+++ /dev/null
-/*
- * MPC8548CDS Device Tree Source stub (no addresses or top-level ranges)
- *
- * Copyright 2012 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * * Neither the name of Freescale Semiconductor nor the
- * names of its contributors may be used to endorse or promote products
- * derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-&board_lbc {
- nor@0,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "cfi-flash";
- reg = <0x0 0x0 0x01000000>;
- bank-width = <2>;
- device-width = <2>;
-
- partition@0 {
- reg = <0x0 0x0b00000>;
- label = "ramdisk-nor";
- };
-
- partition@300000 {
- reg = <0x0b00000 0x0400000>;
- label = "kernel-nor";
- };
-
- partition@700000 {
- reg = <0x0f00000 0x060000>;
- label = "dtb-nor";
- };
-
- partition@760000 {
- reg = <0x0f60000 0x020000>;
- label = "env-nor";
- read-only;
- };
-
- partition@780000 {
- reg = <0x0f80000 0x080000>;
- label = "u-boot-nor";
- read-only;
- };
- };
-
- board-control@1,0 {
- compatible = "fsl,mpc8548cds-fpga";
- reg = <0x1 0x0 0x1000>;
- };
-};
-
-&board_soc {
- i2c@3000 {
- eeprom@50 {
- compatible = "atmel,24c64";
- reg = <0x50>;
- };
-
- eeprom@56 {
- compatible = "atmel,24c64";
- reg = <0x56>;
- };
-
- eeprom@57 {
- compatible = "atmel,24c64";
- reg = <0x57>;
- };
- };
-
- i2c@3100 {
- eeprom@50 {
- compatible = "atmel,24c64";
- reg = <0x50>;
- };
- };
-
- enet0: ethernet@24000 {
- tbi-handle = <&tbi0>;
- phy-handle = <&phy0>;
- };
-
- mdio@24520 {
- phy0: ethernet-phy@0 {
- interrupts = <5 1 0 0>;
- reg = <0x0>;
- };
- phy1: ethernet-phy@1 {
- interrupts = <5 1 0 0>;
- reg = <0x1>;
- };
- phy2: ethernet-phy@2 {
- interrupts = <5 1 0 0>;
- reg = <0x2>;
- };
- phy3: ethernet-phy@3 {
- interrupts = <5 1 0 0>;
- reg = <0x3>;
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- enet1: ethernet@25000 {
- tbi-handle = <&tbi1>;
- phy-handle = <&phy1>;
- };
-
- mdio@25520 {
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- enet2: ethernet@26000 {
- tbi-handle = <&tbi2>;
- phy-handle = <&phy2>;
- };
-
- mdio@26520 {
- tbi2: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- enet3: ethernet@27000 {
- tbi-handle = <&tbi3>;
- phy-handle = <&phy3>;
- };
-
- mdio@27520 {
- tbi3: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-};
-
-&board_pci0 {
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x4 (PCIX Slot 2) */
- 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
- 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
- 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
- 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
-
- /* IDSEL 0x5 (PCIX Slot 3) */
- 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0
- 0x2800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0
- 0x2800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0
- 0x2800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0
-
- /* IDSEL 0x6 (PCIX Slot 4) */
- 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
- 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
- 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0
- 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
-
- /* IDSEL 0x8 (PCIX Slot 5) */
- 0x4000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
- 0x4000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
- 0x4000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
- 0x4000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
-
- /* IDSEL 0xC (Tsi310 bridge) */
- 0x6000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
- 0x6000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
- 0x6000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
- 0x6000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
-
- /* IDSEL 0x14 (Slot 2) */
- 0xa000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
- 0xa000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
- 0xa000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
- 0xa000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
-
- /* IDSEL 0x15 (Slot 3) */
- 0xa800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0
- 0xa800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0
- 0xa800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0
- 0xa800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0
-
- /* IDSEL 0x16 (Slot 4) */
- 0xb000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
- 0xb000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
- 0xb000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0
- 0xb000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
-
- /* IDSEL 0x18 (Slot 5) */
- 0xc000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
- 0xc000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
- 0xc000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
- 0xc000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
-
- /* IDSEL 0x1C (Tsi310 bridge PCI primary) */
- 0xe000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
- 0xe000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
- 0xe000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
- 0xe000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>;
-
- pci_bridge@1c {
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
-
- /* IDSEL 0x00 (PrPMC Site) */
- 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
- 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
- 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
- 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
-
- /* IDSEL 0x04 (VIA chip) */
- 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
- 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
- 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
- 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
-
- /* IDSEL 0x05 (8139) */
- 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0
-
- /* IDSEL 0x06 (Slot 6) */
- 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
- 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
- 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0
- 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
-
- /* IDESL 0x07 (Slot 7) */
- 0x3800 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
- 0x3800 0x0 0x0 0x2 &mpic 0x0 0x1 0 0
- 0x3800 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
- 0x3800 0x0 0x0 0x4 &mpic 0x2 0x1 0 0>;
-
- reg = <0xe000 0x0 0x0 0x0 0x0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- ranges = <0x2000000 0x0 0x80000000
- 0x2000000 0x0 0x80000000
- 0x0 0x20000000
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x80000>;
- clock-frequency = <33333333>;
-
- isa@4 {
- device_type = "isa";
- #interrupt-cells = <2>;
- #size-cells = <1>;
- #address-cells = <2>;
- reg = <0x2000 0x0 0x0 0x0 0x0>;
- ranges = <0x1 0x0 0x1000000 0x0 0x0 0x1000>;
- interrupt-parent = <&i8259>;
-
- i8259: interrupt-controller@20 {
- interrupt-controller;
- device_type = "interrupt-controller";
- reg = <0x1 0x20 0x2
- 0x1 0xa0 0x2
- 0x1 0x4d0 0x2>;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- compatible = "chrp,iic";
- interrupts = <0 1 0 0>;
- interrupt-parent = <&mpic>;
- };
-
- rtc@70 {
- compatible = "pnpPNP,b00";
- reg = <0x1 0x70 0x2>;
- };
- };
- };
-};
Code Review / kvmfornfv.git / blobdiff