Add the rt linux 4.1.3-rt3 as base

[kvmfornfv.git] / kernel / arch / arm / boot / dts / sun7i-a20-m3.dts

diff --git a/kernel/arch/arm/boot/dts/sun7i-a20-m3.dts b/kernel/arch/arm/boot/dts/sun7i-a20-m3.dts
new file mode 100644 (file)
index 0000000..5add9f2
--- /dev/null
+++ b/kernel/arch/arm/boot/dts/sun7i-a20-m3.dts
@@ -0,0 +1,172 @@
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+       model = "Mele M3";
+       compatible = "mele,m3", "allwinner,sun7i-a20";
+
+       soc@01c00000 {
+               mmc0: mmc@01c0f000 {
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+                       vmmc-supply = <&reg_vcc3v3>;
+                       bus-width = <4>;
+                       cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+                       cd-inverted;
+                       status = "okay";
+               };
+
+               mmc2: mmc@01c11000 {
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&mmc2_pins_a>;
+                       vmmc-supply = <&reg_vcc3v3>;
+                       bus-width = <4>;
+                       non-removable;
+                       status = "okay";
+               };
+
+               usbphy: phy@01c13400 {
+                       usb1_vbus-supply = <&reg_usb1_vbus>;
+                       usb2_vbus-supply = <&reg_usb2_vbus>;
+                       status = "okay";
+               };
+
+               ehci0: usb@01c14000 {
+                       status = "okay";
+               };
+
+               ohci0: usb@01c14400 {
+                       status = "okay";
+               };
+
+               ehci1: usb@01c1c000 {
+                       status = "okay";
+               };
+
+               ohci1: usb@01c1c400 {
+                       status = "okay";
+               };
+
+               pinctrl@01c20800 {
+                       led_pins_m3: led_pins@0 {
+                               allwinner,pins = "PH20";
+                               allwinner,function = "gpio_out";
+                               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+                       };
+               };
+
+               ir0: ir@01c21800 {
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&ir0_pins_a>;
+                       status = "okay";
+               };
+
+               uart0: serial@01c28000 {
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&uart0_pins_a>;
+                       status = "okay";
+               };
+
+               i2c0: i2c@01c2ac00 {
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&i2c0_pins_a>;
+                       status = "okay";
+
+                       axp209: pmic@34 {
+                               compatible = "x-powers,axp209";
+                               reg = <0x34>;
+                               interrupt-parent = <&nmi_intc>;
+                               interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+                               interrupt-controller;
+                               #interrupt-cells = <1>;
+                       };
+               };
+
+               gmac: ethernet@01c50000 {
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&gmac_pins_mii_a>;
+                       phy = <&phy1>;
+                       phy-mode = "mii";
+                       status = "okay";
+
+                       phy1: ethernet-phy@1 {
+                               reg = <1>;
+                       };
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+               pinctrl-names = "default";
+               pinctrl-0 = <&led_pins_m3>;
+
+               blue {
+                       label = "m3:blue:usr";
+                       gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
+               };
+       };
+
+       reg_usb1_vbus: usb1-vbus {
+               status = "okay";
+       };
+
+       reg_usb2_vbus: usb2-vbus {
+               status = "okay";
+       };
+};