--- /dev/null
+/* head-uc-fr555.S: FR555 uc-linux specific bits of initialisation
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/threads.h>
+#include <linux/linkage.h>
+#include <asm/ptrace.h>
+#include <asm/page.h>
+#include <asm/spr-regs.h>
+#include <asm/mb86943a.h>
+#include "head.inc"
+
+
+#define __551_DARS0 0xfeff0100
+#define __551_DARS1 0xfeff0104
+#define __551_DARS2 0xfeff0108
+#define __551_DARS3 0xfeff010c
+#define __551_DAMK0 0xfeff0110
+#define __551_DAMK1 0xfeff0114
+#define __551_DAMK2 0xfeff0118
+#define __551_DAMK3 0xfeff011c
+#define __551_LCR 0xfeff1100
+#define __551_LSBR 0xfeff1c00
+
+ __INIT
+ .balign 4
+
+###############################################################################
+#
+# describe the position and layout of the SDRAM controller registers
+#
+# ENTRY: EXIT:
+# GR5 - cacheline size
+# GR11 - displacement of 2nd SDRAM addr reg from GR14
+# GR12 - displacement of 3rd SDRAM addr reg from GR14
+# GR13 - displacement of 4th SDRAM addr reg from GR14
+# GR14 - address of 1st SDRAM addr reg
+# GR15 - amount to shift address by to match SDRAM addr reg
+# GR26 &__head_reference [saved]
+# GR30 LED address [saved]
+# CC0 - T if DARS0 is present
+# CC1 - T if DARS1 is present
+# CC2 - T if DARS2 is present
+# CC3 - T if DARS3 is present
+#
+###############################################################################
+ .globl __head_fr555_describe_sdram
+__head_fr555_describe_sdram:
+ sethi.p %hi(__551_DARS0),gr14
+ setlo %lo(__551_DARS0),gr14
+ setlos.p #__551_DARS1-__551_DARS0,gr11
+ setlos #__551_DARS2-__551_DARS0,gr12
+ setlos.p #__551_DARS3-__551_DARS0,gr13
+ setlos #64,gr5 ; cacheline size
+ setlos #20,gr15 ; amount to shift addr by
+ setlos #0x00ff,gr4
+ movgs gr4,cccr ; extant DARS/DAMK regs
+ bralr
+
+###############################################################################
+#
+# rearrange the bus controller registers
+#
+# ENTRY: EXIT:
+# GR26 &__head_reference [saved]
+# GR30 LED address revised LED address
+#
+###############################################################################
+ .globl __head_fr555_set_busctl
+__head_fr555_set_busctl:
+ LEDS 0x100f
+ sethi.p %hi(__551_LSBR),gr10
+ setlo %lo(__551_LSBR),gr10
+ sethi.p %hi(__551_LCR),gr11
+ setlo %lo(__551_LCR),gr11
+
+ # set the bus controller
+ sethi.p %hi(__region_CS1),gr4
+ setlo %lo(__region_CS1),gr4
+ sethi.p %hi(__region_CS1_M),gr5
+ setlo %lo(__region_CS1_M),gr5
+ sethi.p %hi(__region_CS1_C),gr6
+ setlo %lo(__region_CS1_C),gr6
+ sti gr4,@(gr10,#1*0x08)
+ sti gr5,@(gr10,#1*0x08+0x100)
+ sti gr6,@(gr11,#1*0x08)
+ sethi.p %hi(__region_CS2),gr4
+ setlo %lo(__region_CS2),gr4
+ sethi.p %hi(__region_CS2_M),gr5
+ setlo %lo(__region_CS2_M),gr5
+ sethi.p %hi(__region_CS2_C),gr6
+ setlo %lo(__region_CS2_C),gr6
+ sti gr4,@(gr10,#2*0x08)
+ sti gr5,@(gr10,#2*0x08+0x100)
+ sti gr6,@(gr11,#2*0x08)
+ sethi.p %hi(__region_CS3),gr4
+ setlo %lo(__region_CS3),gr4
+ sethi.p %hi(__region_CS3_M),gr5
+ setlo %lo(__region_CS3_M),gr5
+ sethi.p %hi(__region_CS3_C),gr6
+ setlo %lo(__region_CS3_C),gr6
+ sti gr4,@(gr10,#3*0x08)
+ sti gr5,@(gr10,#3*0x08+0x100)
+ sti gr6,@(gr11,#3*0x08)
+ sethi.p %hi(__region_CS4),gr4
+ setlo %lo(__region_CS4),gr4
+ sethi.p %hi(__region_CS4_M),gr5
+ setlo %lo(__region_CS4_M),gr5
+ sethi.p %hi(__region_CS4_C),gr6
+ setlo %lo(__region_CS4_C),gr6
+ sti gr4,@(gr10,#4*0x08)
+ sti gr5,@(gr10,#4*0x08+0x100)
+ sti gr6,@(gr11,#4*0x08)
+ sethi.p %hi(__region_CS5),gr4
+ setlo %lo(__region_CS5),gr4
+ sethi.p %hi(__region_CS5_M),gr5
+ setlo %lo(__region_CS5_M),gr5
+ sethi.p %hi(__region_CS5_C),gr6
+ setlo %lo(__region_CS5_C),gr6
+ sti gr4,@(gr10,#5*0x08)
+ sti gr5,@(gr10,#5*0x08+0x100)
+ sti gr6,@(gr11,#5*0x08)
+ sethi.p %hi(__region_CS6),gr4
+ setlo %lo(__region_CS6),gr4
+ sethi.p %hi(__region_CS6_M),gr5
+ setlo %lo(__region_CS6_M),gr5
+ sethi.p %hi(__region_CS6_C),gr6
+ setlo %lo(__region_CS6_C),gr6
+ sti gr4,@(gr10,#6*0x08)
+ sti gr5,@(gr10,#6*0x08+0x100)
+ sti gr6,@(gr11,#6*0x08)
+ sethi.p %hi(__region_CS7),gr4
+ setlo %lo(__region_CS7),gr4
+ sethi.p %hi(__region_CS7_M),gr5
+ setlo %lo(__region_CS7_M),gr5
+ sethi.p %hi(__region_CS7_C),gr6
+ setlo %lo(__region_CS7_C),gr6
+ sti gr4,@(gr10,#7*0x08)
+ sti gr5,@(gr10,#7*0x08+0x100)
+ sti gr6,@(gr11,#7*0x08)
+ membar
+ bar
+
+ # adjust LED bank address
+#ifdef CONFIG_MB93091_VDK
+ sethi.p %hi(LED_ADDR - 0x20000000 +__region_CS2),gr30
+ setlo %lo(LED_ADDR - 0x20000000 +__region_CS2),gr30
+#endif
+ bralr
+
+###############################################################################
+#
+# determine the total SDRAM size
+#
+# ENTRY: EXIT:
+# GR25 - SDRAM size
+# GR26 &__head_reference [saved]
+# GR30 LED address [saved]
+#
+###############################################################################
+ .globl __head_fr555_survey_sdram
+__head_fr555_survey_sdram:
+ sethi.p %hi(__551_DAMK0),gr11
+ setlo %lo(__551_DAMK0),gr11
+ sethi.p %hi(__551_DARS0),gr12
+ setlo %lo(__551_DARS0),gr12
+
+ sethi.p %hi(0xfff),gr17 ; unused SDRAM AMK value
+ setlo %lo(0xfff),gr17
+ setlos #0,gr25
+
+ ldi @(gr11,#0x00),gr6 ; DAMK0: bits 11:0 match addr 11:0
+ subcc gr6,gr17,gr0,icc0
+ beq icc0,#0,__head_no_DCS0
+ ldi @(gr12,#0x00),gr4 ; DARS0
+ add gr25,gr6,gr25
+ addi gr25,#1,gr25
+__head_no_DCS0:
+
+ ldi @(gr11,#0x04),gr6 ; DAMK1: bits 11:0 match addr 11:0
+ subcc gr6,gr17,gr0,icc0
+ beq icc0,#0,__head_no_DCS1
+ ldi @(gr12,#0x04),gr4 ; DARS1
+ add gr25,gr6,gr25
+ addi gr25,#1,gr25
+__head_no_DCS1:
+
+ ldi @(gr11,#0x8),gr6 ; DAMK2: bits 11:0 match addr 11:0
+ subcc gr6,gr17,gr0,icc0
+ beq icc0,#0,__head_no_DCS2
+ ldi @(gr12,#0x8),gr4 ; DARS2
+ add gr25,gr6,gr25
+ addi gr25,#1,gr25
+__head_no_DCS2:
+
+ ldi @(gr11,#0xc),gr6 ; DAMK3: bits 11:0 match addr 11:0
+ subcc gr6,gr17,gr0,icc0
+ beq icc0,#0,__head_no_DCS3
+ ldi @(gr12,#0xc),gr4 ; DARS3
+ add gr25,gr6,gr25
+ addi gr25,#1,gr25
+__head_no_DCS3:
+
+ slli gr25,#20,gr25 ; shift [11:0] -> [31:20]
+ bralr
+
+###############################################################################
+#
+# set the protection map with the I/DAMPR registers
+#
+# ENTRY: EXIT:
+# GR25 SDRAM size saved
+# GR30 LED address saved
+#
+###############################################################################
+ .globl __head_fr555_set_protection
+__head_fr555_set_protection:
+ movsg lr,gr27
+
+ sethi.p %hi(0xfff00000),gr11
+ setlo %lo(0xfff00000),gr11
+
+ # set the I/O region protection registers for FR555
+ sethi.p %hi(__region_IO),gr7
+ setlo %lo(__region_IO),gr7
+ ori gr7,#xAMPRx_SS_512Mb|xAMPRx_S_KERNEL|xAMPRx_C|xAMPRx_V,gr5
+ movgs gr0,iampr15
+ movgs gr0,iamlr15
+ movgs gr5,dampr15
+ movgs gr7,damlr15
+
+ # need to tile the remaining IAMPR/DAMPR registers to cover as much of the RAM as possible
+ # - start with the highest numbered registers
+ sethi.p %hi(__kernel_image_end),gr8
+ setlo %lo(__kernel_image_end),gr8
+ sethi.p %hi(32768),gr4 ; allow for a maximal allocator bitmap
+ setlo %lo(32768),gr4
+ add gr8,gr4,gr8
+ sethi.p %hi(1024*2048-1),gr4 ; round up to nearest 2MiB
+ setlo %lo(1024*2048-1),gr4
+ add.p gr8,gr4,gr8
+ not gr4,gr4
+ and gr8,gr4,gr8
+
+ sethi.p %hi(__page_offset),gr9
+ setlo %lo(__page_offset),gr9
+ add gr9,gr25,gr9
+
+ # GR8 = base of uncovered RAM
+ # GR9 = top of uncovered RAM
+ # GR11 - mask for DAMLR/IAMLR regs
+ #
+ call __head_split_region
+ movgs gr4,iampr14
+ movgs gr6,iamlr14
+ movgs gr5,dampr14
+ movgs gr7,damlr14
+ call __head_split_region
+ movgs gr4,iampr13
+ movgs gr6,iamlr13
+ movgs gr5,dampr13
+ movgs gr7,damlr13
+ call __head_split_region
+ movgs gr4,iampr12
+ movgs gr6,iamlr12
+ movgs gr5,dampr12
+ movgs gr7,damlr12
+ call __head_split_region
+ movgs gr4,iampr11
+ movgs gr6,iamlr11
+ movgs gr5,dampr11
+ movgs gr7,damlr11
+ call __head_split_region
+ movgs gr4,iampr10
+ movgs gr6,iamlr10
+ movgs gr5,dampr10
+ movgs gr7,damlr10
+ call __head_split_region
+ movgs gr4,iampr9
+ movgs gr6,iamlr9
+ movgs gr5,dampr9
+ movgs gr7,damlr9
+ call __head_split_region
+ movgs gr4,iampr8
+ movgs gr6,iamlr8
+ movgs gr5,dampr8
+ movgs gr7,damlr8
+
+ call __head_split_region
+ movgs gr4,iampr7
+ movgs gr6,iamlr7
+ movgs gr5,dampr7
+ movgs gr7,damlr7
+ call __head_split_region
+ movgs gr4,iampr6
+ movgs gr6,iamlr6
+ movgs gr5,dampr6
+ movgs gr7,damlr6
+ call __head_split_region
+ movgs gr4,iampr5
+ movgs gr6,iamlr5
+ movgs gr5,dampr5
+ movgs gr7,damlr5
+ call __head_split_region
+ movgs gr4,iampr4
+ movgs gr6,iamlr4
+ movgs gr5,dampr4
+ movgs gr7,damlr4
+ call __head_split_region
+ movgs gr4,iampr3
+ movgs gr6,iamlr3
+ movgs gr5,dampr3
+ movgs gr7,damlr3
+ call __head_split_region
+ movgs gr4,iampr2
+ movgs gr6,iamlr2
+ movgs gr5,dampr2
+ movgs gr7,damlr2
+ call __head_split_region
+ movgs gr4,iampr1
+ movgs gr6,iamlr1
+ movgs gr5,dampr1
+ movgs gr7,damlr1
+
+ # cover kernel core image with kernel-only segment
+ sethi.p %hi(__page_offset),gr8
+ setlo %lo(__page_offset),gr8
+ call __head_split_region
+
+#ifdef CONFIG_PROTECT_KERNEL
+ ori.p gr4,#xAMPRx_S_KERNEL,gr4
+ ori gr5,#xAMPRx_S_KERNEL,gr5
+#endif
+
+ movgs gr4,iampr0
+ movgs gr6,iamlr0
+ movgs gr5,dampr0
+ movgs gr7,damlr0
+ jmpl @(gr27,gr0)
Code Review / kvmfornfv.git / blobdiff