--- /dev/null
+/*
+ * OMAP2+ common Power & Reset Management (PRM) IP block functions
+ *
+ * Copyright (C) 2011 Texas Instruments, Inc.
+ * Tero Kristo <t-kristo@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *
+ * For historical purposes, the API used to configure the PRM
+ * interrupt handler refers to it as the "PRCM interrupt." The
+ * underlying registers are located in the PRM on OMAP3/4.
+ *
+ * XXX This code should eventually be moved to a PRM driver.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/clk-provider.h>
+#include <linux/clk/ti.h>
+
+#include "soc.h"
+#include "prm2xxx_3xxx.h"
+#include "prm2xxx.h"
+#include "prm3xxx.h"
+#include "prm33xx.h"
+#include "prm44xx.h"
+#include "prm54xx.h"
+#include "prm7xx.h"
+#include "prcm43xx.h"
+#include "common.h"
+#include "clock.h"
+#include "cm.h"
+#include "control.h"
+
+/*
+ * OMAP_PRCM_MAX_NR_PENDING_REG: maximum number of PRM_IRQ*_MPU regs
+ * XXX this is technically not needed, since
+ * omap_prcm_register_chain_handler() could allocate this based on the
+ * actual amount of memory needed for the SoC
+ */
+#define OMAP_PRCM_MAX_NR_PENDING_REG 2
+
+/*
+ * prcm_irq_chips: an array of all of the "generic IRQ chips" in use
+ * by the PRCM interrupt handler code. There will be one 'chip' per
+ * PRM_{IRQSTATUS,IRQENABLE}_MPU register pair. (So OMAP3 will have
+ * one "chip" and OMAP4 will have two.)
+ */
+static struct irq_chip_generic **prcm_irq_chips;
+
+/*
+ * prcm_irq_setup: the PRCM IRQ parameters for the hardware the code
+ * is currently running on. Defined and passed by initialization code
+ * that calls omap_prcm_register_chain_handler().
+ */
+static struct omap_prcm_irq_setup *prcm_irq_setup;
+
+/* prm_base: base virtual address of the PRM IP block */
+void __iomem *prm_base;
+
+u16 prm_features;
+
+/*
+ * prm_ll_data: function pointers to SoC-specific implementations of
+ * common PRM functions
+ */
+static struct prm_ll_data null_prm_ll_data;
+static struct prm_ll_data *prm_ll_data = &null_prm_ll_data;
+
+/* Private functions */
+
+/*
+ * Move priority events from events to priority_events array
+ */
+static void omap_prcm_events_filter_priority(unsigned long *events,
+ unsigned long *priority_events)
+{
+ int i;
+
+ for (i = 0; i < prcm_irq_setup->nr_regs; i++) {
+ priority_events[i] =
+ events[i] & prcm_irq_setup->priority_mask[i];
+ events[i] ^= priority_events[i];
+ }
+}
+
+/*
+ * PRCM Interrupt Handler
+ *
+ * This is a common handler for the OMAP PRCM interrupts. Pending
+ * interrupts are detected by a call to prcm_pending_events and
+ * dispatched accordingly. Clearing of the wakeup events should be
+ * done by the SoC specific individual handlers.
+ */
+static void omap_prcm_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+ unsigned long pending[OMAP_PRCM_MAX_NR_PENDING_REG];
+ unsigned long priority_pending[OMAP_PRCM_MAX_NR_PENDING_REG];
+ struct irq_chip *chip = irq_desc_get_chip(desc);
+ unsigned int virtirq;
+ int nr_irq = prcm_irq_setup->nr_regs * 32;
+
+ /*
+ * If we are suspended, mask all interrupts from PRCM level,
+ * this does not ack them, and they will be pending until we
+ * re-enable the interrupts, at which point the
+ * omap_prcm_irq_handler will be executed again. The
+ * _save_and_clear_irqen() function must ensure that the PRM
+ * write to disable all IRQs has reached the PRM before
+ * returning, or spurious PRCM interrupts may occur during
+ * suspend.
+ */
+ if (prcm_irq_setup->suspended) {
+ prcm_irq_setup->save_and_clear_irqen(prcm_irq_setup->saved_mask);
+ prcm_irq_setup->suspend_save_flag = true;
+ }
+
+ /*
+ * Loop until all pending irqs are handled, since
+ * generic_handle_irq() can cause new irqs to come
+ */
+ while (!prcm_irq_setup->suspended) {
+ prcm_irq_setup->read_pending_irqs(pending);
+
+ /* No bit set, then all IRQs are handled */
+ if (find_first_bit(pending, nr_irq) >= nr_irq)
+ break;
+
+ omap_prcm_events_filter_priority(pending, priority_pending);
+
+ /*
+ * Loop on all currently pending irqs so that new irqs
+ * cannot starve previously pending irqs
+ */
+
+ /* Serve priority events first */
+ for_each_set_bit(virtirq, priority_pending, nr_irq)
+ generic_handle_irq(prcm_irq_setup->base_irq + virtirq);
+
+ /* Serve normal events next */
+ for_each_set_bit(virtirq, pending, nr_irq)
+ generic_handle_irq(prcm_irq_setup->base_irq + virtirq);
+ }
+ if (chip->irq_ack)
+ chip->irq_ack(&desc->irq_data);
+ if (chip->irq_eoi)
+ chip->irq_eoi(&desc->irq_data);
+ chip->irq_unmask(&desc->irq_data);
+
+ prcm_irq_setup->ocp_barrier(); /* avoid spurious IRQs */
+}
+
+/* Public functions */
+
+/**
+ * omap_prcm_event_to_irq - given a PRCM event name, returns the
+ * corresponding IRQ on which the handler should be registered
+ * @name: name of the PRCM interrupt bit to look up - see struct omap_prcm_irq
+ *
+ * Returns the Linux internal IRQ ID corresponding to @name upon success,
+ * or -ENOENT upon failure.
+ */
+int omap_prcm_event_to_irq(const char *name)
+{
+ int i;
+
+ if (!prcm_irq_setup || !name)
+ return -ENOENT;
+
+ for (i = 0; i < prcm_irq_setup->nr_irqs; i++)
+ if (!strcmp(prcm_irq_setup->irqs[i].name, name))
+ return prcm_irq_setup->base_irq +
+ prcm_irq_setup->irqs[i].offset;
+
+ return -ENOENT;
+}
+
+/**
+ * omap_prcm_irq_cleanup - reverses memory allocated and other steps
+ * done by omap_prcm_register_chain_handler()
+ *
+ * No return value.
+ */
+void omap_prcm_irq_cleanup(void)
+{
+ unsigned int irq;
+ int i;
+
+ if (!prcm_irq_setup) {
+ pr_err("PRCM: IRQ handler not initialized; cannot cleanup\n");
+ return;
+ }
+
+ if (prcm_irq_chips) {
+ for (i = 0; i < prcm_irq_setup->nr_regs; i++) {
+ if (prcm_irq_chips[i])
+ irq_remove_generic_chip(prcm_irq_chips[i],
+ 0xffffffff, 0, 0);
+ prcm_irq_chips[i] = NULL;
+ }
+ kfree(prcm_irq_chips);
+ prcm_irq_chips = NULL;
+ }
+
+ kfree(prcm_irq_setup->saved_mask);
+ prcm_irq_setup->saved_mask = NULL;
+
+ kfree(prcm_irq_setup->priority_mask);
+ prcm_irq_setup->priority_mask = NULL;
+
+ if (prcm_irq_setup->xlate_irq)
+ irq = prcm_irq_setup->xlate_irq(prcm_irq_setup->irq);
+ else
+ irq = prcm_irq_setup->irq;
+ irq_set_chained_handler(irq, NULL);
+
+ if (prcm_irq_setup->base_irq > 0)
+ irq_free_descs(prcm_irq_setup->base_irq,
+ prcm_irq_setup->nr_regs * 32);
+ prcm_irq_setup->base_irq = 0;
+}
+
+void omap_prcm_irq_prepare(void)
+{
+ prcm_irq_setup->suspended = true;
+}
+
+void omap_prcm_irq_complete(void)
+{
+ prcm_irq_setup->suspended = false;
+
+ /* If we have not saved the masks, do not attempt to restore */
+ if (!prcm_irq_setup->suspend_save_flag)
+ return;
+
+ prcm_irq_setup->suspend_save_flag = false;
+
+ /*
+ * Re-enable all masked PRCM irq sources, this causes the PRCM
+ * interrupt to fire immediately if the events were masked
+ * previously in the chain handler
+ */
+ prcm_irq_setup->restore_irqen(prcm_irq_setup->saved_mask);
+}
+
+/**
+ * omap_prcm_register_chain_handler - initializes the prcm chained interrupt
+ * handler based on provided parameters
+ * @irq_setup: hardware data about the underlying PRM/PRCM
+ *
+ * Set up the PRCM chained interrupt handler on the PRCM IRQ. Sets up
+ * one generic IRQ chip per PRM interrupt status/enable register pair.
+ * Returns 0 upon success, -EINVAL if called twice or if invalid
+ * arguments are passed, or -ENOMEM on any other error.
+ */
+int omap_prcm_register_chain_handler(struct omap_prcm_irq_setup *irq_setup)
+{
+ int nr_regs;
+ u32 mask[OMAP_PRCM_MAX_NR_PENDING_REG];
+ int offset, i;
+ struct irq_chip_generic *gc;
+ struct irq_chip_type *ct;
+ unsigned int irq;
+
+ if (!irq_setup)
+ return -EINVAL;
+
+ nr_regs = irq_setup->nr_regs;
+
+ if (prcm_irq_setup) {
+ pr_err("PRCM: already initialized; won't reinitialize\n");
+ return -EINVAL;
+ }
+
+ if (nr_regs > OMAP_PRCM_MAX_NR_PENDING_REG) {
+ pr_err("PRCM: nr_regs too large\n");
+ return -EINVAL;
+ }
+
+ prcm_irq_setup = irq_setup;
+
+ prcm_irq_chips = kzalloc(sizeof(void *) * nr_regs, GFP_KERNEL);
+ prcm_irq_setup->saved_mask = kzalloc(sizeof(u32) * nr_regs, GFP_KERNEL);
+ prcm_irq_setup->priority_mask = kzalloc(sizeof(u32) * nr_regs,
+ GFP_KERNEL);
+
+ if (!prcm_irq_chips || !prcm_irq_setup->saved_mask ||
+ !prcm_irq_setup->priority_mask) {
+ pr_err("PRCM: kzalloc failed\n");
+ goto err;
+ }
+
+ memset(mask, 0, sizeof(mask));
+
+ for (i = 0; i < irq_setup->nr_irqs; i++) {
+ offset = irq_setup->irqs[i].offset;
+ mask[offset >> 5] |= 1 << (offset & 0x1f);
+ if (irq_setup->irqs[i].priority)
+ irq_setup->priority_mask[offset >> 5] |=
+ 1 << (offset & 0x1f);
+ }
+
+ if (irq_setup->xlate_irq)
+ irq = irq_setup->xlate_irq(irq_setup->irq);
+ else
+ irq = irq_setup->irq;
+ irq_set_chained_handler(irq, omap_prcm_irq_handler);
+
+ irq_setup->base_irq = irq_alloc_descs(-1, 0, irq_setup->nr_regs * 32,
+ 0);
+
+ if (irq_setup->base_irq < 0) {
+ pr_err("PRCM: failed to allocate irq descs: %d\n",
+ irq_setup->base_irq);
+ goto err;
+ }
+
+ for (i = 0; i < irq_setup->nr_regs; i++) {
+ gc = irq_alloc_generic_chip("PRCM", 1,
+ irq_setup->base_irq + i * 32, prm_base,
+ handle_level_irq);
+
+ if (!gc) {
+ pr_err("PRCM: failed to allocate generic chip\n");
+ goto err;
+ }
+ ct = gc->chip_types;
+ ct->chip.irq_ack = irq_gc_ack_set_bit;
+ ct->chip.irq_mask = irq_gc_mask_clr_bit;
+ ct->chip.irq_unmask = irq_gc_mask_set_bit;
+
+ ct->regs.ack = irq_setup->ack + i * 4;
+ ct->regs.mask = irq_setup->mask + i * 4;
+
+ irq_setup_generic_chip(gc, mask[i], 0, IRQ_NOREQUEST, 0);
+ prcm_irq_chips[i] = gc;
+ }
+
+ if (of_have_populated_dt()) {
+ int irq = omap_prcm_event_to_irq("io");
+ omap_pcs_legacy_init(irq, irq_setup->reconfigure_io_chain);
+ }
+
+ return 0;
+
+err:
+ omap_prcm_irq_cleanup();
+ return -ENOMEM;
+}
+
+/**
+ * omap2_set_globals_prm - set the PRM base address (for early use)
+ * @prm: PRM base virtual address
+ *
+ * XXX Will be replaced when the PRM/CM drivers are completed.
+ */
+void __init omap2_set_globals_prm(void __iomem *prm)
+{
+ prm_base = prm;
+}
+
+/**
+ * prm_read_reset_sources - return the sources of the SoC's last reset
+ *
+ * Return a u32 bitmask representing the reset sources that caused the
+ * SoC to reset. The low-level per-SoC functions called by this
+ * function remap the SoC-specific reset source bits into an
+ * OMAP-common set of reset source bits, defined in
+ * arch/arm/mach-omap2/prm.h. Returns the standardized reset source
+ * u32 bitmask from the hardware upon success, or returns (1 <<
+ * OMAP_UNKNOWN_RST_SRC_ID_SHIFT) if no low-level read_reset_sources()
+ * function was registered.
+ */
+u32 prm_read_reset_sources(void)
+{
+ u32 ret = 1 << OMAP_UNKNOWN_RST_SRC_ID_SHIFT;
+
+ if (prm_ll_data->read_reset_sources)
+ ret = prm_ll_data->read_reset_sources();
+ else
+ WARN_ONCE(1, "prm: %s: no mapping function defined for reset sources\n", __func__);
+
+ return ret;
+}
+
+/**
+ * prm_was_any_context_lost_old - was device context lost? (old API)
+ * @part: PRM partition ID (e.g., OMAP4430_PRM_PARTITION)
+ * @inst: PRM instance offset (e.g., OMAP4430_PRM_MPU_INST)
+ * @idx: CONTEXT register offset
+ *
+ * Return 1 if any bits were set in the *_CONTEXT_* register
+ * identified by (@part, @inst, @idx), which means that some context
+ * was lost for that module; otherwise, return 0. XXX Deprecated;
+ * callers need to use a less-SoC-dependent way to identify hardware
+ * IP blocks.
+ */
+bool prm_was_any_context_lost_old(u8 part, s16 inst, u16 idx)
+{
+ bool ret = true;
+
+ if (prm_ll_data->was_any_context_lost_old)
+ ret = prm_ll_data->was_any_context_lost_old(part, inst, idx);
+ else
+ WARN_ONCE(1, "prm: %s: no mapping function defined\n",
+ __func__);
+
+ return ret;
+}
+
+/**
+ * prm_clear_context_lost_flags_old - clear context loss flags (old API)
+ * @part: PRM partition ID (e.g., OMAP4430_PRM_PARTITION)
+ * @inst: PRM instance offset (e.g., OMAP4430_PRM_MPU_INST)
+ * @idx: CONTEXT register offset
+ *
+ * Clear hardware context loss bits for the module identified by
+ * (@part, @inst, @idx). No return value. XXX Deprecated; callers
+ * need to use a less-SoC-dependent way to identify hardware IP
+ * blocks.
+ */
+void prm_clear_context_loss_flags_old(u8 part, s16 inst, u16 idx)
+{
+ if (prm_ll_data->clear_context_loss_flags_old)
+ prm_ll_data->clear_context_loss_flags_old(part, inst, idx);
+ else
+ WARN_ONCE(1, "prm: %s: no mapping function defined\n",
+ __func__);
+}
+
+/**
+ * omap_prm_assert_hardreset - assert hardreset for an IP block
+ * @shift: register bit shift corresponding to the reset line
+ * @part: PRM partition
+ * @prm_mod: PRM submodule base or instance offset
+ * @offset: register offset
+ *
+ * Asserts a hardware reset line for an IP block.
+ */
+int omap_prm_assert_hardreset(u8 shift, u8 part, s16 prm_mod, u16 offset)
+{
+ if (!prm_ll_data->assert_hardreset) {
+ WARN_ONCE(1, "prm: %s: no mapping function defined\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ return prm_ll_data->assert_hardreset(shift, part, prm_mod, offset);
+}
+
+/**
+ * omap_prm_deassert_hardreset - deassert hardreset for an IP block
+ * @shift: register bit shift corresponding to the reset line
+ * @st_shift: reset status bit shift corresponding to the reset line
+ * @part: PRM partition
+ * @prm_mod: PRM submodule base or instance offset
+ * @offset: register offset
+ * @st_offset: status register offset
+ *
+ * Deasserts a hardware reset line for an IP block.
+ */
+int omap_prm_deassert_hardreset(u8 shift, u8 st_shift, u8 part, s16 prm_mod,
+ u16 offset, u16 st_offset)
+{
+ if (!prm_ll_data->deassert_hardreset) {
+ WARN_ONCE(1, "prm: %s: no mapping function defined\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ return prm_ll_data->deassert_hardreset(shift, st_shift, part, prm_mod,
+ offset, st_offset);
+}
+
+/**
+ * omap_prm_is_hardreset_asserted - check the hardreset status for an IP block
+ * @shift: register bit shift corresponding to the reset line
+ * @part: PRM partition
+ * @prm_mod: PRM submodule base or instance offset
+ * @offset: register offset
+ *
+ * Checks if a hardware reset line for an IP block is enabled or not.
+ */
+int omap_prm_is_hardreset_asserted(u8 shift, u8 part, s16 prm_mod, u16 offset)
+{
+ if (!prm_ll_data->is_hardreset_asserted) {
+ WARN_ONCE(1, "prm: %s: no mapping function defined\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ return prm_ll_data->is_hardreset_asserted(shift, part, prm_mod, offset);
+}
+
+/**
+ * omap_prm_reconfigure_io_chain - clear latches and reconfigure I/O chain
+ *
+ * Clear any previously-latched I/O wakeup events and ensure that the
+ * I/O wakeup gates are aligned with the current mux settings.
+ * Calls SoC specific I/O chain reconfigure function if available,
+ * otherwise does nothing.
+ */
+void omap_prm_reconfigure_io_chain(void)
+{
+ if (!prcm_irq_setup || !prcm_irq_setup->reconfigure_io_chain)
+ return;
+
+ prcm_irq_setup->reconfigure_io_chain();
+}
+
+/**
+ * omap_prm_reset_system - trigger global SW reset
+ *
+ * Triggers SoC specific global warm reset to reboot the device.
+ */
+void omap_prm_reset_system(void)
+{
+ if (!prm_ll_data->reset_system) {
+ WARN_ONCE(1, "prm: %s: no mapping function defined\n",
+ __func__);
+ return;
+ }
+
+ prm_ll_data->reset_system();
+
+ while (1)
+ cpu_relax();
+}
+
+/**
+ * omap_prm_clear_mod_irqs - clear wake-up events from PRCM interrupt
+ * @module: PRM module to clear wakeups from
+ * @regs: register to clear
+ * @wkst_mask: wkst bits to clear
+ *
+ * Clears any wakeup events for the module and register set defined.
+ * Uses SoC specific implementation to do the actual wakeup status
+ * clearing.
+ */
+int omap_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask)
+{
+ if (!prm_ll_data->clear_mod_irqs) {
+ WARN_ONCE(1, "prm: %s: no mapping function defined\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ return prm_ll_data->clear_mod_irqs(module, regs, wkst_mask);
+}
+
+/**
+ * omap_prm_vp_check_txdone - check voltage processor TX done status
+ *
+ * Checks if voltage processor transmission has been completed.
+ * Returns non-zero if a transmission has completed, 0 otherwise.
+ */
+u32 omap_prm_vp_check_txdone(u8 vp_id)
+{
+ if (!prm_ll_data->vp_check_txdone) {
+ WARN_ONCE(1, "prm: %s: no mapping function defined\n",
+ __func__);
+ return 0;
+ }
+
+ return prm_ll_data->vp_check_txdone(vp_id);
+}
+
+/**
+ * omap_prm_vp_clear_txdone - clears voltage processor TX done status
+ *
+ * Clears the status bit for completed voltage processor transmission
+ * returned by prm_vp_check_txdone.
+ */
+void omap_prm_vp_clear_txdone(u8 vp_id)
+{
+ if (!prm_ll_data->vp_clear_txdone) {
+ WARN_ONCE(1, "prm: %s: no mapping function defined\n",
+ __func__);
+ return;
+ }
+
+ prm_ll_data->vp_clear_txdone(vp_id);
+}
+
+/**
+ * prm_register - register per-SoC low-level data with the PRM
+ * @pld: low-level per-SoC OMAP PRM data & function pointers to register
+ *
+ * Register per-SoC low-level OMAP PRM data and function pointers with
+ * the OMAP PRM common interface. The caller must keep the data
+ * pointed to by @pld valid until it calls prm_unregister() and
+ * it returns successfully. Returns 0 upon success, -EINVAL if @pld
+ * is NULL, or -EEXIST if prm_register() has already been called
+ * without an intervening prm_unregister().
+ */
+int prm_register(struct prm_ll_data *pld)
+{
+ if (!pld)
+ return -EINVAL;
+
+ if (prm_ll_data != &null_prm_ll_data)
+ return -EEXIST;
+
+ prm_ll_data = pld;
+
+ return 0;
+}
+
+/**
+ * prm_unregister - unregister per-SoC low-level data & function pointers
+ * @pld: low-level per-SoC OMAP PRM data & function pointers to unregister
+ *
+ * Unregister per-SoC low-level OMAP PRM data and function pointers
+ * that were previously registered with prm_register(). The
+ * caller may not destroy any of the data pointed to by @pld until
+ * this function returns successfully. Returns 0 upon success, or
+ * -EINVAL if @pld is NULL or if @pld does not match the struct
+ * prm_ll_data * previously registered by prm_register().
+ */
+int prm_unregister(struct prm_ll_data *pld)
+{
+ if (!pld || prm_ll_data != pld)
+ return -EINVAL;
+
+ prm_ll_data = &null_prm_ll_data;
+
+ return 0;
+}
+
+#ifdef CONFIG_ARCH_OMAP2
+static struct omap_prcm_init_data omap2_prm_data __initdata = {
+ .index = TI_CLKM_PRM,
+ .init = omap2xxx_prm_init,
+};
+#endif
+
+#ifdef CONFIG_ARCH_OMAP3
+static struct omap_prcm_init_data omap3_prm_data __initdata = {
+ .index = TI_CLKM_PRM,
+ .init = omap3xxx_prm_init,
+
+ /*
+ * IVA2 offset is a negative value, must offset the prm_base
+ * address by this to get it to positive
+ */
+ .offset = -OMAP3430_IVA2_MOD,
+};
+#endif
+
+#if defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_TI81XX)
+static struct omap_prcm_init_data am3_prm_data __initdata = {
+ .index = TI_CLKM_PRM,
+ .init = am33xx_prm_init,
+};
+#endif
+
+#ifdef CONFIG_ARCH_OMAP4
+static struct omap_prcm_init_data omap4_prm_data __initdata = {
+ .index = TI_CLKM_PRM,
+ .init = omap44xx_prm_init,
+ .device_inst_offset = OMAP4430_PRM_DEVICE_INST,
+ .flags = PRM_HAS_IO_WAKEUP | PRM_HAS_VOLTAGE | PRM_IRQ_DEFAULT,
+};
+#endif
+
+#ifdef CONFIG_SOC_OMAP5
+static struct omap_prcm_init_data omap5_prm_data __initdata = {
+ .index = TI_CLKM_PRM,
+ .init = omap44xx_prm_init,
+ .device_inst_offset = OMAP54XX_PRM_DEVICE_INST,
+ .flags = PRM_HAS_IO_WAKEUP | PRM_HAS_VOLTAGE,
+};
+#endif
+
+#ifdef CONFIG_SOC_DRA7XX
+static struct omap_prcm_init_data dra7_prm_data __initdata = {
+ .index = TI_CLKM_PRM,
+ .init = omap44xx_prm_init,
+ .device_inst_offset = DRA7XX_PRM_DEVICE_INST,
+ .flags = PRM_HAS_IO_WAKEUP,
+};
+#endif
+
+#ifdef CONFIG_SOC_AM43XX
+static struct omap_prcm_init_data am4_prm_data __initdata = {
+ .index = TI_CLKM_PRM,
+ .init = omap44xx_prm_init,
+ .device_inst_offset = AM43XX_PRM_DEVICE_INST,
+};
+#endif
+
+#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
+static struct omap_prcm_init_data scrm_data __initdata = {
+ .index = TI_CLKM_SCRM,
+};
+#endif
+
+static const struct of_device_id omap_prcm_dt_match_table[] __initconst = {
+#ifdef CONFIG_SOC_AM33XX
+ { .compatible = "ti,am3-prcm", .data = &am3_prm_data },
+#endif
+#ifdef CONFIG_SOC_AM43XX
+ { .compatible = "ti,am4-prcm", .data = &am4_prm_data },
+#endif
+#ifdef CONFIG_SOC_TI81XX
+ { .compatible = "ti,dm814-prcm", .data = &am3_prm_data },
+ { .compatible = "ti,dm816-prcm", .data = &am3_prm_data },
+#endif
+#ifdef CONFIG_ARCH_OMAP2
+ { .compatible = "ti,omap2-prcm", .data = &omap2_prm_data },
+#endif
+#ifdef CONFIG_ARCH_OMAP3
+ { .compatible = "ti,omap3-prm", .data = &omap3_prm_data },
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+ { .compatible = "ti,omap4-prm", .data = &omap4_prm_data },
+ { .compatible = "ti,omap4-scrm", .data = &scrm_data },
+#endif
+#ifdef CONFIG_SOC_OMAP5
+ { .compatible = "ti,omap5-prm", .data = &omap5_prm_data },
+ { .compatible = "ti,omap5-scrm", .data = &scrm_data },
+#endif
+#ifdef CONFIG_SOC_DRA7XX
+ { .compatible = "ti,dra7-prm", .data = &dra7_prm_data },
+#endif
+ { }
+};
+
+/**
+ * omap2_prm_base_init - initialize iomappings for the PRM driver
+ *
+ * Detects and initializes the iomappings for the PRM driver, based
+ * on the DT data. Returns 0 in success, negative error value
+ * otherwise.
+ */
+int __init omap2_prm_base_init(void)
+{
+ struct device_node *np;
+ const struct of_device_id *match;
+ struct omap_prcm_init_data *data;
+ void __iomem *mem;
+
+ for_each_matching_node_and_match(np, omap_prcm_dt_match_table, &match) {
+ data = (struct omap_prcm_init_data *)match->data;
+
+ mem = of_iomap(np, 0);
+ if (!mem)
+ return -ENOMEM;
+
+ if (data->index == TI_CLKM_PRM)
+ prm_base = mem + data->offset;
+
+ data->mem = mem;
+
+ data->np = np;
+
+ if (data->init)
+ data->init(data);
+ }
+
+ return 0;
+}
+
+int __init omap2_prcm_base_init(void)
+{
+ int ret;
+
+ ret = omap2_prm_base_init();
+ if (ret)
+ return ret;
+
+ return omap2_cm_base_init();
+}
+
+/**
+ * omap_prcm_init - low level init for the PRCM drivers
+ *
+ * Initializes the low level clock infrastructure for PRCM drivers.
+ * Returns 0 in success, negative error value in failure.
+ */
+int __init omap_prcm_init(void)
+{
+ struct device_node *np;
+ const struct of_device_id *match;
+ const struct omap_prcm_init_data *data;
+ int ret;
+
+ for_each_matching_node_and_match(np, omap_prcm_dt_match_table, &match) {
+ data = match->data;
+
+ ret = omap2_clk_provider_init(np, data->index, NULL, data->mem);
+ if (ret)
+ return ret;
+ }
+
+ omap_cm_init();
+
+ return 0;
+}
+
+static int __init prm_late_init(void)
+{
+ if (prm_ll_data->late_init)
+ return prm_ll_data->late_init();
+ return 0;
+}
+subsys_initcall(prm_late_init);
Code Review / kvmfornfv.git / blobdiff