These changes are the raw update to linux-4.4.6-rt14. Kernel sources

[kvmfornfv.git] / kernel / arch / powerpc / boot / dts / ppa8548.dts

diff --git a/kernel/arch/powerpc/boot/dts/ppa8548.dts b/kernel/arch/powerpc/boot/dts/ppa8548.dts
deleted file mode 100644 (file)
index 27b0699..0000000
--- a/kernel/arch/powerpc/boot/dts/ppa8548.dts
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
- * PPA8548 Device Tree Source (36-bit address map)
- * Copyright 2013 Prodrive B.V.
- *
- * Based on:
- * MPC8548 CDS Device Tree Source (36-bit address map)
- * Copyright 2012 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/include/ "fsl/mpc8548si-pre.dtsi"
-
-/ {
-       model = "ppa8548";
-       compatible = "ppa8548";
-       #address-cells = <2>;
-       #size-cells = <2>;
-       interrupt-parent = <&mpic>;
-
-       memory {
-               device_type = "memory";
-               reg = <0 0 0x0 0x40000000>;
-       };
-
-       lbc: localbus@fe0005000 {
-               reg = <0xf 0xe0005000 0 0x1000>;
-               ranges = <0x0 0x0 0xf 0xff800000 0x00800000>;
-       };
-
-       soc: soc8548@fe0000000 {
-               ranges = <0 0xf 0xe0000000 0x100000>;
-       };
-
-       pci0: pci@fe0008000 {
-               /* ppa8548 board doesn't support PCI */
-               status = "disabled";
-       };
-
-       pci1: pci@fe0009000 {
-               /* ppa8548 board doesn't support PCI */
-               status = "disabled";
-       };
-
-       pci2: pcie@fe000a000 {
-               /* ppa8548 board doesn't support PCI */
-               status = "disabled";
-       };
-
-       rio: rapidio@fe00c0000 {
-               reg = <0xf 0xe00c0000 0x0 0x11000>;
-               port1 {
-                       ranges = <0x0 0x0 0x0 0x80000000 0x0 0x40000000>;
-               };
-       };
-};
-
-&lbc {
-       nor@0 {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               compatible = "cfi-flash";
-               reg = <0x0 0x0 0x00800000>;
-               bank-width = <2>;
-               device-width = <2>;
-
-               partition@0 {
-                       reg = <0x0 0x7A0000>;
-                       label = "user";
-               };
-
-               partition@7A0000 {
-                       reg = <0x7A0000 0x20000>;
-                       label = "env";
-                       read-only;
-               };
-
-               partition@7C0000 {
-                       reg = <0x7C0000 0x40000>;
-                       label = "u-boot";
-                       read-only;
-               };
-       };
-};
-
-&soc {
-       i2c@3000 {
-               rtc@6f {
-                       compatible = "intersil,isl1208";
-                       reg = <0x6f>;
-               };
-       };
-
-       i2c@3100 {
-       };
-
-       /*
-        * Only ethernet controller @25000 and @26000 are used.
-        * Use alias enet2 and enet3 for the remainig controllers,
-        * to stay compatible with mpc8548si-pre.dtsi.
-        */
-       enet2: ethernet@24000 {
-               status = "disabled";
-       };
-
-       mdio@24520 {
-               phy0: ethernet-phy@0 {
-                       interrupts = <7 1 0 0>;
-                       reg = <0x0>;
-               };
-               phy1: ethernet-phy@1 {
-                       interrupts = <8 1 0 0>;
-                       reg = <0x1>;
-               };
-               tbi0: tbi-phy@11 {
-                       reg = <0x11>;
-                       device_type = "tbi-phy";
-               };
-       };
-
-       enet0: ethernet@25000 {
-               tbi-handle = <&tbi1>;
-               phy-handle = <&phy0>;
-       };
-
-       mdio@25520 {
-               tbi1: tbi-phy@11 {
-                       reg = <0x11>;
-                       device_type = "tbi-phy";
-               };
-       };
-
-       enet1: ethernet@26000 {
-               tbi-handle = <&tbi2>;
-               phy-handle = <&phy1>;
-       };
-
-       mdio@26520 {
-               tbi2: tbi-phy@11 {
-                       reg = <0x11>;
-                       device_type = "tbi-phy";
-               };
-       };
-
-       enet3: ethernet@27000 {
-               status = "disabled";
-       };
-
-       mdio@27520 {
-               tbi3: tbi-phy@11 {
-                       reg = <0x11>;
-                       device_type = "tbi-phy";
-               };
-       };
-
-       crypto@30000 {
-               status = "disabled";
-       };
-};
-
-/include/ "fsl/mpc8548si-post.dtsi"