Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / arch / mips / kernel / unaligned.c
diff --git a/kernel/arch/mips/kernel/unaligned.c b/kernel/arch/mips/kernel/unaligned.c
new file mode 100644 (file)
index 0000000..af84bef
--- /dev/null
@@ -0,0 +1,2244 @@
+/*
+ * Handle unaligned accesses by emulation.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 1998, 1999, 2002 by Ralf Baechle
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ * Copyright (C) 2014 Imagination Technologies Ltd.
+ *
+ * This file contains exception handler for address error exception with the
+ * special capability to execute faulting instructions in software.  The
+ * handler does not try to handle the case when the program counter points
+ * to an address not aligned to a word boundary.
+ *
+ * Putting data to unaligned addresses is a bad practice even on Intel where
+ * only the performance is affected.  Much worse is that such code is non-
+ * portable.  Due to several programs that die on MIPS due to alignment
+ * problems I decided to implement this handler anyway though I originally
+ * didn't intend to do this at all for user code.
+ *
+ * For now I enable fixing of address errors by default to make life easier.
+ * I however intend to disable this somewhen in the future when the alignment
+ * problems with user programs have been fixed.         For programmers this is the
+ * right way to go.
+ *
+ * Fixing address errors is a per process option.  The option is inherited
+ * across fork(2) and execve(2) calls. If you really want to use the
+ * option in your user programs - I discourage the use of the software
+ * emulation strongly - use the following code in your userland stuff:
+ *
+ * #include <sys/sysmips.h>
+ *
+ * ...
+ * sysmips(MIPS_FIXADE, x);
+ * ...
+ *
+ * The argument x is 0 for disabling software emulation, enabled otherwise.
+ *
+ * Below a little program to play around with this feature.
+ *
+ * #include <stdio.h>
+ * #include <sys/sysmips.h>
+ *
+ * struct foo {
+ *        unsigned char bar[8];
+ * };
+ *
+ * main(int argc, char *argv[])
+ * {
+ *        struct foo x = {0, 1, 2, 3, 4, 5, 6, 7};
+ *        unsigned int *p = (unsigned int *) (x.bar + 3);
+ *        int i;
+ *
+ *        if (argc > 1)
+ *                sysmips(MIPS_FIXADE, atoi(argv[1]));
+ *
+ *        printf("*p = %08lx\n", *p);
+ *
+ *        *p = 0xdeadface;
+ *
+ *        for(i = 0; i <= 7; i++)
+ *        printf("%02x ", x.bar[i]);
+ *        printf("\n");
+ * }
+ *
+ * Coprocessor loads are not supported; I think this case is unimportant
+ * in the practice.
+ *
+ * TODO: Handle ndc (attempted store to doubleword in uncached memory)
+ *      exception for the R6000.
+ *      A store crossing a page boundary might be executed only partially.
+ *      Undo the partial store in this case.
+ */
+#include <linux/context_tracking.h>
+#include <linux/mm.h>
+#include <linux/signal.h>
+#include <linux/smp.h>
+#include <linux/sched.h>
+#include <linux/debugfs.h>
+#include <linux/perf_event.h>
+
+#include <asm/asm.h>
+#include <asm/branch.h>
+#include <asm/byteorder.h>
+#include <asm/cop2.h>
+#include <asm/fpu.h>
+#include <asm/fpu_emulator.h>
+#include <asm/inst.h>
+#include <asm/uaccess.h>
+
+#define STR(x) __STR(x)
+#define __STR(x)  #x
+
+enum {
+       UNALIGNED_ACTION_QUIET,
+       UNALIGNED_ACTION_SIGNAL,
+       UNALIGNED_ACTION_SHOW,
+};
+#ifdef CONFIG_DEBUG_FS
+static u32 unaligned_instructions;
+static u32 unaligned_action;
+#else
+#define unaligned_action UNALIGNED_ACTION_QUIET
+#endif
+extern void show_registers(struct pt_regs *regs);
+
+#ifdef __BIG_ENDIAN
+#define     _LoadHW(addr, value, res, type)  \
+do {                                                        \
+               __asm__ __volatile__ (".set\tnoat\n"        \
+                       "1:\t"type##_lb("%0", "0(%2)")"\n"  \
+                       "2:\t"type##_lbu("$1", "1(%2)")"\n\t"\
+                       "sll\t%0, 0x8\n\t"                  \
+                       "or\t%0, $1\n\t"                    \
+                       "li\t%1, 0\n"                       \
+                       "3:\t.set\tat\n\t"                  \
+                       ".insn\n\t"                         \
+                       ".section\t.fixup,\"ax\"\n\t"       \
+                       "4:\tli\t%1, %3\n\t"                \
+                       "j\t3b\n\t"                         \
+                       ".previous\n\t"                     \
+                       ".section\t__ex_table,\"a\"\n\t"    \
+                       STR(PTR)"\t1b, 4b\n\t"              \
+                       STR(PTR)"\t2b, 4b\n\t"              \
+                       ".previous"                         \
+                       : "=&r" (value), "=r" (res)         \
+                       : "r" (addr), "i" (-EFAULT));       \
+} while(0)
+
+#ifndef CONFIG_CPU_MIPSR6
+#define     _LoadW(addr, value, res, type)   \
+do {                                                        \
+               __asm__ __volatile__ (                      \
+                       "1:\t"type##_lwl("%0", "(%2)")"\n"   \
+                       "2:\t"type##_lwr("%0", "3(%2)")"\n\t"\
+                       "li\t%1, 0\n"                       \
+                       "3:\n\t"                            \
+                       ".insn\n\t"                         \
+                       ".section\t.fixup,\"ax\"\n\t"       \
+                       "4:\tli\t%1, %3\n\t"                \
+                       "j\t3b\n\t"                         \
+                       ".previous\n\t"                     \
+                       ".section\t__ex_table,\"a\"\n\t"    \
+                       STR(PTR)"\t1b, 4b\n\t"              \
+                       STR(PTR)"\t2b, 4b\n\t"              \
+                       ".previous"                         \
+                       : "=&r" (value), "=r" (res)         \
+                       : "r" (addr), "i" (-EFAULT));       \
+} while(0)
+
+#else
+/* MIPSR6 has no lwl instruction */
+#define     _LoadW(addr, value, res, type) \
+do {                                                        \
+               __asm__ __volatile__ (                      \
+                       ".set\tpush\n"                      \
+                       ".set\tnoat\n\t"                    \
+                       "1:"type##_lb("%0", "0(%2)")"\n\t"  \
+                       "2:"type##_lbu("$1", "1(%2)")"\n\t" \
+                       "sll\t%0, 0x8\n\t"                  \
+                       "or\t%0, $1\n\t"                    \
+                       "3:"type##_lbu("$1", "2(%2)")"\n\t" \
+                       "sll\t%0, 0x8\n\t"                  \
+                       "or\t%0, $1\n\t"                    \
+                       "4:"type##_lbu("$1", "3(%2)")"\n\t" \
+                       "sll\t%0, 0x8\n\t"                  \
+                       "or\t%0, $1\n\t"                    \
+                       "li\t%1, 0\n"                       \
+                       ".set\tpop\n"                       \
+                       "10:\n\t"                           \
+                       ".insn\n\t"                         \
+                       ".section\t.fixup,\"ax\"\n\t"       \
+                       "11:\tli\t%1, %3\n\t"               \
+                       "j\t10b\n\t"                        \
+                       ".previous\n\t"                     \
+                       ".section\t__ex_table,\"a\"\n\t"    \
+                       STR(PTR)"\t1b, 11b\n\t"             \
+                       STR(PTR)"\t2b, 11b\n\t"             \
+                       STR(PTR)"\t3b, 11b\n\t"             \
+                       STR(PTR)"\t4b, 11b\n\t"             \
+                       ".previous"                         \
+                       : "=&r" (value), "=r" (res)         \
+                       : "r" (addr), "i" (-EFAULT));       \
+} while(0)
+
+#endif /* CONFIG_CPU_MIPSR6 */
+
+#define     _LoadHWU(addr, value, res, type) \
+do {                                                        \
+               __asm__ __volatile__ (                      \
+                       ".set\tnoat\n"                      \
+                       "1:\t"type##_lbu("%0", "0(%2)")"\n" \
+                       "2:\t"type##_lbu("$1", "1(%2)")"\n\t"\
+                       "sll\t%0, 0x8\n\t"                  \
+                       "or\t%0, $1\n\t"                    \
+                       "li\t%1, 0\n"                       \
+                       "3:\n\t"                            \
+                       ".insn\n\t"                         \
+                       ".set\tat\n\t"                      \
+                       ".section\t.fixup,\"ax\"\n\t"       \
+                       "4:\tli\t%1, %3\n\t"                \
+                       "j\t3b\n\t"                         \
+                       ".previous\n\t"                     \
+                       ".section\t__ex_table,\"a\"\n\t"    \
+                       STR(PTR)"\t1b, 4b\n\t"              \
+                       STR(PTR)"\t2b, 4b\n\t"              \
+                       ".previous"                         \
+                       : "=&r" (value), "=r" (res)         \
+                       : "r" (addr), "i" (-EFAULT));       \
+} while(0)
+
+#ifndef CONFIG_CPU_MIPSR6
+#define     _LoadWU(addr, value, res, type)  \
+do {                                                        \
+               __asm__ __volatile__ (                      \
+                       "1:\t"type##_lwl("%0", "(%2)")"\n"  \
+                       "2:\t"type##_lwr("%0", "3(%2)")"\n\t"\
+                       "dsll\t%0, %0, 32\n\t"              \
+                       "dsrl\t%0, %0, 32\n\t"              \
+                       "li\t%1, 0\n"                       \
+                       "3:\n\t"                            \
+                       ".insn\n\t"                         \
+                       "\t.section\t.fixup,\"ax\"\n\t"     \
+                       "4:\tli\t%1, %3\n\t"                \
+                       "j\t3b\n\t"                         \
+                       ".previous\n\t"                     \
+                       ".section\t__ex_table,\"a\"\n\t"    \
+                       STR(PTR)"\t1b, 4b\n\t"              \
+                       STR(PTR)"\t2b, 4b\n\t"              \
+                       ".previous"                         \
+                       : "=&r" (value), "=r" (res)         \
+                       : "r" (addr), "i" (-EFAULT));       \
+} while(0)
+
+#define     _LoadDW(addr, value, res)  \
+do {                                                        \
+               __asm__ __volatile__ (                      \
+                       "1:\tldl\t%0, (%2)\n"               \
+                       "2:\tldr\t%0, 7(%2)\n\t"            \
+                       "li\t%1, 0\n"                       \
+                       "3:\n\t"                            \
+                       ".insn\n\t"                         \
+                       "\t.section\t.fixup,\"ax\"\n\t"     \
+                       "4:\tli\t%1, %3\n\t"                \
+                       "j\t3b\n\t"                         \
+                       ".previous\n\t"                     \
+                       ".section\t__ex_table,\"a\"\n\t"    \
+                       STR(PTR)"\t1b, 4b\n\t"              \
+                       STR(PTR)"\t2b, 4b\n\t"              \
+                       ".previous"                         \
+                       : "=&r" (value), "=r" (res)         \
+                       : "r" (addr), "i" (-EFAULT));       \
+} while(0)
+
+#else
+/* MIPSR6 has not lwl and ldl instructions */
+#define            _LoadWU(addr, value, res, type) \
+do {                                                        \
+               __asm__ __volatile__ (                      \
+                       ".set\tpush\n\t"                    \
+                       ".set\tnoat\n\t"                    \
+                       "1:"type##_lbu("%0", "0(%2)")"\n\t" \
+                       "2:"type##_lbu("$1", "1(%2)")"\n\t" \
+                       "sll\t%0, 0x8\n\t"                  \
+                       "or\t%0, $1\n\t"                    \
+                       "3:"type##_lbu("$1", "2(%2)")"\n\t" \
+                       "sll\t%0, 0x8\n\t"                  \
+                       "or\t%0, $1\n\t"                    \
+                       "4:"type##_lbu("$1", "3(%2)")"\n\t" \
+                       "sll\t%0, 0x8\n\t"                  \
+                       "or\t%0, $1\n\t"                    \
+                       "li\t%1, 0\n"                       \
+                       ".set\tpop\n"                       \
+                       "10:\n\t"                           \
+                       ".insn\n\t"                         \
+                       ".section\t.fixup,\"ax\"\n\t"       \
+                       "11:\tli\t%1, %3\n\t"               \
+                       "j\t10b\n\t"                        \
+                       ".previous\n\t"                     \
+                       ".section\t__ex_table,\"a\"\n\t"    \
+                       STR(PTR)"\t1b, 11b\n\t"             \
+                       STR(PTR)"\t2b, 11b\n\t"             \
+                       STR(PTR)"\t3b, 11b\n\t"             \
+                       STR(PTR)"\t4b, 11b\n\t"             \
+                       ".previous"                         \
+                       : "=&r" (value), "=r" (res)         \
+                       : "r" (addr), "i" (-EFAULT));       \
+} while(0)
+
+#define     _LoadDW(addr, value, res)  \
+do {                                                        \
+               __asm__ __volatile__ (                      \
+                       ".set\tpush\n\t"                    \
+                       ".set\tnoat\n\t"                    \
+                       "1:lb\t%0, 0(%2)\n\t"               \
+                       "2:lbu\t $1, 1(%2)\n\t"             \
+                       "dsll\t%0, 0x8\n\t"                 \
+                       "or\t%0, $1\n\t"                    \
+                       "3:lbu\t$1, 2(%2)\n\t"              \
+                       "dsll\t%0, 0x8\n\t"                 \
+                       "or\t%0, $1\n\t"                    \
+                       "4:lbu\t$1, 3(%2)\n\t"              \
+                       "dsll\t%0, 0x8\n\t"                 \
+                       "or\t%0, $1\n\t"                    \
+                       "5:lbu\t$1, 4(%2)\n\t"              \
+                       "dsll\t%0, 0x8\n\t"                 \
+                       "or\t%0, $1\n\t"                    \
+                       "6:lbu\t$1, 5(%2)\n\t"              \
+                       "dsll\t%0, 0x8\n\t"                 \
+                       "or\t%0, $1\n\t"                    \
+                       "7:lbu\t$1, 6(%2)\n\t"              \
+                       "dsll\t%0, 0x8\n\t"                 \
+                       "or\t%0, $1\n\t"                    \
+                       "8:lbu\t$1, 7(%2)\n\t"              \
+                       "dsll\t%0, 0x8\n\t"                 \
+                       "or\t%0, $1\n\t"                    \
+                       "li\t%1, 0\n"                       \
+                       ".set\tpop\n\t"                     \
+                       "10:\n\t"                           \
+                       ".insn\n\t"                         \
+                       ".section\t.fixup,\"ax\"\n\t"       \
+                       "11:\tli\t%1, %3\n\t"               \
+                       "j\t10b\n\t"                        \
+                       ".previous\n\t"                     \
+                       ".section\t__ex_table,\"a\"\n\t"    \
+                       STR(PTR)"\t1b, 11b\n\t"             \
+                       STR(PTR)"\t2b, 11b\n\t"             \
+                       STR(PTR)"\t3b, 11b\n\t"             \
+                       STR(PTR)"\t4b, 11b\n\t"             \
+                       STR(PTR)"\t5b, 11b\n\t"             \
+                       STR(PTR)"\t6b, 11b\n\t"             \
+                       STR(PTR)"\t7b, 11b\n\t"             \
+                       STR(PTR)"\t8b, 11b\n\t"             \
+                       ".previous"                         \
+                       : "=&r" (value), "=r" (res)         \
+                       : "r" (addr), "i" (-EFAULT));       \
+} while(0)
+
+#endif /* CONFIG_CPU_MIPSR6 */
+
+
+#define     _StoreHW(addr, value, res, type) \
+do {                                                        \
+               __asm__ __volatile__ (                      \
+                       ".set\tnoat\n"                      \
+                       "1:\t"type##_sb("%1", "1(%2)")"\n"  \
+                       "srl\t$1, %1, 0x8\n"                \
+                       "2:\t"type##_sb("$1", "0(%2)")"\n"  \
+                       ".set\tat\n\t"                      \
+                       "li\t%0, 0\n"                       \
+                       "3:\n\t"                            \
+                       ".insn\n\t"                         \
+                       ".section\t.fixup,\"ax\"\n\t"       \
+                       "4:\tli\t%0, %3\n\t"                \
+                       "j\t3b\n\t"                         \
+                       ".previous\n\t"                     \
+                       ".section\t__ex_table,\"a\"\n\t"    \
+                       STR(PTR)"\t1b, 4b\n\t"              \
+                       STR(PTR)"\t2b, 4b\n\t"              \
+                       ".previous"                         \
+                       : "=r" (res)                        \
+                       : "r" (value), "r" (addr), "i" (-EFAULT));\
+} while(0)
+
+#ifndef CONFIG_CPU_MIPSR6
+#define     _StoreW(addr, value, res, type)  \
+do {                                                        \
+               __asm__ __volatile__ (                      \
+                       "1:\t"type##_swl("%1", "(%2)")"\n"  \
+                       "2:\t"type##_swr("%1", "3(%2)")"\n\t"\
+                       "li\t%0, 0\n"                       \
+                       "3:\n\t"                            \
+                       ".insn\n\t"                         \
+                       ".section\t.fixup,\"ax\"\n\t"       \
+                       "4:\tli\t%0, %3\n\t"                \
+                       "j\t3b\n\t"                         \
+                       ".previous\n\t"                     \
+                       ".section\t__ex_table,\"a\"\n\t"    \
+                       STR(PTR)"\t1b, 4b\n\t"              \
+                       STR(PTR)"\t2b, 4b\n\t"              \
+                       ".previous"                         \
+               : "=r" (res)                                \
+               : "r" (value), "r" (addr), "i" (-EFAULT));  \
+} while(0)
+
+#define     _StoreDW(addr, value, res) \
+do {                                                        \
+               __asm__ __volatile__ (                      \
+                       "1:\tsdl\t%1,(%2)\n"                \
+                       "2:\tsdr\t%1, 7(%2)\n\t"            \
+                       "li\t%0, 0\n"                       \
+                       "3:\n\t"                            \
+                       ".insn\n\t"                         \
+                       ".section\t.fixup,\"ax\"\n\t"       \
+                       "4:\tli\t%0, %3\n\t"                \
+                       "j\t3b\n\t"                         \
+                       ".previous\n\t"                     \
+                       ".section\t__ex_table,\"a\"\n\t"    \
+                       STR(PTR)"\t1b, 4b\n\t"              \
+                       STR(PTR)"\t2b, 4b\n\t"              \
+                       ".previous"                         \
+               : "=r" (res)                                \
+               : "r" (value), "r" (addr), "i" (-EFAULT));  \
+} while(0)
+
+#else
+/* MIPSR6 has no swl and sdl instructions */
+#define     _StoreW(addr, value, res, type)  \
+do {                                                        \
+               __asm__ __volatile__ (                      \
+                       ".set\tpush\n\t"                    \
+                       ".set\tnoat\n\t"                    \
+                       "1:"type##_sb("%1", "3(%2)")"\n\t"  \
+                       "srl\t$1, %1, 0x8\n\t"              \
+                       "2:"type##_sb("$1", "2(%2)")"\n\t"  \
+                       "srl\t$1, $1,  0x8\n\t"             \
+                       "3:"type##_sb("$1", "1(%2)")"\n\t"  \
+                       "srl\t$1, $1, 0x8\n\t"              \
+                       "4:"type##_sb("$1", "0(%2)")"\n\t"  \
+                       ".set\tpop\n\t"                     \
+                       "li\t%0, 0\n"                       \
+                       "10:\n\t"                           \
+                       ".insn\n\t"                         \
+                       ".section\t.fixup,\"ax\"\n\t"       \
+                       "11:\tli\t%0, %3\n\t"               \
+                       "j\t10b\n\t"                        \
+                       ".previous\n\t"                     \
+                       ".section\t__ex_table,\"a\"\n\t"    \
+                       STR(PTR)"\t1b, 11b\n\t"             \
+                       STR(PTR)"\t2b, 11b\n\t"             \
+                       STR(PTR)"\t3b, 11b\n\t"             \
+                       STR(PTR)"\t4b, 11b\n\t"             \
+                       ".previous"                         \
+               : "=&r" (res)                               \
+               : "r" (value), "r" (addr), "i" (-EFAULT)    \
+               : "memory");                                \
+} while(0)
+
+#define     StoreDW(addr, value, res) \
+do {                                                        \
+               __asm__ __volatile__ (                      \
+                       ".set\tpush\n\t"                    \
+                       ".set\tnoat\n\t"                    \
+                       "1:sb\t%1, 7(%2)\n\t"               \
+                       "dsrl\t$1, %1, 0x8\n\t"             \
+                       "2:sb\t$1, 6(%2)\n\t"               \
+                       "dsrl\t$1, $1, 0x8\n\t"             \
+                       "3:sb\t$1, 5(%2)\n\t"               \
+                       "dsrl\t$1, $1, 0x8\n\t"             \
+                       "4:sb\t$1, 4(%2)\n\t"               \
+                       "dsrl\t$1, $1, 0x8\n\t"             \
+                       "5:sb\t$1, 3(%2)\n\t"               \
+                       "dsrl\t$1, $1, 0x8\n\t"             \
+                       "6:sb\t$1, 2(%2)\n\t"               \
+                       "dsrl\t$1, $1, 0x8\n\t"             \
+                       "7:sb\t$1, 1(%2)\n\t"               \
+                       "dsrl\t$1, $1, 0x8\n\t"             \
+                       "8:sb\t$1, 0(%2)\n\t"               \
+                       "dsrl\t$1, $1, 0x8\n\t"             \
+                       ".set\tpop\n\t"                     \
+                       "li\t%0, 0\n"                       \
+                       "10:\n\t"                           \
+                       ".insn\n\t"                         \
+                       ".section\t.fixup,\"ax\"\n\t"       \
+                       "11:\tli\t%0, %3\n\t"               \
+                       "j\t10b\n\t"                        \
+                       ".previous\n\t"                     \
+                       ".section\t__ex_table,\"a\"\n\t"    \
+                       STR(PTR)"\t1b, 11b\n\t"             \
+                       STR(PTR)"\t2b, 11b\n\t"             \
+                       STR(PTR)"\t3b, 11b\n\t"             \
+                       STR(PTR)"\t4b, 11b\n\t"             \
+                       STR(PTR)"\t5b, 11b\n\t"             \
+                       STR(PTR)"\t6b, 11b\n\t"             \
+                       STR(PTR)"\t7b, 11b\n\t"             \
+                       STR(PTR)"\t8b, 11b\n\t"             \
+                       ".previous"                         \
+               : "=&r" (res)                               \
+               : "r" (value), "r" (addr), "i" (-EFAULT)    \
+               : "memory");                                \
+} while(0)
+
+#endif /* CONFIG_CPU_MIPSR6 */
+
+#else /* __BIG_ENDIAN */
+
+#define     _LoadHW(addr, value, res, type)  \
+do {                                                        \
+               __asm__ __volatile__ (".set\tnoat\n"        \
+                       "1:\t"type##_lb("%0", "1(%2)")"\n"  \
+                       "2:\t"type##_lbu("$1", "0(%2)")"\n\t"\
+                       "sll\t%0, 0x8\n\t"                  \
+                       "or\t%0, $1\n\t"                    \
+                       "li\t%1, 0\n"                       \
+                       "3:\t.set\tat\n\t"                  \
+                       ".insn\n\t"                         \
+                       ".section\t.fixup,\"ax\"\n\t"       \
+                       "4:\tli\t%1, %3\n\t"                \
+                       "j\t3b\n\t"                         \
+                       ".previous\n\t"                     \
+                       ".section\t__ex_table,\"a\"\n\t"    \
+                       STR(PTR)"\t1b, 4b\n\t"              \
+                       STR(PTR)"\t2b, 4b\n\t"              \
+                       ".previous"                         \
+                       : "=&r" (value), "=r" (res)         \
+                       : "r" (addr), "i" (-EFAULT));       \
+} while(0)
+
+#ifndef CONFIG_CPU_MIPSR6
+#define     _LoadW(addr, value, res, type)   \
+do {                                                        \
+               __asm__ __volatile__ (                      \
+                       "1:\t"type##_lwl("%0", "3(%2)")"\n" \
+                       "2:\t"type##_lwr("%0", "(%2)")"\n\t"\
+                       "li\t%1, 0\n"                       \
+                       "3:\n\t"                            \
+                       ".insn\n\t"                         \
+                       ".section\t.fixup,\"ax\"\n\t"       \
+                       "4:\tli\t%1, %3\n\t"                \
+                       "j\t3b\n\t"                         \
+                       ".previous\n\t"                     \
+                       ".section\t__ex_table,\"a\"\n\t"    \
+                       STR(PTR)"\t1b, 4b\n\t"              \
+                       STR(PTR)"\t2b, 4b\n\t"              \
+                       ".previous"                         \
+                       : "=&r" (value), "=r" (res)         \
+                       : "r" (addr), "i" (-EFAULT));       \
+} while(0)
+
+#else
+/* MIPSR6 has no lwl instruction */
+#define     _LoadW(addr, value, res, type) \
+do {                                                        \
+               __asm__ __volatile__ (                      \
+                       ".set\tpush\n"                      \
+                       ".set\tnoat\n\t"                    \
+                       "1:"type##_lb("%0", "3(%2)")"\n\t"  \
+                       "2:"type##_lbu("$1", "2(%2)")"\n\t" \
+                       "sll\t%0, 0x8\n\t"                  \
+                       "or\t%0, $1\n\t"                    \
+                       "3:"type##_lbu("$1", "1(%2)")"\n\t" \
+                       "sll\t%0, 0x8\n\t"                  \
+                       "or\t%0, $1\n\t"                    \
+                       "4:"type##_lbu("$1", "0(%2)")"\n\t" \
+                       "sll\t%0, 0x8\n\t"                  \
+                       "or\t%0, $1\n\t"                    \
+                       "li\t%1, 0\n"                       \
+                       ".set\tpop\n"                       \
+                       "10:\n\t"                           \
+                       ".insn\n\t"                         \
+                       ".section\t.fixup,\"ax\"\n\t"       \
+                       "11:\tli\t%1, %3\n\t"               \
+                       "j\t10b\n\t"                        \
+                       ".previous\n\t"                     \
+                       ".section\t__ex_table,\"a\"\n\t"    \
+                       STR(PTR)"\t1b, 11b\n\t"             \
+                       STR(PTR)"\t2b, 11b\n\t"             \
+                       STR(PTR)"\t3b, 11b\n\t"             \
+                       STR(PTR)"\t4b, 11b\n\t"             \
+                       ".previous"                         \
+                       : "=&r" (value), "=r" (res)         \
+                       : "r" (addr), "i" (-EFAULT));       \
+} while(0)
+
+#endif /* CONFIG_CPU_MIPSR6 */
+
+
+#define     _LoadHWU(addr, value, res, type) \
+do {                                                        \
+               __asm__ __volatile__ (                      \
+                       ".set\tnoat\n"                      \
+                       "1:\t"type##_lbu("%0", "1(%2)")"\n" \
+                       "2:\t"type##_lbu("$1", "0(%2)")"\n\t"\
+                       "sll\t%0, 0x8\n\t"                  \
+                       "or\t%0, $1\n\t"                    \
+                       "li\t%1, 0\n"                       \
+                       "3:\n\t"                            \
+                       ".insn\n\t"                         \
+                       ".set\tat\n\t"                      \
+                       ".section\t.fixup,\"ax\"\n\t"       \
+                       "4:\tli\t%1, %3\n\t"                \
+                       "j\t3b\n\t"                         \
+                       ".previous\n\t"                     \
+                       ".section\t__ex_table,\"a\"\n\t"    \
+                       STR(PTR)"\t1b, 4b\n\t"              \
+                       STR(PTR)"\t2b, 4b\n\t"              \
+                       ".previous"                         \
+                       : "=&r" (value), "=r" (res)         \
+                       : "r" (addr), "i" (-EFAULT));       \
+} while(0)
+
+#ifndef CONFIG_CPU_MIPSR6
+#define     _LoadWU(addr, value, res, type)  \
+do {                                                        \
+               __asm__ __volatile__ (                      \
+                       "1:\t"type##_lwl("%0", "3(%2)")"\n" \
+                       "2:\t"type##_lwr("%0", "(%2)")"\n\t"\
+                       "dsll\t%0, %0, 32\n\t"              \
+                       "dsrl\t%0, %0, 32\n\t"              \
+                       "li\t%1, 0\n"                       \
+                       "3:\n\t"                            \
+                       ".insn\n\t"                         \
+                       "\t.section\t.fixup,\"ax\"\n\t"     \
+                       "4:\tli\t%1, %3\n\t"                \
+                       "j\t3b\n\t"                         \
+                       ".previous\n\t"                     \
+                       ".section\t__ex_table,\"a\"\n\t"    \
+                       STR(PTR)"\t1b, 4b\n\t"              \
+                       STR(PTR)"\t2b, 4b\n\t"              \
+                       ".previous"                         \
+                       : "=&r" (value), "=r" (res)         \
+                       : "r" (addr), "i" (-EFAULT));       \
+} while(0)
+
+#define     _LoadDW(addr, value, res)  \
+do {                                                        \
+               __asm__ __volatile__ (                      \
+                       "1:\tldl\t%0, 7(%2)\n"              \
+                       "2:\tldr\t%0, (%2)\n\t"             \
+                       "li\t%1, 0\n"                       \
+                       "3:\n\t"                            \
+                       ".insn\n\t"                         \
+                       "\t.section\t.fixup,\"ax\"\n\t"     \
+                       "4:\tli\t%1, %3\n\t"                \
+                       "j\t3b\n\t"                         \
+                       ".previous\n\t"                     \
+                       ".section\t__ex_table,\"a\"\n\t"    \
+                       STR(PTR)"\t1b, 4b\n\t"              \
+                       STR(PTR)"\t2b, 4b\n\t"              \
+                       ".previous"                         \
+                       : "=&r" (value), "=r" (res)         \
+                       : "r" (addr), "i" (-EFAULT));       \
+} while(0)
+
+#else
+/* MIPSR6 has not lwl and ldl instructions */
+#define            _LoadWU(addr, value, res, type) \
+do {                                                        \
+               __asm__ __volatile__ (                      \
+                       ".set\tpush\n\t"                    \
+                       ".set\tnoat\n\t"                    \
+                       "1:"type##_lbu("%0", "3(%2)")"\n\t" \
+                       "2:"type##_lbu("$1", "2(%2)")"\n\t" \
+                       "sll\t%0, 0x8\n\t"                  \
+                       "or\t%0, $1\n\t"                    \
+                       "3:"type##_lbu("$1", "1(%2)")"\n\t" \
+                       "sll\t%0, 0x8\n\t"                  \
+                       "or\t%0, $1\n\t"                    \
+                       "4:"type##_lbu("$1", "0(%2)")"\n\t" \
+                       "sll\t%0, 0x8\n\t"                  \
+                       "or\t%0, $1\n\t"                    \
+                       "li\t%1, 0\n"                       \
+                       ".set\tpop\n"                       \
+                       "10:\n\t"                           \
+                       ".insn\n\t"                         \
+                       ".section\t.fixup,\"ax\"\n\t"       \
+                       "11:\tli\t%1, %3\n\t"               \
+                       "j\t10b\n\t"                        \
+                       ".previous\n\t"                     \
+                       ".section\t__ex_table,\"a\"\n\t"    \
+                       STR(PTR)"\t1b, 11b\n\t"             \
+                       STR(PTR)"\t2b, 11b\n\t"             \
+                       STR(PTR)"\t3b, 11b\n\t"             \
+                       STR(PTR)"\t4b, 11b\n\t"             \
+                       ".previous"                         \
+                       : "=&r" (value), "=r" (res)         \
+                       : "r" (addr), "i" (-EFAULT));       \
+} while(0)
+
+#define     _LoadDW(addr, value, res)  \
+do {                                                        \
+               __asm__ __volatile__ (                      \
+                       ".set\tpush\n\t"                    \
+                       ".set\tnoat\n\t"                    \
+                       "1:lb\t%0, 7(%2)\n\t"               \
+                       "2:lbu\t$1, 6(%2)\n\t"              \
+                       "dsll\t%0, 0x8\n\t"                 \
+                       "or\t%0, $1\n\t"                    \
+                       "3:lbu\t$1, 5(%2)\n\t"              \
+                       "dsll\t%0, 0x8\n\t"                 \
+                       "or\t%0, $1\n\t"                    \
+                       "4:lbu\t$1, 4(%2)\n\t"              \
+                       "dsll\t%0, 0x8\n\t"                 \
+                       "or\t%0, $1\n\t"                    \
+                       "5:lbu\t$1, 3(%2)\n\t"              \
+                       "dsll\t%0, 0x8\n\t"                 \
+                       "or\t%0, $1\n\t"                    \
+                       "6:lbu\t$1, 2(%2)\n\t"              \
+                       "dsll\t%0, 0x8\n\t"                 \
+                       "or\t%0, $1\n\t"                    \
+                       "7:lbu\t$1, 1(%2)\n\t"              \
+                       "dsll\t%0, 0x8\n\t"                 \
+                       "or\t%0, $1\n\t"                    \
+                       "8:lbu\t$1, 0(%2)\n\t"              \
+                       "dsll\t%0, 0x8\n\t"                 \
+                       "or\t%0, $1\n\t"                    \
+                       "li\t%1, 0\n"                       \
+                       ".set\tpop\n\t"                     \
+                       "10:\n\t"                           \
+                       ".insn\n\t"                         \
+                       ".section\t.fixup,\"ax\"\n\t"       \
+                       "11:\tli\t%1, %3\n\t"               \
+                       "j\t10b\n\t"                        \
+                       ".previous\n\t"                     \
+                       ".section\t__ex_table,\"a\"\n\t"    \
+                       STR(PTR)"\t1b, 11b\n\t"             \
+                       STR(PTR)"\t2b, 11b\n\t"             \
+                       STR(PTR)"\t3b, 11b\n\t"             \
+                       STR(PTR)"\t4b, 11b\n\t"             \
+                       STR(PTR)"\t5b, 11b\n\t"             \
+                       STR(PTR)"\t6b, 11b\n\t"             \
+                       STR(PTR)"\t7b, 11b\n\t"             \
+                       STR(PTR)"\t8b, 11b\n\t"             \
+                       ".previous"                         \
+                       : "=&r" (value), "=r" (res)         \
+                       : "r" (addr), "i" (-EFAULT));       \
+} while(0)
+#endif /* CONFIG_CPU_MIPSR6 */
+
+#define     _StoreHW(addr, value, res, type) \
+do {                                                        \
+               __asm__ __volatile__ (                      \
+                       ".set\tnoat\n"                      \
+                       "1:\t"type##_sb("%1", "0(%2)")"\n"  \
+                       "srl\t$1,%1, 0x8\n"                 \
+                       "2:\t"type##_sb("$1", "1(%2)")"\n"  \
+                       ".set\tat\n\t"                      \
+                       "li\t%0, 0\n"                       \
+                       "3:\n\t"                            \
+                       ".insn\n\t"                         \
+                       ".section\t.fixup,\"ax\"\n\t"       \
+                       "4:\tli\t%0, %3\n\t"                \
+                       "j\t3b\n\t"                         \
+                       ".previous\n\t"                     \
+                       ".section\t__ex_table,\"a\"\n\t"    \
+                       STR(PTR)"\t1b, 4b\n\t"              \
+                       STR(PTR)"\t2b, 4b\n\t"              \
+                       ".previous"                         \
+                       : "=r" (res)                        \
+                       : "r" (value), "r" (addr), "i" (-EFAULT));\
+} while(0)
+
+#ifndef CONFIG_CPU_MIPSR6
+#define     _StoreW(addr, value, res, type)  \
+do {                                                        \
+               __asm__ __volatile__ (                      \
+                       "1:\t"type##_swl("%1", "3(%2)")"\n" \
+                       "2:\t"type##_swr("%1", "(%2)")"\n\t"\
+                       "li\t%0, 0\n"                       \
+                       "3:\n\t"                            \
+                       ".insn\n\t"                         \
+                       ".section\t.fixup,\"ax\"\n\t"       \
+                       "4:\tli\t%0, %3\n\t"                \
+                       "j\t3b\n\t"                         \
+                       ".previous\n\t"                     \
+                       ".section\t__ex_table,\"a\"\n\t"    \
+                       STR(PTR)"\t1b, 4b\n\t"              \
+                       STR(PTR)"\t2b, 4b\n\t"              \
+                       ".previous"                         \
+               : "=r" (res)                                \
+               : "r" (value), "r" (addr), "i" (-EFAULT));  \
+} while(0)
+
+#define     _StoreDW(addr, value, res) \
+do {                                                        \
+               __asm__ __volatile__ (                      \
+                       "1:\tsdl\t%1, 7(%2)\n"              \
+                       "2:\tsdr\t%1, (%2)\n\t"             \
+                       "li\t%0, 0\n"                       \
+                       "3:\n\t"                            \
+                       ".insn\n\t"                         \
+                       ".section\t.fixup,\"ax\"\n\t"       \
+                       "4:\tli\t%0, %3\n\t"                \
+                       "j\t3b\n\t"                         \
+                       ".previous\n\t"                     \
+                       ".section\t__ex_table,\"a\"\n\t"    \
+                       STR(PTR)"\t1b, 4b\n\t"              \
+                       STR(PTR)"\t2b, 4b\n\t"              \
+                       ".previous"                         \
+               : "=r" (res)                                \
+               : "r" (value), "r" (addr), "i" (-EFAULT));  \
+} while(0)
+
+#else
+/* MIPSR6 has no swl and sdl instructions */
+#define     _StoreW(addr, value, res, type)  \
+do {                                                        \
+               __asm__ __volatile__ (                      \
+                       ".set\tpush\n\t"                    \
+                       ".set\tnoat\n\t"                    \
+                       "1:"type##_sb("%1", "0(%2)")"\n\t"  \
+                       "srl\t$1, %1, 0x8\n\t"              \
+                       "2:"type##_sb("$1", "1(%2)")"\n\t"  \
+                       "srl\t$1, $1,  0x8\n\t"             \
+                       "3:"type##_sb("$1", "2(%2)")"\n\t"  \
+                       "srl\t$1, $1, 0x8\n\t"              \
+                       "4:"type##_sb("$1", "3(%2)")"\n\t"  \
+                       ".set\tpop\n\t"                     \
+                       "li\t%0, 0\n"                       \
+                       "10:\n\t"                           \
+                       ".insn\n\t"                         \
+                       ".section\t.fixup,\"ax\"\n\t"       \
+                       "11:\tli\t%0, %3\n\t"               \
+                       "j\t10b\n\t"                        \
+                       ".previous\n\t"                     \
+                       ".section\t__ex_table,\"a\"\n\t"    \
+                       STR(PTR)"\t1b, 11b\n\t"             \
+                       STR(PTR)"\t2b, 11b\n\t"             \
+                       STR(PTR)"\t3b, 11b\n\t"             \
+                       STR(PTR)"\t4b, 11b\n\t"             \
+                       ".previous"                         \
+               : "=&r" (res)                               \
+               : "r" (value), "r" (addr), "i" (-EFAULT)    \
+               : "memory");                                \
+} while(0)
+
+#define     _StoreDW(addr, value, res) \
+do {                                                        \
+               __asm__ __volatile__ (                      \
+                       ".set\tpush\n\t"                    \
+                       ".set\tnoat\n\t"                    \
+                       "1:sb\t%1, 0(%2)\n\t"               \
+                       "dsrl\t$1, %1, 0x8\n\t"             \
+                       "2:sb\t$1, 1(%2)\n\t"               \
+                       "dsrl\t$1, $1, 0x8\n\t"             \
+                       "3:sb\t$1, 2(%2)\n\t"               \
+                       "dsrl\t$1, $1, 0x8\n\t"             \
+                       "4:sb\t$1, 3(%2)\n\t"               \
+                       "dsrl\t$1, $1, 0x8\n\t"             \
+                       "5:sb\t$1, 4(%2)\n\t"               \
+                       "dsrl\t$1, $1, 0x8\n\t"             \
+                       "6:sb\t$1, 5(%2)\n\t"               \
+                       "dsrl\t$1, $1, 0x8\n\t"             \
+                       "7:sb\t$1, 6(%2)\n\t"               \
+                       "dsrl\t$1, $1, 0x8\n\t"             \
+                       "8:sb\t$1, 7(%2)\n\t"               \
+                       "dsrl\t$1, $1, 0x8\n\t"             \
+                       ".set\tpop\n\t"                     \
+                       "li\t%0, 0\n"                       \
+                       "10:\n\t"                           \
+                       ".insn\n\t"                         \
+                       ".section\t.fixup,\"ax\"\n\t"       \
+                       "11:\tli\t%0, %3\n\t"               \
+                       "j\t10b\n\t"                        \
+                       ".previous\n\t"                     \
+                       ".section\t__ex_table,\"a\"\n\t"    \
+                       STR(PTR)"\t1b, 11b\n\t"             \
+                       STR(PTR)"\t2b, 11b\n\t"             \
+                       STR(PTR)"\t3b, 11b\n\t"             \
+                       STR(PTR)"\t4b, 11b\n\t"             \
+                       STR(PTR)"\t5b, 11b\n\t"             \
+                       STR(PTR)"\t6b, 11b\n\t"             \
+                       STR(PTR)"\t7b, 11b\n\t"             \
+                       STR(PTR)"\t8b, 11b\n\t"             \
+                       ".previous"                         \
+               : "=&r" (res)                               \
+               : "r" (value), "r" (addr), "i" (-EFAULT)    \
+               : "memory");                                \
+} while(0)
+
+#endif /* CONFIG_CPU_MIPSR6 */
+#endif
+
+#define LoadHWU(addr, value, res)      _LoadHWU(addr, value, res, kernel)
+#define LoadHWUE(addr, value, res)     _LoadHWU(addr, value, res, user)
+#define LoadWU(addr, value, res)       _LoadWU(addr, value, res, kernel)
+#define LoadWUE(addr, value, res)      _LoadWU(addr, value, res, user)
+#define LoadHW(addr, value, res)       _LoadHW(addr, value, res, kernel)
+#define LoadHWE(addr, value, res)      _LoadHW(addr, value, res, user)
+#define LoadW(addr, value, res)                _LoadW(addr, value, res, kernel)
+#define LoadWE(addr, value, res)       _LoadW(addr, value, res, user)
+#define LoadDW(addr, value, res)       _LoadDW(addr, value, res)
+
+#define StoreHW(addr, value, res)      _StoreHW(addr, value, res, kernel)
+#define StoreHWE(addr, value, res)     _StoreHW(addr, value, res, user)
+#define StoreW(addr, value, res)       _StoreW(addr, value, res, kernel)
+#define StoreWE(addr, value, res)      _StoreW(addr, value, res, user)
+#define StoreDW(addr, value, res)      _StoreDW(addr, value, res)
+
+static void emulate_load_store_insn(struct pt_regs *regs,
+       void __user *addr, unsigned int __user *pc)
+{
+       union mips_instruction insn;
+       unsigned long value;
+       unsigned int res;
+       unsigned long origpc;
+       unsigned long orig31;
+       void __user *fault_addr = NULL;
+#ifdef CONFIG_EVA
+       mm_segment_t seg;
+#endif
+       origpc = (unsigned long)pc;
+       orig31 = regs->regs[31];
+
+       perf_sw_event(PERF_COUNT_SW_EMULATION_FAULTS, 1, regs, 0);
+
+       /*
+        * This load never faults.
+        */
+       __get_user(insn.word, pc);
+
+       switch (insn.i_format.opcode) {
+               /*
+                * These are instructions that a compiler doesn't generate.  We
+                * can assume therefore that the code is MIPS-aware and
+                * really buggy.  Emulating these instructions would break the
+                * semantics anyway.
+                */
+       case ll_op:
+       case lld_op:
+       case sc_op:
+       case scd_op:
+
+               /*
+                * For these instructions the only way to create an address
+                * error is an attempted access to kernel/supervisor address
+                * space.
+                */
+       case ldl_op:
+       case ldr_op:
+       case lwl_op:
+       case lwr_op:
+       case sdl_op:
+       case sdr_op:
+       case swl_op:
+       case swr_op:
+       case lb_op:
+       case lbu_op:
+       case sb_op:
+               goto sigbus;
+
+               /*
+                * The remaining opcodes are the ones that are really of
+                * interest.
+                */
+#ifdef CONFIG_EVA
+       case spec3_op:
+               /*
+                * we can land here only from kernel accessing user memory,
+                * so we need to "switch" the address limit to user space, so
+                * address check can work properly.
+                */
+               seg = get_fs();
+               set_fs(USER_DS);
+               switch (insn.spec3_format.func) {
+               case lhe_op:
+                       if (!access_ok(VERIFY_READ, addr, 2)) {
+                               set_fs(seg);
+                               goto sigbus;
+                       }
+                       LoadHWE(addr, value, res);
+                       if (res) {
+                               set_fs(seg);
+                               goto fault;
+                       }
+                       compute_return_epc(regs);
+                       regs->regs[insn.spec3_format.rt] = value;
+                       break;
+               case lwe_op:
+                       if (!access_ok(VERIFY_READ, addr, 4)) {
+                               set_fs(seg);
+                               goto sigbus;
+                       }
+                               LoadWE(addr, value, res);
+                       if (res) {
+                               set_fs(seg);
+                               goto fault;
+                       }
+                       compute_return_epc(regs);
+                       regs->regs[insn.spec3_format.rt] = value;
+                       break;
+               case lhue_op:
+                       if (!access_ok(VERIFY_READ, addr, 2)) {
+                               set_fs(seg);
+                               goto sigbus;
+                       }
+                       LoadHWUE(addr, value, res);
+                       if (res) {
+                               set_fs(seg);
+                               goto fault;
+                       }
+                       compute_return_epc(regs);
+                       regs->regs[insn.spec3_format.rt] = value;
+                       break;
+               case she_op:
+                       if (!access_ok(VERIFY_WRITE, addr, 2)) {
+                               set_fs(seg);
+                               goto sigbus;
+                       }
+                       compute_return_epc(regs);
+                       value = regs->regs[insn.spec3_format.rt];
+                       StoreHWE(addr, value, res);
+                       if (res) {
+                               set_fs(seg);
+                               goto fault;
+                       }
+                       break;
+               case swe_op:
+                       if (!access_ok(VERIFY_WRITE, addr, 4)) {
+                               set_fs(seg);
+                               goto sigbus;
+                       }
+                       compute_return_epc(regs);
+                       value = regs->regs[insn.spec3_format.rt];
+                       StoreWE(addr, value, res);
+                       if (res) {
+                               set_fs(seg);
+                               goto fault;
+                       }
+                       break;
+               default:
+                       set_fs(seg);
+                       goto sigill;
+               }
+               set_fs(seg);
+               break;
+#endif
+       case lh_op:
+               if (!access_ok(VERIFY_READ, addr, 2))
+                       goto sigbus;
+
+               if (config_enabled(CONFIG_EVA)) {
+                       if (segment_eq(get_fs(), get_ds()))
+                               LoadHW(addr, value, res);
+                       else
+                               LoadHWE(addr, value, res);
+               } else {
+                       LoadHW(addr, value, res);
+               }
+
+               if (res)
+                       goto fault;
+               compute_return_epc(regs);
+               regs->regs[insn.i_format.rt] = value;
+               break;
+
+       case lw_op:
+               if (!access_ok(VERIFY_READ, addr, 4))
+                       goto sigbus;
+
+               if (config_enabled(CONFIG_EVA)) {
+                       if (segment_eq(get_fs(), get_ds()))
+                               LoadW(addr, value, res);
+                       else
+                               LoadWE(addr, value, res);
+               } else {
+                       LoadW(addr, value, res);
+               }
+
+               if (res)
+                       goto fault;
+               compute_return_epc(regs);
+               regs->regs[insn.i_format.rt] = value;
+               break;
+
+       case lhu_op:
+               if (!access_ok(VERIFY_READ, addr, 2))
+                       goto sigbus;
+
+               if (config_enabled(CONFIG_EVA)) {
+                       if (segment_eq(get_fs(), get_ds()))
+                               LoadHWU(addr, value, res);
+                       else
+                               LoadHWUE(addr, value, res);
+               } else {
+                       LoadHWU(addr, value, res);
+               }
+
+               if (res)
+                       goto fault;
+               compute_return_epc(regs);
+               regs->regs[insn.i_format.rt] = value;
+               break;
+
+       case lwu_op:
+#ifdef CONFIG_64BIT
+               /*
+                * A 32-bit kernel might be running on a 64-bit processor.  But
+                * if we're on a 32-bit processor and an i-cache incoherency
+                * or race makes us see a 64-bit instruction here the sdl/sdr
+                * would blow up, so for now we don't handle unaligned 64-bit
+                * instructions on 32-bit kernels.
+                */
+               if (!access_ok(VERIFY_READ, addr, 4))
+                       goto sigbus;
+
+               LoadWU(addr, value, res);
+               if (res)
+                       goto fault;
+               compute_return_epc(regs);
+               regs->regs[insn.i_format.rt] = value;
+               break;
+#endif /* CONFIG_64BIT */
+
+               /* Cannot handle 64-bit instructions in 32-bit kernel */
+               goto sigill;
+
+       case ld_op:
+#ifdef CONFIG_64BIT
+               /*
+                * A 32-bit kernel might be running on a 64-bit processor.  But
+                * if we're on a 32-bit processor and an i-cache incoherency
+                * or race makes us see a 64-bit instruction here the sdl/sdr
+                * would blow up, so for now we don't handle unaligned 64-bit
+                * instructions on 32-bit kernels.
+                */
+               if (!access_ok(VERIFY_READ, addr, 8))
+                       goto sigbus;
+
+               LoadDW(addr, value, res);
+               if (res)
+                       goto fault;
+               compute_return_epc(regs);
+               regs->regs[insn.i_format.rt] = value;
+               break;
+#endif /* CONFIG_64BIT */
+
+               /* Cannot handle 64-bit instructions in 32-bit kernel */
+               goto sigill;
+
+       case sh_op:
+               if (!access_ok(VERIFY_WRITE, addr, 2))
+                       goto sigbus;
+
+               compute_return_epc(regs);
+               value = regs->regs[insn.i_format.rt];
+
+               if (config_enabled(CONFIG_EVA)) {
+                       if (segment_eq(get_fs(), get_ds()))
+                               StoreHW(addr, value, res);
+                       else
+                               StoreHWE(addr, value, res);
+               } else {
+                       StoreHW(addr, value, res);
+               }
+
+               if (res)
+                       goto fault;
+               break;
+
+       case sw_op:
+               if (!access_ok(VERIFY_WRITE, addr, 4))
+                       goto sigbus;
+
+               compute_return_epc(regs);
+               value = regs->regs[insn.i_format.rt];
+
+               if (config_enabled(CONFIG_EVA)) {
+                       if (segment_eq(get_fs(), get_ds()))
+                               StoreW(addr, value, res);
+                       else
+                               StoreWE(addr, value, res);
+               } else {
+                       StoreW(addr, value, res);
+               }
+
+               if (res)
+                       goto fault;
+               break;
+
+       case sd_op:
+#ifdef CONFIG_64BIT
+               /*
+                * A 32-bit kernel might be running on a 64-bit processor.  But
+                * if we're on a 32-bit processor and an i-cache incoherency
+                * or race makes us see a 64-bit instruction here the sdl/sdr
+                * would blow up, so for now we don't handle unaligned 64-bit
+                * instructions on 32-bit kernels.
+                */
+               if (!access_ok(VERIFY_WRITE, addr, 8))
+                       goto sigbus;
+
+               compute_return_epc(regs);
+               value = regs->regs[insn.i_format.rt];
+               StoreDW(addr, value, res);
+               if (res)
+                       goto fault;
+               break;
+#endif /* CONFIG_64BIT */
+
+               /* Cannot handle 64-bit instructions in 32-bit kernel */
+               goto sigill;
+
+       case lwc1_op:
+       case ldc1_op:
+       case swc1_op:
+       case sdc1_op:
+               die_if_kernel("Unaligned FP access in kernel code", regs);
+               BUG_ON(!used_math());
+
+               lose_fpu(1);    /* Save FPU state for the emulator. */
+               res = fpu_emulator_cop1Handler(regs, &current->thread.fpu, 1,
+                                              &fault_addr);
+               own_fpu(1);     /* Restore FPU state. */
+
+               /* Signal if something went wrong. */
+               process_fpemu_return(res, fault_addr, 0);
+
+               if (res == 0)
+                       break;
+               return;
+
+#ifndef CONFIG_CPU_MIPSR6
+       /*
+        * COP2 is available to implementor for application specific use.
+        * It's up to applications to register a notifier chain and do
+        * whatever they have to do, including possible sending of signals.
+        *
+        * This instruction has been reallocated in Release 6
+        */
+       case lwc2_op:
+               cu2_notifier_call_chain(CU2_LWC2_OP, regs);
+               break;
+
+       case ldc2_op:
+               cu2_notifier_call_chain(CU2_LDC2_OP, regs);
+               break;
+
+       case swc2_op:
+               cu2_notifier_call_chain(CU2_SWC2_OP, regs);
+               break;
+
+       case sdc2_op:
+               cu2_notifier_call_chain(CU2_SDC2_OP, regs);
+               break;
+#endif
+       default:
+               /*
+                * Pheeee...  We encountered an yet unknown instruction or
+                * cache coherence problem.  Die sucker, die ...
+                */
+               goto sigill;
+       }
+
+#ifdef CONFIG_DEBUG_FS
+       unaligned_instructions++;
+#endif
+
+       return;
+
+fault:
+       /* roll back jump/branch */
+       regs->cp0_epc = origpc;
+       regs->regs[31] = orig31;
+       /* Did we have an exception handler installed? */
+       if (fixup_exception(regs))
+               return;
+
+       die_if_kernel("Unhandled kernel unaligned access", regs);
+       force_sig(SIGSEGV, current);
+
+       return;
+
+sigbus:
+       die_if_kernel("Unhandled kernel unaligned access", regs);
+       force_sig(SIGBUS, current);
+
+       return;
+
+sigill:
+       die_if_kernel
+           ("Unhandled kernel unaligned access or invalid instruction", regs);
+       force_sig(SIGILL, current);
+}
+
+/* Recode table from 16-bit register notation to 32-bit GPR. */
+const int reg16to32[] = { 16, 17, 2, 3, 4, 5, 6, 7 };
+
+/* Recode table from 16-bit STORE register notation to 32-bit GPR. */
+const int reg16to32st[] = { 0, 17, 2, 3, 4, 5, 6, 7 };
+
+static void emulate_load_store_microMIPS(struct pt_regs *regs,
+                                        void __user *addr)
+{
+       unsigned long value;
+       unsigned int res;
+       int i;
+       unsigned int reg = 0, rvar;
+       unsigned long orig31;
+       u16 __user *pc16;
+       u16 halfword;
+       unsigned int word;
+       unsigned long origpc, contpc;
+       union mips_instruction insn;
+       struct mm_decoded_insn mminsn;
+       void __user *fault_addr = NULL;
+
+       origpc = regs->cp0_epc;
+       orig31 = regs->regs[31];
+
+       mminsn.micro_mips_mode = 1;
+
+       /*
+        * This load never faults.
+        */
+       pc16 = (unsigned short __user *)msk_isa16_mode(regs->cp0_epc);
+       __get_user(halfword, pc16);
+       pc16++;
+       contpc = regs->cp0_epc + 2;
+       word = ((unsigned int)halfword << 16);
+       mminsn.pc_inc = 2;
+
+       if (!mm_insn_16bit(halfword)) {
+               __get_user(halfword, pc16);
+               pc16++;
+               contpc = regs->cp0_epc + 4;
+               mminsn.pc_inc = 4;
+               word |= halfword;
+       }
+       mminsn.insn = word;
+
+       if (get_user(halfword, pc16))
+               goto fault;
+       mminsn.next_pc_inc = 2;
+       word = ((unsigned int)halfword << 16);
+
+       if (!mm_insn_16bit(halfword)) {
+               pc16++;
+               if (get_user(halfword, pc16))
+                       goto fault;
+               mminsn.next_pc_inc = 4;
+               word |= halfword;
+       }
+       mminsn.next_insn = word;
+
+       insn = (union mips_instruction)(mminsn.insn);
+       if (mm_isBranchInstr(regs, mminsn, &contpc))
+               insn = (union mips_instruction)(mminsn.next_insn);
+
+       /*  Parse instruction to find what to do */
+
+       switch (insn.mm_i_format.opcode) {
+
+       case mm_pool32a_op:
+               switch (insn.mm_x_format.func) {
+               case mm_lwxs_op:
+                       reg = insn.mm_x_format.rd;
+                       goto loadW;
+               }
+
+               goto sigbus;
+
+       case mm_pool32b_op:
+               switch (insn.mm_m_format.func) {
+               case mm_lwp_func:
+                       reg = insn.mm_m_format.rd;
+                       if (reg == 31)
+                               goto sigbus;
+
+                       if (!access_ok(VERIFY_READ, addr, 8))
+                               goto sigbus;
+
+                       LoadW(addr, value, res);
+                       if (res)
+                               goto fault;
+                       regs->regs[reg] = value;
+                       addr += 4;
+                       LoadW(addr, value, res);
+                       if (res)
+                               goto fault;
+                       regs->regs[reg + 1] = value;
+                       goto success;
+
+               case mm_swp_func:
+                       reg = insn.mm_m_format.rd;
+                       if (reg == 31)
+                               goto sigbus;
+
+                       if (!access_ok(VERIFY_WRITE, addr, 8))
+                               goto sigbus;
+
+                       value = regs->regs[reg];
+                       StoreW(addr, value, res);
+                       if (res)
+                               goto fault;
+                       addr += 4;
+                       value = regs->regs[reg + 1];
+                       StoreW(addr, value, res);
+                       if (res)
+                               goto fault;
+                       goto success;
+
+               case mm_ldp_func:
+#ifdef CONFIG_64BIT
+                       reg = insn.mm_m_format.rd;
+                       if (reg == 31)
+                               goto sigbus;
+
+                       if (!access_ok(VERIFY_READ, addr, 16))
+                               goto sigbus;
+
+                       LoadDW(addr, value, res);
+                       if (res)
+                               goto fault;
+                       regs->regs[reg] = value;
+                       addr += 8;
+                       LoadDW(addr, value, res);
+                       if (res)
+                               goto fault;
+                       regs->regs[reg + 1] = value;
+                       goto success;
+#endif /* CONFIG_64BIT */
+
+                       goto sigill;
+
+               case mm_sdp_func:
+#ifdef CONFIG_64BIT
+                       reg = insn.mm_m_format.rd;
+                       if (reg == 31)
+                               goto sigbus;
+
+                       if (!access_ok(VERIFY_WRITE, addr, 16))
+                               goto sigbus;
+
+                       value = regs->regs[reg];
+                       StoreDW(addr, value, res);
+                       if (res)
+                               goto fault;
+                       addr += 8;
+                       value = regs->regs[reg + 1];
+                       StoreDW(addr, value, res);
+                       if (res)
+                               goto fault;
+                       goto success;
+#endif /* CONFIG_64BIT */
+
+                       goto sigill;
+
+               case mm_lwm32_func:
+                       reg = insn.mm_m_format.rd;
+                       rvar = reg & 0xf;
+                       if ((rvar > 9) || !reg)
+                               goto sigill;
+                       if (reg & 0x10) {
+                               if (!access_ok
+                                   (VERIFY_READ, addr, 4 * (rvar + 1)))
+                                       goto sigbus;
+                       } else {
+                               if (!access_ok(VERIFY_READ, addr, 4 * rvar))
+                                       goto sigbus;
+                       }
+                       if (rvar == 9)
+                               rvar = 8;
+                       for (i = 16; rvar; rvar--, i++) {
+                               LoadW(addr, value, res);
+                               if (res)
+                                       goto fault;
+                               addr += 4;
+                               regs->regs[i] = value;
+                       }
+                       if ((reg & 0xf) == 9) {
+                               LoadW(addr, value, res);
+                               if (res)
+                                       goto fault;
+                               addr += 4;
+                               regs->regs[30] = value;
+                       }
+                       if (reg & 0x10) {
+                               LoadW(addr, value, res);
+                               if (res)
+                                       goto fault;
+                               regs->regs[31] = value;
+                       }
+                       goto success;
+
+               case mm_swm32_func:
+                       reg = insn.mm_m_format.rd;
+                       rvar = reg & 0xf;
+                       if ((rvar > 9) || !reg)
+                               goto sigill;
+                       if (reg & 0x10) {
+                               if (!access_ok
+                                   (VERIFY_WRITE, addr, 4 * (rvar + 1)))
+                                       goto sigbus;
+                       } else {
+                               if (!access_ok(VERIFY_WRITE, addr, 4 * rvar))
+                                       goto sigbus;
+                       }
+                       if (rvar == 9)
+                               rvar = 8;
+                       for (i = 16; rvar; rvar--, i++) {
+                               value = regs->regs[i];
+                               StoreW(addr, value, res);
+                               if (res)
+                                       goto fault;
+                               addr += 4;
+                       }
+                       if ((reg & 0xf) == 9) {
+                               value = regs->regs[30];
+                               StoreW(addr, value, res);
+                               if (res)
+                                       goto fault;
+                               addr += 4;
+                       }
+                       if (reg & 0x10) {
+                               value = regs->regs[31];
+                               StoreW(addr, value, res);
+                               if (res)
+                                       goto fault;
+                       }
+                       goto success;
+
+               case mm_ldm_func:
+#ifdef CONFIG_64BIT
+                       reg = insn.mm_m_format.rd;
+                       rvar = reg & 0xf;
+                       if ((rvar > 9) || !reg)
+                               goto sigill;
+                       if (reg & 0x10) {
+                               if (!access_ok
+                                   (VERIFY_READ, addr, 8 * (rvar + 1)))
+                                       goto sigbus;
+                       } else {
+                               if (!access_ok(VERIFY_READ, addr, 8 * rvar))
+                                       goto sigbus;
+                       }
+                       if (rvar == 9)
+                               rvar = 8;
+
+                       for (i = 16; rvar; rvar--, i++) {
+                               LoadDW(addr, value, res);
+                               if (res)
+                                       goto fault;
+                               addr += 4;
+                               regs->regs[i] = value;
+                       }
+                       if ((reg & 0xf) == 9) {
+                               LoadDW(addr, value, res);
+                               if (res)
+                                       goto fault;
+                               addr += 8;
+                               regs->regs[30] = value;
+                       }
+                       if (reg & 0x10) {
+                               LoadDW(addr, value, res);
+                               if (res)
+                                       goto fault;
+                               regs->regs[31] = value;
+                       }
+                       goto success;
+#endif /* CONFIG_64BIT */
+
+                       goto sigill;
+
+               case mm_sdm_func:
+#ifdef CONFIG_64BIT
+                       reg = insn.mm_m_format.rd;
+                       rvar = reg & 0xf;
+                       if ((rvar > 9) || !reg)
+                               goto sigill;
+                       if (reg & 0x10) {
+                               if (!access_ok
+                                   (VERIFY_WRITE, addr, 8 * (rvar + 1)))
+                                       goto sigbus;
+                       } else {
+                               if (!access_ok(VERIFY_WRITE, addr, 8 * rvar))
+                                       goto sigbus;
+                       }
+                       if (rvar == 9)
+                               rvar = 8;
+
+                       for (i = 16; rvar; rvar--, i++) {
+                               value = regs->regs[i];
+                               StoreDW(addr, value, res);
+                               if (res)
+                                       goto fault;
+                               addr += 8;
+                       }
+                       if ((reg & 0xf) == 9) {
+                               value = regs->regs[30];
+                               StoreDW(addr, value, res);
+                               if (res)
+                                       goto fault;
+                               addr += 8;
+                       }
+                       if (reg & 0x10) {
+                               value = regs->regs[31];
+                               StoreDW(addr, value, res);
+                               if (res)
+                                       goto fault;
+                       }
+                       goto success;
+#endif /* CONFIG_64BIT */
+
+                       goto sigill;
+
+                       /*  LWC2, SWC2, LDC2, SDC2 are not serviced */
+               }
+
+               goto sigbus;
+
+       case mm_pool32c_op:
+               switch (insn.mm_m_format.func) {
+               case mm_lwu_func:
+                       reg = insn.mm_m_format.rd;
+                       goto loadWU;
+               }
+
+               /*  LL,SC,LLD,SCD are not serviced */
+               goto sigbus;
+
+       case mm_pool32f_op:
+               switch (insn.mm_x_format.func) {
+               case mm_lwxc1_func:
+               case mm_swxc1_func:
+               case mm_ldxc1_func:
+               case mm_sdxc1_func:
+                       goto fpu_emul;
+               }
+
+               goto sigbus;
+
+       case mm_ldc132_op:
+       case mm_sdc132_op:
+       case mm_lwc132_op:
+       case mm_swc132_op:
+fpu_emul:
+               /* roll back jump/branch */
+               regs->cp0_epc = origpc;
+               regs->regs[31] = orig31;
+
+               die_if_kernel("Unaligned FP access in kernel code", regs);
+               BUG_ON(!used_math());
+               BUG_ON(!is_fpu_owner());
+
+               lose_fpu(1);    /* save the FPU state for the emulator */
+               res = fpu_emulator_cop1Handler(regs, &current->thread.fpu, 1,
+                                              &fault_addr);
+               own_fpu(1);     /* restore FPU state */
+
+               /* If something went wrong, signal */
+               process_fpemu_return(res, fault_addr, 0);
+
+               if (res == 0)
+                       goto success;
+               return;
+
+       case mm_lh32_op:
+               reg = insn.mm_i_format.rt;
+               goto loadHW;
+
+       case mm_lhu32_op:
+               reg = insn.mm_i_format.rt;
+               goto loadHWU;
+
+       case mm_lw32_op:
+               reg = insn.mm_i_format.rt;
+               goto loadW;
+
+       case mm_sh32_op:
+               reg = insn.mm_i_format.rt;
+               goto storeHW;
+
+       case mm_sw32_op:
+               reg = insn.mm_i_format.rt;
+               goto storeW;
+
+       case mm_ld32_op:
+               reg = insn.mm_i_format.rt;
+               goto loadDW;
+
+       case mm_sd32_op:
+               reg = insn.mm_i_format.rt;
+               goto storeDW;
+
+       case mm_pool16c_op:
+               switch (insn.mm16_m_format.func) {
+               case mm_lwm16_op:
+                       reg = insn.mm16_m_format.rlist;
+                       rvar = reg + 1;
+                       if (!access_ok(VERIFY_READ, addr, 4 * rvar))
+                               goto sigbus;
+
+                       for (i = 16; rvar; rvar--, i++) {
+                               LoadW(addr, value, res);
+                               if (res)
+                                       goto fault;
+                               addr += 4;
+                               regs->regs[i] = value;
+                       }
+                       LoadW(addr, value, res);
+                       if (res)
+                               goto fault;
+                       regs->regs[31] = value;
+
+                       goto success;
+
+               case mm_swm16_op:
+                       reg = insn.mm16_m_format.rlist;
+                       rvar = reg + 1;
+                       if (!access_ok(VERIFY_WRITE, addr, 4 * rvar))
+                               goto sigbus;
+
+                       for (i = 16; rvar; rvar--, i++) {
+                               value = regs->regs[i];
+                               StoreW(addr, value, res);
+                               if (res)
+                                       goto fault;
+                               addr += 4;
+                       }
+                       value = regs->regs[31];
+                       StoreW(addr, value, res);
+                       if (res)
+                               goto fault;
+
+                       goto success;
+
+               }
+
+               goto sigbus;
+
+       case mm_lhu16_op:
+               reg = reg16to32[insn.mm16_rb_format.rt];
+               goto loadHWU;
+
+       case mm_lw16_op:
+               reg = reg16to32[insn.mm16_rb_format.rt];
+               goto loadW;
+
+       case mm_sh16_op:
+               reg = reg16to32st[insn.mm16_rb_format.rt];
+               goto storeHW;
+
+       case mm_sw16_op:
+               reg = reg16to32st[insn.mm16_rb_format.rt];
+               goto storeW;
+
+       case mm_lwsp16_op:
+               reg = insn.mm16_r5_format.rt;
+               goto loadW;
+
+       case mm_swsp16_op:
+               reg = insn.mm16_r5_format.rt;
+               goto storeW;
+
+       case mm_lwgp16_op:
+               reg = reg16to32[insn.mm16_r3_format.rt];
+               goto loadW;
+
+       default:
+               goto sigill;
+       }
+
+loadHW:
+       if (!access_ok(VERIFY_READ, addr, 2))
+               goto sigbus;
+
+       LoadHW(addr, value, res);
+       if (res)
+               goto fault;
+       regs->regs[reg] = value;
+       goto success;
+
+loadHWU:
+       if (!access_ok(VERIFY_READ, addr, 2))
+               goto sigbus;
+
+       LoadHWU(addr, value, res);
+       if (res)
+               goto fault;
+       regs->regs[reg] = value;
+       goto success;
+
+loadW:
+       if (!access_ok(VERIFY_READ, addr, 4))
+               goto sigbus;
+
+       LoadW(addr, value, res);
+       if (res)
+               goto fault;
+       regs->regs[reg] = value;
+       goto success;
+
+loadWU:
+#ifdef CONFIG_64BIT
+       /*
+        * A 32-bit kernel might be running on a 64-bit processor.  But
+        * if we're on a 32-bit processor and an i-cache incoherency
+        * or race makes us see a 64-bit instruction here the sdl/sdr
+        * would blow up, so for now we don't handle unaligned 64-bit
+        * instructions on 32-bit kernels.
+        */
+       if (!access_ok(VERIFY_READ, addr, 4))
+               goto sigbus;
+
+       LoadWU(addr, value, res);
+       if (res)
+               goto fault;
+       regs->regs[reg] = value;
+       goto success;
+#endif /* CONFIG_64BIT */
+
+       /* Cannot handle 64-bit instructions in 32-bit kernel */
+       goto sigill;
+
+loadDW:
+#ifdef CONFIG_64BIT
+       /*
+        * A 32-bit kernel might be running on a 64-bit processor.  But
+        * if we're on a 32-bit processor and an i-cache incoherency
+        * or race makes us see a 64-bit instruction here the sdl/sdr
+        * would blow up, so for now we don't handle unaligned 64-bit
+        * instructions on 32-bit kernels.
+        */
+       if (!access_ok(VERIFY_READ, addr, 8))
+               goto sigbus;
+
+       LoadDW(addr, value, res);
+       if (res)
+               goto fault;
+       regs->regs[reg] = value;
+       goto success;
+#endif /* CONFIG_64BIT */
+
+       /* Cannot handle 64-bit instructions in 32-bit kernel */
+       goto sigill;
+
+storeHW:
+       if (!access_ok(VERIFY_WRITE, addr, 2))
+               goto sigbus;
+
+       value = regs->regs[reg];
+       StoreHW(addr, value, res);
+       if (res)
+               goto fault;
+       goto success;
+
+storeW:
+       if (!access_ok(VERIFY_WRITE, addr, 4))
+               goto sigbus;
+
+       value = regs->regs[reg];
+       StoreW(addr, value, res);
+       if (res)
+               goto fault;
+       goto success;
+
+storeDW:
+#ifdef CONFIG_64BIT
+       /*
+        * A 32-bit kernel might be running on a 64-bit processor.  But
+        * if we're on a 32-bit processor and an i-cache incoherency
+        * or race makes us see a 64-bit instruction here the sdl/sdr
+        * would blow up, so for now we don't handle unaligned 64-bit
+        * instructions on 32-bit kernels.
+        */
+       if (!access_ok(VERIFY_WRITE, addr, 8))
+               goto sigbus;
+
+       value = regs->regs[reg];
+       StoreDW(addr, value, res);
+       if (res)
+               goto fault;
+       goto success;
+#endif /* CONFIG_64BIT */
+
+       /* Cannot handle 64-bit instructions in 32-bit kernel */
+       goto sigill;
+
+success:
+       regs->cp0_epc = contpc; /* advance or branch */
+
+#ifdef CONFIG_DEBUG_FS
+       unaligned_instructions++;
+#endif
+       return;
+
+fault:
+       /* roll back jump/branch */
+       regs->cp0_epc = origpc;
+       regs->regs[31] = orig31;
+       /* Did we have an exception handler installed? */
+       if (fixup_exception(regs))
+               return;
+
+       die_if_kernel("Unhandled kernel unaligned access", regs);
+       force_sig(SIGSEGV, current);
+
+       return;
+
+sigbus:
+       die_if_kernel("Unhandled kernel unaligned access", regs);
+       force_sig(SIGBUS, current);
+
+       return;
+
+sigill:
+       die_if_kernel
+           ("Unhandled kernel unaligned access or invalid instruction", regs);
+       force_sig(SIGILL, current);
+}
+
+static void emulate_load_store_MIPS16e(struct pt_regs *regs, void __user * addr)
+{
+       unsigned long value;
+       unsigned int res;
+       int reg;
+       unsigned long orig31;
+       u16 __user *pc16;
+       unsigned long origpc;
+       union mips16e_instruction mips16inst, oldinst;
+
+       origpc = regs->cp0_epc;
+       orig31 = regs->regs[31];
+       pc16 = (unsigned short __user *)msk_isa16_mode(origpc);
+       /*
+        * This load never faults.
+        */
+       __get_user(mips16inst.full, pc16);
+       oldinst = mips16inst;
+
+       /* skip EXTEND instruction */
+       if (mips16inst.ri.opcode == MIPS16e_extend_op) {
+               pc16++;
+               __get_user(mips16inst.full, pc16);
+       } else if (delay_slot(regs)) {
+               /*  skip jump instructions */
+               /*  JAL/JALX are 32 bits but have OPCODE in first short int */
+               if (mips16inst.ri.opcode == MIPS16e_jal_op)
+                       pc16++;
+               pc16++;
+               if (get_user(mips16inst.full, pc16))
+                       goto sigbus;
+       }
+
+       switch (mips16inst.ri.opcode) {
+       case MIPS16e_i64_op:    /* I64 or RI64 instruction */
+               switch (mips16inst.i64.func) {  /* I64/RI64 func field check */
+               case MIPS16e_ldpc_func:
+               case MIPS16e_ldsp_func:
+                       reg = reg16to32[mips16inst.ri64.ry];
+                       goto loadDW;
+
+               case MIPS16e_sdsp_func:
+                       reg = reg16to32[mips16inst.ri64.ry];
+                       goto writeDW;
+
+               case MIPS16e_sdrasp_func:
+                       reg = 29;       /* GPRSP */
+                       goto writeDW;
+               }
+
+               goto sigbus;
+
+       case MIPS16e_swsp_op:
+       case MIPS16e_lwpc_op:
+       case MIPS16e_lwsp_op:
+               reg = reg16to32[mips16inst.ri.rx];
+               break;
+
+       case MIPS16e_i8_op:
+               if (mips16inst.i8.func != MIPS16e_swrasp_func)
+                       goto sigbus;
+               reg = 29;       /* GPRSP */
+               break;
+
+       default:
+               reg = reg16to32[mips16inst.rri.ry];
+               break;
+       }
+
+       switch (mips16inst.ri.opcode) {
+
+       case MIPS16e_lb_op:
+       case MIPS16e_lbu_op:
+       case MIPS16e_sb_op:
+               goto sigbus;
+
+       case MIPS16e_lh_op:
+               if (!access_ok(VERIFY_READ, addr, 2))
+                       goto sigbus;
+
+               LoadHW(addr, value, res);
+               if (res)
+                       goto fault;
+               MIPS16e_compute_return_epc(regs, &oldinst);
+               regs->regs[reg] = value;
+               break;
+
+       case MIPS16e_lhu_op:
+               if (!access_ok(VERIFY_READ, addr, 2))
+                       goto sigbus;
+
+               LoadHWU(addr, value, res);
+               if (res)
+                       goto fault;
+               MIPS16e_compute_return_epc(regs, &oldinst);
+               regs->regs[reg] = value;
+               break;
+
+       case MIPS16e_lw_op:
+       case MIPS16e_lwpc_op:
+       case MIPS16e_lwsp_op:
+               if (!access_ok(VERIFY_READ, addr, 4))
+                       goto sigbus;
+
+               LoadW(addr, value, res);
+               if (res)
+                       goto fault;
+               MIPS16e_compute_return_epc(regs, &oldinst);
+               regs->regs[reg] = value;
+               break;
+
+       case MIPS16e_lwu_op:
+#ifdef CONFIG_64BIT
+               /*
+                * A 32-bit kernel might be running on a 64-bit processor.  But
+                * if we're on a 32-bit processor and an i-cache incoherency
+                * or race makes us see a 64-bit instruction here the sdl/sdr
+                * would blow up, so for now we don't handle unaligned 64-bit
+                * instructions on 32-bit kernels.
+                */
+               if (!access_ok(VERIFY_READ, addr, 4))
+                       goto sigbus;
+
+               LoadWU(addr, value, res);
+               if (res)
+                       goto fault;
+               MIPS16e_compute_return_epc(regs, &oldinst);
+               regs->regs[reg] = value;
+               break;
+#endif /* CONFIG_64BIT */
+
+               /* Cannot handle 64-bit instructions in 32-bit kernel */
+               goto sigill;
+
+       case MIPS16e_ld_op:
+loadDW:
+#ifdef CONFIG_64BIT
+               /*
+                * A 32-bit kernel might be running on a 64-bit processor.  But
+                * if we're on a 32-bit processor and an i-cache incoherency
+                * or race makes us see a 64-bit instruction here the sdl/sdr
+                * would blow up, so for now we don't handle unaligned 64-bit
+                * instructions on 32-bit kernels.
+                */
+               if (!access_ok(VERIFY_READ, addr, 8))
+                       goto sigbus;
+
+               LoadDW(addr, value, res);
+               if (res)
+                       goto fault;
+               MIPS16e_compute_return_epc(regs, &oldinst);
+               regs->regs[reg] = value;
+               break;
+#endif /* CONFIG_64BIT */
+
+               /* Cannot handle 64-bit instructions in 32-bit kernel */
+               goto sigill;
+
+       case MIPS16e_sh_op:
+               if (!access_ok(VERIFY_WRITE, addr, 2))
+                       goto sigbus;
+
+               MIPS16e_compute_return_epc(regs, &oldinst);
+               value = regs->regs[reg];
+               StoreHW(addr, value, res);
+               if (res)
+                       goto fault;
+               break;
+
+       case MIPS16e_sw_op:
+       case MIPS16e_swsp_op:
+       case MIPS16e_i8_op:     /* actually - MIPS16e_swrasp_func */
+               if (!access_ok(VERIFY_WRITE, addr, 4))
+                       goto sigbus;
+
+               MIPS16e_compute_return_epc(regs, &oldinst);
+               value = regs->regs[reg];
+               StoreW(addr, value, res);
+               if (res)
+                       goto fault;
+               break;
+
+       case MIPS16e_sd_op:
+writeDW:
+#ifdef CONFIG_64BIT
+               /*
+                * A 32-bit kernel might be running on a 64-bit processor.  But
+                * if we're on a 32-bit processor and an i-cache incoherency
+                * or race makes us see a 64-bit instruction here the sdl/sdr
+                * would blow up, so for now we don't handle unaligned 64-bit
+                * instructions on 32-bit kernels.
+                */
+               if (!access_ok(VERIFY_WRITE, addr, 8))
+                       goto sigbus;
+
+               MIPS16e_compute_return_epc(regs, &oldinst);
+               value = regs->regs[reg];
+               StoreDW(addr, value, res);
+               if (res)
+                       goto fault;
+               break;
+#endif /* CONFIG_64BIT */
+
+               /* Cannot handle 64-bit instructions in 32-bit kernel */
+               goto sigill;
+
+       default:
+               /*
+                * Pheeee...  We encountered an yet unknown instruction or
+                * cache coherence problem.  Die sucker, die ...
+                */
+               goto sigill;
+       }
+
+#ifdef CONFIG_DEBUG_FS
+       unaligned_instructions++;
+#endif
+
+       return;
+
+fault:
+       /* roll back jump/branch */
+       regs->cp0_epc = origpc;
+       regs->regs[31] = orig31;
+       /* Did we have an exception handler installed? */
+       if (fixup_exception(regs))
+               return;
+
+       die_if_kernel("Unhandled kernel unaligned access", regs);
+       force_sig(SIGSEGV, current);
+
+       return;
+
+sigbus:
+       die_if_kernel("Unhandled kernel unaligned access", regs);
+       force_sig(SIGBUS, current);
+
+       return;
+
+sigill:
+       die_if_kernel
+           ("Unhandled kernel unaligned access or invalid instruction", regs);
+       force_sig(SIGILL, current);
+}
+
+asmlinkage void do_ade(struct pt_regs *regs)
+{
+       enum ctx_state prev_state;
+       unsigned int __user *pc;
+       mm_segment_t seg;
+
+       prev_state = exception_enter();
+       perf_sw_event(PERF_COUNT_SW_ALIGNMENT_FAULTS,
+                       1, regs, regs->cp0_badvaddr);
+       /*
+        * Did we catch a fault trying to load an instruction?
+        */
+       if (regs->cp0_badvaddr == regs->cp0_epc)
+               goto sigbus;
+
+       if (user_mode(regs) && !test_thread_flag(TIF_FIXADE))
+               goto sigbus;
+       if (unaligned_action == UNALIGNED_ACTION_SIGNAL)
+               goto sigbus;
+
+       /*
+        * Do branch emulation only if we didn't forward the exception.
+        * This is all so but ugly ...
+        */
+
+       /*
+        * Are we running in microMIPS mode?
+        */
+       if (get_isa16_mode(regs->cp0_epc)) {
+               /*
+                * Did we catch a fault trying to load an instruction in
+                * 16-bit mode?
+                */
+               if (regs->cp0_badvaddr == msk_isa16_mode(regs->cp0_epc))
+                       goto sigbus;
+               if (unaligned_action == UNALIGNED_ACTION_SHOW)
+                       show_registers(regs);
+
+               if (cpu_has_mmips) {
+                       seg = get_fs();
+                       if (!user_mode(regs))
+                               set_fs(KERNEL_DS);
+                       emulate_load_store_microMIPS(regs,
+                               (void __user *)regs->cp0_badvaddr);
+                       set_fs(seg);
+
+                       return;
+               }
+
+               if (cpu_has_mips16) {
+                       seg = get_fs();
+                       if (!user_mode(regs))
+                               set_fs(KERNEL_DS);
+                       emulate_load_store_MIPS16e(regs,
+                               (void __user *)regs->cp0_badvaddr);
+                       set_fs(seg);
+
+                       return;
+       }
+
+               goto sigbus;
+       }
+
+       if (unaligned_action == UNALIGNED_ACTION_SHOW)
+               show_registers(regs);
+       pc = (unsigned int __user *)exception_epc(regs);
+
+       seg = get_fs();
+       if (!user_mode(regs))
+               set_fs(KERNEL_DS);
+       emulate_load_store_insn(regs, (void __user *)regs->cp0_badvaddr, pc);
+       set_fs(seg);
+
+       return;
+
+sigbus:
+       die_if_kernel("Kernel unaligned instruction access", regs);
+       force_sig(SIGBUS, current);
+
+       /*
+        * XXX On return from the signal handler we should advance the epc
+        */
+       exception_exit(prev_state);
+}
+
+#ifdef CONFIG_DEBUG_FS
+extern struct dentry *mips_debugfs_dir;
+static int __init debugfs_unaligned(void)
+{
+       struct dentry *d;
+
+       if (!mips_debugfs_dir)
+               return -ENODEV;
+       d = debugfs_create_u32("unaligned_instructions", S_IRUGO,
+                              mips_debugfs_dir, &unaligned_instructions);
+       if (!d)
+               return -ENOMEM;
+       d = debugfs_create_u32("unaligned_action", S_IRUGO | S_IWUSR,
+                              mips_debugfs_dir, &unaligned_action);
+       if (!d)
+               return -ENOMEM;
+       return 0;
+}
+__initcall(debugfs_unaligned);
+#endif