Add the rt linux 4.1.3-rt3 as base

[kvmfornfv.git] / kernel / arch / arm / boot / dts / tny_a9263.dts

diff --git a/kernel/arch/arm/boot/dts/tny_a9263.dts b/kernel/arch/arm/boot/dts/tny_a9263.dts
new file mode 100644 (file)
index 0000000..3043296
--- /dev/null
+++ b/kernel/arch/arm/boot/dts/tny_a9263.dts
@@ -0,0 +1,105 @@
+/*
+ * usb_a9263.dts - Device Tree file for Caloa USB A9293 board
+ *
+ *  Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2 only
+ */
+/dts-v1/;
+#include "at91sam9263.dtsi"
+
+/ {
+       model = "Calao TNY A9263";
+       compatible = "atmel,tny-a9263", "atmel,at91sam9263", "atmel,at91sam9";
+
+       chosen {
+               bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs";
+       };
+
+       memory {
+               reg = <0x20000000 0x4000000>;
+       };
+
+       clocks {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               ranges;
+
+               main_clock: clock@0 {
+                       compatible = "atmel,osc", "fixed-clock";
+                       clock-frequency = <12000000>;
+               };
+
+               slow_xtal {
+                       clock-frequency = <32768>;
+               };
+
+               main_xtal {
+                       clock-frequency = <12000000>;
+               };
+       };
+
+       ahb {
+               apb {
+                       dbgu: serial@ffffee00 {
+                               status = "okay";
+                       };
+
+                       usb1: gadget@fff78000 {
+                               atmel,vbus-gpio = <&pioB 11 GPIO_ACTIVE_HIGH>;
+                               status = "okay";
+                       };
+               };
+
+               nand0: nand@40000000 {
+                       nand-bus-width = <8>;
+                       nand-ecc-mode = "soft";
+                       nand-on-flash-bbt;
+                       status = "okay";
+
+                       at91bootstrap@0 {
+                               label = "at91bootstrap";
+                               reg = <0x0 0x20000>;
+                       };
+
+                       barebox@20000 {
+                               label = "barebox";
+                               reg = <0x20000 0x40000>;
+                       };
+
+                       bareboxenv@60000 {
+                               label = "bareboxenv";
+                               reg = <0x60000 0x20000>;
+                       };
+
+                       bareboxenv2@80000 {
+                               label = "bareboxenv2";
+                               reg = <0x80000 0x20000>;
+                       };
+
+                       oftree@80000 {
+                               label = "oftree";
+                               reg = <0xa0000 0x20000>;
+                       };
+
+                       kernel@a0000 {
+                               label = "kernel";
+                               reg = <0xc0000 0x400000>;
+                       };
+
+                       rootfs@4a0000 {
+                               label = "rootfs";
+                               reg = <0x4c0000 0x7800000>;
+                       };
+
+                       data@7ca0000 {
+                               label = "data";
+                               reg = <0x7cc0000 0x8340000>;
+                       };
+               };
+       };
+
+       i2c@0 {
+               status = "okay";
+       };
+};