Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / arch / powerpc / boot / dts / bsc9132qds.dtsi
diff --git a/kernel/arch/powerpc/boot/dts/bsc9132qds.dtsi b/kernel/arch/powerpc/boot/dts/bsc9132qds.dtsi
new file mode 100644 (file)
index 0000000..af8e888
--- /dev/null
@@ -0,0 +1,101 @@
+/*
+ * BSC9132 QDS Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&ifc {
+       nor@0,0 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "cfi-flash";
+               reg = <0x0 0x0 0x8000000>;
+               bank-width = <2>;
+               device-width = <1>;
+       };
+
+       nand@1,0 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "fsl,ifc-nand";
+               reg = <0x1 0x0 0x4000>;
+       };
+};
+
+&soc {
+       spi@7000 {
+               flash@0 {
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       compatible = "spansion,s25sl12801";
+                       reg = <0>;
+                       spi-max-frequency = <30000000>;
+               };
+       };
+
+       i2c@3000 {
+               fpga: fpga@66 {
+                       compatible = "fsl,bsc9132qds-fpga", "fsl,fpga-qixis-i2c";
+                       reg = <0x66>;
+               };
+       };
+
+       usb@22000 {
+               phy_type = "ulpi";
+       };
+
+       mdio@24000 {
+               phy0: ethernet-phy@0 {
+                       reg = <0x0>;
+               };
+
+               phy1: ethernet-phy@1 {
+                       reg = <0x1>;
+               };
+
+               tbi0: tbi-phy@11 {
+                       reg = <0x1f>;
+                       device_type = "tbi-phy";
+               };
+       };
+
+       enet0: ethernet@b0000 {
+               phy-handle = <&phy0>;
+               tbi-handle = <&tbi0>;
+               phy-connection-type = "sgmii";
+       };
+
+       enet1: ethernet@b1000 {
+               phy-handle = <&phy1>;
+               tbi-handle = <&tbi0>;
+               phy-connection-type = "sgmii";
+       };
+};