--- /dev/null
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1999,2001-2006 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/kdev_t.h>
+#include <linux/string.h>
+#include <linux/screen_info.h>
+#include <linux/console.h>
+#include <linux/timex.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/mm.h>
+#include <linux/serial.h>
+#include <linux/irq.h>
+#include <linux/bootmem.h>
+#include <linux/mmzone.h>
+#include <linux/interrupt.h>
+#include <linux/acpi.h>
+#include <linux/compiler.h>
+#include <linux/root_dev.h>
+#include <linux/nodemask.h>
+#include <linux/pm.h>
+#include <linux/efi.h>
+
+#include <asm/io.h>
+#include <asm/sal.h>
+#include <asm/machvec.h>
+#include <asm/processor.h>
+#include <asm/vga.h>
+#include <asm/setup.h>
+#include <asm/sn/arch.h>
+#include <asm/sn/addrs.h>
+#include <asm/sn/pda.h>
+#include <asm/sn/nodepda.h>
+#include <asm/sn/sn_cpuid.h>
+#include <asm/sn/simulator.h>
+#include <asm/sn/leds.h>
+#include <asm/sn/bte.h>
+#include <asm/sn/shub_mmr.h>
+#include <asm/sn/clksupport.h>
+#include <asm/sn/sn_sal.h>
+#include <asm/sn/geo.h>
+#include <asm/sn/sn_feature_sets.h>
+#include "xtalk/xwidgetdev.h"
+#include "xtalk/hubdev.h"
+#include <asm/sn/klconfig.h>
+
+
+DEFINE_PER_CPU(struct pda_s, pda_percpu);
+
+#define MAX_PHYS_MEMORY (1UL << IA64_MAX_PHYS_BITS) /* Max physical address supported */
+
+extern void bte_init_node(nodepda_t *, cnodeid_t);
+
+extern void sn_timer_init(void);
+extern unsigned long last_time_offset;
+extern void (*ia64_mark_idle) (int);
+extern void snidle(int);
+
+unsigned long sn_rtc_cycles_per_second;
+EXPORT_SYMBOL(sn_rtc_cycles_per_second);
+
+DEFINE_PER_CPU(struct sn_hub_info_s, __sn_hub_info);
+EXPORT_PER_CPU_SYMBOL(__sn_hub_info);
+
+DEFINE_PER_CPU(short, __sn_cnodeid_to_nasid[MAX_COMPACT_NODES]);
+EXPORT_PER_CPU_SYMBOL(__sn_cnodeid_to_nasid);
+
+DEFINE_PER_CPU(struct nodepda_s *, __sn_nodepda);
+EXPORT_PER_CPU_SYMBOL(__sn_nodepda);
+
+char sn_system_serial_number_string[128];
+EXPORT_SYMBOL(sn_system_serial_number_string);
+u64 sn_partition_serial_number;
+EXPORT_SYMBOL(sn_partition_serial_number);
+u8 sn_partition_id;
+EXPORT_SYMBOL(sn_partition_id);
+u8 sn_system_size;
+EXPORT_SYMBOL(sn_system_size);
+u8 sn_sharing_domain_size;
+EXPORT_SYMBOL(sn_sharing_domain_size);
+u8 sn_coherency_id;
+EXPORT_SYMBOL(sn_coherency_id);
+u8 sn_region_size;
+EXPORT_SYMBOL(sn_region_size);
+int sn_prom_type; /* 0=hardware, 1=medusa/realprom, 2=medusa/fakeprom */
+
+short physical_node_map[MAX_NUMALINK_NODES];
+static unsigned long sn_prom_features[MAX_PROM_FEATURE_SETS];
+
+EXPORT_SYMBOL(physical_node_map);
+
+int num_cnodes;
+
+static void sn_init_pdas(char **);
+static void build_cnode_tables(void);
+
+static nodepda_t *nodepdaindr[MAX_COMPACT_NODES];
+
+/*
+ * The format of "screen_info" is strange, and due to early i386-setup
+ * code. This is just enough to make the console code think we're on a
+ * VGA color display.
+ */
+struct screen_info sn_screen_info = {
+ .orig_x = 0,
+ .orig_y = 0,
+ .orig_video_mode = 3,
+ .orig_video_cols = 80,
+ .orig_video_ega_bx = 3,
+ .orig_video_lines = 25,
+ .orig_video_isVGA = 1,
+ .orig_video_points = 16
+};
+
+/*
+ * This routine can only be used during init, since
+ * smp_boot_data is an init data structure.
+ * We have to use smp_boot_data.cpu_phys_id to find
+ * the physical id of the processor because the normal
+ * cpu_physical_id() relies on data structures that
+ * may not be initialized yet.
+ */
+
+static int __init pxm_to_nasid(int pxm)
+{
+ int i;
+ int nid;
+
+ nid = pxm_to_node(pxm);
+ for (i = 0; i < num_node_memblks; i++) {
+ if (node_memblk[i].nid == nid) {
+ return NASID_GET(node_memblk[i].start_paddr);
+ }
+ }
+ return -1;
+}
+
+/**
+ * early_sn_setup - early setup routine for SN platforms
+ *
+ * Sets up an initial console to aid debugging. Intended primarily
+ * for bringup. See start_kernel() in init/main.c.
+ */
+
+void __init early_sn_setup(void)
+{
+ efi_system_table_t *efi_systab;
+ efi_config_table_t *config_tables;
+ struct ia64_sal_systab *sal_systab;
+ struct ia64_sal_desc_entry_point *ep;
+ char *p;
+ int i, j;
+
+ /*
+ * Parse enough of the SAL tables to locate the SAL entry point. Since, console
+ * IO on SN2 is done via SAL calls, early_printk won't work without this.
+ *
+ * This code duplicates some of the ACPI table parsing that is in efi.c & sal.c.
+ * Any changes to those file may have to be made here as well.
+ */
+ efi_systab = (efi_system_table_t *) __va(ia64_boot_param->efi_systab);
+ config_tables = __va(efi_systab->tables);
+ for (i = 0; i < efi_systab->nr_tables; i++) {
+ if (efi_guidcmp(config_tables[i].guid, SAL_SYSTEM_TABLE_GUID) ==
+ 0) {
+ sal_systab = __va(config_tables[i].table);
+ p = (char *)(sal_systab + 1);
+ for (j = 0; j < sal_systab->entry_count; j++) {
+ if (*p == SAL_DESC_ENTRY_POINT) {
+ ep = (struct ia64_sal_desc_entry_point
+ *)p;
+ ia64_sal_handler_init(__va
+ (ep->sal_proc),
+ __va(ep->gp));
+ return;
+ }
+ p += SAL_DESC_SIZE(*p);
+ }
+ }
+ }
+ /* Uh-oh, SAL not available?? */
+ printk(KERN_ERR "failed to find SAL entry point\n");
+}
+
+extern int platform_intr_list[];
+static int shub_1_1_found;
+
+/*
+ * sn_check_for_wars
+ *
+ * Set flag for enabling shub specific wars
+ */
+
+static inline int is_shub_1_1(int nasid)
+{
+ unsigned long id;
+ int rev;
+
+ if (is_shub2())
+ return 0;
+ id = REMOTE_HUB_L(nasid, SH1_SHUB_ID);
+ rev = (id & SH1_SHUB_ID_REVISION_MASK) >> SH1_SHUB_ID_REVISION_SHFT;
+ return rev <= 2;
+}
+
+static void sn_check_for_wars(void)
+{
+ int cnode;
+
+ if (is_shub2()) {
+ /* none yet */
+ } else {
+ for_each_online_node(cnode) {
+ if (is_shub_1_1(cnodeid_to_nasid(cnode)))
+ shub_1_1_found = 1;
+ }
+ }
+}
+
+/*
+ * Scan the EFI PCDP table (if it exists) for an acceptable VGA console
+ * output device. If one exists, pick it and set sn_legacy_{io,mem} to
+ * reflect the bus offsets needed to address it.
+ *
+ * Since pcdp support in SN is not supported in the 2.4 kernel (or at least
+ * the one lbs is based on) just declare the needed structs here.
+ *
+ * Reference spec http://www.dig64.org/specifications/DIG64_PCDPv20.pdf
+ *
+ * Returns 0 if no acceptable vga is found, !0 otherwise.
+ *
+ * Note: This stuff is duped here because Altix requires the PCDP to
+ * locate a usable VGA device due to lack of proper ACPI support. Structures
+ * could be used from drivers/firmware/pcdp.h, but it was decided that moving
+ * this file to a more public location just for Altix use was undesirable.
+ */
+
+struct hcdp_uart_desc {
+ u8 pad[45];
+};
+
+struct pcdp {
+ u8 signature[4]; /* should be 'HCDP' */
+ u32 length;
+ u8 rev; /* should be >=3 for pcdp, <3 for hcdp */
+ u8 sum;
+ u8 oem_id[6];
+ u64 oem_tableid;
+ u32 oem_rev;
+ u32 creator_id;
+ u32 creator_rev;
+ u32 num_type0;
+ struct hcdp_uart_desc uart[0]; /* num_type0 of these */
+ /* pcdp descriptors follow */
+} __attribute__((packed));
+
+struct pcdp_device_desc {
+ u8 type;
+ u8 primary;
+ u16 length;
+ u16 index;
+ /* interconnect specific structure follows */
+ /* device specific structure follows that */
+} __attribute__((packed));
+
+struct pcdp_interface_pci {
+ u8 type; /* 1 == pci */
+ u8 reserved;
+ u16 length;
+ u8 segment;
+ u8 bus;
+ u8 dev;
+ u8 fun;
+ u16 devid;
+ u16 vendid;
+ u32 acpi_interrupt;
+ u64 mmio_tra;
+ u64 ioport_tra;
+ u8 flags;
+ u8 translation;
+} __attribute__((packed));
+
+struct pcdp_vga_device {
+ u8 num_eas_desc;
+ /* ACPI Extended Address Space Desc follows */
+} __attribute__((packed));
+
+/* from pcdp_device_desc.primary */
+#define PCDP_PRIMARY_CONSOLE 0x01
+
+/* from pcdp_device_desc.type */
+#define PCDP_CONSOLE_INOUT 0x0
+#define PCDP_CONSOLE_DEBUG 0x1
+#define PCDP_CONSOLE_OUT 0x2
+#define PCDP_CONSOLE_IN 0x3
+#define PCDP_CONSOLE_TYPE_VGA 0x8
+
+#define PCDP_CONSOLE_VGA (PCDP_CONSOLE_TYPE_VGA | PCDP_CONSOLE_OUT)
+
+/* from pcdp_interface_pci.type */
+#define PCDP_IF_PCI 1
+
+/* from pcdp_interface_pci.translation */
+#define PCDP_PCI_TRANS_IOPORT 0x02
+#define PCDP_PCI_TRANS_MMIO 0x01
+
+#if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE)
+static void
+sn_scan_pcdp(void)
+{
+ u8 *bp;
+ struct pcdp *pcdp;
+ struct pcdp_device_desc device;
+ struct pcdp_interface_pci if_pci;
+ extern struct efi efi;
+
+ if (efi.hcdp == EFI_INVALID_TABLE_ADDR)
+ return; /* no hcdp/pcdp table */
+
+ pcdp = __va(efi.hcdp);
+
+ if (pcdp->rev < 3)
+ return; /* only support PCDP (rev >= 3) */
+
+ for (bp = (u8 *)&pcdp->uart[pcdp->num_type0];
+ bp < (u8 *)pcdp + pcdp->length;
+ bp += device.length) {
+ memcpy(&device, bp, sizeof(device));
+ if (! (device.primary & PCDP_PRIMARY_CONSOLE))
+ continue; /* not primary console */
+
+ if (device.type != PCDP_CONSOLE_VGA)
+ continue; /* not VGA descriptor */
+
+ memcpy(&if_pci, bp+sizeof(device), sizeof(if_pci));
+ if (if_pci.type != PCDP_IF_PCI)
+ continue; /* not PCI interconnect */
+
+ if (if_pci.translation & PCDP_PCI_TRANS_IOPORT)
+ vga_console_iobase = if_pci.ioport_tra;
+
+ if (if_pci.translation & PCDP_PCI_TRANS_MMIO)
+ vga_console_membase =
+ if_pci.mmio_tra | __IA64_UNCACHED_OFFSET;
+
+ break; /* once we find the primary, we're done */
+ }
+}
+#endif
+
+static unsigned long sn2_rtc_initial;
+
+/**
+ * sn_setup - SN platform setup routine
+ * @cmdline_p: kernel command line
+ *
+ * Handles platform setup for SN machines. This includes determining
+ * the RTC frequency (via a SAL call), initializing secondary CPUs, and
+ * setting up per-node data areas. The console is also initialized here.
+ */
+void __init sn_setup(char **cmdline_p)
+{
+ long status, ticks_per_sec, drift;
+ u32 version = sn_sal_rev();
+ extern void sn_cpu_init(void);
+
+ sn2_rtc_initial = rtc_time();
+ ia64_sn_plat_set_error_handling_features(); // obsolete
+ ia64_sn_set_os_feature(OSF_MCA_SLV_TO_OS_INIT_SLV);
+ ia64_sn_set_os_feature(OSF_FEAT_LOG_SBES);
+ /*
+ * Note: The calls to notify the PROM of ACPI and PCI Segment
+ * support must be done prior to acpi_load_tables(), as
+ * an ACPI capable PROM will rebuild the DSDT as result
+ * of the call.
+ */
+ ia64_sn_set_os_feature(OSF_PCISEGMENT_ENABLE);
+ ia64_sn_set_os_feature(OSF_ACPI_ENABLE);
+
+ /* Load the new DSDT and SSDT tables into the global table list. */
+ acpi_table_init();
+
+#if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE)
+ /*
+ * Handle SN vga console.
+ *
+ * SN systems do not have enough ACPI table information
+ * being passed from prom to identify VGA adapters and the legacy
+ * addresses to access them. Until that is done, SN systems rely
+ * on the PCDP table to identify the primary VGA console if one
+ * exists.
+ *
+ * However, kernel PCDP support is optional, and even if it is built
+ * into the kernel, it will not be used if the boot cmdline contains
+ * console= directives.
+ *
+ * So, to work around this mess, we duplicate some of the PCDP code
+ * here so that the primary VGA console (as defined by PCDP) will
+ * work on SN systems even if a different console (e.g. serial) is
+ * selected on the boot line (or CONFIG_EFI_PCDP is off).
+ */
+
+ if (! vga_console_membase)
+ sn_scan_pcdp();
+
+ /*
+ * Setup legacy IO space.
+ * vga_console_iobase maps to PCI IO Space address 0 on the
+ * bus containing the VGA console.
+ */
+ if (vga_console_iobase) {
+ io_space[0].mmio_base =
+ (unsigned long) ioremap(vga_console_iobase, 0);
+ io_space[0].sparse = 0;
+ }
+
+ if (vga_console_membase) {
+ /* usable vga ... make tty0 the preferred default console */
+ if (!strstr(*cmdline_p, "console="))
+ add_preferred_console("tty", 0, NULL);
+ } else {
+ printk(KERN_DEBUG "SGI: Disabling VGA console\n");
+ if (!strstr(*cmdline_p, "console="))
+ add_preferred_console("ttySG", 0, NULL);
+#ifdef CONFIG_DUMMY_CONSOLE
+ conswitchp = &dummy_con;
+#else
+ conswitchp = NULL;
+#endif /* CONFIG_DUMMY_CONSOLE */
+ }
+#endif /* def(CONFIG_VT) && def(CONFIG_VGA_CONSOLE) */
+
+ MAX_DMA_ADDRESS = PAGE_OFFSET + MAX_PHYS_MEMORY;
+
+ /*
+ * Build the tables for managing cnodes.
+ */
+ build_cnode_tables();
+
+ status =
+ ia64_sal_freq_base(SAL_FREQ_BASE_REALTIME_CLOCK, &ticks_per_sec,
+ &drift);
+ if (status != 0 || ticks_per_sec < 100000) {
+ printk(KERN_WARNING
+ "unable to determine platform RTC clock frequency, guessing.\n");
+ /* PROM gives wrong value for clock freq. so guess */
+ sn_rtc_cycles_per_second = 1000000000000UL / 30000UL;
+ } else
+ sn_rtc_cycles_per_second = ticks_per_sec;
+
+ platform_intr_list[ACPI_INTERRUPT_CPEI] = IA64_CPE_VECTOR;
+
+ printk("SGI SAL version %x.%02x\n", version >> 8, version & 0x00FF);
+
+ /*
+ * we set the default root device to /dev/hda
+ * to make simulation easy
+ */
+ ROOT_DEV = Root_HDA1;
+
+ /*
+ * Create the PDAs and NODEPDAs for all the cpus.
+ */
+ sn_init_pdas(cmdline_p);
+
+ ia64_mark_idle = &snidle;
+
+ /*
+ * For the bootcpu, we do this here. All other cpus will make the
+ * call as part of cpu_init in slave cpu initialization.
+ */
+ sn_cpu_init();
+
+#ifdef CONFIG_SMP
+ init_smp_config();
+#endif
+ screen_info = sn_screen_info;
+
+ sn_timer_init();
+
+ /*
+ * set pm_power_off to a SAL call to allow
+ * sn machines to power off. The SAL call can be replaced
+ * by an ACPI interface call when ACPI is fully implemented
+ * for sn.
+ */
+ pm_power_off = ia64_sn_power_down;
+ current->thread.flags |= IA64_THREAD_MIGRATION;
+}
+
+/**
+ * sn_init_pdas - setup node data areas
+ *
+ * One time setup for Node Data Area. Called by sn_setup().
+ */
+static void __init sn_init_pdas(char **cmdline_p)
+{
+ cnodeid_t cnode;
+
+ /*
+ * Allocate & initialize the nodepda for each node.
+ */
+ for_each_online_node(cnode) {
+ nodepdaindr[cnode] =
+ alloc_bootmem_node(NODE_DATA(cnode), sizeof(nodepda_t));
+ memset(nodepdaindr[cnode]->phys_cpuid, -1,
+ sizeof(nodepdaindr[cnode]->phys_cpuid));
+ spin_lock_init(&nodepdaindr[cnode]->ptc_lock);
+ }
+
+ /*
+ * Allocate & initialize nodepda for TIOs. For now, put them on node 0.
+ */
+ for (cnode = num_online_nodes(); cnode < num_cnodes; cnode++)
+ nodepdaindr[cnode] =
+ alloc_bootmem_node(NODE_DATA(0), sizeof(nodepda_t));
+
+ /*
+ * Now copy the array of nodepda pointers to each nodepda.
+ */
+ for (cnode = 0; cnode < num_cnodes; cnode++)
+ memcpy(nodepdaindr[cnode]->pernode_pdaindr, nodepdaindr,
+ sizeof(nodepdaindr));
+
+ /*
+ * Set up IO related platform-dependent nodepda fields.
+ * The following routine actually sets up the hubinfo struct
+ * in nodepda.
+ */
+ for_each_online_node(cnode) {
+ bte_init_node(nodepdaindr[cnode], cnode);
+ }
+
+ /*
+ * Initialize the per node hubdev. This includes IO Nodes and
+ * headless/memless nodes.
+ */
+ for (cnode = 0; cnode < num_cnodes; cnode++) {
+ hubdev_init_node(nodepdaindr[cnode], cnode);
+ }
+}
+
+/**
+ * sn_cpu_init - initialize per-cpu data areas
+ * @cpuid: cpuid of the caller
+ *
+ * Called during cpu initialization on each cpu as it starts.
+ * Currently, initializes the per-cpu data area for SNIA.
+ * Also sets up a few fields in the nodepda. Also known as
+ * platform_cpu_init() by the ia64 machvec code.
+ */
+void sn_cpu_init(void)
+{
+ int cpuid;
+ int cpuphyid;
+ int nasid;
+ int subnode;
+ int slice;
+ int cnode;
+ int i;
+ static int wars_have_been_checked, set_cpu0_number;
+
+ cpuid = smp_processor_id();
+ if (cpuid == 0 && IS_MEDUSA()) {
+ if (ia64_sn_is_fake_prom())
+ sn_prom_type = 2;
+ else
+ sn_prom_type = 1;
+ printk(KERN_INFO "Running on medusa with %s PROM\n",
+ (sn_prom_type == 1) ? "real" : "fake");
+ }
+
+ memset(pda, 0, sizeof(*pda));
+ if (ia64_sn_get_sn_info(0, &sn_hub_info->shub2,
+ &sn_hub_info->nasid_bitmask,
+ &sn_hub_info->nasid_shift,
+ &sn_system_size, &sn_sharing_domain_size,
+ &sn_partition_id, &sn_coherency_id,
+ &sn_region_size))
+ BUG();
+ sn_hub_info->as_shift = sn_hub_info->nasid_shift - 2;
+
+ /*
+ * Don't check status. The SAL call is not supported on all PROMs
+ * but a failure is harmless.
+ * Architecturally, cpu_init is always called twice on cpu 0. We
+ * should set cpu_number on cpu 0 once.
+ */
+ if (cpuid == 0) {
+ if (!set_cpu0_number) {
+ (void) ia64_sn_set_cpu_number(cpuid);
+ set_cpu0_number = 1;
+ }
+ } else
+ (void) ia64_sn_set_cpu_number(cpuid);
+
+ /*
+ * The boot cpu makes this call again after platform initialization is
+ * complete.
+ */
+ if (nodepdaindr[0] == NULL)
+ return;
+
+ for (i = 0; i < MAX_PROM_FEATURE_SETS; i++)
+ if (ia64_sn_get_prom_feature_set(i, &sn_prom_features[i]) != 0)
+ break;
+
+ cpuphyid = get_sapicid();
+
+ if (ia64_sn_get_sapic_info(cpuphyid, &nasid, &subnode, &slice))
+ BUG();
+
+ for (i=0; i < MAX_NUMNODES; i++) {
+ if (nodepdaindr[i]) {
+ nodepdaindr[i]->phys_cpuid[cpuid].nasid = nasid;
+ nodepdaindr[i]->phys_cpuid[cpuid].slice = slice;
+ nodepdaindr[i]->phys_cpuid[cpuid].subnode = subnode;
+ }
+ }
+
+ cnode = nasid_to_cnodeid(nasid);
+
+ __this_cpu_write(__sn_nodepda, nodepdaindr[cnode]);
+
+ pda->led_address =
+ (typeof(pda->led_address)) (LED0 + (slice << LED_CPU_SHIFT));
+ pda->led_state = LED_ALWAYS_SET;
+ pda->hb_count = HZ / 2;
+ pda->hb_state = 0;
+ pda->idle_flag = 0;
+
+ if (cpuid != 0) {
+ /* copy cpu 0's sn_cnodeid_to_nasid table to this cpu's */
+ memcpy(sn_cnodeid_to_nasid,
+ (&per_cpu(__sn_cnodeid_to_nasid, 0)),
+ sizeof(__ia64_per_cpu_var(__sn_cnodeid_to_nasid)));
+ }
+
+ /*
+ * Check for WARs.
+ * Only needs to be done once, on BSP.
+ * Has to be done after loop above, because it uses this cpu's
+ * sn_cnodeid_to_nasid table which was just initialized if this
+ * isn't cpu 0.
+ * Has to be done before assignment below.
+ */
+ if (!wars_have_been_checked) {
+ sn_check_for_wars();
+ wars_have_been_checked = 1;
+ }
+ sn_hub_info->shub_1_1_found = shub_1_1_found;
+
+ /*
+ * Set up addresses of PIO/MEM write status registers.
+ */
+ {
+ u64 pio1[] = {SH1_PIO_WRITE_STATUS_0, 0, SH1_PIO_WRITE_STATUS_1, 0};
+ u64 pio2[] = {SH2_PIO_WRITE_STATUS_0, SH2_PIO_WRITE_STATUS_2,
+ SH2_PIO_WRITE_STATUS_1, SH2_PIO_WRITE_STATUS_3};
+ u64 *pio;
+ pio = is_shub1() ? pio1 : pio2;
+ pda->pio_write_status_addr =
+ (volatile unsigned long *)GLOBAL_MMR_ADDR(nasid, pio[slice]);
+ pda->pio_write_status_val = is_shub1() ? SH_PIO_WRITE_STATUS_PENDING_WRITE_COUNT_MASK : 0;
+ }
+
+ /*
+ * WAR addresses for SHUB 1.x.
+ */
+ if (local_node_data->active_cpu_count++ == 0 && is_shub1()) {
+ int buddy_nasid;
+ buddy_nasid =
+ cnodeid_to_nasid(numa_node_id() ==
+ num_online_nodes() - 1 ? 0 : numa_node_id() + 1);
+ pda->pio_shub_war_cam_addr =
+ (volatile unsigned long *)GLOBAL_MMR_ADDR(nasid,
+ SH1_PI_CAM_CONTROL);
+ }
+}
+
+/*
+ * Build tables for converting between NASIDs and cnodes.
+ */
+static inline int __init board_needs_cnode(int type)
+{
+ return (type == KLTYPE_SNIA || type == KLTYPE_TIO);
+}
+
+void __init build_cnode_tables(void)
+{
+ int nasid;
+ int node;
+ lboard_t *brd;
+
+ memset(physical_node_map, -1, sizeof(physical_node_map));
+ memset(sn_cnodeid_to_nasid, -1,
+ sizeof(__ia64_per_cpu_var(__sn_cnodeid_to_nasid)));
+
+ /*
+ * First populate the tables with C/M bricks. This ensures that
+ * cnode == node for all C & M bricks.
+ */
+ for_each_online_node(node) {
+ nasid = pxm_to_nasid(node_to_pxm(node));
+ sn_cnodeid_to_nasid[node] = nasid;
+ physical_node_map[nasid] = node;
+ }
+
+ /*
+ * num_cnodes is total number of C/M/TIO bricks. Because of the 256 node
+ * limit on the number of nodes, we can't use the generic node numbers
+ * for this. Note that num_cnodes is incremented below as TIOs or
+ * headless/memoryless nodes are discovered.
+ */
+ num_cnodes = num_online_nodes();
+
+ /* fakeprom does not support klgraph */
+ if (IS_RUNNING_ON_FAKE_PROM())
+ return;
+
+ /* Find TIOs & headless/memoryless nodes and add them to the tables */
+ for_each_online_node(node) {
+ kl_config_hdr_t *klgraph_header;
+ nasid = cnodeid_to_nasid(node);
+ klgraph_header = ia64_sn_get_klconfig_addr(nasid);
+ BUG_ON(klgraph_header == NULL);
+ brd = NODE_OFFSET_TO_LBOARD(nasid, klgraph_header->ch_board_info);
+ while (brd) {
+ if (board_needs_cnode(brd->brd_type) && physical_node_map[brd->brd_nasid] < 0) {
+ sn_cnodeid_to_nasid[num_cnodes] = brd->brd_nasid;
+ physical_node_map[brd->brd_nasid] = num_cnodes++;
+ }
+ brd = find_lboard_next(brd);
+ }
+ }
+}
+
+int
+nasid_slice_to_cpuid(int nasid, int slice)
+{
+ long cpu;
+
+ for (cpu = 0; cpu < nr_cpu_ids; cpu++)
+ if (cpuid_to_nasid(cpu) == nasid &&
+ cpuid_to_slice(cpu) == slice)
+ return cpu;
+
+ return -1;
+}
+
+int sn_prom_feature_available(int id)
+{
+ if (id >= BITS_PER_LONG * MAX_PROM_FEATURE_SETS)
+ return 0;
+ return test_bit(id, sn_prom_features);
+}
+
+void
+sn_kernel_launch_event(void)
+{
+ /* ignore status until we understand possible failure, if any*/
+ if (ia64_sn_kernel_launch_event())
+ printk(KERN_ERR "KEXEC is not supported in this PROM, Please update the PROM.\n");
+}
+EXPORT_SYMBOL(sn_prom_feature_available);
+
Code Review / kvmfornfv.git / blobdiff