These changes are the raw update to linux-4.4.6-rt14. Kernel sources

[kvmfornfv.git] / kernel / arch / arm / boot / dts / r8a7794-silk.dts

diff --git a/kernel/arch/arm/boot/dts/r8a7794-silk.dts b/kernel/arch/arm/boot/dts/r8a7794-silk.dts
new file mode 100644 (file)
index 0000000..48ff3e2
--- /dev/null
+++ b/kernel/arch/arm/boot/dts/r8a7794-silk.dts
@@ -0,0 +1,216 @@
+/*
+ * Device Tree Source for the SILK board
+ *
+ * Copyright (C) 2014 Renesas Electronics Corporation
+ * Copyright (C) 2014-2015 Renesas Solutions Corp.
+ * Copyright (C) 2014-2015 Cogent Embedded, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "r8a7794.dtsi"
+
+/ {
+       model = "SILK";
+       compatible = "renesas,silk", "renesas,r8a7794";
+
+       aliases {
+               serial0 = &scif2;
+       };
+
+       chosen {
+               bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+               stdout-path = &scif2;
+       };
+
+       memory@40000000 {
+               device_type = "memory";
+               reg = <0 0x40000000 0 0x40000000>;
+       };
+
+       d3_3v: regulator@0 {
+               compatible = "regulator-fixed";
+               regulator-name = "D3.3V";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               regulator-boot-on;
+               regulator-always-on;
+       };
+};
+
+&extal_clk {
+       clock-frequency = <20000000>;
+};
+
+&pfc {
+       scif2_pins: serial2 {
+               renesas,groups = "scif2_data";
+               renesas,function = "scif2";
+       };
+
+       ether_pins: ether {
+               renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
+               renesas,function = "eth";
+       };
+
+       phy1_pins: phy1 {
+               renesas,groups = "intc_irq8";
+               renesas,function = "intc";
+       };
+
+       i2c1_pins: i2c1 {
+               renesas,groups = "i2c1";
+               renesas,function = "i2c1";
+       };
+
+       mmcif0_pins: mmcif0 {
+               renesas,groups = "mmc_data8", "mmc_ctrl";
+               renesas,function = "mmc";
+       };
+
+       qspi_pins: spi0 {
+               renesas,groups = "qspi_ctrl", "qspi_data4";
+               renesas,function = "qspi";
+       };
+
+       vin0_pins: vin0 {
+               renesas,groups = "vin0_data8", "vin0_clk";
+               renesas,function = "vin0";
+       };
+
+       usb0_pins: usb0 {
+               renesas,groups = "usb0";
+               renesas,function = "usb0";
+       };
+
+       usb1_pins: usb1 {
+               renesas,groups = "usb1";
+               renesas,function = "usb1";
+       };
+};
+
+&scif2 {
+       pinctrl-0 = <&scif2_pins>;
+       pinctrl-names = "default";
+
+       status = "okay";
+};
+
+&ether {
+       pinctrl-0 = <&ether_pins &phy1_pins>;
+       pinctrl-names = "default";
+
+       phy-handle = <&phy1>;
+       renesas,ether-link-active-low;
+       status = "okay";
+
+       phy1: ethernet-phy@1 {
+               reg = <1>;
+               interrupt-parent = <&irqc0>;
+               interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+               micrel,led-mode = <1>;
+       };
+};
+
+&i2c1 {
+       pinctrl-0 = <&i2c1_pins>;
+       pinctrl-names = "default";
+
+       status = "okay";
+       clock-frequency = <400000>;
+
+       composite-in@20 {
+               compatible = "adi,adv7180";
+               reg = <0x20>;
+               remote = <&vin0>;
+
+               port {
+                       adv7180: endpoint {
+                               bus-width = <8>;
+                               remote-endpoint = <&vin0ep>;
+                       };
+               };
+       };
+};
+
+&mmcif0 {
+       pinctrl-0 = <&mmcif0_pins>;
+       pinctrl-names = "default";
+
+       vmmc-supply = <&d3_3v>;
+       vqmmc-supply = <&d3_3v>;
+       bus-width = <8>;
+       non-removable;
+       status = "okay";
+};
+
+&qspi {
+       pinctrl-0 = <&qspi_pins>;
+       pinctrl-names = "default";
+
+       status = "okay";
+
+       flash@0 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "spansion,s25fl512s", "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <30000000>;
+               spi-tx-bus-width = <4>;
+               spi-rx-bus-width = <4>;
+               spi-cpol;
+               spi-cpha;
+               m25p,fast-read;
+
+               partition@0 {
+                       label = "loader";
+                       reg = <0x00000000 0x00040000>;
+                       read-only;
+               };
+               partition@40000 {
+                       label = "user";
+                       reg = <0x00040000 0x00400000>;
+                       read-only;
+               };
+               partition@440000 {
+                       label = "flash";
+                       reg = <0x00440000 0x03bc0000>;
+               };
+       };
+};
+
+/* composite video input */
+&vin0 {
+       status = "okay";
+       pinctrl-0 = <&vin0_pins>;
+       pinctrl-names = "default";
+
+       port {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               vin0ep: endpoint {
+                       remote-endpoint = <&adv7180>;
+                       bus-width = <8>;
+               };
+       };
+};
+
+&pci0 {
+       status = "okay";
+       pinctrl-0 = <&usb0_pins>;
+       pinctrl-names = "default";
+};
+
+&pci1 {
+       status = "okay";
+       pinctrl-0 = <&usb1_pins>;
+       pinctrl-names = "default";
+};
+
+&usbphy {
+       status = "okay";
+};