+ },
+ { "AAPL,PowerBook1998", "PowerBook Wallstreet",
+ PMAC_TYPE_WALLSTREET, heathrow_laptop_features,
+ PMAC_MB_CAN_SLEEP | PMAC_MB_MOBILE
+ },
+ { "PowerBook1,1", "PowerBook 101 (Lombard)",
+ PMAC_TYPE_101_PBOOK, paddington_features,
+ PMAC_MB_CAN_SLEEP | PMAC_MB_MOBILE
+ },
+ { "PowerBook2,1", "iBook (first generation)",
+ PMAC_TYPE_ORIG_IBOOK, core99_features,
+ PMAC_MB_CAN_SLEEP | PMAC_MB_OLD_CORE99 | PMAC_MB_MOBILE
+ },
+ { "PowerBook2,2", "iBook FireWire",
+ PMAC_TYPE_FW_IBOOK, core99_features,
+ PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER |
+ PMAC_MB_OLD_CORE99 | PMAC_MB_MOBILE
+ },
+ { "PowerBook3,1", "PowerBook Pismo",
+ PMAC_TYPE_PISMO, core99_features,
+ PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER |
+ PMAC_MB_OLD_CORE99 | PMAC_MB_MOBILE
+ },
+ { "PowerBook3,2", "PowerBook Titanium",
+ PMAC_TYPE_TITANIUM, core99_features,
+ PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE
+ },
+ { "PowerBook3,3", "PowerBook Titanium II",
+ PMAC_TYPE_TITANIUM2, core99_features,
+ PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE
+ },
+ { "PowerBook3,4", "PowerBook Titanium III",
+ PMAC_TYPE_TITANIUM3, core99_features,
+ PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE
+ },
+ { "PowerBook3,5", "PowerBook Titanium IV",
+ PMAC_TYPE_TITANIUM4, core99_features,
+ PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE
+ },
+ { "PowerBook4,1", "iBook 2",
+ PMAC_TYPE_IBOOK2, pangea_features,
+ PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE
+ },
+ { "PowerBook4,2", "iBook 2",
+ PMAC_TYPE_IBOOK2, pangea_features,
+ PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE
+ },
+ { "PowerBook4,3", "iBook 2 rev. 2",
+ PMAC_TYPE_IBOOK2, pangea_features,
+ PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE
+ },
+ { "PowerBook5,1", "PowerBook G4 17\"",
+ PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
+ PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
+ },
+ { "PowerBook5,2", "PowerBook G4 15\"",
+ PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
+ PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
+ },
+ { "PowerBook5,3", "PowerBook G4 17\"",
+ PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
+ PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
+ },
+ { "PowerBook5,4", "PowerBook G4 15\"",
+ PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
+ PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
+ },
+ { "PowerBook5,5", "PowerBook G4 17\"",
+ PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
+ PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
+ },
+ { "PowerBook5,6", "PowerBook G4 15\"",
+ PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
+ PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
+ },
+ { "PowerBook5,7", "PowerBook G4 17\"",
+ PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
+ PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
+ },
+ { "PowerBook5,8", "PowerBook G4 15\"",
+ PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
+ PMAC_MB_MAY_SLEEP | PMAC_MB_MOBILE,
+ },
+ { "PowerBook5,9", "PowerBook G4 17\"",
+ PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
+ PMAC_MB_MAY_SLEEP | PMAC_MB_MOBILE,
+ },
+ { "PowerBook6,1", "PowerBook G4 12\"",
+ PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
+ PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
+ },
+ { "PowerBook6,2", "PowerBook G4",
+ PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
+ PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
+ },
+ { "PowerBook6,3", "iBook G4",
+ PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
+ PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
+ },
+ { "PowerBook6,4", "PowerBook G4 12\"",
+ PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
+ PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
+ },
+ { "PowerBook6,5", "iBook G4",
+ PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
+ PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
+ },
+ { "PowerBook6,7", "iBook G4",
+ PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
+ PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
+ },
+ { "PowerBook6,8", "PowerBook G4 12\"",
+ PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
+ PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
+ },
+#else /* CONFIG_PPC64 */
+ { "PowerMac7,2", "PowerMac G5",
+ PMAC_TYPE_POWERMAC_G5, g5_features,
+ 0,
+ },
+#ifdef CONFIG_PPC64
+ { "PowerMac7,3", "PowerMac G5",
+ PMAC_TYPE_POWERMAC_G5, g5_features,
+ 0,
+ },
+ { "PowerMac8,1", "iMac G5",
+ PMAC_TYPE_IMAC_G5, g5_features,
+ 0,
+ },
+ { "PowerMac9,1", "PowerMac G5",
+ PMAC_TYPE_POWERMAC_G5_U3L, g5_features,
+ 0,
+ },
+ { "PowerMac11,2", "PowerMac G5 Dual Core",
+ PMAC_TYPE_POWERMAC_G5_U3L, g5_features,
+ 0,
+ },
+ { "PowerMac12,1", "iMac G5 (iSight)",
+ PMAC_TYPE_POWERMAC_G5_U3L, g5_features,
+ 0,
+ },
+ { "RackMac3,1", "XServe G5",
+ PMAC_TYPE_XSERVE_G5, g5_features,
+ 0,
+ },
+#endif /* CONFIG_PPC64 */
+#endif /* CONFIG_PPC64 */
+};
+
+/*
+ * The toplevel feature_call callback
+ */
+long pmac_do_feature_call(unsigned int selector, ...)
+{
+ struct device_node *node;
+ long param, value;
+ int i;
+ feature_call func = NULL;
+ va_list args;
+
+ if (pmac_mb.features)
+ for (i=0; pmac_mb.features[i].function; i++)
+ if (pmac_mb.features[i].selector == selector) {
+ func = pmac_mb.features[i].function;
+ break;
+ }
+ if (!func)
+ for (i=0; any_features[i].function; i++)
+ if (any_features[i].selector == selector) {
+ func = any_features[i].function;
+ break;
+ }
+ if (!func)
+ return -ENODEV;
+
+ va_start(args, selector);
+ node = (struct device_node*)va_arg(args, void*);
+ param = va_arg(args, long);
+ value = va_arg(args, long);
+ va_end(args);
+
+ return func(node, param, value);
+}
+
+static int __init probe_motherboard(void)
+{
+ int i;
+ struct macio_chip *macio = &macio_chips[0];
+ const char *model = NULL;
+ struct device_node *dt;
+ int ret = 0;
+
+ /* Lookup known motherboard type in device-tree. First try an
+ * exact match on the "model" property, then try a "compatible"
+ * match is none is found.
+ */
+ dt = of_find_node_by_name(NULL, "device-tree");
+ if (dt != NULL)
+ model = of_get_property(dt, "model", NULL);
+ for(i=0; model && i<ARRAY_SIZE(pmac_mb_defs); i++) {
+ if (strcmp(model, pmac_mb_defs[i].model_string) == 0) {
+ pmac_mb = pmac_mb_defs[i];
+ goto found;
+ }
+ }
+ for(i=0; i<ARRAY_SIZE(pmac_mb_defs); i++) {
+ if (of_machine_is_compatible(pmac_mb_defs[i].model_string)) {
+ pmac_mb = pmac_mb_defs[i];
+ goto found;
+ }
+ }
+
+ /* Fallback to selection depending on mac-io chip type */
+ switch(macio->type) {
+#ifndef CONFIG_PPC64
+ case macio_grand_central:
+ pmac_mb.model_id = PMAC_TYPE_PSURGE;
+ pmac_mb.model_name = "Unknown PowerSurge";
+ break;
+ case macio_ohare:
+ pmac_mb.model_id = PMAC_TYPE_UNKNOWN_OHARE;
+ pmac_mb.model_name = "Unknown OHare-based";
+ break;
+ case macio_heathrow:
+ pmac_mb.model_id = PMAC_TYPE_UNKNOWN_HEATHROW;
+ pmac_mb.model_name = "Unknown Heathrow-based";
+ pmac_mb.features = heathrow_desktop_features;
+ break;
+ case macio_paddington:
+ pmac_mb.model_id = PMAC_TYPE_UNKNOWN_PADDINGTON;
+ pmac_mb.model_name = "Unknown Paddington-based";
+ pmac_mb.features = paddington_features;
+ break;
+ case macio_keylargo:
+ pmac_mb.model_id = PMAC_TYPE_UNKNOWN_CORE99;
+ pmac_mb.model_name = "Unknown Keylargo-based";
+ pmac_mb.features = core99_features;
+ break;
+ case macio_pangea:
+ pmac_mb.model_id = PMAC_TYPE_UNKNOWN_PANGEA;
+ pmac_mb.model_name = "Unknown Pangea-based";
+ pmac_mb.features = pangea_features;
+ break;
+ case macio_intrepid:
+ pmac_mb.model_id = PMAC_TYPE_UNKNOWN_INTREPID;
+ pmac_mb.model_name = "Unknown Intrepid-based";
+ pmac_mb.features = intrepid_features;
+ break;
+#else /* CONFIG_PPC64 */
+ case macio_keylargo2:
+ pmac_mb.model_id = PMAC_TYPE_UNKNOWN_K2;
+ pmac_mb.model_name = "Unknown K2-based";
+ pmac_mb.features = g5_features;
+ break;
+ case macio_shasta:
+ pmac_mb.model_id = PMAC_TYPE_UNKNOWN_SHASTA;
+ pmac_mb.model_name = "Unknown Shasta-based";
+ pmac_mb.features = g5_features;
+ break;
+#endif /* CONFIG_PPC64 */
+ default:
+ ret = -ENODEV;
+ goto done;
+ }
+found:
+#ifndef CONFIG_PPC64
+ /* Fixup Hooper vs. Comet */
+ if (pmac_mb.model_id == PMAC_TYPE_HOOPER) {
+ u32 __iomem * mach_id_ptr = ioremap(0xf3000034, 4);
+ if (!mach_id_ptr) {
+ ret = -ENODEV;
+ goto done;
+ }
+ /* Here, I used to disable the media-bay on comet. It
+ * appears this is wrong, the floppy connector is actually
+ * a kind of media-bay and works with the current driver.
+ */
+ if (__raw_readl(mach_id_ptr) & 0x20000000UL)
+ pmac_mb.model_id = PMAC_TYPE_COMET;
+ iounmap(mach_id_ptr);
+ }
+
+ /* Set default value of powersave_nap on machines that support it.
+ * It appears that uninorth rev 3 has a problem with it, we don't
+ * enable it on those. In theory, the flush-on-lock property is
+ * supposed to be set when not supported, but I'm not very confident
+ * that all Apple OF revs did it properly, I do it the paranoid way.
+ */
+ while (uninorth_base && uninorth_rev > 3) {
+ struct device_node *cpus = of_find_node_by_path("/cpus");
+ struct device_node *np;
+
+ if (!cpus || !cpus->child) {
+ printk(KERN_WARNING "Can't find CPU(s) in device tree !\n");
+ of_node_put(cpus);
+ break;
+ }
+ np = cpus->child;
+ /* Nap mode not supported on SMP */
+ if (np->sibling) {
+ of_node_put(cpus);
+ break;
+ }
+ /* Nap mode not supported if flush-on-lock property is present */
+ if (of_get_property(np, "flush-on-lock", NULL)) {
+ of_node_put(cpus);
+ break;
+ }
+ of_node_put(cpus);
+ powersave_nap = 1;
+ printk(KERN_DEBUG "Processor NAP mode on idle enabled.\n");
+ break;
+ }
+
+ /* On CPUs that support it (750FX), lowspeed by default during
+ * NAP mode
+ */
+ powersave_lowspeed = 1;
+
+#else /* CONFIG_PPC64 */
+ powersave_nap = 1;
+#endif /* CONFIG_PPC64 */
+
+ /* Check for "mobile" machine */
+ if (model && (strncmp(model, "PowerBook", 9) == 0
+ || strncmp(model, "iBook", 5) == 0))
+ pmac_mb.board_flags |= PMAC_MB_MOBILE;
+
+
+ printk(KERN_INFO "PowerMac motherboard: %s\n", pmac_mb.model_name);
+done:
+ of_node_put(dt);
+ return ret;
+}
+
+/* Initialize the Core99 UniNorth host bridge and memory controller
+ */
+static void __init probe_uninorth(void)
+{
+ const u32 *addrp;
+ phys_addr_t address;
+ unsigned long actrl;
+
+ /* Locate core99 Uni-N */
+ uninorth_node = of_find_node_by_name(NULL, "uni-n");
+ uninorth_maj = 1;
+
+ /* Locate G5 u3 */
+ if (uninorth_node == NULL) {
+ uninorth_node = of_find_node_by_name(NULL, "u3");
+ uninorth_maj = 3;
+ }
+ /* Locate G5 u4 */
+ if (uninorth_node == NULL) {
+ uninorth_node = of_find_node_by_name(NULL, "u4");
+ uninorth_maj = 4;
+ }
+ if (uninorth_node == NULL) {
+ uninorth_maj = 0;
+ return;
+ }
+
+ addrp = of_get_property(uninorth_node, "reg", NULL);
+ if (addrp == NULL)
+ return;
+ address = of_translate_address(uninorth_node, addrp);
+ if (address == 0)
+ return;
+ uninorth_base = ioremap(address, 0x40000);
+ if (uninorth_base == NULL)
+ return;
+ uninorth_rev = in_be32(UN_REG(UNI_N_VERSION));
+ if (uninorth_maj == 3 || uninorth_maj == 4) {
+ u3_ht_base = ioremap(address + U3_HT_CONFIG_BASE, 0x1000);
+ if (u3_ht_base == NULL) {
+ iounmap(uninorth_base);
+ return;
+ }
+ }
+
+ printk(KERN_INFO "Found %s memory controller & host bridge"
+ " @ 0x%08x revision: 0x%02x\n", uninorth_maj == 3 ? "U3" :
+ uninorth_maj == 4 ? "U4" : "UniNorth",
+ (unsigned int)address, uninorth_rev);
+ printk(KERN_INFO "Mapped at 0x%08lx\n", (unsigned long)uninorth_base);
+
+ /* Set the arbitrer QAck delay according to what Apple does
+ */
+ if (uninorth_rev < 0x11) {
+ actrl = UN_IN(UNI_N_ARB_CTRL) & ~UNI_N_ARB_CTRL_QACK_DELAY_MASK;
+ actrl |= ((uninorth_rev < 3) ? UNI_N_ARB_CTRL_QACK_DELAY105 :
+ UNI_N_ARB_CTRL_QACK_DELAY) <<
+ UNI_N_ARB_CTRL_QACK_DELAY_SHIFT;
+ UN_OUT(UNI_N_ARB_CTRL, actrl);
+ }
+
+ /* Some more magic as done by them in recent MacOS X on UniNorth
+ * revs 1.5 to 2.O and Pangea. Seem to toggle the UniN Maxbus/PCI
+ * memory timeout
+ */
+ if ((uninorth_rev >= 0x11 && uninorth_rev <= 0x24) ||
+ uninorth_rev == 0xc0)
+ UN_OUT(0x2160, UN_IN(0x2160) & 0x00ffffff);
+}
+
+static void __init probe_one_macio(const char *name, const char *compat, int type)
+{
+ struct device_node* node;
+ int i;
+ volatile u32 __iomem *base;
+ const u32 *addrp, *revp;
+ phys_addr_t addr;
+ u64 size;
+
+ for (node = NULL; (node = of_find_node_by_name(node, name)) != NULL;) {
+ if (!compat)
+ break;
+ if (of_device_is_compatible(node, compat))
+ break;
+ }
+ if (!node)
+ return;
+ for(i=0; i<MAX_MACIO_CHIPS; i++) {
+ if (!macio_chips[i].of_node)
+ break;
+ if (macio_chips[i].of_node == node)
+ return;
+ }
+
+ if (i >= MAX_MACIO_CHIPS) {
+ printk(KERN_ERR "pmac_feature: Please increase MAX_MACIO_CHIPS !\n");
+ printk(KERN_ERR "pmac_feature: %s skipped\n", node->full_name);
+ return;
+ }
+ addrp = of_get_pci_address(node, 0, &size, NULL);
+ if (addrp == NULL) {
+ printk(KERN_ERR "pmac_feature: %s: can't find base !\n",
+ node->full_name);
+ return;
+ }
+ addr = of_translate_address(node, addrp);
+ if (addr == 0) {
+ printk(KERN_ERR "pmac_feature: %s, can't translate base !\n",
+ node->full_name);
+ return;
+ }
+ base = ioremap(addr, (unsigned long)size);
+ if (!base) {
+ printk(KERN_ERR "pmac_feature: %s, can't map mac-io chip !\n",
+ node->full_name);
+ return;
+ }
+ if (type == macio_keylargo || type == macio_keylargo2) {
+ const u32 *did = of_get_property(node, "device-id", NULL);
+ if (*did == 0x00000025)
+ type = macio_pangea;
+ if (*did == 0x0000003e)
+ type = macio_intrepid;
+ if (*did == 0x0000004f)
+ type = macio_shasta;
+ }
+ macio_chips[i].of_node = node;
+ macio_chips[i].type = type;
+ macio_chips[i].base = base;
+ macio_chips[i].flags = MACIO_FLAG_SCCA_ON | MACIO_FLAG_SCCB_ON;
+ macio_chips[i].name = macio_names[type];
+ revp = of_get_property(node, "revision-id", NULL);
+ if (revp)
+ macio_chips[i].rev = *revp;
+ printk(KERN_INFO "Found a %s mac-io controller, rev: %d, mapped at 0x%p\n",
+ macio_names[type], macio_chips[i].rev, macio_chips[i].base);
+}
+
+static int __init
+probe_macios(void)
+{
+ /* Warning, ordering is important */
+ probe_one_macio("gc", NULL, macio_grand_central);
+ probe_one_macio("ohare", NULL, macio_ohare);
+ probe_one_macio("pci106b,7", NULL, macio_ohareII);
+ probe_one_macio("mac-io", "keylargo", macio_keylargo);
+ probe_one_macio("mac-io", "paddington", macio_paddington);
+ probe_one_macio("mac-io", "gatwick", macio_gatwick);
+ probe_one_macio("mac-io", "heathrow", macio_heathrow);
+ probe_one_macio("mac-io", "K2-Keylargo", macio_keylargo2);
+
+ /* Make sure the "main" macio chip appear first */
+ if (macio_chips[0].type == macio_gatwick
+ && macio_chips[1].type == macio_heathrow) {
+ struct macio_chip temp = macio_chips[0];
+ macio_chips[0] = macio_chips[1];
+ macio_chips[1] = temp;
+ }
+ if (macio_chips[0].type == macio_ohareII
+ && macio_chips[1].type == macio_ohare) {
+ struct macio_chip temp = macio_chips[0];
+ macio_chips[0] = macio_chips[1];
+ macio_chips[1] = temp;
+ }
+ macio_chips[0].lbus.index = 0;
+ macio_chips[1].lbus.index = 1;
+
+ return (macio_chips[0].of_node == NULL) ? -ENODEV : 0;
+}
+
+static void __init
+initial_serial_shutdown(struct device_node *np)
+{
+ int len;
+ const struct slot_names_prop {
+ int count;
+ char name[1];
+ } *slots;
+ const char *conn;
+ int port_type = PMAC_SCC_ASYNC;
+ int modem = 0;
+
+ slots = of_get_property(np, "slot-names", &len);
+ conn = of_get_property(np, "AAPL,connector", &len);
+ if (conn && (strcmp(conn, "infrared") == 0))
+ port_type = PMAC_SCC_IRDA;
+ else if (of_device_is_compatible(np, "cobalt"))
+ modem = 1;
+ else if (slots && slots->count > 0) {
+ if (strcmp(slots->name, "IrDA") == 0)
+ port_type = PMAC_SCC_IRDA;
+ else if (strcmp(slots->name, "Modem") == 0)
+ modem = 1;
+ }
+ if (modem)
+ pmac_call_feature(PMAC_FTR_MODEM_ENABLE, np, 0, 0);
+ pmac_call_feature(PMAC_FTR_SCC_ENABLE, np, port_type, 0);
+}
+
+static void __init
+set_initial_features(void)
+{
+ struct device_node *np;
+
+ /* That hack appears to be necessary for some StarMax motherboards
+ * but I'm not too sure it was audited for side-effects on other
+ * ohare based machines...
+ * Since I still have difficulties figuring the right way to
+ * differenciate them all and since that hack was there for a long
+ * time, I'll keep it around
+ */
+ if (macio_chips[0].type == macio_ohare) {
+ struct macio_chip *macio = &macio_chips[0];
+ np = of_find_node_by_name(NULL, "via-pmu");
+ if (np)
+ MACIO_BIS(OHARE_FCR, OH_IOBUS_ENABLE);
+ else
+ MACIO_OUT32(OHARE_FCR, STARMAX_FEATURES);
+ of_node_put(np);
+ } else if (macio_chips[1].type == macio_ohare) {
+ struct macio_chip *macio = &macio_chips[1];
+ MACIO_BIS(OHARE_FCR, OH_IOBUS_ENABLE);
+ }
+
+#ifdef CONFIG_PPC64
+ if (macio_chips[0].type == macio_keylargo2 ||
+ macio_chips[0].type == macio_shasta) {
+#ifndef CONFIG_SMP
+ /* On SMP machines running UP, we have the second CPU eating
+ * bus cycles. We need to take it off the bus. This is done
+ * from pmac_smp for SMP kernels running on one CPU
+ */
+ np = of_find_node_by_type(NULL, "cpu");
+ if (np != NULL)
+ np = of_find_node_by_type(np, "cpu");
+ if (np != NULL) {
+ g5_phy_disable_cpu1();
+ of_node_put(np);
+ }
+#endif /* CONFIG_SMP */
+ /* Enable GMAC for now for PCI probing. It will be disabled
+ * later on after PCI probe
+ */
+ for_each_node_by_name(np, "ethernet")
+ if (of_device_is_compatible(np, "K2-GMAC"))
+ g5_gmac_enable(np, 0, 1);
+
+ /* Enable FW before PCI probe. Will be disabled later on
+ * Note: We should have a batter way to check that we are
+ * dealing with uninorth internal cell and not a PCI cell
+ * on the external PCI. The code below works though.
+ */
+ for_each_node_by_name(np, "firewire") {
+ if (of_device_is_compatible(np, "pci106b,5811")) {
+ macio_chips[0].flags |= MACIO_FLAG_FW_SUPPORTED;
+ g5_fw_enable(np, 0, 1);
+ }
+ }
+ }
+#else /* CONFIG_PPC64 */
+
+ if (macio_chips[0].type == macio_keylargo ||
+ macio_chips[0].type == macio_pangea ||
+ macio_chips[0].type == macio_intrepid) {
+ /* Enable GMAC for now for PCI probing. It will be disabled
+ * later on after PCI probe
+ */
+ for_each_node_by_name(np, "ethernet") {
+ if (np->parent
+ && of_device_is_compatible(np->parent, "uni-north")
+ && of_device_is_compatible(np, "gmac"))
+ core99_gmac_enable(np, 0, 1);
+ }
+
+ /* Enable FW before PCI probe. Will be disabled later on
+ * Note: We should have a batter way to check that we are
+ * dealing with uninorth internal cell and not a PCI cell
+ * on the external PCI. The code below works though.
+ */
+ for_each_node_by_name(np, "firewire") {
+ if (np->parent
+ && of_device_is_compatible(np->parent, "uni-north")
+ && (of_device_is_compatible(np, "pci106b,18") ||
+ of_device_is_compatible(np, "pci106b,30") ||
+ of_device_is_compatible(np, "pci11c1,5811"))) {
+ macio_chips[0].flags |= MACIO_FLAG_FW_SUPPORTED;
+ core99_firewire_enable(np, 0, 1);
+ }
+ }
+
+ /* Enable ATA-100 before PCI probe. */
+ np = of_find_node_by_name(NULL, "ata-6");
+ for_each_node_by_name(np, "ata-6") {
+ if (np->parent
+ && of_device_is_compatible(np->parent, "uni-north")
+ && of_device_is_compatible(np, "kauai-ata")) {
+ core99_ata100_enable(np, 1);
+ }
+ }
+
+ /* Switch airport off */
+ for_each_node_by_name(np, "radio") {
+ if (np->parent == macio_chips[0].of_node) {
+ macio_chips[0].flags |= MACIO_FLAG_AIRPORT_ON;
+ core99_airport_enable(np, 0, 0);
+ }
+ }
+ }
+
+ /* On all machines that support sound PM, switch sound off */
+ if (macio_chips[0].of_node)
+ pmac_do_feature_call(PMAC_FTR_SOUND_CHIP_ENABLE,
+ macio_chips[0].of_node, 0, 0);
+
+ /* While on some desktop G3s, we turn it back on */
+ if (macio_chips[0].of_node && macio_chips[0].type == macio_heathrow
+ && (pmac_mb.model_id == PMAC_TYPE_GOSSAMER ||
+ pmac_mb.model_id == PMAC_TYPE_SILK)) {
+ struct macio_chip *macio = &macio_chips[0];
+ MACIO_BIS(HEATHROW_FCR, HRW_SOUND_CLK_ENABLE);
+ MACIO_BIC(HEATHROW_FCR, HRW_SOUND_POWER_N);
+ }
+
+#endif /* CONFIG_PPC64 */
+
+ /* On all machines, switch modem & serial ports off */
+ for_each_node_by_name(np, "ch-a")
+ initial_serial_shutdown(np);
+ of_node_put(np);
+ for_each_node_by_name(np, "ch-b")
+ initial_serial_shutdown(np);
+ of_node_put(np);
+}
+
+void __init
+pmac_feature_init(void)
+{
+ /* Detect the UniNorth memory controller */
+ probe_uninorth();
+
+ /* Probe mac-io controllers */
+ if (probe_macios()) {
+ printk(KERN_WARNING "No mac-io chip found\n");
+ return;
+ }
+
+ /* Probe machine type */
+ if (probe_motherboard())
+ printk(KERN_WARNING "Unknown PowerMac !\n");
+
+ /* Set some initial features (turn off some chips that will
+ * be later turned on)
+ */
+ set_initial_features();
+}
+
+#if 0
+static void dump_HT_speeds(char *name, u32 cfg, u32 frq)
+{
+ int freqs[16] = { 200,300,400,500,600,800,1000,0,0,0,0,0,0,0,0,0 };
+ int bits[8] = { 8,16,0,32,2,4,0,0 };
+ int freq = (frq >> 8) & 0xf;
+
+ if (freqs[freq] == 0)
+ printk("%s: Unknown HT link frequency %x\n", name, freq);
+ else
+ printk("%s: %d MHz on main link, (%d in / %d out) bits width\n",
+ name, freqs[freq],
+ bits[(cfg >> 28) & 0x7], bits[(cfg >> 24) & 0x7]);
+}
+
+void __init pmac_check_ht_link(void)
+{
+ u32 ufreq, freq, ucfg, cfg;
+ struct device_node *pcix_node;
+ u8 px_bus, px_devfn;
+ struct pci_controller *px_hose;
+
+ (void)in_be32(u3_ht_base + U3_HT_LINK_COMMAND);
+ ucfg = cfg = in_be32(u3_ht_base + U3_HT_LINK_CONFIG);
+ ufreq = freq = in_be32(u3_ht_base + U3_HT_LINK_FREQ);
+ dump_HT_speeds("U3 HyperTransport", cfg, freq);
+
+ pcix_node = of_find_compatible_node(NULL, "pci", "pci-x");
+ if (pcix_node == NULL) {
+ printk("No PCI-X bridge found\n");
+ return;
+ }
+ if (pci_device_from_OF_node(pcix_node, &px_bus, &px_devfn) != 0) {
+ printk("PCI-X bridge found but not matched to pci\n");
+ return;
+ }
+ px_hose = pci_find_hose_for_OF_device(pcix_node);
+ if (px_hose == NULL) {
+ printk("PCI-X bridge found but not matched to host\n");
+ return;
+ }
+ early_read_config_dword(px_hose, px_bus, px_devfn, 0xc4, &cfg);
+ early_read_config_dword(px_hose, px_bus, px_devfn, 0xcc, &freq);
+ dump_HT_speeds("PCI-X HT Uplink", cfg, freq);
+ early_read_config_dword(px_hose, px_bus, px_devfn, 0xc8, &cfg);
+ early_read_config_dword(px_hose, px_bus, px_devfn, 0xd0, &freq);
+ dump_HT_speeds("PCI-X HT Downlink", cfg, freq);
+}
+#endif /* 0 */
+
+/*
+ * Early video resume hook
+ */
+
+static void (*pmac_early_vresume_proc)(void *data);
+static void *pmac_early_vresume_data;
+
+void pmac_set_early_video_resume(void (*proc)(void *data), void *data)
+{
+ if (!machine_is(powermac))
+ return;
+ preempt_disable();
+ pmac_early_vresume_proc = proc;
+ pmac_early_vresume_data = data;
+ preempt_enable();
+}
+EXPORT_SYMBOL(pmac_set_early_video_resume);
+
+void pmac_call_early_video_resume(void)
+{
+ if (pmac_early_vresume_proc)
+ pmac_early_vresume_proc(pmac_early_vresume_data);
+}
+
+/*
+ * AGP related suspend/resume code
+ */
+
+static struct pci_dev *pmac_agp_bridge;
+static int (*pmac_agp_suspend)(struct pci_dev *bridge);
+static int (*pmac_agp_resume)(struct pci_dev *bridge);
+
+void pmac_register_agp_pm(struct pci_dev *bridge,
+ int (*suspend)(struct pci_dev *bridge),
+ int (*resume)(struct pci_dev *bridge))
+{
+ if (suspend || resume) {
+ pmac_agp_bridge = bridge;
+ pmac_agp_suspend = suspend;
+ pmac_agp_resume = resume;
+ return;
+ }
+ if (bridge != pmac_agp_bridge)
+ return;
+ pmac_agp_suspend = pmac_agp_resume = NULL;
+ return;
+}
+EXPORT_SYMBOL(pmac_register_agp_pm);
+
+void pmac_suspend_agp_for_card(struct pci_dev *dev)
+{
+ if (pmac_agp_bridge == NULL || pmac_agp_suspend == NULL)
+ return;
+ if (pmac_agp_bridge->bus != dev->bus)
+ return;
+ pmac_agp_suspend(pmac_agp_bridge);
+}
+EXPORT_SYMBOL(pmac_suspend_agp_for_card);
+
+void pmac_resume_agp_for_card(struct pci_dev *dev)
+{
+ if (pmac_agp_bridge == NULL || pmac_agp_resume == NULL)
+ return;
+ if (pmac_agp_bridge->bus != dev->bus)
+ return;
+ pmac_agp_resume(pmac_agp_bridge);
+}
+EXPORT_SYMBOL(pmac_resume_agp_for_card);
+
+int pmac_get_uninorth_variant(void)
+{
+ return uninorth_maj;
+}
Code Review / kvmfornfv.git / blobdiff