Add the rt linux 4.1.3-rt3 as base

[kvmfornfv.git] / kernel / arch / powerpc / boot / dts / pcm030.dts

diff --git a/kernel/arch/powerpc/boot/dts/pcm030.dts b/kernel/arch/powerpc/boot/dts/pcm030.dts
new file mode 100644 (file)
index 0000000..192e66a
--- /dev/null
+++ b/kernel/arch/powerpc/boot/dts/pcm030.dts
@@ -0,0 +1,110 @@
+/*
+ * phyCORE-MPC5200B-tiny (pcm030) board Device Tree Source
+ *
+ * Copyright 2006 Pengutronix
+ * Sascha Hauer <s.hauer@pengutronix.de>
+ * Copyright 2007 Pengutronix
+ * Juergen Beisert <j.beisert@pengutronix.de>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "mpc5200b.dtsi"
+
+&gpt0 { fsl,has-wdt; };
+&gpt2 { gpio-controller; };
+&gpt3 { gpio-controller; };
+&gpt4 { gpio-controller; };
+&gpt5 { gpio-controller; };
+&gpt6 { gpio-controller; };
+&gpt7 { gpio-controller; };
+
+/ {
+       model = "phytec,pcm030";
+       compatible = "phytec,pcm030";
+
+       soc5200@f0000000 {
+               audioplatform: psc@2000 { /* PSC1 in ac97 mode */
+                       compatible = "mpc5200b-psc-ac97","fsl,mpc5200b-psc-ac97";
+                       cell-index = <0>;
+               };
+
+               /* PSC2 port is used by CAN1/2 */
+               psc@2200 {
+                       status = "disabled";
+               };
+
+               psc@2400 { /* PSC3 in UART mode */
+                       compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+               };
+
+               /* PSC4 is ??? */
+               psc@2600 {
+                       status = "disabled";
+               };
+
+               /* PSC5 is ??? */
+               psc@2800 {
+                       status = "disabled";
+               };
+
+               psc@2c00 { /* PSC6 in UART mode */
+                       compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+               };
+
+               ethernet@3000 {
+                       phy-handle = <&phy0>;
+               };
+
+               mdio@3000 {
+                       phy0: ethernet-phy@0 {
+                               reg = <0>;
+                       };
+               };
+
+               i2c@3d40 {
+                       rtc@51 {
+                               compatible = "nxp,pcf8563";
+                               reg = <0x51>;
+                       };
+                       eeprom@52 {
+                               compatible = "catalyst,24c32";
+                               reg = <0x52>;
+                               pagesize = <32>;
+                       };
+               };
+
+               sram@8000 {
+                       compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
+                       reg = <0x8000 0x4000>;
+               };
+       };
+
+       pci@f0000d00 {
+               interrupt-map-mask = <0xf800 0 0 7>;
+               interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
+                                0xc000 0 0 2 &mpc5200_pic 1 1 3
+                                0xc000 0 0 3 &mpc5200_pic 1 2 3
+                                0xc000 0 0 4 &mpc5200_pic 1 3 3
+
+                                0xc800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot
+                                0xc800 0 0 2 &mpc5200_pic 1 2 3
+                                0xc800 0 0 3 &mpc5200_pic 1 3 3
+                                0xc800 0 0 4 &mpc5200_pic 0 0 3>;
+               ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000
+                         0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
+                         0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
+       };
+
+       localbus {
+               status = "disabled";
+       };
+
+       sound {
+               compatible = "phytec,pcm030-audio-fabric";
+               asoc-platform = <&audioplatform>;
+       };
+};