Add the rt linux 4.1.3-rt3 as base

[kvmfornfv.git] / kernel / arch / powerpc / include / asm / reg_8xx.h

diff --git a/kernel/arch/powerpc/include/asm/reg_8xx.h b/kernel/arch/powerpc/include/asm/reg_8xx.h
new file mode 100644 (file)
index 0000000..e8ea346
--- /dev/null
+++ b/kernel/arch/powerpc/include/asm/reg_8xx.h
@@ -0,0 +1,42 @@
+/*
+ * Contains register definitions common to PowerPC 8xx CPUs.  Notice
+ */
+#ifndef _ASM_POWERPC_REG_8xx_H
+#define _ASM_POWERPC_REG_8xx_H
+
+/* Cache control on the MPC8xx is provided through some additional
+ * special purpose registers.
+ */
+#define SPRN_IC_CST    560     /* Instruction cache control/status */
+#define SPRN_IC_ADR    561     /* Address needed for some commands */
+#define SPRN_IC_DAT    562     /* Read-only data register */
+#define SPRN_DC_CST    568     /* Data cache control/status */
+#define SPRN_DC_ADR    569     /* Address needed for some commands */
+#define SPRN_DC_DAT    570     /* Read-only data register */
+
+/* Commands.  Only the first few are available to the instruction cache.
+*/
+#define        IDC_ENABLE      0x02000000      /* Cache enable */
+#define IDC_DISABLE    0x04000000      /* Cache disable */
+#define IDC_LDLCK      0x06000000      /* Load and lock */
+#define IDC_UNLINE     0x08000000      /* Unlock line */
+#define IDC_UNALL      0x0a000000      /* Unlock all */
+#define IDC_INVALL     0x0c000000      /* Invalidate all */
+
+#define DC_FLINE       0x0e000000      /* Flush data cache line */
+#define DC_SFWT                0x01000000      /* Set forced writethrough mode */
+#define DC_CFWT                0x03000000      /* Clear forced writethrough mode */
+#define DC_SLES                0x05000000      /* Set little endian swap mode */
+#define DC_CLES                0x07000000      /* Clear little endian swap mode */
+
+/* Status.
+*/
+#define IDC_ENABLED    0x80000000      /* Cache is enabled */
+#define IDC_CERR1      0x00200000      /* Cache error 1 */
+#define IDC_CERR2      0x00100000      /* Cache error 2 */
+#define IDC_CERR3      0x00080000      /* Cache error 3 */
+
+#define DC_DFWT                0x40000000      /* Data cache is forced write through */
+#define DC_LES         0x20000000      /* Caches are little endian mode */
+
+#endif /* _ASM_POWERPC_REG_8xx_H */