* that causes it to save wrong values... Be aware!
*/
+#include <linux/init.h>
+
#include <asm/assembler.h>
#include <asm/memory.h>
#include <asm/glue-df.h>
#ifdef CONFIG_MULTI_IRQ_HANDLER
ldr r1, =handle_arch_irq
mov r0, sp
- adr lr, BSYM(9997f)
+ badr lr, 9997f
ldr pc, [r1]
#else
arch_irq_handler_default
#define SPFIX(code...)
#endif
- .macro svc_entry, stack_hole=0, trace=1
+ .macro svc_entry, stack_hole=0, trace=1, uaccess=1
UNWIND(.fnstart )
UNWIND(.save {r0 - pc} )
- sub sp, sp, #(S_FRAME_SIZE + \stack_hole - 4)
+ sub sp, sp, #(S_FRAME_SIZE + 8 + \stack_hole - 4)
#ifdef CONFIG_THUMB2_KERNEL
SPFIX( str r0, [sp] ) @ temporarily saved
SPFIX( mov r0, sp )
ldmia r0, {r3 - r5}
add r7, sp, #S_SP - 4 @ here for interlock avoidance
mov r6, #-1 @ "" "" "" ""
- add r2, sp, #(S_FRAME_SIZE + \stack_hole - 4)
+ add r2, sp, #(S_FRAME_SIZE + 8 + \stack_hole - 4)
SPFIX( addeq r2, r2, #4 )
str r3, [sp, #-4]! @ save the "real" r0 copied
@ from the exception stack
@
stmia r7, {r2 - r6}
+ uaccess_save r0
+ .if \uaccess
+ uaccess_disable r0
+ .endif
+
.if \trace
#ifdef CONFIG_TRACE_IRQFLAGS
bl trace_hardirqs_off
.align 5
__dabt_svc:
- svc_entry
+ svc_entry uaccess=0
mov r2, sp
dabt_helper
THUMB( ldr r5, [sp, #S_PSR] ) @ potentially updated CPSR
str r4, [sp, #S_PC]
orr r0, r9, r0, lsl #16
#endif
- adr r9, BSYM(__und_svc_finish)
+ badr r9, __und_svc_finish
mov r2, r4
bl call_fpe
#error "sizeof(struct pt_regs) must be a multiple of 8"
#endif
- .macro usr_entry, trace=1
+ .macro usr_entry, trace=1, uaccess=1
UNWIND(.fnstart )
UNWIND(.cantunwind ) @ don't unwind the user space
sub sp, sp, #S_FRAME_SIZE
ARM( stmdb r0, {sp, lr}^ )
THUMB( store_user_sp_lr r0, r1, S_SP - S_PC )
+ .if \uaccess
+ uaccess_disable ip
+ .endif
+
@ Enable the alignment trap while in kernel mode
ATRAP( teq r8, r7)
ATRAP( mcrne p15, 0, r8, c1, c0, 0)
zero_fp
.if \trace
-#ifdef CONFIG_IRQSOFF_TRACER
+#ifdef CONFIG_TRACE_IRQFLAGS
bl trace_hardirqs_off
#endif
ct_user_exit save = 0
.endm
.macro kuser_cmpxchg_check
-#if !defined(CONFIG_CPU_32v6K) && defined(CONFIG_KUSER_HELPERS) && \
- !defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG)
+#if !defined(CONFIG_CPU_32v6K) && defined(CONFIG_KUSER_HELPERS)
#ifndef CONFIG_MMU
#warning "NPTL on non MMU needs fixing"
#else
.align 5
__dabt_usr:
- usr_entry
+ usr_entry uaccess=0
kuser_cmpxchg_check
mov r2, sp
dabt_helper
.align 5
__und_usr:
- usr_entry
+ usr_entry uaccess=0
mov r2, r4
mov r3, r5
@ instruction, or the more conventional lr if we are to treat
@ this as a real undefined instruction
@
- adr r9, BSYM(ret_from_exception)
+ badr r9, ret_from_exception
@ IRQs must be enabled before attempting to read the instruction from
@ user space since that could cause a page/translation fault if the
1: ldrt r0, [r4]
ARM_BE8(rev r0, r0) @ little endian instruction
+ uaccess_disable ip
+
@ r0 = 32-bit ARM instruction which caused the exception
@ r2 = PC value for the following instruction (:= regs->ARM_pc)
@ r4 = PC value for the faulting instruction
@ lr = 32-bit undefined instruction function
- adr lr, BSYM(__und_usr_fault_32)
+ badr lr, __und_usr_fault_32
b call_fpe
__und_usr_thumb:
2: ldrht r5, [r4]
ARM_BE8(rev16 r5, r5) @ little endian instruction
cmp r5, #0xe800 @ 32bit instruction if xx != 0
- blo __und_usr_fault_16 @ 16bit undefined instruction
+ blo __und_usr_fault_16_pan @ 16bit undefined instruction
3: ldrht r0, [r2]
ARM_BE8(rev16 r0, r0) @ little endian instruction
+ uaccess_disable ip
add r2, r2, #2 @ r2 is PC + 2, make it PC + 4
str r2, [sp, #S_PC] @ it's a 2x16bit instr, update
orr r0, r0, r5, lsl #16
- adr lr, BSYM(__und_usr_fault_32)
+ badr lr, __und_usr_fault_32
@ r0 = the two 16-bit Thumb instructions which caused the exception
@ r2 = PC value for the following Thumb instruction (:= regs->ARM_pc)
@ r4 = PC value for the first 16-bit Thumb instruction
__und_usr_fault_32:
mov r1, #4
b 1f
+__und_usr_fault_16_pan:
+ uaccess_disable ip
__und_usr_fault_16:
mov r1, #2
1: mov r0, sp
- adr lr, BSYM(ret_from_exception)
+ badr lr, ret_from_exception
b __und_fault
ENDPROC(__und_usr_fault_32)
ENDPROC(__und_usr_fault_16)
ldr r4, [r2, #TI_TP_VALUE]
ldr r5, [r2, #TI_TP_VALUE + 4]
#ifdef CONFIG_CPU_USE_DOMAINS
+ mrc p15, 0, r6, c3, c0, 0 @ Get domain register
+ str r6, [r1, #TI_CPU_DOMAIN] @ Save old domain register
ldr r6, [r2, #TI_CPU_DOMAIN]
#endif
switch_tls r1, r4, r5, r3, r7
__kuser_cmpxchg64: @ 0xffff0f60
-#if defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG)
-
- /*
- * Poor you. No fast solution possible...
- * The kernel itself must perform the operation.
- * A special ghost syscall is used for that (see traps.c).
- */
- stmfd sp!, {r7, lr}
- ldr r7, 1f @ it's 20 bits
- swi __ARM_NR_cmpxchg64
- ldmfd sp!, {r7, pc}
-1: .word __ARM_NR_cmpxchg64
-
-#elif defined(CONFIG_CPU_32v6K)
+#if defined(CONFIG_CPU_32v6K)
stmfd sp!, {r4, r5, r6, r7}
ldrd r4, r5, [r0] @ load old val
__kuser_cmpxchg: @ 0xffff0fc0
-#if defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG)
-
- /*
- * Poor you. No fast solution possible...
- * The kernel itself must perform the operation.
- * A special ghost syscall is used for that (see traps.c).
- */
- stmfd sp!, {r7, lr}
- ldr r7, 1f @ it's 20 bits
- swi __ARM_NR_cmpxchg
- ldmfd sp!, {r7, pc}
-1: .word __ARM_NR_cmpxchg
-
-#elif __LINUX_ARM_ARCH__ < 6
+#if __LINUX_ARM_ARCH__ < 6
#ifdef CONFIG_MMU