+++ /dev/null
-/*
- * P1022 RDK 32-bit Physical Address Map Device Tree Source
- *
- * Copyright 2012 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * * Neither the name of Freescale Semiconductor nor the
- * names of its contributors may be used to endorse or promote products
- * derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/include/ "fsl/p1022si-pre.dtsi"
-/ {
- model = "fsl,P1022RDK";
- compatible = "fsl,P1022RDK";
-
- memory {
- device_type = "memory";
- };
-
- board_lbc: lbc: localbus@ffe05000 {
- /* The P1022 RDK does not have any localbus devices */
- status = "disabled";
- };
-
- board_soc: soc: soc@ffe00000 {
- ranges = <0x0 0x0 0xffe00000 0x100000>;
-
- i2c@3100 {
- wm8960:codec@1a {
- compatible = "wlf,wm8960";
- reg = <0x1a>;
- /* MCLK source is a stand-alone oscillator */
- clock-frequency = <12288000>;
- };
- rtc@68 {
- compatible = "stm,m41t62";
- reg = <0x68>;
- };
- adt7461@4c{
- compatible = "adi,adt7461";
- reg = <0x4c>;
- };
- zl6100@21{
- compatible = "isil,zl6100";
- reg = <0x21>;
- };
- zl6100@24{
- compatible = "isil,zl6100";
- reg = <0x24>;
- };
- zl6100@26{
- compatible = "isil,zl6100";
- reg = <0x26>;
- };
- zl6100@29{
- compatible = "isil,zl6100";
- reg = <0x29>;
- };
- };
-
- spi@7000 {
- flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "spansion,m25p80";
- reg = <0>;
- spi-max-frequency = <1000000>;
- partition@0 {
- label = "full-spi-flash";
- reg = <0x00000000 0x00100000>;
- };
- };
- };
-
- ssi@15000 {
- fsl,mode = "i2s-slave";
- codec-handle = <&wm8960>;
- };
-
- usb@22000 {
- phy_type = "ulpi";
- };
-
- usb@23000 {
- phy_type = "ulpi";
- };
-
- mdio@24000 {
- phy0: ethernet-phy@0 {
- interrupts = <3 1 0 0>;
- reg = <0x1>;
- };
- phy1: ethernet-phy@1 {
- interrupts = <9 1 0 0>;
- reg = <0x2>;
- };
- };
-
- mdio@25000 {
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- ethernet@b0000 {
- phy-handle = <&phy0>;
- phy-connection-type = "rgmii-id";
- };
-
- ethernet@b1000 {
- phy-handle = <&phy1>;
- tbi-handle = <&tbi0>;
- phy-connection-type = "sgmii";
- };
- };
-
- pci0: pcie@ffe09000 {
- ranges = <0x2000000 0x0 0xe0000000 0 0xa0000000 0x0 0x20000000
- 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
- reg = <0x0 0xffe09000 0 0x1000>;
- pcie@0 {
- ranges = <0x2000000 0x0 0xe0000000
- 0x2000000 0x0 0xe0000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x100000>;
- };
- };
-
- pci1: pcie@ffe0a000 {
- ranges = <0x2000000 0x0 0xe0000000 0 0xc0000000 0x0 0x20000000
- 0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
- reg = <0 0xffe0a000 0 0x1000>;
- pcie@0 {
- ranges = <0x2000000 0x0 0xe0000000
- 0x2000000 0x0 0xe0000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x100000>;
- };
- };
-
- pci2: pcie@ffe0b000 {
- ranges = <0x2000000 0x0 0xe0000000 0 0x80000000 0x0 0x20000000
- 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
- reg = <0 0xffe0b000 0 0x1000>;
- pcie@0 {
- ranges = <0x2000000 0x0 0xe0000000
- 0x2000000 0x0 0xe0000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x100000>;
- };
- };
-};
-
-/include/ "fsl/p1022si-post.dtsi"
Code Review / kvmfornfv.git / blobdiff