--- /dev/null
+/*
+ * linux/arch/arm/mm/proc-xscale.S
+ *
+ * Author: Nicolas Pitre
+ * Created: November 2000
+ * Copyright: (C) 2000, 2001 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * MMU functions for the Intel XScale CPUs
+ *
+ * 2001 Aug 21:
+ * some contributions by Brett Gaines <brett.w.gaines@intel.com>
+ * Copyright 2001 by Intel Corp.
+ *
+ * 2001 Sep 08:
+ * Completely revisited, many important fixes
+ * Nicolas Pitre <nico@fluxnic.net>
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/assembler.h>
+#include <asm/hwcap.h>
+#include <asm/pgtable.h>
+#include <asm/pgtable-hwdef.h>
+#include <asm/page.h>
+#include <asm/ptrace.h>
+#include "proc-macros.S"
+
+/*
+ * This is the maximum size of an area which will be flushed. If the area
+ * is larger than this, then we flush the whole cache
+ */
+#define MAX_AREA_SIZE 32768
+
+/*
+ * the cache line size of the I and D cache
+ */
+#define CACHELINESIZE 32
+
+/*
+ * the size of the data cache
+ */
+#define CACHESIZE 32768
+
+/*
+ * Virtual address used to allocate the cache when flushed
+ *
+ * This must be an address range which is _never_ used. It should
+ * apparently have a mapping in the corresponding page table for
+ * compatibility with future CPUs that _could_ require it. For instance we
+ * don't care.
+ *
+ * This must be aligned on a 2*CACHESIZE boundary. The code selects one of
+ * the 2 areas in alternance each time the clean_d_cache macro is used.
+ * Without this the XScale core exhibits cache eviction problems and no one
+ * knows why.
+ *
+ * Reminder: the vector table is located at 0xffff0000-0xffff0fff.
+ */
+#define CLEAN_ADDR 0xfffe0000
+
+/*
+ * This macro is used to wait for a CP15 write and is needed
+ * when we have to ensure that the last operation to the co-pro
+ * was completed before continuing with operation.
+ */
+ .macro cpwait, rd
+ mrc p15, 0, \rd, c2, c0, 0 @ arbitrary read of cp15
+ mov \rd, \rd @ wait for completion
+ sub pc, pc, #4 @ flush instruction pipeline
+ .endm
+
+ .macro cpwait_ret, lr, rd
+ mrc p15, 0, \rd, c2, c0, 0 @ arbitrary read of cp15
+ sub pc, \lr, \rd, LSR #32 @ wait for completion and
+ @ flush instruction pipeline
+ .endm
+
+/*
+ * This macro cleans the entire dcache using line allocate.
+ * The main loop has been unrolled to reduce loop overhead.
+ * rd and rs are two scratch registers.
+ */
+ .macro clean_d_cache, rd, rs
+ ldr \rs, =clean_addr
+ ldr \rd, [\rs]
+ eor \rd, \rd, #CACHESIZE
+ str \rd, [\rs]
+ add \rs, \rd, #CACHESIZE
+1: mcr p15, 0, \rd, c7, c2, 5 @ allocate D cache line
+ add \rd, \rd, #CACHELINESIZE
+ mcr p15, 0, \rd, c7, c2, 5 @ allocate D cache line
+ add \rd, \rd, #CACHELINESIZE
+ mcr p15, 0, \rd, c7, c2, 5 @ allocate D cache line
+ add \rd, \rd, #CACHELINESIZE
+ mcr p15, 0, \rd, c7, c2, 5 @ allocate D cache line
+ add \rd, \rd, #CACHELINESIZE
+ teq \rd, \rs
+ bne 1b
+ .endm
+
+ .data
+clean_addr: .word CLEAN_ADDR
+
+ .text
+
+/*
+ * cpu_xscale_proc_init()
+ *
+ * Nothing too exciting at the moment
+ */
+ENTRY(cpu_xscale_proc_init)
+ @ enable write buffer coalescing. Some bootloader disable it
+ mrc p15, 0, r1, c1, c0, 1
+ bic r1, r1, #1
+ mcr p15, 0, r1, c1, c0, 1
+ ret lr
+
+/*
+ * cpu_xscale_proc_fin()
+ */
+ENTRY(cpu_xscale_proc_fin)
+ mrc p15, 0, r0, c1, c0, 0 @ ctrl register
+ bic r0, r0, #0x1800 @ ...IZ...........
+ bic r0, r0, #0x0006 @ .............CA.
+ mcr p15, 0, r0, c1, c0, 0 @ disable caches
+ ret lr
+
+/*
+ * cpu_xscale_reset(loc)
+ *
+ * Perform a soft reset of the system. Put the CPU into the
+ * same state as it would be if it had been reset, and branch
+ * to what would be the reset vector.
+ *
+ * loc: location to jump to for soft reset
+ *
+ * Beware PXA270 erratum E7.
+ */
+ .align 5
+ .pushsection .idmap.text, "ax"
+ENTRY(cpu_xscale_reset)
+ mov r1, #PSR_F_BIT|PSR_I_BIT|SVC_MODE
+ msr cpsr_c, r1 @ reset CPSR
+ mcr p15, 0, r1, c10, c4, 1 @ unlock I-TLB
+ mcr p15, 0, r1, c8, c5, 0 @ invalidate I-TLB
+ mrc p15, 0, r1, c1, c0, 0 @ ctrl register
+ bic r1, r1, #0x0086 @ ........B....CA.
+ bic r1, r1, #0x3900 @ ..VIZ..S........
+ sub pc, pc, #4 @ flush pipeline
+ @ *** cache line aligned ***
+ mcr p15, 0, r1, c1, c0, 0 @ ctrl register
+ bic r1, r1, #0x0001 @ ...............M
+ mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches & BTB
+ mcr p15, 0, r1, c1, c0, 0 @ ctrl register
+ @ CAUTION: MMU turned off from this point. We count on the pipeline
+ @ already containing those two last instructions to survive.
+ mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
+ ret r0
+ENDPROC(cpu_xscale_reset)
+ .popsection
+
+/*
+ * cpu_xscale_do_idle()
+ *
+ * Cause the processor to idle
+ *
+ * For now we do nothing but go to idle mode for every case
+ *
+ * XScale supports clock switching, but using idle mode support
+ * allows external hardware to react to system state changes.
+ */
+ .align 5
+
+ENTRY(cpu_xscale_do_idle)
+ mov r0, #1
+ mcr p14, 0, r0, c7, c0, 0 @ Go to IDLE
+ ret lr
+
+/* ================================= CACHE ================================ */
+
+/*
+ * flush_icache_all()
+ *
+ * Unconditionally clean and invalidate the entire icache.
+ */
+ENTRY(xscale_flush_icache_all)
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
+ ret lr
+ENDPROC(xscale_flush_icache_all)
+
+/*
+ * flush_user_cache_all()
+ *
+ * Invalidate all cache entries in a particular address
+ * space.
+ */
+ENTRY(xscale_flush_user_cache_all)
+ /* FALLTHROUGH */
+
+/*
+ * flush_kern_cache_all()
+ *
+ * Clean and invalidate the entire cache.
+ */
+ENTRY(xscale_flush_kern_cache_all)
+ mov r2, #VM_EXEC
+ mov ip, #0
+__flush_whole_cache:
+ clean_d_cache r0, r1
+ tst r2, #VM_EXEC
+ mcrne p15, 0, ip, c7, c5, 0 @ Invalidate I cache & BTB
+ mcrne p15, 0, ip, c7, c10, 4 @ Drain Write (& Fill) Buffer
+ ret lr
+
+/*
+ * flush_user_cache_range(start, end, vm_flags)
+ *
+ * Invalidate a range of cache entries in the specified
+ * address space.
+ *
+ * - start - start address (may not be aligned)
+ * - end - end address (exclusive, may not be aligned)
+ * - vma - vma_area_struct describing address space
+ */
+ .align 5
+ENTRY(xscale_flush_user_cache_range)
+ mov ip, #0
+ sub r3, r1, r0 @ calculate total size
+ cmp r3, #MAX_AREA_SIZE
+ bhs __flush_whole_cache
+
+1: tst r2, #VM_EXEC
+ mcrne p15, 0, r0, c7, c5, 1 @ Invalidate I cache line
+ mcr p15, 0, r0, c7, c10, 1 @ Clean D cache line
+ mcr p15, 0, r0, c7, c6, 1 @ Invalidate D cache line
+ add r0, r0, #CACHELINESIZE
+ cmp r0, r1
+ blo 1b
+ tst r2, #VM_EXEC
+ mcrne p15, 0, ip, c7, c5, 6 @ Invalidate BTB
+ mcrne p15, 0, ip, c7, c10, 4 @ Drain Write (& Fill) Buffer
+ ret lr
+
+/*
+ * coherent_kern_range(start, end)
+ *
+ * Ensure coherency between the Icache and the Dcache in the
+ * region described by start. If you have non-snooping
+ * Harvard caches, you need to implement this function.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ *
+ * Note: single I-cache line invalidation isn't used here since
+ * it also trashes the mini I-cache used by JTAG debuggers.
+ */
+ENTRY(xscale_coherent_kern_range)
+ bic r0, r0, #CACHELINESIZE - 1
+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ add r0, r0, #CACHELINESIZE
+ cmp r0, r1
+ blo 1b
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 0 @ Invalidate I cache & BTB
+ mcr p15, 0, r0, c7, c10, 4 @ Drain Write (& Fill) Buffer
+ ret lr
+
+/*
+ * coherent_user_range(start, end)
+ *
+ * Ensure coherency between the Icache and the Dcache in the
+ * region described by start. If you have non-snooping
+ * Harvard caches, you need to implement this function.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(xscale_coherent_user_range)
+ bic r0, r0, #CACHELINESIZE - 1
+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ mcr p15, 0, r0, c7, c5, 1 @ Invalidate I cache entry
+ add r0, r0, #CACHELINESIZE
+ cmp r0, r1
+ blo 1b
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 6 @ Invalidate BTB
+ mcr p15, 0, r0, c7, c10, 4 @ Drain Write (& Fill) Buffer
+ ret lr
+
+/*
+ * flush_kern_dcache_area(void *addr, size_t size)
+ *
+ * Ensure no D cache aliasing occurs, either with itself or
+ * the I cache
+ *
+ * - addr - kernel address
+ * - size - region size
+ */
+ENTRY(xscale_flush_kern_dcache_area)
+ add r1, r0, r1
+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
+ add r0, r0, #CACHELINESIZE
+ cmp r0, r1
+ blo 1b
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 0 @ Invalidate I cache & BTB
+ mcr p15, 0, r0, c7, c10, 4 @ Drain Write (& Fill) Buffer
+ ret lr
+
+/*
+ * dma_inv_range(start, end)
+ *
+ * Invalidate (discard) the specified virtual address range.
+ * May not write back any entries. If 'start' or 'end'
+ * are not cache line aligned, those lines must be written
+ * back.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+xscale_dma_inv_range:
+ tst r0, #CACHELINESIZE - 1
+ bic r0, r0, #CACHELINESIZE - 1
+ mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
+ tst r1, #CACHELINESIZE - 1
+ mcrne p15, 0, r1, c7, c10, 1 @ clean D entry
+1: mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
+ add r0, r0, #CACHELINESIZE
+ cmp r0, r1
+ blo 1b
+ mcr p15, 0, r0, c7, c10, 4 @ Drain Write (& Fill) Buffer
+ ret lr
+
+/*
+ * dma_clean_range(start, end)
+ *
+ * Clean the specified virtual address range.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+xscale_dma_clean_range:
+ bic r0, r0, #CACHELINESIZE - 1
+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ add r0, r0, #CACHELINESIZE
+ cmp r0, r1
+ blo 1b
+ mcr p15, 0, r0, c7, c10, 4 @ Drain Write (& Fill) Buffer
+ ret lr
+
+/*
+ * dma_flush_range(start, end)
+ *
+ * Clean and invalidate the specified virtual address range.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(xscale_dma_flush_range)
+ bic r0, r0, #CACHELINESIZE - 1
+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
+ add r0, r0, #CACHELINESIZE
+ cmp r0, r1
+ blo 1b
+ mcr p15, 0, r0, c7, c10, 4 @ Drain Write (& Fill) Buffer
+ ret lr
+
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(xscale_dma_map_area)
+ add r1, r1, r0
+ cmp r2, #DMA_TO_DEVICE
+ beq xscale_dma_clean_range
+ bcs xscale_dma_inv_range
+ b xscale_dma_flush_range
+ENDPROC(xscale_dma_map_area)
+
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(xscale_80200_A0_A1_dma_map_area)
+ add r1, r1, r0
+ teq r2, #DMA_TO_DEVICE
+ beq xscale_dma_clean_range
+ b xscale_dma_flush_range
+ENDPROC(xscale_80200_A0_A1_dma_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(xscale_dma_unmap_area)
+ ret lr
+ENDPROC(xscale_dma_unmap_area)
+
+ .globl xscale_flush_kern_cache_louis
+ .equ xscale_flush_kern_cache_louis, xscale_flush_kern_cache_all
+
+ @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
+ define_cache_functions xscale
+
+/*
+ * On stepping A0/A1 of the 80200, invalidating D-cache by line doesn't
+ * clear the dirty bits, which means that if we invalidate a dirty line,
+ * the dirty data can still be written back to external memory later on.
+ *
+ * The recommended workaround is to always do a clean D-cache line before
+ * doing an invalidate D-cache line, so on the affected processors,
+ * dma_inv_range() is implemented as dma_flush_range().
+ *
+ * See erratum #25 of "Intel 80200 Processor Specification Update",
+ * revision January 22, 2003, available at:
+ * http://www.intel.com/design/iio/specupdt/273415.htm
+ */
+.macro a0_alias basename
+ .globl xscale_80200_A0_A1_\basename
+ .type xscale_80200_A0_A1_\basename , %function
+ .equ xscale_80200_A0_A1_\basename , xscale_\basename
+.endm
+
+/*
+ * Most of the cache functions are unchanged for these processor revisions.
+ * Export suitable alias symbols for the unchanged functions:
+ */
+ a0_alias flush_icache_all
+ a0_alias flush_user_cache_all
+ a0_alias flush_kern_cache_all
+ a0_alias flush_kern_cache_louis
+ a0_alias flush_user_cache_range
+ a0_alias coherent_kern_range
+ a0_alias coherent_user_range
+ a0_alias flush_kern_dcache_area
+ a0_alias dma_flush_range
+ a0_alias dma_unmap_area
+
+ @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
+ define_cache_functions xscale_80200_A0_A1
+
+ENTRY(cpu_xscale_dcache_clean_area)
+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ add r0, r0, #CACHELINESIZE
+ subs r1, r1, #CACHELINESIZE
+ bhi 1b
+ ret lr
+
+/* =============================== PageTable ============================== */
+
+/*
+ * cpu_xscale_switch_mm(pgd)
+ *
+ * Set the translation base pointer to be as described by pgd.
+ *
+ * pgd: new page tables
+ */
+ .align 5
+ENTRY(cpu_xscale_switch_mm)
+ clean_d_cache r1, r2
+ mcr p15, 0, ip, c7, c5, 0 @ Invalidate I cache & BTB
+ mcr p15, 0, ip, c7, c10, 4 @ Drain Write (& Fill) Buffer
+ mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
+ mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
+ cpwait_ret lr, ip
+
+/*
+ * cpu_xscale_set_pte_ext(ptep, pte, ext)
+ *
+ * Set a PTE and flush it out
+ *
+ * Errata 40: must set memory to write-through for user read-only pages.
+ */
+cpu_xscale_mt_table:
+ .long 0x00 @ L_PTE_MT_UNCACHED
+ .long PTE_BUFFERABLE @ L_PTE_MT_BUFFERABLE
+ .long PTE_CACHEABLE @ L_PTE_MT_WRITETHROUGH
+ .long PTE_CACHEABLE | PTE_BUFFERABLE @ L_PTE_MT_WRITEBACK
+ .long PTE_EXT_TEX(1) | PTE_BUFFERABLE @ L_PTE_MT_DEV_SHARED
+ .long 0x00 @ unused
+ .long PTE_EXT_TEX(1) | PTE_CACHEABLE @ L_PTE_MT_MINICACHE
+ .long PTE_EXT_TEX(1) | PTE_CACHEABLE | PTE_BUFFERABLE @ L_PTE_MT_WRITEALLOC
+ .long 0x00 @ unused
+ .long PTE_BUFFERABLE @ L_PTE_MT_DEV_WC
+ .long 0x00 @ unused
+ .long PTE_CACHEABLE | PTE_BUFFERABLE @ L_PTE_MT_DEV_CACHED
+ .long 0x00 @ L_PTE_MT_DEV_NONSHARED
+ .long 0x00 @ unused
+ .long 0x00 @ unused
+ .long 0x00 @ unused
+
+ .align 5
+ENTRY(cpu_xscale_set_pte_ext)
+ xscale_set_pte_ext_prologue
+
+ @
+ @ Erratum 40: must set memory to write-through for user read-only pages
+ @
+ and ip, r1, #(L_PTE_MT_MASK | L_PTE_USER | L_PTE_RDONLY) & ~(4 << 2)
+ teq ip, #L_PTE_MT_WRITEBACK | L_PTE_USER | L_PTE_RDONLY
+
+ moveq r1, #L_PTE_MT_WRITETHROUGH
+ and r1, r1, #L_PTE_MT_MASK
+ adr ip, cpu_xscale_mt_table
+ ldr ip, [ip, r1]
+ bic r2, r2, #0x0c
+ orr r2, r2, ip
+
+ xscale_set_pte_ext_epilogue
+ ret lr
+
+ .ltorg
+ .align
+
+.globl cpu_xscale_suspend_size
+.equ cpu_xscale_suspend_size, 4 * 6
+#ifdef CONFIG_ARM_CPU_SUSPEND
+ENTRY(cpu_xscale_do_suspend)
+ stmfd sp!, {r4 - r9, lr}
+ mrc p14, 0, r4, c6, c0, 0 @ clock configuration, for turbo mode
+ mrc p15, 0, r5, c15, c1, 0 @ CP access reg
+ mrc p15, 0, r6, c13, c0, 0 @ PID
+ mrc p15, 0, r7, c3, c0, 0 @ domain ID
+ mrc p15, 0, r8, c1, c0, 1 @ auxiliary control reg
+ mrc p15, 0, r9, c1, c0, 0 @ control reg
+ bic r4, r4, #2 @ clear frequency change bit
+ stmia r0, {r4 - r9} @ store cp regs
+ ldmfd sp!, {r4 - r9, pc}
+ENDPROC(cpu_xscale_do_suspend)
+
+ENTRY(cpu_xscale_do_resume)
+ ldmia r0, {r4 - r9} @ load cp regs
+ mov ip, #0
+ mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
+ mcr p15, 0, ip, c7, c7, 0 @ invalidate I & D caches, BTB
+ mcr p14, 0, r4, c6, c0, 0 @ clock configuration, turbo mode.
+ mcr p15, 0, r5, c15, c1, 0 @ CP access reg
+ mcr p15, 0, r6, c13, c0, 0 @ PID
+ mcr p15, 0, r7, c3, c0, 0 @ domain ID
+ mcr p15, 0, r1, c2, c0, 0 @ translation table base addr
+ mcr p15, 0, r8, c1, c0, 1 @ auxiliary control reg
+ mov r0, r9 @ control register
+ b cpu_resume_mmu
+ENDPROC(cpu_xscale_do_resume)
+#endif
+
+ .type __xscale_setup, #function
+__xscale_setup:
+ mcr p15, 0, ip, c7, c7, 0 @ invalidate I, D caches & BTB
+ mcr p15, 0, ip, c7, c10, 4 @ Drain Write (& Fill) Buffer
+ mcr p15, 0, ip, c8, c7, 0 @ invalidate I, D TLBs
+ mov r0, #1 << 6 @ cp6 for IOP3xx and Bulverde
+ orr r0, r0, #1 << 13 @ Its undefined whether this
+ mcr p15, 0, r0, c15, c1, 0 @ affects USR or SVC modes
+
+ adr r5, xscale_crval
+ ldmia r5, {r5, r6}
+ mrc p15, 0, r0, c1, c0, 0 @ get control register
+ bic r0, r0, r5
+ orr r0, r0, r6
+ ret lr
+ .size __xscale_setup, . - __xscale_setup
+
+ /*
+ * R
+ * .RVI ZFRS BLDP WCAM
+ * ..11 1.01 .... .101
+ *
+ */
+ .type xscale_crval, #object
+xscale_crval:
+ crval clear=0x00003b07, mmuset=0x00003905, ucset=0x00001900
+
+ __INITDATA
+
+ @ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
+ define_processor_functions xscale, dabort=v5t_early_abort, pabort=legacy_pabort, suspend=1
+
+ .section ".rodata"
+
+ string cpu_arch_name, "armv5te"
+ string cpu_elf_name, "v5"
+
+ string cpu_80200_A0_A1_name, "XScale-80200 A0/A1"
+ string cpu_80200_name, "XScale-80200"
+ string cpu_80219_name, "XScale-80219"
+ string cpu_8032x_name, "XScale-IOP8032x Family"
+ string cpu_8033x_name, "XScale-IOP8033x Family"
+ string cpu_pxa250_name, "XScale-PXA250"
+ string cpu_pxa210_name, "XScale-PXA210"
+ string cpu_ixp42x_name, "XScale-IXP42x Family"
+ string cpu_ixp43x_name, "XScale-IXP43x Family"
+ string cpu_ixp46x_name, "XScale-IXP46x Family"
+ string cpu_ixp2400_name, "XScale-IXP2400"
+ string cpu_ixp2800_name, "XScale-IXP2800"
+ string cpu_pxa255_name, "XScale-PXA255"
+ string cpu_pxa270_name, "XScale-PXA270"
+
+ .align
+
+ .section ".proc.info.init", #alloc
+
+.macro xscale_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req, cache
+ .type __\name\()_proc_info,#object
+__\name\()_proc_info:
+ .long \cpu_val
+ .long \cpu_mask
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_BUFFERABLE | \
+ PMD_SECT_CACHEABLE | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ initfn __xscale_setup, __\name\()_proc_info
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+ .long \cpu_name
+ .long xscale_processor_functions
+ .long v4wbi_tlb_fns
+ .long xscale_mc_user_fns
+ .ifb \cache
+ .long xscale_cache_fns
+ .else
+ .long \cache
+ .endif
+ .size __\name\()_proc_info, . - __\name\()_proc_info
+.endm
+
+ xscale_proc_info 80200_A0_A1, 0x69052000, 0xfffffffe, cpu_80200_name, \
+ cache=xscale_80200_A0_A1_cache_fns
+ xscale_proc_info 80200, 0x69052000, 0xfffffff0, cpu_80200_name
+ xscale_proc_info 80219, 0x69052e20, 0xffffffe0, cpu_80219_name
+ xscale_proc_info 8032x, 0x69052420, 0xfffff7e0, cpu_8032x_name
+ xscale_proc_info 8033x, 0x69054010, 0xfffffd30, cpu_8033x_name
+ xscale_proc_info pxa250, 0x69052100, 0xfffff7f0, cpu_pxa250_name
+ xscale_proc_info pxa210, 0x69052120, 0xfffff3f0, cpu_pxa210_name
+ xscale_proc_info ixp2400, 0x69054190, 0xfffffff0, cpu_ixp2400_name
+ xscale_proc_info ixp2800, 0x690541a0, 0xfffffff0, cpu_ixp2800_name
+ xscale_proc_info ixp42x, 0x690541c0, 0xffffffc0, cpu_ixp42x_name
+ xscale_proc_info ixp43x, 0x69054040, 0xfffffff0, cpu_ixp43x_name
+ xscale_proc_info ixp46x, 0x69054200, 0xffffff00, cpu_ixp46x_name
+ xscale_proc_info pxa255, 0x69052d00, 0xfffffff0, cpu_pxa255_name
+ xscale_proc_info pxa270, 0x69054110, 0xfffffff0, cpu_pxa270_name
Code Review / kvmfornfv.git / blobdiff