--- /dev/null
+/*
+ * Miscellaneous IOCTL commands for Dynamic Power Management Controller Driver
+ *
+ * Copyright (C) 2004-2009 Analog Device Inc.
+ *
+ * Licensed under the GPL-2
+ */
+
+#ifndef _BLACKFIN_DPMC_H_
+#define _BLACKFIN_DPMC_H_
+
+#ifdef __ASSEMBLY__
+#define PM_REG0 R7
+#define PM_REG1 R6
+#define PM_REG2 R5
+#define PM_REG3 R4
+#define PM_REG4 R3
+#define PM_REG5 R2
+#define PM_REG6 R1
+#define PM_REG7 R0
+#define PM_REG8 P5
+#define PM_REG9 P4
+#define PM_REG10 P3
+#define PM_REG11 P2
+#define PM_REG12 P1
+#define PM_REG13 P0
+
+#define PM_REGSET0 R7:7
+#define PM_REGSET1 R7:6
+#define PM_REGSET2 R7:5
+#define PM_REGSET3 R7:4
+#define PM_REGSET4 R7:3
+#define PM_REGSET5 R7:2
+#define PM_REGSET6 R7:1
+#define PM_REGSET7 R7:0
+#define PM_REGSET8 R7:0, P5:5
+#define PM_REGSET9 R7:0, P5:4
+#define PM_REGSET10 R7:0, P5:3
+#define PM_REGSET11 R7:0, P5:2
+#define PM_REGSET12 R7:0, P5:1
+#define PM_REGSET13 R7:0, P5:0
+
+#define _PM_PUSH(n, x, w, base) PM_REG##n = w[FP + ((x) - (base))];
+#define _PM_POP(n, x, w, base) w[FP + ((x) - (base))] = PM_REG##n;
+#define PM_PUSH_SYNC(n) [--sp] = (PM_REGSET##n);
+#define PM_POP_SYNC(n) (PM_REGSET##n) = [sp++];
+#define PM_PUSH(n, x) PM_REG##n = [FP++];
+#define PM_POP(n, x) [FP--] = PM_REG##n;
+#define PM_CORE_PUSH(n, x) _PM_PUSH(n, x, , COREMMR_BASE)
+#define PM_CORE_POP(n, x) _PM_POP(n, x, , COREMMR_BASE)
+#define PM_SYS_PUSH(n, x) _PM_PUSH(n, x, , SYSMMR_BASE)
+#define PM_SYS_POP(n, x) _PM_POP(n, x, , SYSMMR_BASE)
+#define PM_SYS_PUSH16(n, x) _PM_PUSH(n, x, w, SYSMMR_BASE)
+#define PM_SYS_POP16(n, x) _PM_POP(n, x, w, SYSMMR_BASE)
+
+ .macro bfin_init_pm_bench_cycles
+#ifdef CONFIG_BFIN_PM_WAKEUP_TIME_BENCH
+ R4 = 0;
+ CYCLES = R4;
+ CYCLES2 = R4;
+ R4 = SYSCFG;
+ BITSET(R4, 1);
+ SYSCFG = R4;
+#endif
+ .endm
+
+ .macro bfin_cpu_reg_save
+ /*
+ * Save the core regs early so we can blow them away when
+ * saving/restoring MMR states
+ */
+ [--sp] = (R7:0, P5:0);
+ [--sp] = fp;
+ [--sp] = usp;
+
+ [--sp] = i0;
+ [--sp] = i1;
+ [--sp] = i2;
+ [--sp] = i3;
+
+ [--sp] = m0;
+ [--sp] = m1;
+ [--sp] = m2;
+ [--sp] = m3;
+
+ [--sp] = l0;
+ [--sp] = l1;
+ [--sp] = l2;
+ [--sp] = l3;
+
+ [--sp] = b0;
+ [--sp] = b1;
+ [--sp] = b2;
+ [--sp] = b3;
+ [--sp] = a0.x;
+ [--sp] = a0.w;
+ [--sp] = a1.x;
+ [--sp] = a1.w;
+
+ [--sp] = LC0;
+ [--sp] = LC1;
+ [--sp] = LT0;
+ [--sp] = LT1;
+ [--sp] = LB0;
+ [--sp] = LB1;
+
+ /* We can't push RETI directly as that'll change IPEND[4] */
+ r7 = RETI;
+ [--sp] = RETS;
+ [--sp] = ASTAT;
+#ifndef CONFIG_BFIN_PM_WAKEUP_TIME_BENCH
+ [--sp] = CYCLES;
+ [--sp] = CYCLES2;
+#endif
+ [--sp] = SYSCFG;
+ [--sp] = RETX;
+ [--sp] = SEQSTAT;
+ [--sp] = r7;
+
+ /* Save first func arg in M3 */
+ M3 = R0;
+ .endm
+
+ .macro bfin_cpu_reg_restore
+ /* Restore Core Registers */
+ RETI = [sp++];
+ SEQSTAT = [sp++];
+ RETX = [sp++];
+ SYSCFG = [sp++];
+#ifndef CONFIG_BFIN_PM_WAKEUP_TIME_BENCH
+ CYCLES2 = [sp++];
+ CYCLES = [sp++];
+#endif
+ ASTAT = [sp++];
+ RETS = [sp++];
+
+ LB1 = [sp++];
+ LB0 = [sp++];
+ LT1 = [sp++];
+ LT0 = [sp++];
+ LC1 = [sp++];
+ LC0 = [sp++];
+
+ a1.w = [sp++];
+ a1.x = [sp++];
+ a0.w = [sp++];
+ a0.x = [sp++];
+ b3 = [sp++];
+ b2 = [sp++];
+ b1 = [sp++];
+ b0 = [sp++];
+
+ l3 = [sp++];
+ l2 = [sp++];
+ l1 = [sp++];
+ l0 = [sp++];
+
+ m3 = [sp++];
+ m2 = [sp++];
+ m1 = [sp++];
+ m0 = [sp++];
+
+ i3 = [sp++];
+ i2 = [sp++];
+ i1 = [sp++];
+ i0 = [sp++];
+
+ usp = [sp++];
+ fp = [sp++];
+ (R7:0, P5:0) = [sp++];
+
+ .endm
+
+ .macro bfin_sys_mmr_save
+ /* Save system MMRs */
+ FP.H = hi(SYSMMR_BASE);
+ FP.L = lo(SYSMMR_BASE);
+#ifdef SIC_IMASK0
+ PM_SYS_PUSH(0, SIC_IMASK0)
+ PM_SYS_PUSH(1, SIC_IMASK1)
+# ifdef SIC_IMASK2
+ PM_SYS_PUSH(2, SIC_IMASK2)
+# endif
+#else
+# ifdef SIC_IMASK
+ PM_SYS_PUSH(0, SIC_IMASK)
+# endif
+#endif
+
+#ifdef SIC_IAR0
+ PM_SYS_PUSH(3, SIC_IAR0)
+ PM_SYS_PUSH(4, SIC_IAR1)
+ PM_SYS_PUSH(5, SIC_IAR2)
+#endif
+#ifdef SIC_IAR3
+ PM_SYS_PUSH(6, SIC_IAR3)
+#endif
+#ifdef SIC_IAR4
+ PM_SYS_PUSH(7, SIC_IAR4)
+ PM_SYS_PUSH(8, SIC_IAR5)
+ PM_SYS_PUSH(9, SIC_IAR6)
+#endif
+#ifdef SIC_IAR7
+ PM_SYS_PUSH(10, SIC_IAR7)
+#endif
+#ifdef SIC_IAR8
+ PM_SYS_PUSH(11, SIC_IAR8)
+ PM_SYS_PUSH(12, SIC_IAR9)
+ PM_SYS_PUSH(13, SIC_IAR10)
+#endif
+ PM_PUSH_SYNC(13)
+#ifdef SIC_IAR11
+ PM_SYS_PUSH(0, SIC_IAR11)
+#endif
+
+#ifdef SIC_IWR
+ PM_SYS_PUSH(1, SIC_IWR)
+#endif
+#ifdef SIC_IWR0
+ PM_SYS_PUSH(1, SIC_IWR0)
+#endif
+#ifdef SIC_IWR1
+ PM_SYS_PUSH(2, SIC_IWR1)
+#endif
+#ifdef SIC_IWR2
+ PM_SYS_PUSH(3, SIC_IWR2)
+#endif
+
+#ifdef PINT0_ASSIGN
+ PM_SYS_PUSH(4, PINT0_MASK_SET)
+ PM_SYS_PUSH(5, PINT1_MASK_SET)
+ PM_SYS_PUSH(6, PINT2_MASK_SET)
+ PM_SYS_PUSH(7, PINT3_MASK_SET)
+ PM_SYS_PUSH(8, PINT0_ASSIGN)
+ PM_SYS_PUSH(9, PINT1_ASSIGN)
+ PM_SYS_PUSH(10, PINT2_ASSIGN)
+ PM_SYS_PUSH(11, PINT3_ASSIGN)
+ PM_SYS_PUSH(12, PINT0_INVERT_SET)
+ PM_SYS_PUSH(13, PINT1_INVERT_SET)
+ PM_PUSH_SYNC(13)
+ PM_SYS_PUSH(0, PINT2_INVERT_SET)
+ PM_SYS_PUSH(1, PINT3_INVERT_SET)
+ PM_SYS_PUSH(2, PINT0_EDGE_SET)
+ PM_SYS_PUSH(3, PINT1_EDGE_SET)
+ PM_SYS_PUSH(4, PINT2_EDGE_SET)
+ PM_SYS_PUSH(5, PINT3_EDGE_SET)
+#endif
+
+#ifdef SYSCR
+ PM_SYS_PUSH16(6, SYSCR)
+#endif
+
+#ifdef EBIU_AMGCTL
+ PM_SYS_PUSH16(7, EBIU_AMGCTL)
+ PM_SYS_PUSH(8, EBIU_AMBCTL0)
+ PM_SYS_PUSH(9, EBIU_AMBCTL1)
+#endif
+#ifdef EBIU_FCTL
+ PM_SYS_PUSH(10, EBIU_MBSCTL)
+ PM_SYS_PUSH(11, EBIU_MODE)
+ PM_SYS_PUSH(12, EBIU_FCTL)
+ PM_PUSH_SYNC(12)
+#else
+ PM_PUSH_SYNC(9)
+#endif
+ .endm
+
+
+ .macro bfin_sys_mmr_restore
+/* Restore System MMRs */
+ FP.H = hi(SYSMMR_BASE);
+ FP.L = lo(SYSMMR_BASE);
+
+#ifdef EBIU_FCTL
+ PM_POP_SYNC(12)
+ PM_SYS_POP(12, EBIU_FCTL)
+ PM_SYS_POP(11, EBIU_MODE)
+ PM_SYS_POP(10, EBIU_MBSCTL)
+#else
+ PM_POP_SYNC(9)
+#endif
+
+#ifdef EBIU_AMGCTL
+ PM_SYS_POP(9, EBIU_AMBCTL1)
+ PM_SYS_POP(8, EBIU_AMBCTL0)
+ PM_SYS_POP16(7, EBIU_AMGCTL)
+#endif
+
+#ifdef SYSCR
+ PM_SYS_POP16(6, SYSCR)
+#endif
+
+#ifdef PINT0_ASSIGN
+ PM_SYS_POP(5, PINT3_EDGE_SET)
+ PM_SYS_POP(4, PINT2_EDGE_SET)
+ PM_SYS_POP(3, PINT1_EDGE_SET)
+ PM_SYS_POP(2, PINT0_EDGE_SET)
+ PM_SYS_POP(1, PINT3_INVERT_SET)
+ PM_SYS_POP(0, PINT2_INVERT_SET)
+ PM_POP_SYNC(13)
+ PM_SYS_POP(13, PINT1_INVERT_SET)
+ PM_SYS_POP(12, PINT0_INVERT_SET)
+ PM_SYS_POP(11, PINT3_ASSIGN)
+ PM_SYS_POP(10, PINT2_ASSIGN)
+ PM_SYS_POP(9, PINT1_ASSIGN)
+ PM_SYS_POP(8, PINT0_ASSIGN)
+ PM_SYS_POP(7, PINT3_MASK_SET)
+ PM_SYS_POP(6, PINT2_MASK_SET)
+ PM_SYS_POP(5, PINT1_MASK_SET)
+ PM_SYS_POP(4, PINT0_MASK_SET)
+#endif
+
+#ifdef SIC_IWR2
+ PM_SYS_POP(3, SIC_IWR2)
+#endif
+#ifdef SIC_IWR1
+ PM_SYS_POP(2, SIC_IWR1)
+#endif
+#ifdef SIC_IWR0
+ PM_SYS_POP(1, SIC_IWR0)
+#endif
+#ifdef SIC_IWR
+ PM_SYS_POP(1, SIC_IWR)
+#endif
+
+#ifdef SIC_IAR11
+ PM_SYS_POP(0, SIC_IAR11)
+#endif
+ PM_POP_SYNC(13)
+#ifdef SIC_IAR8
+ PM_SYS_POP(13, SIC_IAR10)
+ PM_SYS_POP(12, SIC_IAR9)
+ PM_SYS_POP(11, SIC_IAR8)
+#endif
+#ifdef SIC_IAR7
+ PM_SYS_POP(10, SIC_IAR7)
+#endif
+#ifdef SIC_IAR6
+ PM_SYS_POP(9, SIC_IAR6)
+ PM_SYS_POP(8, SIC_IAR5)
+ PM_SYS_POP(7, SIC_IAR4)
+#endif
+#ifdef SIC_IAR3
+ PM_SYS_POP(6, SIC_IAR3)
+#endif
+#ifdef SIC_IAR0
+ PM_SYS_POP(5, SIC_IAR2)
+ PM_SYS_POP(4, SIC_IAR1)
+ PM_SYS_POP(3, SIC_IAR0)
+#endif
+#ifdef SIC_IMASK0
+# ifdef SIC_IMASK2
+ PM_SYS_POP(2, SIC_IMASK2)
+# endif
+ PM_SYS_POP(1, SIC_IMASK1)
+ PM_SYS_POP(0, SIC_IMASK0)
+#else
+# ifdef SIC_IMASK
+ PM_SYS_POP(0, SIC_IMASK)
+# endif
+#endif
+ .endm
+
+ .macro bfin_core_mmr_save
+ /* Save Core MMRs */
+ I0.H = hi(COREMMR_BASE);
+ I0.L = lo(COREMMR_BASE);
+ I1 = I0;
+ I2 = I0;
+ I3 = I0;
+ B0 = I0;
+ B1 = I0;
+ B2 = I0;
+ B3 = I0;
+ I1.L = lo(DCPLB_ADDR0);
+ I2.L = lo(DCPLB_DATA0);
+ I3.L = lo(ICPLB_ADDR0);
+ B0.L = lo(ICPLB_DATA0);
+ B1.L = lo(EVT2);
+ B2.L = lo(IMASK);
+ B3.L = lo(TCNTL);
+
+ /* Event Vectors */
+ FP = B1;
+ PM_PUSH(0, EVT2)
+ PM_PUSH(1, EVT3)
+ FP += 4; /* EVT4 */
+ PM_PUSH(2, EVT5)
+ PM_PUSH(3, EVT6)
+ PM_PUSH(4, EVT7)
+ PM_PUSH(5, EVT8)
+ PM_PUSH_SYNC(5)
+
+ PM_PUSH(0, EVT9)
+ PM_PUSH(1, EVT10)
+ PM_PUSH(2, EVT11)
+ PM_PUSH(3, EVT12)
+ PM_PUSH(4, EVT13)
+ PM_PUSH(5, EVT14)
+ PM_PUSH(6, EVT15)
+
+ /* CEC */
+ FP = B2;
+ PM_PUSH(7, IMASK)
+ FP += 4; /* IPEND */
+ PM_PUSH(8, ILAT)
+ PM_PUSH(9, IPRIO)
+
+ /* Core Timer */
+ FP = B3;
+ PM_PUSH(10, TCNTL)
+ PM_PUSH(11, TPERIOD)
+ PM_PUSH(12, TSCALE)
+ PM_PUSH(13, TCOUNT)
+ PM_PUSH_SYNC(13)
+
+ /* Misc non-contiguous registers */
+ FP = I0;
+ PM_CORE_PUSH(0, DMEM_CONTROL);
+ PM_CORE_PUSH(1, IMEM_CONTROL);
+ PM_CORE_PUSH(2, TBUFCTL);
+ PM_PUSH_SYNC(2)
+
+ /* DCPLB Addr */
+ FP = I1;
+ PM_PUSH(0, DCPLB_ADDR0)
+ PM_PUSH(1, DCPLB_ADDR1)
+ PM_PUSH(2, DCPLB_ADDR2)
+ PM_PUSH(3, DCPLB_ADDR3)
+ PM_PUSH(4, DCPLB_ADDR4)
+ PM_PUSH(5, DCPLB_ADDR5)
+ PM_PUSH(6, DCPLB_ADDR6)
+ PM_PUSH(7, DCPLB_ADDR7)
+ PM_PUSH(8, DCPLB_ADDR8)
+ PM_PUSH(9, DCPLB_ADDR9)
+ PM_PUSH(10, DCPLB_ADDR10)
+ PM_PUSH(11, DCPLB_ADDR11)
+ PM_PUSH(12, DCPLB_ADDR12)
+ PM_PUSH(13, DCPLB_ADDR13)
+ PM_PUSH_SYNC(13)
+ PM_PUSH(0, DCPLB_ADDR14)
+ PM_PUSH(1, DCPLB_ADDR15)
+
+ /* DCPLB Data */
+ FP = I2;
+ PM_PUSH(2, DCPLB_DATA0)
+ PM_PUSH(3, DCPLB_DATA1)
+ PM_PUSH(4, DCPLB_DATA2)
+ PM_PUSH(5, DCPLB_DATA3)
+ PM_PUSH(6, DCPLB_DATA4)
+ PM_PUSH(7, DCPLB_DATA5)
+ PM_PUSH(8, DCPLB_DATA6)
+ PM_PUSH(9, DCPLB_DATA7)
+ PM_PUSH(10, DCPLB_DATA8)
+ PM_PUSH(11, DCPLB_DATA9)
+ PM_PUSH(12, DCPLB_DATA10)
+ PM_PUSH(13, DCPLB_DATA11)
+ PM_PUSH_SYNC(13)
+ PM_PUSH(0, DCPLB_DATA12)
+ PM_PUSH(1, DCPLB_DATA13)
+ PM_PUSH(2, DCPLB_DATA14)
+ PM_PUSH(3, DCPLB_DATA15)
+
+ /* ICPLB Addr */
+ FP = I3;
+ PM_PUSH(4, ICPLB_ADDR0)
+ PM_PUSH(5, ICPLB_ADDR1)
+ PM_PUSH(6, ICPLB_ADDR2)
+ PM_PUSH(7, ICPLB_ADDR3)
+ PM_PUSH(8, ICPLB_ADDR4)
+ PM_PUSH(9, ICPLB_ADDR5)
+ PM_PUSH(10, ICPLB_ADDR6)
+ PM_PUSH(11, ICPLB_ADDR7)
+ PM_PUSH(12, ICPLB_ADDR8)
+ PM_PUSH(13, ICPLB_ADDR9)
+ PM_PUSH_SYNC(13)
+ PM_PUSH(0, ICPLB_ADDR10)
+ PM_PUSH(1, ICPLB_ADDR11)
+ PM_PUSH(2, ICPLB_ADDR12)
+ PM_PUSH(3, ICPLB_ADDR13)
+ PM_PUSH(4, ICPLB_ADDR14)
+ PM_PUSH(5, ICPLB_ADDR15)
+
+ /* ICPLB Data */
+ FP = B0;
+ PM_PUSH(6, ICPLB_DATA0)
+ PM_PUSH(7, ICPLB_DATA1)
+ PM_PUSH(8, ICPLB_DATA2)
+ PM_PUSH(9, ICPLB_DATA3)
+ PM_PUSH(10, ICPLB_DATA4)
+ PM_PUSH(11, ICPLB_DATA5)
+ PM_PUSH(12, ICPLB_DATA6)
+ PM_PUSH(13, ICPLB_DATA7)
+ PM_PUSH_SYNC(13)
+ PM_PUSH(0, ICPLB_DATA8)
+ PM_PUSH(1, ICPLB_DATA9)
+ PM_PUSH(2, ICPLB_DATA10)
+ PM_PUSH(3, ICPLB_DATA11)
+ PM_PUSH(4, ICPLB_DATA12)
+ PM_PUSH(5, ICPLB_DATA13)
+ PM_PUSH(6, ICPLB_DATA14)
+ PM_PUSH(7, ICPLB_DATA15)
+ PM_PUSH_SYNC(7)
+ .endm
+
+ .macro bfin_core_mmr_restore
+ /* Restore Core MMRs */
+ I0.H = hi(COREMMR_BASE);
+ I0.L = lo(COREMMR_BASE);
+ I1 = I0;
+ I2 = I0;
+ I3 = I0;
+ B0 = I0;
+ B1 = I0;
+ B2 = I0;
+ B3 = I0;
+ I1.L = lo(DCPLB_ADDR15);
+ I2.L = lo(DCPLB_DATA15);
+ I3.L = lo(ICPLB_ADDR15);
+ B0.L = lo(ICPLB_DATA15);
+ B1.L = lo(EVT15);
+ B2.L = lo(IPRIO);
+ B3.L = lo(TCOUNT);
+
+ /* ICPLB Data */
+ FP = B0;
+ PM_POP_SYNC(7)
+ PM_POP(7, ICPLB_DATA15)
+ PM_POP(6, ICPLB_DATA14)
+ PM_POP(5, ICPLB_DATA13)
+ PM_POP(4, ICPLB_DATA12)
+ PM_POP(3, ICPLB_DATA11)
+ PM_POP(2, ICPLB_DATA10)
+ PM_POP(1, ICPLB_DATA9)
+ PM_POP(0, ICPLB_DATA8)
+ PM_POP_SYNC(13)
+ PM_POP(13, ICPLB_DATA7)
+ PM_POP(12, ICPLB_DATA6)
+ PM_POP(11, ICPLB_DATA5)
+ PM_POP(10, ICPLB_DATA4)
+ PM_POP(9, ICPLB_DATA3)
+ PM_POP(8, ICPLB_DATA2)
+ PM_POP(7, ICPLB_DATA1)
+ PM_POP(6, ICPLB_DATA0)
+
+ /* ICPLB Addr */
+ FP = I3;
+ PM_POP(5, ICPLB_ADDR15)
+ PM_POP(4, ICPLB_ADDR14)
+ PM_POP(3, ICPLB_ADDR13)
+ PM_POP(2, ICPLB_ADDR12)
+ PM_POP(1, ICPLB_ADDR11)
+ PM_POP(0, ICPLB_ADDR10)
+ PM_POP_SYNC(13)
+ PM_POP(13, ICPLB_ADDR9)
+ PM_POP(12, ICPLB_ADDR8)
+ PM_POP(11, ICPLB_ADDR7)
+ PM_POP(10, ICPLB_ADDR6)
+ PM_POP(9, ICPLB_ADDR5)
+ PM_POP(8, ICPLB_ADDR4)
+ PM_POP(7, ICPLB_ADDR3)
+ PM_POP(6, ICPLB_ADDR2)
+ PM_POP(5, ICPLB_ADDR1)
+ PM_POP(4, ICPLB_ADDR0)
+
+ /* DCPLB Data */
+ FP = I2;
+ PM_POP(3, DCPLB_DATA15)
+ PM_POP(2, DCPLB_DATA14)
+ PM_POP(1, DCPLB_DATA13)
+ PM_POP(0, DCPLB_DATA12)
+ PM_POP_SYNC(13)
+ PM_POP(13, DCPLB_DATA11)
+ PM_POP(12, DCPLB_DATA10)
+ PM_POP(11, DCPLB_DATA9)
+ PM_POP(10, DCPLB_DATA8)
+ PM_POP(9, DCPLB_DATA7)
+ PM_POP(8, DCPLB_DATA6)
+ PM_POP(7, DCPLB_DATA5)
+ PM_POP(6, DCPLB_DATA4)
+ PM_POP(5, DCPLB_DATA3)
+ PM_POP(4, DCPLB_DATA2)
+ PM_POP(3, DCPLB_DATA1)
+ PM_POP(2, DCPLB_DATA0)
+
+ /* DCPLB Addr */
+ FP = I1;
+ PM_POP(1, DCPLB_ADDR15)
+ PM_POP(0, DCPLB_ADDR14)
+ PM_POP_SYNC(13)
+ PM_POP(13, DCPLB_ADDR13)
+ PM_POP(12, DCPLB_ADDR12)
+ PM_POP(11, DCPLB_ADDR11)
+ PM_POP(10, DCPLB_ADDR10)
+ PM_POP(9, DCPLB_ADDR9)
+ PM_POP(8, DCPLB_ADDR8)
+ PM_POP(7, DCPLB_ADDR7)
+ PM_POP(6, DCPLB_ADDR6)
+ PM_POP(5, DCPLB_ADDR5)
+ PM_POP(4, DCPLB_ADDR4)
+ PM_POP(3, DCPLB_ADDR3)
+ PM_POP(2, DCPLB_ADDR2)
+ PM_POP(1, DCPLB_ADDR1)
+ PM_POP(0, DCPLB_ADDR0)
+
+
+ /* Misc non-contiguous registers */
+
+ /* icache & dcache will enable later
+ drop IMEM_CONTROL, DMEM_CONTROL pop
+ */
+ FP = I0;
+ PM_POP_SYNC(2)
+ PM_CORE_POP(2, TBUFCTL)
+ PM_CORE_POP(1, IMEM_CONTROL)
+ PM_CORE_POP(0, DMEM_CONTROL)
+
+ /* Core Timer */
+ FP = B3;
+ R0 = 0x1;
+ [FP - 0xC] = R0;
+
+ PM_POP_SYNC(13)
+ FP = B3;
+ PM_POP(13, TCOUNT)
+ PM_POP(12, TSCALE)
+ PM_POP(11, TPERIOD)
+ PM_POP(10, TCNTL)
+
+ /* CEC */
+ FP = B2;
+ PM_POP(9, IPRIO)
+ PM_POP(8, ILAT)
+ FP += -4; /* IPEND */
+ PM_POP(7, IMASK)
+
+ /* Event Vectors */
+ FP = B1;
+ PM_POP(6, EVT15)
+ PM_POP(5, EVT14)
+ PM_POP(4, EVT13)
+ PM_POP(3, EVT12)
+ PM_POP(2, EVT11)
+ PM_POP(1, EVT10)
+ PM_POP(0, EVT9)
+ PM_POP_SYNC(5)
+ PM_POP(5, EVT8)
+ PM_POP(4, EVT7)
+ PM_POP(3, EVT6)
+ PM_POP(2, EVT5)
+ FP += -4; /* EVT4 */
+ PM_POP(1, EVT3)
+ PM_POP(0, EVT2)
+ .endm
+#endif
+
+#include <mach/pll.h>
+
+/* PLL_CTL Masks */
+#define DF 0x0001 /* 0: PLL = CLKIN, 1: PLL = CLKIN/2 */
+#define PLL_OFF 0x0002 /* PLL Not Powered */
+#define STOPCK 0x0008 /* Core Clock Off */
+#define PDWN 0x0020 /* Enter Deep Sleep Mode */
+#ifdef __ADSPBF539__
+# define IN_DELAY 0x0014 /* Add 200ps Delay To EBIU Input Latches */
+# define OUT_DELAY 0x00C0 /* Add 200ps Delay To EBIU Output Signals */
+#else
+# define IN_DELAY 0x0040 /* Add 200ps Delay To EBIU Input Latches */
+# define OUT_DELAY 0x0080 /* Add 200ps Delay To EBIU Output Signals */
+#endif
+#define BYPASS 0x0100 /* Bypass the PLL */
+#define MSEL 0x7E00 /* Multiplier Select For CCLK/VCO Factors */
+#define SPORT_HYST 0x8000 /* Enable Additional Hysteresis on SPORT Input Pins */
+#define SET_MSEL(x) (((x)&0x3F) << 0x9) /* Set MSEL = 0-63 --> VCO = CLKIN*MSEL */
+
+/* PLL_DIV Masks */
+#define SSEL 0x000F /* System Select */
+#define CSEL 0x0030 /* Core Select */
+#define CSEL_DIV1 0x0000 /* CCLK = VCO / 1 */
+#define CSEL_DIV2 0x0010 /* CCLK = VCO / 2 */
+#define CSEL_DIV4 0x0020 /* CCLK = VCO / 4 */
+#define CSEL_DIV8 0x0030 /* CCLK = VCO / 8 */
+
+#define CCLK_DIV1 CSEL_DIV1
+#define CCLK_DIV2 CSEL_DIV2
+#define CCLK_DIV4 CSEL_DIV4
+#define CCLK_DIV8 CSEL_DIV8
+
+#define SET_SSEL(x) ((x) & 0xF) /* Set SSEL = 0-15 --> SCLK = VCO/SSEL */
+#define SCLK_DIV(x) (x) /* SCLK = VCO / x */
+
+/* PLL_STAT Masks */
+#define ACTIVE_PLLENABLED 0x0001 /* Processor In Active Mode With PLL Enabled */
+#define FULL_ON 0x0002 /* Processor In Full On Mode */
+#define ACTIVE_PLLDISABLED 0x0004 /* Processor In Active Mode With PLL Disabled */
+#define PLL_LOCKED 0x0020 /* PLL_LOCKCNT Has Been Reached */
+
+#define RTCWS 0x0400 /* RTC/Reset Wake-Up Status */
+#define CANWS 0x0800 /* CAN Wake-Up Status */
+#define USBWS 0x2000 /* USB Wake-Up Status */
+#define KPADWS 0x4000 /* Keypad Wake-Up Status */
+#define ROTWS 0x8000 /* Rotary Wake-Up Status */
+#define GPWS 0x1000 /* General-Purpose Wake-Up Status */
+
+/* VR_CTL Masks */
+#if defined(__ADSPBF52x__) || defined(__ADSPBF51x__)
+#define FREQ 0x3000 /* Switching Oscillator Frequency For Regulator */
+#define FREQ_1000 0x3000 /* Switching Frequency Is 1 MHz */
+#else
+#define FREQ 0x0003 /* Switching Oscillator Frequency For Regulator */
+#define FREQ_333 0x0001 /* Switching Frequency Is 333 kHz */
+#define FREQ_667 0x0002 /* Switching Frequency Is 667 kHz */
+#define FREQ_1000 0x0003 /* Switching Frequency Is 1 MHz */
+#endif
+#define HIBERNATE 0x0000 /* Powerdown/Bypass On-Board Regulation */
+
+#define GAIN 0x000C /* Voltage Level Gain */
+#define GAIN_5 0x0000 /* GAIN = 5 */
+#define GAIN_10 0x0004 /* GAIN = 1 */
+#define GAIN_20 0x0008 /* GAIN = 2 */
+#define GAIN_50 0x000C /* GAIN = 5 */
+
+#define VLEV 0x00F0 /* Internal Voltage Level */
+#ifdef __ADSPBF52x__
+#define VLEV_085 0x0040 /* VLEV = 0.85 V (-5% - +10% Accuracy) */
+#define VLEV_090 0x0050 /* VLEV = 0.90 V (-5% - +10% Accuracy) */
+#define VLEV_095 0x0060 /* VLEV = 0.95 V (-5% - +10% Accuracy) */
+#define VLEV_100 0x0070 /* VLEV = 1.00 V (-5% - +10% Accuracy) */
+#define VLEV_105 0x0080 /* VLEV = 1.05 V (-5% - +10% Accuracy) */
+#define VLEV_110 0x0090 /* VLEV = 1.10 V (-5% - +10% Accuracy) */
+#define VLEV_115 0x00A0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */
+#define VLEV_120 0x00B0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */
+#else
+#define VLEV_085 0x0060 /* VLEV = 0.85 V (-5% - +10% Accuracy) */
+#define VLEV_090 0x0070 /* VLEV = 0.90 V (-5% - +10% Accuracy) */
+#define VLEV_095 0x0080 /* VLEV = 0.95 V (-5% - +10% Accuracy) */
+#define VLEV_100 0x0090 /* VLEV = 1.00 V (-5% - +10% Accuracy) */
+#define VLEV_105 0x00A0 /* VLEV = 1.05 V (-5% - +10% Accuracy) */
+#define VLEV_110 0x00B0 /* VLEV = 1.10 V (-5% - +10% Accuracy) */
+#define VLEV_115 0x00C0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */
+#define VLEV_120 0x00D0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */
+#define VLEV_125 0x00E0 /* VLEV = 1.25 V (-5% - +10% Accuracy) */
+#define VLEV_130 0x00F0 /* VLEV = 1.30 V (-5% - +10% Accuracy) */
+#endif
+
+#ifdef CONFIG_BF60x
+#define PA15WE 0x00000001 /* Allow Wake-Up from PA15 */
+#define PB15WE 0x00000002 /* Allow Wake-Up from PB15 */
+#define PC15WE 0x00000004 /* Allow Wake-Up from PC15 */
+#define PD06WE 0x00000008 /* Allow Wake-Up from PD06(ETH0_PHYINT) */
+#define PE12WE 0x00000010 /* Allow Wake-Up from PE12(ETH1_PHYINT, PUSH BUTTON) */
+#define PG04WE 0x00000020 /* Allow Wake-Up from PG04(CAN0_RX) */
+#define PG13WE 0x00000040 /* Allow Wake-Up from PG13 */
+#define USBWE 0x00000080 /* Allow Wake-Up from (USB) */
+#else
+#define WAKE 0x0100 /* Enable RTC/Reset Wakeup From Hibernate */
+#define CANWE 0x0200 /* Enable CAN Wakeup From Hibernate */
+#define PHYWE 0x0400 /* Enable PHY Wakeup From Hibernate */
+#define GPWE 0x0400 /* General-Purpose Wake-Up Enable */
+#define MXVRWE 0x0400 /* Enable MXVR Wakeup From Hibernate */
+#define KPADWE 0x1000 /* Keypad Wake-Up Enable */
+#define ROTWE 0x2000 /* Rotary Wake-Up Enable */
+#define CLKBUFOE 0x4000 /* CLKIN Buffer Output Enable */
+#define SCKELOW 0x8000 /* Do Not Drive SCKE High During Reset After Hibernate */
+
+#if defined(__ADSPBF52x__) || defined(__ADSPBF51x__)
+#define USBWE 0x0200 /* Enable USB Wakeup From Hibernate */
+#else
+#define USBWE 0x0800 /* Enable USB Wakeup From Hibernate */
+#endif
+#endif
+
+#ifndef __ASSEMBLY__
+
+void sleep_mode(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2);
+void sleep_deeper(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2);
+void do_hibernate(int wakeup);
+void set_dram_srfs(void);
+void unset_dram_srfs(void);
+
+#define VRPAIR(vlev, freq) (((vlev) << 16) | ((freq) >> 16))
+
+#ifdef CONFIG_CPU_FREQ
+#define CPUFREQ_CPU 0
+#endif
+struct bfin_dpmc_platform_data {
+ const unsigned int *tuple_tab;
+ unsigned short tabsize;
+ unsigned short vr_settling_time; /* in us */
+};
+
+#endif
+
+#endif /*_BLACKFIN_DPMC_H_*/
Code Review / kvmfornfv.git / blobdiff