These changes are the raw update to linux-4.4.6-rt14. Kernel sources

[kvmfornfv.git] / kernel / arch / mips / loongson / Kconfig

diff --git a/kernel/arch/mips/loongson/Kconfig b/kernel/arch/mips/loongson/Kconfig
deleted file mode 100644 (file)
index 156de85..0000000
--- a/kernel/arch/mips/loongson/Kconfig
+++ /dev/null
@@ -1,158 +0,0 @@
-if MACH_LOONGSON
-
-choice
-       prompt "Machine Type"
-
-config LEMOTE_FULOONG2E
-       bool "Lemote Fuloong(2e) mini-PC"
-       select ARCH_SPARSEMEM_ENABLE
-       select CEVT_R4K
-       select CSRC_R4K
-       select SYS_HAS_CPU_LOONGSON2E
-       select DMA_NONCOHERENT
-       select BOOT_ELF32
-       select BOARD_SCACHE
-       select HW_HAS_PCI
-       select I8259
-       select ISA
-       select IRQ_CPU
-       select SYS_SUPPORTS_32BIT_KERNEL
-       select SYS_SUPPORTS_64BIT_KERNEL
-       select SYS_SUPPORTS_LITTLE_ENDIAN
-       select SYS_SUPPORTS_HIGHMEM
-       select SYS_HAS_EARLY_PRINTK
-       select GENERIC_ISA_DMA_SUPPORT_BROKEN
-       select CPU_HAS_WB
-       select LOONGSON_MC146818
-       help
-         Lemote Fuloong(2e) mini-PC board based on the Chinese Loongson-2E CPU and
-         an FPGA northbridge
-
-         Lemote Fuloong(2e) mini PC have a VIA686B south bridge.
-
-config LEMOTE_MACH2F
-       bool "Lemote Loongson 2F family machines"
-       select ARCH_SPARSEMEM_ENABLE
-       select BOARD_SCACHE
-       select BOOT_ELF32
-       select CEVT_R4K if ! MIPS_EXTERNAL_TIMER
-       select CPU_HAS_WB
-       select CS5536
-       select CSRC_R4K if ! MIPS_EXTERNAL_TIMER
-       select DMA_NONCOHERENT
-       select GENERIC_ISA_DMA_SUPPORT_BROKEN
-       select HAVE_CLK
-       select HW_HAS_PCI
-       select I8259
-       select IRQ_CPU
-       select ISA
-       select SYS_HAS_CPU_LOONGSON2F
-       select SYS_HAS_EARLY_PRINTK
-       select SYS_SUPPORTS_32BIT_KERNEL
-       select SYS_SUPPORTS_64BIT_KERNEL
-       select SYS_SUPPORTS_HIGHMEM
-       select SYS_SUPPORTS_LITTLE_ENDIAN
-       select LOONGSON_MC146818
-       help
-         Lemote Loongson 2F family machines utilize the 2F revision of
-         Loongson processor and the AMD CS5536 south bridge.
-
-         These family machines include fuloong2f mini PC, yeeloong2f notebook,
-         LingLoong allinone PC and so forth.
-
-config LOONGSON_MACH3X
-       bool "Generic Loongson 3 family machines"
-       select ARCH_SPARSEMEM_ENABLE
-       select GENERIC_ISA_DMA_SUPPORT_BROKEN
-       select BOOT_ELF32
-       select BOARD_SCACHE
-       select CSRC_R4K
-       select CEVT_R4K
-       select CPU_HAS_WB
-       select HW_HAS_PCI
-       select ISA
-       select HT_PCI
-       select I8259
-       select IRQ_CPU
-       select NR_CPUS_DEFAULT_4
-       select SYS_HAS_CPU_LOONGSON3
-       select SYS_HAS_EARLY_PRINTK
-       select SYS_SUPPORTS_SMP
-       select SYS_SUPPORTS_HOTPLUG_CPU
-       select SYS_SUPPORTS_NUMA
-       select SYS_SUPPORTS_64BIT_KERNEL
-       select SYS_SUPPORTS_HIGHMEM
-       select SYS_SUPPORTS_LITTLE_ENDIAN
-       select LOONGSON_MC146818
-       select ZONE_DMA32
-       select LEFI_FIRMWARE_INTERFACE
-       select PHYS48_TO_HT40
-       help
-               Generic Loongson 3 family machines utilize the 3A/3B revision
-               of Loongson processor and RS780/SBX00 chipset.
-endchoice
-
-config CS5536
-       bool
-
-config CS5536_MFGPT
-       bool "CS5536 MFGPT Timer"
-       depends on CS5536 && !HIGH_RES_TIMERS
-       select MIPS_EXTERNAL_TIMER
-       help
-         This option enables the mfgpt0 timer of AMD CS5536. With this timer
-         switched on you can not use high resolution timers.
-
-         If you want to enable the Loongson2 CPUFreq Driver, Please enable
-         this option at first, otherwise, You will get wrong system time.
-
-         If unsure, say Yes.
-
-config RS780_HPET
-       bool "RS780/SBX00 HPET Timer"
-       depends on LOONGSON_MACH3X
-       select MIPS_EXTERNAL_TIMER
-       help
-         This option enables the hpet timer of AMD RS780/SBX00.
-
-         If you want to enable the Loongson3 CPUFreq Driver, Please enable
-         this option at first, otherwise, You will get wrong system time.
-
-         If unsure, say Yes.
-
-config LOONGSON_SUSPEND
-       bool
-       default y
-       depends on CPU_SUPPORTS_CPUFREQ && SUSPEND
-
-config LOONGSON_UART_BASE
-       bool
-       default y
-       depends on EARLY_PRINTK || SERIAL_8250
-
-config IOMMU_HELPER
-       bool
-
-config NEED_SG_DMA_LENGTH
-       bool
-
-config SWIOTLB
-       bool "Soft IOMMU Support for All-Memory DMA"
-       default y
-       depends on CPU_LOONGSON3
-       select IOMMU_HELPER
-       select NEED_SG_DMA_LENGTH
-       select NEED_DMA_MAP_STATE
-
-config PHYS48_TO_HT40
-       bool
-       default y if CPU_LOONGSON3
-
-config LOONGSON_MC146818
-       bool
-       default n
-
-config LEFI_FIRMWARE_INTERFACE
-       bool
-
-endif # MACH_LOONGSON