--- /dev/null
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Derived from IRIX <sys/SN/klconfig.h>.
+ *
+ * Copyright (C) 1992 - 1997, 1999, 2000 Silicon Graphics, Inc.
+ * Copyright (C) 1999, 2000 by Ralf Baechle
+ */
+#ifndef _ASM_SN_KLCONFIG_H
+#define _ASM_SN_KLCONFIG_H
+
+/*
+ * The KLCONFIG structures store info about the various BOARDs found
+ * during Hardware Discovery. In addition, it stores info about the
+ * components found on the BOARDs.
+ */
+
+/*
+ * WARNING:
+ * Certain assembly language routines (notably xxxxx.s) in the IP27PROM
+ * will depend on the format of the data structures in this file. In
+ * most cases, rearranging the fields can seriously break things.
+ * Adding fields in the beginning or middle can also break things.
+ * Add fields if necessary, to the end of a struct in such a way
+ * that offsets of existing fields do not change.
+ */
+
+#include <linux/types.h>
+#include <asm/sn/types.h>
+
+#if defined(CONFIG_SGI_IP27)
+
+#include <asm/sn/sn0/addrs.h>
+//#include <sys/SN/router.h>
+// XXX Stolen from <sys/SN/router.h>:
+#define MAX_ROUTER_PORTS (6) /* Max. number of ports on a router */
+#include <asm/sn/fru.h>
+//#include <sys/graph.h>
+//#include <sys/xtalk/xbow.h>
+
+#elif defined(CONFIG_SGI_IP35)
+
+#include <asm/sn/sn1/addrs.h>
+#include <sys/sn/router.h>
+#include <sys/graph.h>
+#include <asm/xtalk/xbow.h>
+
+#endif /* !CONFIG_SGI_IP27 && !CONFIG_SGI_IP35 */
+
+#if defined(CONFIG_SGI_IP27) || defined(CONFIG_SGI_IP35)
+#include <asm/sn/agent.h>
+#include <asm/fw/arc/types.h>
+#include <asm/fw/arc/hinv.h>
+#if defined(CONFIG_SGI_IP35)
+// The hack file has to be before vector and after sn0_fru....
+#include <asm/hack.h>
+#include <asm/sn/vector.h>
+#include <asm/xtalk/xtalk.h>
+#endif /* CONFIG_SGI_IP35 */
+#endif /* CONFIG_SGI_IP27 || CONFIG_SGI_IP35 */
+
+typedef u64 nic_t;
+
+#define KLCFGINFO_MAGIC 0xbeedbabe
+
+typedef s32 klconf_off_t;
+
+/*
+ * Some IMPORTANT OFFSETS. These are the offsets on all NODES.
+ */
+#define MAX_MODULE_ID 255
+#define SIZE_PAD 4096 /* 4k padding for structures */
+/*
+ * 1 NODE brd, 2 Router brd (1 8p, 1 meta), 6 Widgets,
+ * 2 Midplanes assuming no pci card cages
+ */
+#define MAX_SLOTS_PER_NODE (1 + 2 + 6 + 2)
+
+/* XXX if each node is guaranteed to have some memory */
+
+#define MAX_PCI_DEVS 8
+
+/* lboard_t->brd_flags fields */
+/* All bits in this field are currently used. Try the pad fields if
+ you need more flag bits */
+
+#define ENABLE_BOARD 0x01
+#define FAILED_BOARD 0x02
+#define DUPLICATE_BOARD 0x04 /* Boards like midplanes/routers which
+ are discovered twice. Use one of them */
+#define VISITED_BOARD 0x08 /* Used for compact hub numbering. */
+#define LOCAL_MASTER_IO6 0x10 /* master io6 for that node */
+#define GLOBAL_MASTER_IO6 0x20
+#define THIRD_NIC_PRESENT 0x40 /* for future use */
+#define SECOND_NIC_PRESENT 0x80 /* addons like MIO are present */
+
+/* klinfo->flags fields */
+
+#define KLINFO_ENABLE 0x01 /* This component is enabled */
+#define KLINFO_FAILED 0x02 /* This component failed */
+#define KLINFO_DEVICE 0x04 /* This component is a device */
+#define KLINFO_VISITED 0x08 /* This component has been visited */
+#define KLINFO_CONTROLLER 0x10 /* This component is a device controller */
+#define KLINFO_INSTALL 0x20 /* Install a driver */
+#define KLINFO_HEADLESS 0x40 /* Headless (or hubless) component */
+#define IS_CONSOLE_IOC3(i) ((((klinfo_t *)i)->flags) & KLINFO_INSTALL)
+
+#define GB2 0x80000000
+
+#define MAX_RSV_PTRS 32
+
+/* Structures to manage various data storage areas */
+/* The numbers must be contiguous since the array index i
+ is used in the code to allocate various areas.
+*/
+
+#define BOARD_STRUCT 0
+#define COMPONENT_STRUCT 1
+#define ERRINFO_STRUCT 2
+#define KLMALLOC_TYPE_MAX (ERRINFO_STRUCT + 1)
+#define DEVICE_STRUCT 3
+
+
+typedef struct console_s {
+ unsigned long uart_base;
+ unsigned long config_base;
+ unsigned long memory_base;
+ short baud;
+ short flag;
+ int type;
+ nasid_t nasid;
+ char wid;
+ char npci;
+ nic_t baseio_nic;
+} console_t;
+
+typedef struct klc_malloc_hdr {
+ klconf_off_t km_base;
+ klconf_off_t km_limit;
+ klconf_off_t km_current;
+} klc_malloc_hdr_t;
+
+/* Functions/macros needed to use this structure */
+
+typedef struct kl_config_hdr {
+ u64 ch_magic; /* set this to KLCFGINFO_MAGIC */
+ u32 ch_version; /* structure version number */
+ klconf_off_t ch_malloc_hdr_off; /* offset of ch_malloc_hdr */
+ klconf_off_t ch_cons_off; /* offset of ch_cons */
+ klconf_off_t ch_board_info; /* the link list of boards */
+ console_t ch_cons_info; /* address info of the console */
+ klc_malloc_hdr_t ch_malloc_hdr[KLMALLOC_TYPE_MAX];
+ confidence_t ch_sw_belief; /* confidence that software is bad*/
+ confidence_t ch_sn0net_belief; /* confidence that sn0net is bad */
+} kl_config_hdr_t;
+
+
+#define KL_CONFIG_HDR(_nasid) ((kl_config_hdr_t *)(KLCONFIG_ADDR(_nasid)))
+#define KL_CONFIG_INFO_OFFSET(_nasid) \
+ (KL_CONFIG_HDR(_nasid)->ch_board_info)
+#define KL_CONFIG_INFO_SET_OFFSET(_nasid, _off) \
+ (KL_CONFIG_HDR(_nasid)->ch_board_info = (_off))
+
+#define KL_CONFIG_INFO(_nasid) \
+ (lboard_t *)((KL_CONFIG_HDR(_nasid)->ch_board_info) ? \
+ NODE_OFFSET_TO_K1((_nasid), KL_CONFIG_HDR(_nasid)->ch_board_info) : \
+ 0)
+#define KL_CONFIG_MAGIC(_nasid) (KL_CONFIG_HDR(_nasid)->ch_magic)
+
+#define KL_CONFIG_CHECK_MAGIC(_nasid) \
+ (KL_CONFIG_HDR(_nasid)->ch_magic == KLCFGINFO_MAGIC)
+
+#define KL_CONFIG_HDR_INIT_MAGIC(_nasid) \
+ (KL_CONFIG_HDR(_nasid)->ch_magic = KLCFGINFO_MAGIC)
+
+/* --- New Macros for the changed kl_config_hdr_t structure --- */
+
+#define PTR_CH_MALLOC_HDR(_k) ((klc_malloc_hdr_t *)\
+ ((unsigned long)_k + (_k->ch_malloc_hdr_off)))
+
+#define KL_CONFIG_CH_MALLOC_HDR(_n) PTR_CH_MALLOC_HDR(KL_CONFIG_HDR(_n))
+
+#define PTR_CH_CONS_INFO(_k) ((console_t *)\
+ ((unsigned long)_k + (_k->ch_cons_off)))
+
+#define KL_CONFIG_CH_CONS_INFO(_n) PTR_CH_CONS_INFO(KL_CONFIG_HDR(_n))
+
+/* ------------------------------------------------------------- */
+
+#define KL_CONFIG_INFO_START(_nasid) \
+ (klconf_off_t)(KLCONFIG_OFFSET(_nasid) + sizeof(kl_config_hdr_t))
+
+#define KL_CONFIG_BOARD_NASID(_brd) ((_brd)->brd_nasid)
+#define KL_CONFIG_BOARD_SET_NEXT(_brd, _off) ((_brd)->brd_next = (_off))
+
+#define KL_CONFIG_DUPLICATE_BOARD(_brd) ((_brd)->brd_flags & DUPLICATE_BOARD)
+
+#define XBOW_PORT_TYPE_HUB(_xbowp, _link) \
+ ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_flag & XBOW_PORT_HUB)
+#define XBOW_PORT_TYPE_IO(_xbowp, _link) \
+ ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_flag & XBOW_PORT_IO)
+
+#define XBOW_PORT_IS_ENABLED(_xbowp, _link) \
+ ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_flag & XBOW_PORT_ENABLE)
+#define XBOW_PORT_NASID(_xbowp, _link) \
+ ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_nasid)
+
+#define XBOW_PORT_IO 0x1
+#define XBOW_PORT_HUB 0x2
+#define XBOW_PORT_ENABLE 0x4
+
+#define SN0_PORT_FENCE_SHFT 0
+#define SN0_PORT_FENCE_MASK (1 << SN0_PORT_FENCE_SHFT)
+
+/*
+ * The KLCONFIG area is organized as a LINKED LIST of BOARDs. A BOARD
+ * can be either 'LOCAL' or 'REMOTE'. LOCAL means it is attached to
+ * the LOCAL/current NODE. REMOTE means it is attached to a different
+ * node.(TBD - Need a way to treat ROUTER boards.)
+ *
+ * There are 2 different structures to represent these boards -
+ * lboard - Local board, rboard - remote board. These 2 structures
+ * can be arbitrarily mixed in the LINKED LIST of BOARDs. (Refer
+ * Figure below). The first byte of the rboard or lboard structure
+ * is used to find out its type - no unions are used.
+ * If it is a lboard, then the config info of this board will be found
+ * on the local node. (LOCAL NODE BASE + offset value gives pointer to
+ * the structure.
+ * If it is a rboard, the local structure contains the node number
+ * and the offset of the beginning of the LINKED LIST on the remote node.
+ * The details of the hardware on a remote node can be built locally,
+ * if required, by reading the LINKED LIST on the remote node and
+ * ignoring all the rboards on that node.
+ *
+ * The local node uses the REMOTE NODE NUMBER + OFFSET to point to the
+ * First board info on the remote node. The remote node list is
+ * traversed as the local list, using the REMOTE BASE ADDRESS and not
+ * the local base address and ignoring all rboard values.
+ *
+ *
+ KLCONFIG
+
+ +------------+ +------------+ +------------+ +------------+
+ | lboard | +-->| lboard | +-->| rboard | +-->| lboard |
+ +------------+ | +------------+ | +------------+ | +------------+
+ | board info | | | board info | | |errinfo,bptr| | | board info |
+ +------------+ | +------------+ | +------------+ | +------------+
+ | offset |--+ | offset |--+ | offset |--+ |offset=NULL |
+ +------------+ +------------+ +------------+ +------------+
+
+
+ +------------+
+ | board info |
+ +------------+ +--------------------------------+
+ | compt 1 |------>| type, rev, diaginfo, size ... | (CPU)
+ +------------+ +--------------------------------+
+ | compt 2 |--+
+ +------------+ | +--------------------------------+
+ | ... | +--->| type, rev, diaginfo, size ... | (MEM_BANK)
+ +------------+ +--------------------------------+
+ | errinfo |--+
+ +------------+ | +--------------------------------+
+ +--->|r/l brd errinfo,compt err flags |
+ +--------------------------------+
+
+ *
+ * Each BOARD consists of COMPONENTs and the BOARD structure has
+ * pointers (offsets) to its COMPONENT structure.
+ * The COMPONENT structure has version info, size and speed info, revision,
+ * error info and the NIC info. This structure can accommodate any
+ * BOARD with arbitrary COMPONENT composition.
+ *
+ * The ERRORINFO part of each BOARD has error information
+ * that describes errors about the BOARD itself. It also has flags to
+ * indicate the COMPONENT(s) on the board that have errors. The error
+ * information specific to the COMPONENT is present in the respective
+ * COMPONENT structure.
+ *
+ * The ERRORINFO structure is also treated like a COMPONENT, ie. the
+ * BOARD has pointers(offset) to the ERRORINFO structure. The rboard
+ * structure also has a pointer to the ERRORINFO structure. This is
+ * the place to store ERRORINFO about a REMOTE NODE, if the HUB on
+ * that NODE is not working or if the REMOTE MEMORY is BAD. In cases where
+ * only the CPU of the REMOTE NODE is disabled, the ERRORINFO pointer can
+ * be a NODE NUMBER, REMOTE OFFSET combination, pointing to error info
+ * which is present on the REMOTE NODE.(TBD)
+ * REMOTE ERRINFO can be stored on any of the nearest nodes
+ * or on all the nearest nodes.(TBD)
+ * Like BOARD structures, REMOTE ERRINFO structures can be built locally
+ * using the rboard errinfo pointer.
+ *
+ * In order to get useful information from this Data organization, a set of
+ * interface routines are provided (TBD). The important thing to remember while
+ * manipulating the structures, is that, the NODE number information should
+ * be used. If the NODE is non-zero (remote) then each offset should
+ * be added to the REMOTE BASE ADDR else it should be added to the LOCAL BASE ADDR.
+ * This includes offsets for BOARDS, COMPONENTS and ERRORINFO.
+ *
+ * Note that these structures do not provide much info about connectivity.
+ * That info will be part of HWGRAPH, which is an extension of the cfg_t
+ * data structure. (ref IP27prom/cfg.h) It has to be extended to include
+ * the IO part of the Network(TBD).
+ *
+ * The data structures below define the above concepts.
+ */
+
+/*
+ * Values for CPU types
+ */
+#define KL_CPU_R4000 0x1 /* Standard R4000 */
+#define KL_CPU_TFP 0x2 /* TFP processor */
+#define KL_CPU_R10000 0x3 /* R10000 (T5) */
+#define KL_CPU_NONE (-1) /* no cpu present in slot */
+
+/*
+ * IP27 BOARD classes
+ */
+
+#define KLCLASS_MASK 0xf0
+#define KLCLASS_NONE 0x00
+#define KLCLASS_NODE 0x10 /* CPU, Memory and HUB board */
+#define KLCLASS_CPU KLCLASS_NODE
+#define KLCLASS_IO 0x20 /* BaseIO, 4 ch SCSI, ethernet, FDDI
+ and the non-graphics widget boards */
+#define KLCLASS_ROUTER 0x30 /* Router board */
+#define KLCLASS_MIDPLANE 0x40 /* We need to treat this as a board
+ so that we can record error info */
+#define KLCLASS_GFX 0x50 /* graphics boards */
+
+#define KLCLASS_PSEUDO_GFX 0x60 /* HDTV type cards that use a gfx
+ * hw ifc to xtalk and are not gfx
+ * class for sw purposes */
+
+#define KLCLASS_MAX 7 /* Bump this if a new CLASS is added */
+#define KLTYPE_MAX 10 /* Bump this if a new CLASS is added */
+
+#define KLCLASS_UNKNOWN 0xf0
+
+#define KLCLASS(_x) ((_x) & KLCLASS_MASK)
+
+/*
+ * IP27 board types
+ */
+
+#define KLTYPE_MASK 0x0f
+#define KLTYPE_NONE 0x00
+#define KLTYPE_EMPTY 0x00
+
+#define KLTYPE_WEIRDCPU (KLCLASS_CPU | 0x0)
+#define KLTYPE_IP27 (KLCLASS_CPU | 0x1) /* 2 CPUs(R10K) per board */
+
+#define KLTYPE_WEIRDIO (KLCLASS_IO | 0x0)
+#define KLTYPE_BASEIO (KLCLASS_IO | 0x1) /* IOC3, SuperIO, Bridge, SCSI */
+#define KLTYPE_IO6 KLTYPE_BASEIO /* Additional name */
+#define KLTYPE_4CHSCSI (KLCLASS_IO | 0x2)
+#define KLTYPE_MSCSI KLTYPE_4CHSCSI /* Additional name */
+#define KLTYPE_ETHERNET (KLCLASS_IO | 0x3)
+#define KLTYPE_MENET KLTYPE_ETHERNET /* Additional name */
+#define KLTYPE_FDDI (KLCLASS_IO | 0x4)
+#define KLTYPE_UNUSED (KLCLASS_IO | 0x5) /* XXX UNUSED */
+#define KLTYPE_HAROLD (KLCLASS_IO | 0x6) /* PCI SHOE BOX */
+#define KLTYPE_PCI KLTYPE_HAROLD
+#define KLTYPE_VME (KLCLASS_IO | 0x7) /* Any 3rd party VME card */
+#define KLTYPE_MIO (KLCLASS_IO | 0x8)
+#define KLTYPE_FC (KLCLASS_IO | 0x9)
+#define KLTYPE_LINC (KLCLASS_IO | 0xA)
+#define KLTYPE_TPU (KLCLASS_IO | 0xB) /* Tensor Processing Unit */
+#define KLTYPE_GSN_A (KLCLASS_IO | 0xC) /* Main GSN board */
+#define KLTYPE_GSN_B (KLCLASS_IO | 0xD) /* Auxiliary GSN board */
+
+#define KLTYPE_GFX (KLCLASS_GFX | 0x0) /* unknown graphics type */
+#define KLTYPE_GFX_KONA (KLCLASS_GFX | 0x1) /* KONA graphics on IP27 */
+#define KLTYPE_GFX_MGRA (KLCLASS_GFX | 0x3) /* MGRAS graphics on IP27 */
+
+#define KLTYPE_WEIRDROUTER (KLCLASS_ROUTER | 0x0)
+#define KLTYPE_ROUTER (KLCLASS_ROUTER | 0x1)
+#define KLTYPE_ROUTER2 KLTYPE_ROUTER /* Obsolete! */
+#define KLTYPE_NULL_ROUTER (KLCLASS_ROUTER | 0x2)
+#define KLTYPE_META_ROUTER (KLCLASS_ROUTER | 0x3)
+
+#define KLTYPE_WEIRDMIDPLANE (KLCLASS_MIDPLANE | 0x0)
+#define KLTYPE_MIDPLANE8 (KLCLASS_MIDPLANE | 0x1) /* 8 slot backplane */
+#define KLTYPE_MIDPLANE KLTYPE_MIDPLANE8
+#define KLTYPE_PBRICK_XBOW (KLCLASS_MIDPLANE | 0x2)
+
+#define KLTYPE_IOBRICK (KLCLASS_IOBRICK | 0x0)
+#define KLTYPE_IBRICK (KLCLASS_IOBRICK | 0x1)
+#define KLTYPE_PBRICK (KLCLASS_IOBRICK | 0x2)
+#define KLTYPE_XBRICK (KLCLASS_IOBRICK | 0x3)
+
+#define KLTYPE_PBRICK_BRIDGE KLTYPE_PBRICK
+
+/* The value of type should be more than 8 so that hinv prints
+ * out the board name from the NIC string. For values less than
+ * 8 the name of the board needs to be hard coded in a few places.
+ * When bringup started nic names had not standardized and so we
+ * had to hard code. (For people interested in history.)
+ */
+#define KLTYPE_XTHD (KLCLASS_PSEUDO_GFX | 0x9)
+
+#define KLTYPE_UNKNOWN (KLCLASS_UNKNOWN | 0xf)
+
+#define KLTYPE(_x) ((_x) & KLTYPE_MASK)
+#define IS_MIO_PRESENT(l) ((l->brd_type == KLTYPE_BASEIO) && \
+ (l->brd_flags & SECOND_NIC_PRESENT))
+#define IS_MIO_IOC3(l, n) (IS_MIO_PRESENT(l) && (n > 2))
+
+/*
+ * board structures
+ */
+
+#define MAX_COMPTS_PER_BRD 24
+
+#define LOCAL_BOARD 1
+#define REMOTE_BOARD 2
+
+#define LBOARD_STRUCT_VERSION 2
+
+typedef struct lboard_s {
+ klconf_off_t brd_next; /* Next BOARD */
+ unsigned char struct_type; /* type of structure, local or remote */
+ unsigned char brd_type; /* type+class */
+ unsigned char brd_sversion; /* version of this structure */
+ unsigned char brd_brevision; /* board revision */
+ unsigned char brd_promver; /* board prom version, if any */
+ unsigned char brd_flags; /* Enabled, Disabled etc */
+ unsigned char brd_slot; /* slot number */
+ unsigned short brd_debugsw; /* Debug switches */
+ moduleid_t brd_module; /* module to which it belongs */
+ partid_t brd_partition; /* Partition number */
+ unsigned short brd_diagval; /* diagnostic value */
+ unsigned short brd_diagparm; /* diagnostic parameter */
+ unsigned char brd_inventory; /* inventory history */
+ unsigned char brd_numcompts; /* Number of components */
+ nic_t brd_nic; /* Number in CAN */
+ nasid_t brd_nasid; /* passed parameter */
+ klconf_off_t brd_compts[MAX_COMPTS_PER_BRD]; /* pointers to COMPONENTS */
+ klconf_off_t brd_errinfo; /* Board's error information */
+ struct lboard_s *brd_parent; /* Logical parent for this brd */
+ vertex_hdl_t brd_graph_link; /* vertex hdl to connect extern compts */
+ confidence_t brd_confidence; /* confidence that the board is bad */
+ nasid_t brd_owner; /* who owns this board */
+ unsigned char brd_nic_flags; /* To handle 8 more NICs */
+ char brd_name[32];
+} lboard_t;
+
+
+/*
+ * Make sure we pass back the calias space address for local boards.
+ * klconfig board traversal and error structure extraction defines.
+ */
+
+#define BOARD_SLOT(_brd) ((_brd)->brd_slot)
+
+#define KLCF_CLASS(_brd) KLCLASS((_brd)->brd_type)
+#define KLCF_TYPE(_brd) KLTYPE((_brd)->brd_type)
+#define KLCF_REMOTE(_brd) (((_brd)->struct_type & LOCAL_BOARD) ? 0 : 1)
+#define KLCF_NUM_COMPS(_brd) ((_brd)->brd_numcompts)
+#define KLCF_MODULE_ID(_brd) ((_brd)->brd_module)
+
+#define KLCF_NEXT(_brd) \
+ ((_brd)->brd_next ? \
+ (lboard_t *)(NODE_OFFSET_TO_K1(NASID_GET(_brd), (_brd)->brd_next)):\
+ NULL)
+#define KLCF_COMP(_brd, _ndx) \
+ (klinfo_t *)(NODE_OFFSET_TO_K1(NASID_GET(_brd), \
+ (_brd)->brd_compts[(_ndx)]))
+
+#define KLCF_COMP_ERROR(_brd, _comp) \
+ (NODE_OFFSET_TO_K1(NASID_GET(_brd), (_comp)->errinfo))
+
+#define KLCF_COMP_TYPE(_comp) ((_comp)->struct_type)
+#define KLCF_BRIDGE_W_ID(_comp) ((_comp)->physid) /* Widget ID */
+
+
+
+/*
+ * Generic info structure. This stores common info about a
+ * component.
+ */
+
+typedef struct klinfo_s { /* Generic info */
+ unsigned char struct_type; /* type of this structure */
+ unsigned char struct_version; /* version of this structure */
+ unsigned char flags; /* Enabled, disabled etc */
+ unsigned char revision; /* component revision */
+ unsigned short diagval; /* result of diagnostics */
+ unsigned short diagparm; /* diagnostic parameter */
+ unsigned char inventory; /* previous inventory status */
+ nic_t nic; /* MUst be aligned properly */
+ unsigned char physid; /* physical id of component */
+ unsigned int virtid; /* virtual id as seen by system */
+ unsigned char widid; /* Widget id - if applicable */
+ nasid_t nasid; /* node number - from parent */
+ char pad1; /* pad out structure. */
+ char pad2; /* pad out structure. */
+ COMPONENT *arcs_compt; /* ptr to the arcs struct for ease*/
+ klconf_off_t errinfo; /* component specific errors */
+ unsigned short pad3; /* pci fields have moved over to */
+ unsigned short pad4; /* klbri_t */
+} klinfo_t ;
+
+#define KLCONFIG_INFO_ENABLED(_i) ((_i)->flags & KLINFO_ENABLE)
+/*
+ * Component structures.
+ * Following are the currently identified components:
+ * CPU, HUB, MEM_BANK,
+ * XBOW(consists of 16 WIDGETs, each of which can be HUB or GRAPHICS or BRIDGE)
+ * BRIDGE, IOC3, SuperIO, SCSI, FDDI
+ * ROUTER
+ * GRAPHICS
+ */
+#define KLSTRUCT_UNKNOWN 0
+#define KLSTRUCT_CPU 1
+#define KLSTRUCT_HUB 2
+#define KLSTRUCT_MEMBNK 3
+#define KLSTRUCT_XBOW 4
+#define KLSTRUCT_BRI 5
+#define KLSTRUCT_IOC3 6
+#define KLSTRUCT_PCI 7
+#define KLSTRUCT_VME 8
+#define KLSTRUCT_ROU 9
+#define KLSTRUCT_GFX 10
+#define KLSTRUCT_SCSI 11
+#define KLSTRUCT_FDDI 12
+#define KLSTRUCT_MIO 13
+#define KLSTRUCT_DISK 14
+#define KLSTRUCT_TAPE 15
+#define KLSTRUCT_CDROM 16
+#define KLSTRUCT_HUB_UART 17
+#define KLSTRUCT_IOC3ENET 18
+#define KLSTRUCT_IOC3UART 19
+#define KLSTRUCT_UNUSED 20 /* XXX UNUSED */
+#define KLSTRUCT_IOC3PCKM 21
+#define KLSTRUCT_RAD 22
+#define KLSTRUCT_HUB_TTY 23
+#define KLSTRUCT_IOC3_TTY 24
+
+/* Early Access IO proms are compatible
+ only with KLSTRUCT values up to 24. */
+
+#define KLSTRUCT_FIBERCHANNEL 25
+#define KLSTRUCT_MOD_SERIAL_NUM 26
+#define KLSTRUCT_IOC3MS 27
+#define KLSTRUCT_TPU 28
+#define KLSTRUCT_GSN_A 29
+#define KLSTRUCT_GSN_B 30
+#define KLSTRUCT_XTHD 31
+
+/*
+ * These are the indices of various components within a lboard structure.
+ */
+
+#define IP27_CPU0_INDEX 0
+#define IP27_CPU1_INDEX 1
+#define IP27_HUB_INDEX 2
+#define IP27_MEM_INDEX 3
+
+#define BASEIO_BRIDGE_INDEX 0
+#define BASEIO_IOC3_INDEX 1
+#define BASEIO_SCSI1_INDEX 2
+#define BASEIO_SCSI2_INDEX 3
+
+#define MIDPLANE_XBOW_INDEX 0
+#define ROUTER_COMPONENT_INDEX 0
+
+#define CH4SCSI_BRIDGE_INDEX 0
+
+/* Info holders for various hardware components */
+
+typedef u64 *pci_t;
+typedef u64 *vmeb_t;
+typedef u64 *vmed_t;
+typedef u64 *fddi_t;
+typedef u64 *scsi_t;
+typedef u64 *mio_t;
+typedef u64 *graphics_t;
+typedef u64 *router_t;
+
+/*
+ * The port info in ip27_cfg area translates to a lboart_t in the
+ * KLCONFIG area. But since KLCONFIG does not use pointers, lboart_t
+ * is stored in terms of a nasid and a offset from start of KLCONFIG
+ * area on that nasid.
+ */
+typedef struct klport_s {
+ nasid_t port_nasid;
+ unsigned char port_flag;
+ klconf_off_t port_offset;
+} klport_t;
+
+typedef struct klcpu_s { /* CPU */
+ klinfo_t cpu_info;
+ unsigned short cpu_prid; /* Processor PRID value */
+ unsigned short cpu_fpirr; /* FPU IRR value */
+ unsigned short cpu_speed; /* Speed in MHZ */
+ unsigned short cpu_scachesz; /* secondary cache size in MB */
+ unsigned short cpu_scachespeed;/* secondary cache speed in MHz */
+} klcpu_t ;
+
+#define CPU_STRUCT_VERSION 2
+
+typedef struct klhub_s { /* HUB */
+ klinfo_t hub_info;
+ unsigned int hub_flags; /* PCFG_HUB_xxx flags */
+ klport_t hub_port; /* hub is connected to this */
+ nic_t hub_box_nic; /* nic of containing box */
+ klconf_off_t hub_mfg_nic; /* MFG NIC string */
+ u64 hub_speed; /* Speed of hub in HZ */
+} klhub_t ;
+
+typedef struct klhub_uart_s { /* HUB */
+ klinfo_t hubuart_info;
+ unsigned int hubuart_flags; /* PCFG_HUB_xxx flags */
+ nic_t hubuart_box_nic; /* nic of containing box */
+} klhub_uart_t ;
+
+#define MEMORY_STRUCT_VERSION 2
+
+typedef struct klmembnk_s { /* MEMORY BANK */
+ klinfo_t membnk_info;
+ short membnk_memsz; /* Total memory in megabytes */
+ short membnk_dimm_select; /* bank to physical addr mapping*/
+ short membnk_bnksz[MD_MEM_BANKS]; /* Memory bank sizes */
+ short membnk_attr;
+} klmembnk_t ;
+
+#define KLCONFIG_MEMBNK_SIZE(_info, _bank) \
+ ((_info)->membnk_bnksz[(_bank)])
+
+
+#define MEMBNK_PREMIUM 1
+#define KLCONFIG_MEMBNK_PREMIUM(_info, _bank) \
+ ((_info)->membnk_attr & (MEMBNK_PREMIUM << (_bank)))
+
+#define MAX_SERIAL_NUM_SIZE 10
+
+typedef struct klmod_serial_num_s {
+ klinfo_t snum_info;
+ union {
+ char snum_str[MAX_SERIAL_NUM_SIZE];
+ unsigned long long snum_int;
+ } snum;
+} klmod_serial_num_t;
+
+/* Macros needed to access serial number structure in lboard_t.
+ Hard coded values are necessary since we cannot treat
+ serial number struct as a component without losing compatibility
+ between prom versions. */
+
+#define GET_SNUM_COMP(_l) ((klmod_serial_num_t *)\
+ KLCF_COMP(_l, _l->brd_numcompts))
+
+#define MAX_XBOW_LINKS 16
+
+typedef struct klxbow_s { /* XBOW */
+ klinfo_t xbow_info ;
+ klport_t xbow_port_info[MAX_XBOW_LINKS] ; /* Module number */
+ int xbow_master_hub_link;
+ /* type of brd connected+component struct ptr+flags */
+} klxbow_t ;
+
+#define MAX_PCI_SLOTS 8
+
+typedef struct klpci_device_s {
+ s32 pci_device_id; /* 32 bits of vendor/device ID. */
+ s32 pci_device_pad; /* 32 bits of padding. */
+} klpci_device_t;
+
+#define BRIDGE_STRUCT_VERSION 2
+
+typedef struct klbri_s { /* BRIDGE */
+ klinfo_t bri_info ;
+ unsigned char bri_eprominfo ; /* IO6prom connected to bridge */
+ unsigned char bri_bustype ; /* PCI/VME BUS bridge/GIO */
+ pci_t pci_specific ; /* PCI Board config info */
+ klpci_device_t bri_devices[MAX_PCI_DEVS] ; /* PCI IDs */
+ klconf_off_t bri_mfg_nic ;
+} klbri_t ;
+
+#define MAX_IOC3_TTY 2
+
+typedef struct klioc3_s { /* IOC3 */
+ klinfo_t ioc3_info ;
+ unsigned char ioc3_ssram ; /* Info about ssram */
+ unsigned char ioc3_nvram ; /* Info about nvram */
+ klinfo_t ioc3_superio ; /* Info about superio */
+ klconf_off_t ioc3_tty_off ;
+ klinfo_t ioc3_enet ;
+ klconf_off_t ioc3_enet_off ;
+ klconf_off_t ioc3_kbd_off ;
+} klioc3_t ;
+
+#define MAX_VME_SLOTS 8
+
+typedef struct klvmeb_s { /* VME BRIDGE - PCI CTLR */
+ klinfo_t vmeb_info ;
+ vmeb_t vmeb_specific ;
+ klconf_off_t vmeb_brdinfo[MAX_VME_SLOTS] ; /* VME Board config info */
+} klvmeb_t ;
+
+typedef struct klvmed_s { /* VME DEVICE - VME BOARD */
+ klinfo_t vmed_info ;
+ vmed_t vmed_specific ;
+ klconf_off_t vmed_brdinfo[MAX_VME_SLOTS] ; /* VME Board config info */
+} klvmed_t ;
+
+#define ROUTER_VECTOR_VERS 2
+
+/* XXX - Don't we need the number of ports here?!? */
+typedef struct klrou_s { /* ROUTER */
+ klinfo_t rou_info ;
+ unsigned int rou_flags ; /* PCFG_ROUTER_xxx flags */
+ nic_t rou_box_nic ; /* nic of the containing module */
+ klport_t rou_port[MAX_ROUTER_PORTS + 1] ; /* array index 1 to 6 */
+ klconf_off_t rou_mfg_nic ; /* MFG NIC string */
+ u64 rou_vector; /* vector from master node */
+} klrou_t ;
+
+/*
+ * Graphics Controller/Device
+ *
+ * (IP27/IO6) Prom versions 6.13 (and 6.5.1 kernels) and earlier
+ * used a couple different structures to store graphics information.
+ * For compatibility reasons, the newer data structure preserves some
+ * of the layout so that fields that are used in the old versions remain
+ * in the same place (with the same info). Determination of what version
+ * of this structure we have is done by checking the cookie field.
+ */
+#define KLGFX_COOKIE 0x0c0de000
+
+typedef struct klgfx_s { /* GRAPHICS Device */
+ klinfo_t gfx_info;
+ klconf_off_t old_gndevs; /* for compatibility with older proms */
+ klconf_off_t old_gdoff0; /* for compatibility with older proms */
+ unsigned int cookie; /* for compatibility with older proms */
+ unsigned int moduleslot;
+ struct klgfx_s *gfx_next_pipe;
+ graphics_t gfx_specific;
+ klconf_off_t pad0; /* for compatibility with older proms */
+ klconf_off_t gfx_mfg_nic;
+} klgfx_t;
+
+typedef struct klxthd_s {
+ klinfo_t xthd_info ;
+ klconf_off_t xthd_mfg_nic ; /* MFG NIC string */
+} klxthd_t ;
+
+typedef struct kltpu_s { /* TPU board */
+ klinfo_t tpu_info ;
+ klconf_off_t tpu_mfg_nic ; /* MFG NIC string */
+} kltpu_t ;
+
+typedef struct klgsn_s { /* GSN board */
+ klinfo_t gsn_info ;
+ klconf_off_t gsn_mfg_nic ; /* MFG NIC string */
+} klgsn_t ;
+
+#define MAX_SCSI_DEVS 16
+
+/*
+ * NOTE: THis is the max sized kl* structure and is used in klmalloc.c
+ * to allocate space of type COMPONENT. Make sure that if the size of
+ * any other component struct becomes more than this, then redefine
+ * that as the size to be klmalloced.
+ */
+
+typedef struct klscsi_s { /* SCSI Controller */
+ klinfo_t scsi_info ;
+ scsi_t scsi_specific ;
+ unsigned char scsi_numdevs ;
+ klconf_off_t scsi_devinfo[MAX_SCSI_DEVS] ;
+} klscsi_t ;
+
+typedef struct klscdev_s { /* SCSI device */
+ klinfo_t scdev_info ;
+ struct scsidisk_data *scdev_cfg ; /* driver fills up this */
+} klscdev_t ;
+
+typedef struct klttydev_s { /* TTY device */
+ klinfo_t ttydev_info ;
+ struct terminal_data *ttydev_cfg ; /* driver fills up this */
+} klttydev_t ;
+
+typedef struct klenetdev_s { /* ENET device */
+ klinfo_t enetdev_info ;
+ struct net_data *enetdev_cfg ; /* driver fills up this */
+} klenetdev_t ;
+
+typedef struct klkbddev_s { /* KBD device */
+ klinfo_t kbddev_info ;
+ struct keyboard_data *kbddev_cfg ; /* driver fills up this */
+} klkbddev_t ;
+
+typedef struct klmsdev_s { /* mouse device */
+ klinfo_t msdev_info ;
+ void *msdev_cfg ;
+} klmsdev_t ;
+
+#define MAX_FDDI_DEVS 10 /* XXX Is this true */
+
+typedef struct klfddi_s { /* FDDI */
+ klinfo_t fddi_info ;
+ fddi_t fddi_specific ;
+ klconf_off_t fddi_devinfo[MAX_FDDI_DEVS] ;
+} klfddi_t ;
+
+typedef struct klmio_s { /* MIO */
+ klinfo_t mio_info ;
+ mio_t mio_specific ;
+} klmio_t ;
+
+
+typedef union klcomp_s {
+ klcpu_t kc_cpu;
+ klhub_t kc_hub;
+ klmembnk_t kc_mem;
+ klxbow_t kc_xbow;
+ klbri_t kc_bri;
+ klioc3_t kc_ioc3;
+ klvmeb_t kc_vmeb;
+ klvmed_t kc_vmed;
+ klrou_t kc_rou;
+ klgfx_t kc_gfx;
+ klscsi_t kc_scsi;
+ klscdev_t kc_scsi_dev;
+ klfddi_t kc_fddi;
+ klmio_t kc_mio;
+ klmod_serial_num_t kc_snum ;
+} klcomp_t;
+
+typedef union kldev_s { /* for device structure allocation */
+ klscdev_t kc_scsi_dev ;
+ klttydev_t kc_tty_dev ;
+ klenetdev_t kc_enet_dev ;
+ klkbddev_t kc_kbd_dev ;
+} kldev_t ;
+
+/* Data structure interface routines. TBD */
+
+/* Include launch info in this file itself? TBD */
+
+/*
+ * TBD - Can the ARCS and device driver related info also be included in the
+ * KLCONFIG area. On the IO4PROM, prom device driver info is part of cfgnode_t
+ * structure, viz private to the IO4prom.
+ */
+
+/*
+ * TBD - Allocation issues.
+ *
+ * Do we need to Mark off sepatate heaps for lboard_t, rboard_t, component,
+ * errinfo and allocate from them, or have a single heap and allocate all
+ * structures from it. Debug is easier in the former method since we can
+ * dump all similar structs in one command, but there will be lots of holes,
+ * in memory and max limits are needed for number of structures.
+ * Another way to make it organized, is to have a union of all components
+ * and allocate a aligned chunk of memory greater than the biggest
+ * component.
+ */
+
+typedef union {
+ lboard_t *lbinfo ;
+} biptr_t ;
+
+
+#define BRI_PER_XBOW 6
+#define PCI_PER_BRI 8
+#define DEV_PER_PCI 16
+
+
+/* Virtual dipswitch values (starting from switch "7"): */
+
+#define VDS_NOGFX 0x8000 /* Don't enable gfx and autoboot */
+#define VDS_NOMP 0x100 /* Don't start slave processors */
+#define VDS_MANUMODE 0x80 /* Manufacturing mode */
+#define VDS_NOARB 0x40 /* No bootmaster arbitration */
+#define VDS_PODMODE 0x20 /* Go straight to POD mode */
+#define VDS_NO_DIAGS 0x10 /* Don't run any diags after BM arb */
+#define VDS_DEFAULTS 0x08 /* Use default environment values */
+#define VDS_NOMEMCLEAR 0x04 /* Don't run mem cfg code */
+#define VDS_2ND_IO4 0x02 /* Boot from the second IO4 */
+#define VDS_DEBUG_PROM 0x01 /* Print PROM debugging messages */
+
+/* external declarations of Linux kernel functions. */
+
+extern lboard_t *find_lboard(lboard_t *start, unsigned char type);
+extern klinfo_t *find_component(lboard_t *brd, klinfo_t *kli, unsigned char type);
+extern klinfo_t *find_first_component(lboard_t *brd, unsigned char type);
+extern klcpu_t *nasid_slice_to_cpuinfo(nasid_t, int);
+extern lboard_t *find_lboard_class(lboard_t *start, unsigned char brd_class);
+
+
+extern klcpu_t *sn_get_cpuinfo(cpuid_t cpu);
+
+#endif /* _ASM_SN_KLCONFIG_H */
Code Review / kvmfornfv.git / blobdiff