--- /dev/null
+/*
+ * Copyright (C) 2013 ARM Ltd.
+ * Copyright (C) 2013 Linaro.
+ *
+ * This code is based on glibc cortex strings work originally authored by Linaro
+ * and re-licensed under GPLv2 for the Linux kernel. The original code can
+ * be found @
+ *
+ * http://bazaar.launchpad.net/~linaro-toolchain-dev/cortex-strings/trunk/
+ * files/head:/src/aarch64/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/cache.h>
+
+/*
+ * Copy a buffer from src to dest (alignment handled by the hardware)
+ *
+ * Parameters:
+ * x0 - dest
+ * x1 - src
+ * x2 - n
+ * Returns:
+ * x0 - dest
+ */
+dstin .req x0
+src .req x1
+count .req x2
+tmp1 .req x3
+tmp1w .req w3
+tmp2 .req x4
+tmp2w .req w4
+tmp3 .req x5
+tmp3w .req w5
+dst .req x6
+
+A_l .req x7
+A_h .req x8
+B_l .req x9
+B_h .req x10
+C_l .req x11
+C_h .req x12
+D_l .req x13
+D_h .req x14
+
+ENTRY(memcpy)
+ mov dst, dstin
+ cmp count, #16
+ /*When memory length is less than 16, the accessed are not aligned.*/
+ b.lo .Ltiny15
+
+ neg tmp2, src
+ ands tmp2, tmp2, #15/* Bytes to reach alignment. */
+ b.eq .LSrcAligned
+ sub count, count, tmp2
+ /*
+ * Copy the leading memory data from src to dst in an increasing
+ * address order.By this way,the risk of overwritting the source
+ * memory data is eliminated when the distance between src and
+ * dst is less than 16. The memory accesses here are alignment.
+ */
+ tbz tmp2, #0, 1f
+ ldrb tmp1w, [src], #1
+ strb tmp1w, [dst], #1
+1:
+ tbz tmp2, #1, 2f
+ ldrh tmp1w, [src], #2
+ strh tmp1w, [dst], #2
+2:
+ tbz tmp2, #2, 3f
+ ldr tmp1w, [src], #4
+ str tmp1w, [dst], #4
+3:
+ tbz tmp2, #3, .LSrcAligned
+ ldr tmp1, [src],#8
+ str tmp1, [dst],#8
+
+.LSrcAligned:
+ cmp count, #64
+ b.ge .Lcpy_over64
+ /*
+ * Deal with small copies quickly by dropping straight into the
+ * exit block.
+ */
+.Ltail63:
+ /*
+ * Copy up to 48 bytes of data. At this point we only need the
+ * bottom 6 bits of count to be accurate.
+ */
+ ands tmp1, count, #0x30
+ b.eq .Ltiny15
+ cmp tmp1w, #0x20
+ b.eq 1f
+ b.lt 2f
+ ldp A_l, A_h, [src], #16
+ stp A_l, A_h, [dst], #16
+1:
+ ldp A_l, A_h, [src], #16
+ stp A_l, A_h, [dst], #16
+2:
+ ldp A_l, A_h, [src], #16
+ stp A_l, A_h, [dst], #16
+.Ltiny15:
+ /*
+ * Prefer to break one ldp/stp into several load/store to access
+ * memory in an increasing address order,rather than to load/store 16
+ * bytes from (src-16) to (dst-16) and to backward the src to aligned
+ * address,which way is used in original cortex memcpy. If keeping
+ * the original memcpy process here, memmove need to satisfy the
+ * precondition that src address is at least 16 bytes bigger than dst
+ * address,otherwise some source data will be overwritten when memove
+ * call memcpy directly. To make memmove simpler and decouple the
+ * memcpy's dependency on memmove, withdrew the original process.
+ */
+ tbz count, #3, 1f
+ ldr tmp1, [src], #8
+ str tmp1, [dst], #8
+1:
+ tbz count, #2, 2f
+ ldr tmp1w, [src], #4
+ str tmp1w, [dst], #4
+2:
+ tbz count, #1, 3f
+ ldrh tmp1w, [src], #2
+ strh tmp1w, [dst], #2
+3:
+ tbz count, #0, .Lexitfunc
+ ldrb tmp1w, [src]
+ strb tmp1w, [dst]
+
+.Lexitfunc:
+ ret
+
+.Lcpy_over64:
+ subs count, count, #128
+ b.ge .Lcpy_body_large
+ /*
+ * Less than 128 bytes to copy, so handle 64 here and then jump
+ * to the tail.
+ */
+ ldp A_l, A_h, [src],#16
+ stp A_l, A_h, [dst],#16
+ ldp B_l, B_h, [src],#16
+ ldp C_l, C_h, [src],#16
+ stp B_l, B_h, [dst],#16
+ stp C_l, C_h, [dst],#16
+ ldp D_l, D_h, [src],#16
+ stp D_l, D_h, [dst],#16
+
+ tst count, #0x3f
+ b.ne .Ltail63
+ ret
+
+ /*
+ * Critical loop. Start at a new cache line boundary. Assuming
+ * 64 bytes per line this ensures the entire loop is in one line.
+ */
+ .p2align L1_CACHE_SHIFT
+.Lcpy_body_large:
+ /* pre-get 64 bytes data. */
+ ldp A_l, A_h, [src],#16
+ ldp B_l, B_h, [src],#16
+ ldp C_l, C_h, [src],#16
+ ldp D_l, D_h, [src],#16
+1:
+ /*
+ * interlace the load of next 64 bytes data block with store of the last
+ * loaded 64 bytes data.
+ */
+ stp A_l, A_h, [dst],#16
+ ldp A_l, A_h, [src],#16
+ stp B_l, B_h, [dst],#16
+ ldp B_l, B_h, [src],#16
+ stp C_l, C_h, [dst],#16
+ ldp C_l, C_h, [src],#16
+ stp D_l, D_h, [dst],#16
+ ldp D_l, D_h, [src],#16
+ subs count, count, #64
+ b.ge 1b
+ stp A_l, A_h, [dst],#16
+ stp B_l, B_h, [dst],#16
+ stp C_l, C_h, [dst],#16
+ stp D_l, D_h, [dst],#16
+
+ tst count, #0x3f
+ b.ne .Ltail63
+ ret
+ENDPROC(memcpy)
Code Review / kvmfornfv.git / blobdiff