--- /dev/null
+
+/*
+ * Copyright (C) 2013 STMicroelectronics Limited.
+ * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+#include "st-pincfg.h"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+/ {
+
+ aliases {
+ gpio0 = &pio0;
+ gpio1 = &pio1;
+ gpio2 = &pio2;
+ gpio3 = &pio3;
+ gpio4 = &pio4;
+ gpio5 = &pio40;
+ gpio6 = &pio5;
+ gpio7 = &pio6;
+ gpio8 = &pio7;
+ gpio9 = &pio8;
+ gpio10 = &pio9;
+ gpio11 = &pio10;
+ gpio12 = &pio11;
+ gpio13 = &pio12;
+ gpio14 = &pio30;
+ gpio15 = &pio31;
+ gpio16 = &pio13;
+ gpio17 = &pio14;
+ gpio18 = &pio15;
+ gpio19 = &pio16;
+ gpio20 = &pio17;
+ gpio21 = &pio18;
+ gpio22 = &pio100;
+ gpio23 = &pio101;
+ gpio24 = &pio102;
+ gpio25 = &pio103;
+ gpio26 = &pio104;
+ gpio27 = &pio105;
+ gpio28 = &pio106;
+ gpio29 = &pio107;
+ };
+
+ soc {
+ pin-controller-sbc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,stih416-sbc-pinctrl";
+ st,syscfg = <&syscfg_sbc>;
+ reg = <0xfe61f080 0x4>;
+ reg-names = "irqmux";
+ interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "irqmux";
+ ranges = <0 0xfe610000 0x6000>;
+
+ pio0: gpio@fe610000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0 0x100>;
+ st,bank-name = "PIO0";
+ };
+ pio1: gpio@fe611000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x1000 0x100>;
+ st,bank-name = "PIO1";
+ };
+ pio2: gpio@fe612000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x2000 0x100>;
+ st,bank-name = "PIO2";
+ };
+ pio3: gpio@fe613000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x3000 0x100>;
+ st,bank-name = "PIO3";
+ };
+ pio4: gpio@fe614000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x4000 0x100>;
+ st,bank-name = "PIO4";
+ };
+ pio40: gpio@fe615000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x5000 0x100>;
+ st,bank-name = "PIO40";
+ st,retime-pin-mask = <0x7f>;
+ };
+
+ rc{
+ pinctrl_ir: ir0 {
+ st,pins {
+ ir = <&pio4 0 ALT2 IN>;
+ };
+ };
+ };
+ sbc_serial1 {
+ pinctrl_sbc_serial1: sbc_serial1 {
+ st,pins {
+ tx = <&pio2 6 ALT3 OUT>;
+ rx = <&pio2 7 ALT3 IN>;
+ };
+ };
+ };
+
+ keyscan {
+ pinctrl_keyscan: keyscan {
+ st,pins {
+ keyin0 = <&pio0 2 ALT2 IN>;
+ keyin1 = <&pio0 3 ALT2 IN>;
+ keyin2 = <&pio0 4 ALT2 IN>;
+ keyin3 = <&pio2 6 ALT2 IN>;
+
+ keyout0 = <&pio1 6 ALT2 OUT>;
+ keyout1 = <&pio1 7 ALT2 OUT>;
+ keyout2 = <&pio0 6 ALT2 OUT>;
+ keyout3 = <&pio2 7 ALT2 OUT>;
+ };
+ };
+ };
+
+ sbc_i2c0 {
+ pinctrl_sbc_i2c0_default: sbc_i2c0-default {
+ st,pins {
+ sda = <&pio4 6 ALT1 BIDIR>;
+ scl = <&pio4 5 ALT1 BIDIR>;
+ };
+ };
+ };
+
+ usb {
+ pinctrl_usb3: usb3 {
+ st,pins {
+ oc-detect = <&pio40 0 ALT1 IN>;
+ pwr-enable = <&pio40 1 ALT1 OUT>;
+ };
+ };
+ };
+
+ sbc_i2c1 {
+ pinctrl_sbc_i2c1_default: sbc_i2c1-default {
+ st,pins {
+ sda = <&pio3 2 ALT2 BIDIR>;
+ scl = <&pio3 1 ALT2 BIDIR>;
+ };
+ };
+ };
+
+ gmac1 {
+ pinctrl_mii1: mii1 {
+ st,pins {
+ txd0 = <&pio0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txd1 = <&pio0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txd2 = <&pio0 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txd3 = <&pio0 3 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txer = <&pio0 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txen = <&pio0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>;
+ col = <&pio0 7 ALT1 IN BYPASS 1000>;
+
+ mdio = <&pio1 0 ALT1 OUT BYPASS 1500>;
+ mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
+ crs = <&pio1 2 ALT1 IN BYPASS 1000>;
+ mdint = <&pio1 3 ALT1 IN BYPASS 0>;
+ rxd0 = <&pio1 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ rxd1 = <&pio1 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ rxd2 = <&pio1 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ rxd3 = <&pio1 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+
+ rxdv = <&pio2 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ rx_er = <&pio2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>;
+ phyclk = <&pio2 3 ALT1 OUT NICLK 0 CLK_A>;
+ };
+ };
+ pinctrl_rgmii1: rgmii1-0 {
+ st,pins {
+ txd0 = <&pio0 0 ALT1 OUT DE_IO 500 CLK_A>;
+ txd1 = <&pio0 1 ALT1 OUT DE_IO 500 CLK_A>;
+ txd2 = <&pio0 2 ALT1 OUT DE_IO 500 CLK_A>;
+ txd3 = <&pio0 3 ALT1 OUT DE_IO 500 CLK_A>;
+ txen = <&pio0 5 ALT1 OUT DE_IO 0 CLK_A>;
+ txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>;
+
+ mdio = <&pio1 0 ALT1 OUT BYPASS 0>;
+ mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
+ rxd0 = <&pio1 4 ALT1 IN DE_IO 500 CLK_A>;
+ rxd1 = <&pio1 5 ALT1 IN DE_IO 500 CLK_A>;
+ rxd2 = <&pio1 6 ALT1 IN DE_IO 500 CLK_A>;
+ rxd3 = <&pio1 7 ALT1 IN DE_IO 500 CLK_A>;
+
+ rxdv = <&pio2 0 ALT1 IN DE_IO 500 CLK_A>;
+ rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>;
+ phyclk = <&pio2 3 ALT4 OUT NICLK 0 CLK_B>;
+
+ clk125= <&pio3 7 ALT4 IN NICLK 0 CLK_A>;
+ };
+ };
+ };
+ };
+
+ pin-controller-front {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,stih416-front-pinctrl";
+ st,syscfg = <&syscfg_front>;
+ reg = <0xfee0f080 0x4>;
+ reg-names = "irqmux";
+ interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "irqmux";
+ ranges = <0 0xfee00000 0x10000>;
+
+ pio5: gpio@fee00000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0 0x100>;
+ st,bank-name = "PIO5";
+ };
+ pio6: gpio@fee01000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x1000 0x100>;
+ st,bank-name = "PIO6";
+ };
+ pio7: gpio@fee02000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x2000 0x100>;
+ st,bank-name = "PIO7";
+ };
+ pio8: gpio@fee03000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x3000 0x100>;
+ st,bank-name = "PIO8";
+ };
+ pio9: gpio@fee04000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x4000 0x100>;
+ st,bank-name = "PIO9";
+ };
+ pio10: gpio@fee05000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x5000 0x100>;
+ st,bank-name = "PIO10";
+ };
+ pio11: gpio@fee06000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x6000 0x100>;
+ st,bank-name = "PIO11";
+ };
+ pio12: gpio@fee07000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x7000 0x100>;
+ st,bank-name = "PIO12";
+ };
+ pio30: gpio@fee08000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x8000 0x100>;
+ st,bank-name = "PIO30";
+ };
+ pio31: gpio@fee09000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x9000 0x100>;
+ st,bank-name = "PIO31";
+ };
+
+ serial2-oe {
+ pinctrl_serial2_oe: serial2-1 {
+ st,pins {
+ output-enable = <&pio11 3 ALT2 OUT>;
+ };
+ };
+ };
+
+ i2c0 {
+ pinctrl_i2c0_default: i2c0-default {
+ st,pins {
+ sda = <&pio9 3 ALT1 BIDIR>;
+ scl = <&pio9 2 ALT1 BIDIR>;
+ };
+ };
+ };
+
+ usb {
+ pinctrl_usb0: usb0 {
+ st,pins {
+ oc-detect = <&pio9 4 ALT1 IN>;
+ pwr-enable = <&pio9 5 ALT1 OUT>;
+ };
+ };
+ };
+
+
+ i2c1 {
+ pinctrl_i2c1_default: i2c1-default {
+ st,pins {
+ sda = <&pio12 1 ALT1 BIDIR>;
+ scl = <&pio12 0 ALT1 BIDIR>;
+ };
+ };
+ };
+
+ fsm {
+ pinctrl_fsm: fsm {
+ st,pins {
+ spi-fsm-clk = <&pio12 2 ALT1 OUT>;
+ spi-fsm-cs = <&pio12 3 ALT1 OUT>;
+ spi-fsm-mosi = <&pio12 4 ALT1 OUT>;
+ spi-fsm-miso = <&pio12 5 ALT1 IN>;
+ spi-fsm-hol = <&pio12 6 ALT1 OUT>;
+ spi-fsm-wp = <&pio12 7 ALT1 OUT>;
+ };
+ };
+ };
+ };
+
+ pin-controller-rear {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,stih416-rear-pinctrl";
+ st,syscfg = <&syscfg_rear>;
+ reg = <0xfe82f080 0x4>;
+ reg-names = "irqmux";
+ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "irqmux";
+ ranges = <0 0xfe820000 0x6000>;
+
+ pio13: gpio@fe820000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0 0x100>;
+ st,bank-name = "PIO13";
+ };
+ pio14: gpio@fe821000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x1000 0x100>;
+ st,bank-name = "PIO14";
+ };
+ pio15: gpio@fe822000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x2000 0x100>;
+ st,bank-name = "PIO15";
+ };
+ pio16: gpio@fe823000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x3000 0x100>;
+ st,bank-name = "PIO16";
+ };
+ pio17: gpio@fe824000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x4000 0x100>;
+ st,bank-name = "PIO17";
+ };
+ pio18: gpio@fe825000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x5000 0x100>;
+ st,bank-name = "PIO18";
+ st,retime-pin-mask = <0xf>;
+ };
+
+ serial2 {
+ pinctrl_serial2: serial2-0 {
+ st,pins {
+ tx = <&pio17 4 ALT2 OUT>;
+ rx = <&pio17 5 ALT2 IN>;
+ };
+ };
+ };
+
+ gmac0 {
+ pinctrl_mii0: mii0 {
+ st,pins {
+ mdint = <&pio13 6 ALT2 IN BYPASS 0>;
+ txen = <&pio13 7 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+ txd0 = <&pio14 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+ txd1 = <&pio14 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+ txd2 = <&pio14 2 ALT2 OUT SE_NICLK_IO 0 CLK_B>;
+ txd3 = <&pio14 3 ALT2 OUT SE_NICLK_IO 0 CLK_B>;
+
+ txclk = <&pio15 0 ALT2 IN NICLK 0 CLK_A>;
+ txer = <&pio15 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+ crs = <&pio15 2 ALT2 IN BYPASS 1000>;
+ col = <&pio15 3 ALT2 IN BYPASS 1000>;
+ mdio= <&pio15 4 ALT2 OUT BYPASS 1500>;
+ mdc = <&pio15 5 ALT2 OUT NICLK 0 CLK_B>;
+
+ rxd0 = <&pio16 0 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+ rxd1 = <&pio16 1 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+ rxd2 = <&pio16 2 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+ rxd3 = <&pio16 3 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+ rxdv = <&pio15 6 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+ rx_er = <&pio15 7 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+ rxclk = <&pio17 0 ALT2 IN NICLK 0 CLK_A>;
+ phyclk = <&pio13 5 ALT2 OUT NICLK 0 CLK_B>;
+ };
+ };
+
+ pinctrl_gmii0: gmii0 {
+ st,pins {
+ };
+ };
+ pinctrl_rgmii0: rgmii0 {
+ st,pins {
+ phyclk = <&pio13 5 ALT4 OUT NICLK 0 CLK_B>;
+ txen = <&pio13 7 ALT2 OUT DE_IO 0 CLK_A>;
+ txd0 = <&pio14 0 ALT2 OUT DE_IO 500 CLK_A>;
+ txd1 = <&pio14 1 ALT2 OUT DE_IO 500 CLK_A>;
+ txd2 = <&pio14 2 ALT2 OUT DE_IO 500 CLK_B>;
+ txd3 = <&pio14 3 ALT2 OUT DE_IO 500 CLK_B>;
+ txclk = <&pio15 0 ALT2 IN NICLK 0 CLK_A>;
+
+ mdio = <&pio15 4 ALT2 OUT BYPASS 0>;
+ mdc = <&pio15 5 ALT2 OUT NICLK 0 CLK_B>;
+
+ rxdv = <&pio15 6 ALT2 IN DE_IO 500 CLK_A>;
+ rxd0 =<&pio16 0 ALT2 IN DE_IO 500 CLK_A>;
+ rxd1 =<&pio16 1 ALT2 IN DE_IO 500 CLK_A>;
+ rxd2 =<&pio16 2 ALT2 IN DE_IO 500 CLK_A>;
+ rxd3 =<&pio16 3 ALT2 IN DE_IO 500 CLK_A>;
+ rxclk =<&pio17 0 ALT2 IN NICLK 0 CLK_A>;
+
+ clk125=<&pio17 6 ALT1 IN NICLK 0 CLK_A>;
+ };
+ };
+ };
+
+ mmc0 {
+ pinctrl_mmc0: mmc0 {
+ st,pins {
+ mmcclk = <&pio13 4 ALT4 BIDIR_PU NICLK 0 CLK_B>;
+ data0 = <&pio14 4 ALT4 BIDIR_PU BYPASS 0>;
+ data1 = <&pio14 5 ALT4 BIDIR_PU BYPASS 0>;
+ data2 = <&pio14 6 ALT4 BIDIR_PU BYPASS 0>;
+ data3 = <&pio14 7 ALT4 BIDIR_PU BYPASS 0>;
+ cmd = <&pio15 1 ALT4 BIDIR_PU BYPASS 0>;
+ wp = <&pio15 3 ALT4 IN>;
+ data4 = <&pio16 4 ALT4 BIDIR_PU BYPASS 0>;
+ data5 = <&pio16 5 ALT4 BIDIR_PU BYPASS 0>;
+ data6 = <&pio16 6 ALT4 BIDIR_PU BYPASS 0>;
+ data7 = <&pio16 7 ALT4 BIDIR_PU BYPASS 0>;
+ pwr = <&pio17 1 ALT4 OUT>;
+ cd = <&pio17 2 ALT4 IN>;
+ led = <&pio17 3 ALT4 OUT>;
+ };
+ };
+ };
+ mmc1 {
+ pinctrl_mmc1: mmc1 {
+ st,pins {
+ mmcclk = <&pio15 0 ALT3 BIDIR_PU NICLK 0 CLK_B>;
+ data0 = <&pio13 7 ALT3 BIDIR_PU BYPASS 0>;
+ data1 = <&pio14 1 ALT3 BIDIR_PU BYPASS 0>;
+ data2 = <&pio14 2 ALT3 BIDIR_PU BYPASS 0>;
+ data3 = <&pio14 3 ALT3 BIDIR_PU BYPASS 0>;
+ cmd = <&pio15 4 ALT3 BIDIR_PU BYPASS 0>;
+ data4 = <&pio15 6 ALT3 BIDIR_PU BYPASS 0>;
+ data5 = <&pio15 7 ALT3 BIDIR_PU BYPASS 0>;
+ data6 = <&pio16 0 ALT3 BIDIR_PU BYPASS 0>;
+ data7 = <&pio16 1 ALT3 BIDIR_PU BYPASS 0>;
+ pwr = <&pio16 2 ALT3 OUT>;
+ nreset = <&pio13 6 ALT3 OUT>;
+ };
+ };
+ };
+
+ usb {
+ pinctrl_usb1: usb1 {
+ st,pins {
+ oc-detect = <&pio18 0 ALT1 IN>;
+ pwr-enable = <&pio18 1 ALT1 OUT>;
+ };
+ };
+ pinctrl_usb2: usb2 {
+ st,pins {
+ oc-detect = <&pio18 2 ALT1 IN>;
+ pwr-enable = <&pio18 3 ALT1 OUT>;
+ };
+ };
+ };
+ };
+
+ pin-controller-fvdp-fe {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,stih416-fvdp-fe-pinctrl";
+ st,syscfg = <&syscfg_fvdp_fe>;
+ reg = <0xfd6bf080 0x4>;
+ reg-names = "irqmux";
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "irqmux";
+ ranges = <0 0xfd6b0000 0x3000>;
+
+ pio100: gpio@fd6b0000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0 0x100>;
+ st,bank-name = "PIO100";
+ };
+ pio101: gpio@fd6b1000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x1000 0x100>;
+ st,bank-name = "PIO101";
+ };
+ pio102: gpio@fd6b2000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x2000 0x100>;
+ st,bank-name = "PIO102";
+ };
+ };
+
+ pin-controller-fvdp-lite {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,stih416-fvdp-lite-pinctrl";
+ st,syscfg = <&syscfg_fvdp_lite>;
+ reg = <0xfd33f080 0x4>;
+ reg-names = "irqmux";
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "irqmux";
+ ranges = <0 0xfd330000 0x5000>;
+
+ pio103: gpio@fd330000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0 0x100>;
+ st,bank-name = "PIO103";
+ };
+ pio104: gpio@fd331000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x1000 0x100>;
+ st,bank-name = "PIO104";
+ };
+ pio105: gpio@fd332000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x2000 0x100>;
+ st,bank-name = "PIO105";
+ };
+ pio106: gpio@fd333000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x3000 0x100>;
+ st,bank-name = "PIO106";
+ };
+
+ pio107: gpio@fd334000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x4000 0x100>;
+ st,bank-name = "PIO107";
+ st,retime-pin-mask = <0xf>;
+ };
+ };
+ };
+};
Code Review / kvmfornfv.git / blobdiff