--- /dev/null
+/*
+ * Copyright (C) 2009 Extreme Engineering Solutions, Inc.
+ *
+ * X-ES board-specific functionality
+ *
+ * Based on mpc85xx_ds code from Freescale Semiconductor, Inc.
+ *
+ * Author: Nate Case <ncase@xes-inc.com>
+ *
+ * This is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/interrupt.h>
+#include <linux/of_platform.h>
+
+#include <asm/time.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <mm/mmu_decl.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <asm/mpic.h>
+
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+#include "smp.h"
+
+#include "mpc85xx.h"
+
+/* A few bit definitions needed for fixups on some boards */
+#define MPC85xx_L2CTL_L2E 0x80000000 /* L2 enable */
+#define MPC85xx_L2CTL_L2I 0x40000000 /* L2 flash invalidate */
+#define MPC85xx_L2CTL_L2SIZ_MASK 0x30000000 /* L2 SRAM size (R/O) */
+
+void __init xes_mpc85xx_pic_init(void)
+{
+ struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN,
+ 0, 256, " OpenPIC ");
+ BUG_ON(mpic == NULL);
+ mpic_init(mpic);
+}
+
+static void xes_mpc85xx_configure_l2(void __iomem *l2_base)
+{
+ volatile uint32_t ctl, tmp;
+
+ asm volatile("msync; isync");
+ tmp = in_be32(l2_base);
+
+ /*
+ * xMon may have enabled part of L2 as SRAM, so we need to set it
+ * up for all cache mode just to be safe.
+ */
+ printk(KERN_INFO "xes_mpc85xx: Enabling L2 as cache\n");
+
+ ctl = MPC85xx_L2CTL_L2E | MPC85xx_L2CTL_L2I;
+ if (of_machine_is_compatible("MPC8540") ||
+ of_machine_is_compatible("MPC8560"))
+ /*
+ * Assume L2 SRAM is used fully for cache, so set
+ * L2BLKSZ (bits 4:5) to match L2SIZ (bits 2:3).
+ */
+ ctl |= (tmp & MPC85xx_L2CTL_L2SIZ_MASK) >> 2;
+
+ asm volatile("msync; isync");
+ out_be32(l2_base, ctl);
+ asm volatile("msync; isync");
+}
+
+static void xes_mpc85xx_fixups(void)
+{
+ struct device_node *np;
+ int err;
+
+ /*
+ * Legacy xMon firmware on some X-ES boards does not enable L2
+ * as cache. We must ensure that they get enabled here.
+ */
+ for_each_node_by_name(np, "l2-cache-controller") {
+ struct resource r[2];
+ void __iomem *l2_base;
+
+ /* Only MPC8548, MPC8540, and MPC8560 boards are affected */
+ if (!of_device_is_compatible(np,
+ "fsl,mpc8548-l2-cache-controller") &&
+ !of_device_is_compatible(np,
+ "fsl,mpc8540-l2-cache-controller") &&
+ !of_device_is_compatible(np,
+ "fsl,mpc8560-l2-cache-controller"))
+ continue;
+
+ err = of_address_to_resource(np, 0, &r[0]);
+ if (err) {
+ printk(KERN_WARNING "xes_mpc85xx: Could not get "
+ "resource for device tree node '%s'",
+ np->full_name);
+ continue;
+ }
+
+ l2_base = ioremap(r[0].start, resource_size(&r[0]));
+
+ xes_mpc85xx_configure_l2(l2_base);
+ }
+}
+
+/*
+ * Setup the architecture
+ */
+static void __init xes_mpc85xx_setup_arch(void)
+{
+ struct device_node *root;
+ const char *model = "Unknown";
+
+ root = of_find_node_by_path("/");
+ if (root == NULL)
+ return;
+
+ model = of_get_property(root, "model", NULL);
+
+ printk(KERN_INFO "X-ES MPC85xx-based single-board computer: %s\n",
+ model + strlen("xes,"));
+
+ xes_mpc85xx_fixups();
+
+ mpc85xx_smp_init();
+
+ fsl_pci_assign_primary();
+}
+
+machine_arch_initcall(xes_mpc8572, mpc85xx_common_publish_devices);
+machine_arch_initcall(xes_mpc8548, mpc85xx_common_publish_devices);
+machine_arch_initcall(xes_mpc8540, mpc85xx_common_publish_devices);
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init xes_mpc8572_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ return of_flat_dt_is_compatible(root, "xes,MPC8572");
+}
+
+static int __init xes_mpc8548_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ return of_flat_dt_is_compatible(root, "xes,MPC8548");
+}
+
+static int __init xes_mpc8540_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ return of_flat_dt_is_compatible(root, "xes,MPC8540");
+}
+
+define_machine(xes_mpc8572) {
+ .name = "X-ES MPC8572",
+ .probe = xes_mpc8572_probe,
+ .setup_arch = xes_mpc85xx_setup_arch,
+ .init_IRQ = xes_mpc85xx_pic_init,
+#ifdef CONFIG_PCI
+ .pcibios_fixup_bus = fsl_pcibios_fixup_bus,
+ .pcibios_fixup_phb = fsl_pcibios_fixup_phb,
+#endif
+ .get_irq = mpic_get_irq,
+ .restart = fsl_rstcr_restart,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};
+
+define_machine(xes_mpc8548) {
+ .name = "X-ES MPC8548",
+ .probe = xes_mpc8548_probe,
+ .setup_arch = xes_mpc85xx_setup_arch,
+ .init_IRQ = xes_mpc85xx_pic_init,
+#ifdef CONFIG_PCI
+ .pcibios_fixup_bus = fsl_pcibios_fixup_bus,
+ .pcibios_fixup_phb = fsl_pcibios_fixup_phb,
+#endif
+ .get_irq = mpic_get_irq,
+ .restart = fsl_rstcr_restart,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};
+
+define_machine(xes_mpc8540) {
+ .name = "X-ES MPC8540",
+ .probe = xes_mpc8540_probe,
+ .setup_arch = xes_mpc85xx_setup_arch,
+ .init_IRQ = xes_mpc85xx_pic_init,
+#ifdef CONFIG_PCI
+ .pcibios_fixup_bus = fsl_pcibios_fixup_bus,
+ .pcibios_fixup_phb = fsl_pcibios_fixup_phb,
+#endif
+ .get_irq = mpic_get_irq,
+ .restart = fsl_rstcr_restart,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};
Code Review / kvmfornfv.git / blobdiff