Add the rt linux 4.1.3-rt3 as base

[kvmfornfv.git] / kernel / arch / mips / netlogic / xlp / cop2-ex.c

diff --git a/kernel/arch/mips/netlogic/xlp/cop2-ex.c b/kernel/arch/mips/netlogic/xlp/cop2-ex.c
new file mode 100644 (file)
index 0000000..52bc5de
--- /dev/null
+++ b/kernel/arch/mips/netlogic/xlp/cop2-ex.c
@@ -0,0 +1,118 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2013 Broadcom Corporation.
+ *
+ * based on arch/mips/cavium-octeon/cpu.c
+ * Copyright (C) 2009 Wind River Systems,
+ *   written by Ralf Baechle <ralf@linux-mips.org>
+ */
+#include <linux/init.h>
+#include <linux/irqflags.h>
+#include <linux/notifier.h>
+#include <linux/prefetch.h>
+#include <linux/sched.h>
+
+#include <asm/cop2.h>
+#include <asm/current.h>
+#include <asm/mipsregs.h>
+#include <asm/page.h>
+
+#include <asm/netlogic/mips-extns.h>
+
+/*
+ * 64 bit ops are done in inline assembly to support 32 bit
+ * compilation
+ */
+void nlm_cop2_save(struct nlm_cop2_state *r)
+{
+       asm volatile(
+               ".set   push\n"
+               ".set   noat\n"
+               "dmfc2  $1, $0, 0\n"
+               "sd     $1, 0(%1)\n"
+               "dmfc2  $1, $0, 1\n"
+               "sd     $1, 8(%1)\n"
+               "dmfc2  $1, $0, 2\n"
+               "sd     $1, 16(%1)\n"
+               "dmfc2  $1, $0, 3\n"
+               "sd     $1, 24(%1)\n"
+               "dmfc2  $1, $1, 0\n"
+               "sd     $1, 0(%2)\n"
+               "dmfc2  $1, $1, 1\n"
+               "sd     $1, 8(%2)\n"
+               "dmfc2  $1, $1, 2\n"
+               "sd     $1, 16(%2)\n"
+               "dmfc2  $1, $1, 3\n"
+               "sd     $1, 24(%2)\n"
+               ".set   pop\n"
+               : "=m"(*r)
+               : "r"(r->tx), "r"(r->rx));
+
+       r->tx_msg_status = __read_32bit_c2_register($2, 0);
+       r->rx_msg_status = __read_32bit_c2_register($3, 0) & 0x0fffffff;
+}
+
+void nlm_cop2_restore(struct nlm_cop2_state *r)
+{
+       u32 rstat;
+
+       asm volatile(
+               ".set   push\n"
+               ".set   noat\n"
+               "ld     $1, 0(%1)\n"
+               "dmtc2  $1, $0, 0\n"
+               "ld     $1, 8(%1)\n"
+               "dmtc2  $1, $0, 1\n"
+               "ld     $1, 16(%1)\n"
+               "dmtc2  $1, $0, 2\n"
+               "ld     $1, 24(%1)\n"
+               "dmtc2  $1, $0, 3\n"
+               "ld     $1, 0(%2)\n"
+               "dmtc2  $1, $1, 0\n"
+               "ld     $1, 8(%2)\n"
+               "dmtc2  $1, $1, 1\n"
+               "ld     $1, 16(%2)\n"
+               "dmtc2  $1, $1, 2\n"
+               "ld     $1, 24(%2)\n"
+               "dmtc2  $1, $1, 3\n"
+               ".set   pop\n"
+               : : "m"(*r), "r"(r->tx), "r"(r->rx));
+
+       __write_32bit_c2_register($2, 0, r->tx_msg_status);
+       rstat = __read_32bit_c2_register($3, 0) & 0xf0000000u;
+       __write_32bit_c2_register($3, 0, r->rx_msg_status | rstat);
+}
+
+static int nlm_cu2_call(struct notifier_block *nfb, unsigned long action,
+       void *data)
+{
+       unsigned long flags;
+       unsigned int status;
+
+       switch (action) {
+       case CU2_EXCEPTION:
+               if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO))
+                       break;
+               local_irq_save(flags);
+               KSTK_STATUS(current) |= ST0_CU2;
+               status = read_c0_status();
+               write_c0_status(status | ST0_CU2);
+               nlm_cop2_restore(&(current->thread.cp2));
+               write_c0_status(status & ~ST0_CU2);
+               local_irq_restore(flags);
+               pr_info("COP2 access enabled for pid %d (%s)\n",
+                                       current->pid, current->comm);
+               return NOTIFY_BAD;      /* Don't call default notifier */
+       }
+
+       return NOTIFY_OK;               /* Let default notifier send signals */
+}
+
+static int __init nlm_cu2_setup(void)
+{
+       return cu2_notifier(nlm_cu2_call, 0);
+}
+early_initcall(nlm_cu2_setup);