--- /dev/null
+/*
+ * Device Tree for the ST-Ericsson Nomadik 8815 STn8815 SoC
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include "skeleton.dtsi"
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ memory {
+ reg = <0x00000000 0x04000000>,
+ <0x08000000 0x04000000>;
+ };
+
+ L2: l2-cache {
+ compatible = "arm,l210-cache";
+ reg = <0x10210000 0x1000>;
+ interrupt-parent = <&vica>;
+ interrupts = <30>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ mtu0: mtu@101e2000 {
+ /* Nomadik system timer */
+ compatible = "st,nomadik-mtu";
+ reg = <0x101e2000 0x1000>;
+ interrupt-parent = <&vica>;
+ interrupts = <4>;
+ clocks = <&timclk>, <&pclk>;
+ clock-names = "timclk", "apb_pclk";
+ };
+
+ mtu1: mtu@101e3000 {
+ /* Secondary timer */
+ reg = <0x101e3000 0x1000>;
+ interrupt-parent = <&vica>;
+ interrupts = <5>;
+ clocks = <&timclk>, <&pclk>;
+ clock-names = "timclk", "apb_pclk";
+ };
+
+ gpio0: gpio@101e4000 {
+ compatible = "st,nomadik-gpio";
+ reg = <0x101e4000 0x80>;
+ interrupt-parent = <&vica>;
+ interrupts = <6>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-bank = <0>;
+ clocks = <&pclk>;
+ };
+
+ gpio1: gpio@101e5000 {
+ compatible = "st,nomadik-gpio";
+ reg = <0x101e5000 0x80>;
+ interrupt-parent = <&vica>;
+ interrupts = <7>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-bank = <1>;
+ clocks = <&pclk>;
+ };
+
+ gpio2: gpio@101e6000 {
+ compatible = "st,nomadik-gpio";
+ reg = <0x101e6000 0x80>;
+ interrupt-parent = <&vica>;
+ interrupts = <8>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-bank = <2>;
+ clocks = <&pclk>;
+ };
+
+ gpio3: gpio@101e7000 {
+ compatible = "st,nomadik-gpio";
+ reg = <0x101e7000 0x80>;
+ interrupt-parent = <&vica>;
+ interrupts = <9>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-bank = <3>;
+ clocks = <&pclk>;
+ };
+
+ pinctrl {
+ compatible = "stericsson,stn8815-pinctrl";
+ /* Pin configurations */
+ uart0 {
+ uart0_default_mux: uart0_mux {
+ u0_default_mux {
+ function = "u0";
+ groups = "u0_a_1";
+ };
+ };
+ };
+ uart1 {
+ uart1_default_mux: uart1_mux {
+ u1_default_mux {
+ function = "u1";
+ groups = "u1_a_1";
+ };
+ };
+ };
+ mmcsd {
+ mmcsd_default_mux: mmcsd_mux {
+ mmcsd_default_mux {
+ function = "mmcsd";
+ groups = "mmcsd_a_1", "mmcsd_b_1";
+ };
+ };
+ mmcsd_default_mode: mmcsd_default {
+ mmcsd_default_cfg1 {
+ /* MCCLK */
+ pins = "GPIO8_B10";
+ ste,output = <0>;
+ };
+ mmcsd_default_cfg2 {
+ /* MCCMDDIR, MCDAT0DIR, MCDAT31DIR, MCDATDIR2 */
+ pins = "GPIO10_C11", "GPIO15_A12",
+ "GPIO16_C13", "GPIO23_D15";
+ ste,output = <1>;
+ };
+ mmcsd_default_cfg3 {
+ /* MCCMD, MCDAT3-0, MCMSFBCLK */
+ pins = "GPIO9_A10", "GPIO11_B11",
+ "GPIO12_A11", "GPIO13_C12",
+ "GPIO14_B12", "GPIO24_C15";
+ ste,input = <1>;
+ };
+ };
+ };
+ i2c0 {
+ i2c0_default_mux: i2c0_mux {
+ i2c0_default_mux {
+ function = "i2c0";
+ groups = "i2c0_a_1";
+ };
+ };
+ i2c0_default_mode: i2c0_default {
+ i2c0_default_cfg {
+ pins = "GPIO62_D3", "GPIO63_D2";
+ ste,input = <0>;
+ };
+ };
+ };
+ i2c1 {
+ i2c1_default_mux: i2c1_mux {
+ i2c1_default_mux {
+ function = "i2c1";
+ groups = "i2c1_a_1";
+ };
+ };
+ i2c1_default_mode: i2c1_default {
+ i2c1_default_cfg {
+ pins = "GPIO53_L4", "GPIO54_L3";
+ ste,input = <0>;
+ };
+ };
+ };
+ };
+
+ src: src@101e0000 {
+ compatible = "stericsson,nomadik-src";
+ reg = <0x101e0000 0x1000>;
+
+ /*
+ * MXTAL "Main Chrystal" is a chrystal oscillator @19.2 MHz
+ * that is parent of TIMCLK, PLL1 and PLL2
+ */
+ mxtal: mxtal@19.2M {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <19200000>;
+ };
+
+ /*
+ * The 2.4 MHz TIMCLK reference clock is active at
+ * boot time, this is actually the MXTALCLK @19.2 MHz
+ * divided by 8. This clock is used by the timers and
+ * watchdog. See page 105 ff.
+ */
+ timclk: timclk@2.4M {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <8>;
+ clock-mult = <1>;
+ clocks = <&mxtal>;
+ };
+
+ /* PLL1 is locked to MXTALI and variable from 20.4 to 334 MHz */
+ pll1: pll1@0 {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-pll-clock";
+ pll-id = <1>;
+ clocks = <&mxtal>;
+ };
+
+ /* HCLK divides the PLL1 with 1,2,3 or 4 */
+ hclk: hclk@0 {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-hclk-clock";
+ clocks = <&pll1>;
+ };
+ /* The PCLK domain uses HCLK right off */
+ pclk: pclk@0 {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <1>;
+ clock-mult = <1>;
+ clocks = <&hclk>;
+ };
+
+ /* PLL2 is usually 864 MHz and divided into a few fixed rates */
+ pll2: pll2@0 {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-pll-clock";
+ pll-id = <2>;
+ clocks = <&mxtal>;
+ };
+ clk216: clk216@216M {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <4>;
+ clock-mult = <1>;
+ clocks = <&pll2>;
+ };
+ clk108: clk108@108M {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <2>;
+ clock-mult = <1>;
+ clocks = <&clk216>;
+ };
+ clk72: clk72@72M {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ /* The data sheet does not say how this is derived */
+ clock-div = <12>;
+ clock-mult = <1>;
+ clocks = <&pll2>;
+ };
+ clk48: clk48@48M {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ /* The data sheet does not say how this is derived */
+ clock-div = <18>;
+ clock-mult = <1>;
+ clocks = <&pll2>;
+ };
+ clk27: clk27@27M {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <4>;
+ clock-mult = <1>;
+ clocks = <&clk108>;
+ };
+
+ /* This apparently exists as well */
+ ulpiclk: ulpiclk@60M {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <60000000>;
+ };
+
+ /*
+ * IP AMBA bus clocks, driving the bus side of the
+ * peripheral clocking, clock gates.
+ */
+
+ hclkdma0: hclkdma0@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <0>;
+ clocks = <&hclk>;
+ };
+ hclksmc: hclksmc@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <1>;
+ clocks = <&hclk>;
+ };
+ hclksdram: hclksdram@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <2>;
+ clocks = <&hclk>;
+ };
+ hclkdma1: hclkdma1@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <3>;
+ clocks = <&hclk>;
+ };
+ hclkclcd: hclkclcd@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <4>;
+ clocks = <&hclk>;
+ };
+ pclkirda: pclkirda@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <5>;
+ clocks = <&pclk>;
+ };
+ pclkssp: pclkssp@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <6>;
+ clocks = <&pclk>;
+ };
+ pclkuart0: pclkuart0@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <7>;
+ clocks = <&pclk>;
+ };
+ pclksdi: pclksdi@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <8>;
+ clocks = <&pclk>;
+ };
+ pclki2c0: pclki2c0@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <9>;
+ clocks = <&pclk>;
+ };
+ pclki2c1: pclki2c1@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <10>;
+ clocks = <&pclk>;
+ };
+ pclkuart1: pclkuart1@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <11>;
+ clocks = <&pclk>;
+ };
+ pclkmsp0: pclkmsp0@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <12>;
+ clocks = <&pclk>;
+ };
+ hclkusb: hclkusb@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <13>;
+ clocks = <&hclk>;
+ };
+ hclkdif: hclkdif@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <14>;
+ clocks = <&hclk>;
+ };
+ hclksaa: hclksaa@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <15>;
+ clocks = <&hclk>;
+ };
+ hclksva: hclksva@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <16>;
+ clocks = <&hclk>;
+ };
+ pclkhsi: pclkhsi@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <17>;
+ clocks = <&pclk>;
+ };
+ pclkxti: pclkxti@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <18>;
+ clocks = <&pclk>;
+ };
+ pclkuart2: pclkuart2@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <19>;
+ clocks = <&pclk>;
+ };
+ pclkmsp1: pclkmsp1@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <20>;
+ clocks = <&pclk>;
+ };
+ pclkmsp2: pclkmsp2@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <21>;
+ clocks = <&pclk>;
+ };
+ pclkowm: pclkowm@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <22>;
+ clocks = <&pclk>;
+ };
+ hclkhpi: hclkhpi@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <23>;
+ clocks = <&hclk>;
+ };
+ pclkske: pclkske@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <24>;
+ clocks = <&pclk>;
+ };
+ pclkhsem: pclkhsem@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <25>;
+ clocks = <&pclk>;
+ };
+ hclk3d: hclk3d@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <26>;
+ clocks = <&hclk>;
+ };
+ hclkhash: hclkhash@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <27>;
+ clocks = <&hclk>;
+ };
+ hclkcryp: hclkcryp@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <28>;
+ clocks = <&hclk>;
+ };
+ pclkmshc: pclkmshc@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <29>;
+ clocks = <&pclk>;
+ };
+ hclkusbm: hclkusbm@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <30>;
+ clocks = <&hclk>;
+ };
+ hclkrng: hclkrng@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <31>;
+ clocks = <&hclk>;
+ };
+
+ /* IP kernel clocks */
+ clcdclk: clcdclk@0 {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <36>;
+ clocks = <&clk72 &clk48>;
+ };
+ irdaclk: irdaclk@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <37>;
+ clocks = <&clk48>;
+ };
+ sspiclk: sspiclk@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <38>;
+ clocks = <&clk48>;
+ };
+ uart0clk: uart0clk@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <39>;
+ clocks = <&clk48>;
+ };
+ sdiclk: sdiclk@48M {
+ /* Also called MCCLK in some documents */
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <40>;
+ clocks = <&clk48>;
+ };
+ i2c0clk: i2c0clk@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <41>;
+ clocks = <&clk48>;
+ };
+ i2c1clk: i2c1clk@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <42>;
+ clocks = <&clk48>;
+ };
+ uart1clk: uart1clk@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <43>;
+ clocks = <&clk48>;
+ };
+ mspclk0: mspclk0@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <44>;
+ clocks = <&clk48>;
+ };
+ usbclk: usbclk@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <45>;
+ clocks = <&clk48>; /* 48 MHz not ULPI */
+ };
+ difclk: difclk@72M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <46>;
+ clocks = <&clk72>;
+ };
+ ipi2cclk: ipi2cclk@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <47>;
+ clocks = <&clk48>; /* Guess */
+ };
+ ipbmcclk: ipbmcclk@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <48>;
+ clocks = <&clk48>; /* Guess */
+ };
+ hsiclkrx: hsiclkrx@216M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <49>;
+ clocks = <&clk216>;
+ };
+ hsiclktx: hsiclktx@108M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <50>;
+ clocks = <&clk108>;
+ };
+ uart2clk: uart2clk@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <51>;
+ clocks = <&clk48>;
+ };
+ mspclk1: mspclk1@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <52>;
+ clocks = <&clk48>;
+ };
+ mspclk2: mspclk2@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <53>;
+ clocks = <&clk48>;
+ };
+ owmclk: owmclk@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <54>;
+ clocks = <&clk48>; /* Guess */
+ };
+ skeclk: skeclk@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <56>;
+ clocks = <&clk48>; /* Guess */
+ };
+ x3dclk: x3dclk@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <58>;
+ clocks = <&clk48>; /* Guess */
+ };
+ pclkmsp3: pclkmsp3@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <59>;
+ clocks = <&pclk>;
+ };
+ mspclk3: mspclk3@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <60>;
+ clocks = <&clk48>;
+ };
+ mshcclk: mshcclk@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <61>;
+ clocks = <&clk48>; /* Guess */
+ };
+ usbmclk: usbmclk@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <62>;
+ /* Stated as "48 MHz not ULPI clock" */
+ clocks = <&clk48>;
+ };
+ rngcclk: rngcclk@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <63>;
+ clocks = <&clk48>; /* Guess */
+ };
+ };
+
+ /* A NAND flash of 128 MiB */
+ fsmc: flash@40000000 {
+ compatible = "stericsson,fsmc-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x10100000 0x1000>, /* FSMC Register*/
+ <0x40000000 0x2000>, /* NAND Base DATA */
+ <0x41000000 0x2000>, /* NAND Base ADDR */
+ <0x40800000 0x2000>; /* NAND Base CMD */
+ reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
+ clocks = <&hclksmc>;
+ status = "okay";
+ timings = /bits/ 8 <0 0 0 0x10 0x0a 0>;
+
+ partition@0 {
+ label = "X-Loader(NAND)";
+ reg = <0x0 0x40000>;
+ };
+ partition@40000 {
+ label = "MemInit(NAND)";
+ reg = <0x40000 0x40000>;
+ };
+ partition@80000 {
+ label = "BootLoader(NAND)";
+ reg = <0x80000 0x200000>;
+ };
+ partition@280000 {
+ label = "Kernel zImage(NAND)";
+ reg = <0x280000 0x300000>;
+ };
+ partition@580000 {
+ label = "Root Filesystem(NAND)";
+ reg = <0x580000 0x1600000>;
+ };
+ partition@1b80000 {
+ label = "User Filesystem(NAND)";
+ reg = <0x1b80000 0x6480000>;
+ };
+ };
+
+ /* I2C0 connected to the STw4811 power management chip */
+ i2c0 {
+ compatible = "st,nomadik-i2c", "arm,primecell";
+ reg = <0x101f8000 0x1000>;
+ interrupt-parent = <&vica>;
+ interrupts = <20>;
+ clock-frequency = <100000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&i2c0clk>, <&pclki2c0>;
+ clock-names = "mclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_default_mux>, <&i2c0_default_mode>;
+
+ stw4811@2d {
+ compatible = "st,stw4811";
+ reg = <0x2d>;
+ vmmc_regulator: vmmc {
+ compatible = "st,stw481x-vmmc";
+ regulator-name = "VMMC";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ };
+ };
+
+ /* I2C1 connected to various sensors */
+ i2c1 {
+ compatible = "st,nomadik-i2c", "arm,primecell";
+ reg = <0x101f7000 0x1000>;
+ interrupt-parent = <&vica>;
+ interrupts = <21>;
+ clock-frequency = <100000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&i2c1clk>, <&pclki2c1>;
+ clock-names = "mclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_default_mux>, <&i2c1_default_mode>;
+
+ camera@2d {
+ compatible = "st,camera";
+ reg = <0x10>;
+ };
+ stw5095@1a {
+ compatible = "st,stw5095";
+ reg = <0x1a>;
+ };
+ lis3lv02dl@1d {
+ compatible = "st,lis3lv02dl";
+ reg = <0x1d>;
+ };
+ };
+
+ amba {
+ compatible = "arm,amba-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ vica: intc@10140000 {
+ compatible = "arm,versatile-vic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x10140000 0x20>;
+ };
+
+ vicb: intc@10140020 {
+ compatible = "arm,versatile-vic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x10140020 0x20>;
+ };
+
+ uart0: uart@101fd000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x101fd000 0x1000>;
+ interrupt-parent = <&vica>;
+ interrupts = <12>;
+ clocks = <&uart0clk>, <&pclkuart0>;
+ clock-names = "uartclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_default_mux>;
+ };
+
+ uart1: uart@101fb000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x101fb000 0x1000>;
+ interrupt-parent = <&vica>;
+ interrupts = <17>;
+ clocks = <&uart1clk>, <&pclkuart1>;
+ clock-names = "uartclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_default_mux>;
+ };
+
+ uart2: uart@101f2000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x101f2000 0x1000>;
+ interrupt-parent = <&vica>;
+ interrupts = <28>;
+ clocks = <&uart2clk>, <&pclkuart2>;
+ clock-names = "uartclk", "apb_pclk";
+ status = "disabled";
+ };
+
+ rng: rng@101b0000 {
+ compatible = "arm,primecell";
+ reg = <0x101b0000 0x1000>;
+ clocks = <&rngcclk>, <&hclkrng>;
+ clock-names = "rng", "apb_pclk";
+ };
+
+ rtc: rtc@101e8000 {
+ compatible = "arm,pl031", "arm,primecell";
+ reg = <0x101e8000 0x1000>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ interrupt-parent = <&vica>;
+ interrupts = <10>;
+ };
+
+ mmcsd: sdi@101f6000 {
+ compatible = "arm,pl18x", "arm,primecell";
+ reg = <0x101f6000 0x1000>;
+ clocks = <&sdiclk>, <&pclksdi>;
+ clock-names = "mclk", "apb_pclk";
+ interrupt-parent = <&vica>;
+ interrupts = <22>;
+ max-frequency = <48000000>;
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmcsd_default_mux>, <&mmcsd_default_mode>;
+ vmmc-supply = <&vmmc_regulator>;
+ };
+ };
+};
Code Review / kvmfornfv.git / blobdiff