--- /dev/null
+/*
+ * Copyright (C) 2011-2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include "elpida_ecb240abacn.dtsi"
+
+/ {
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>; /* 1 GB */
+ };
+
+ aliases {
+ display0 = &dvi0;
+ display1 = &hdmi0;
+ };
+
+ leds: leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &led_wkgpio_pins
+ >;
+
+ heartbeat {
+ label = "pandaboard::status1";
+ gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ mmc {
+ label = "pandaboard::status2";
+ gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "mmc0";
+ };
+ };
+
+ sound: sound {
+ compatible = "ti,abe-twl6040";
+ ti,model = "PandaBoard";
+
+ ti,mclk-freq = <38400000>;
+
+ ti,mcpdm = <&mcpdm>;
+
+ ti,twl6040 = <&twl6040>;
+
+ /* Audio routing */
+ ti,audio-routing =
+ "Headset Stereophone", "HSOL",
+ "Headset Stereophone", "HSOR",
+ "Ext Spk", "HFL",
+ "Ext Spk", "HFR",
+ "Line Out", "AUXL",
+ "Line Out", "AUXR",
+ "HSMIC", "Headset Mic",
+ "Headset Mic", "Headset Mic Bias",
+ "AFML", "Line In",
+ "AFMR", "Line In";
+ };
+
+ /* HS USB Port 1 Power */
+ hsusb1_power: hsusb1_power_reg {
+ compatible = "regulator-fixed";
+ regulator-name = "hsusb1_vbus";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio1 1 0>; /* gpio_1 */
+ startup-delay-us = <70000>;
+ enable-active-high;
+ /*
+ * boot-on is required along with always-on as the
+ * regulator framework doesn't enable the regulator
+ * if boot-on is not there.
+ */
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ /* HS USB Host PHY on PORT 1 */
+ hsusb1_phy: hsusb1_phy {
+ compatible = "usb-nop-xceiv";
+ reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; /* gpio_62 */
+ vcc-supply = <&hsusb1_power>;
+ clocks = <&auxclk3_ck>;
+ clock-names = "main_clk";
+ clock-frequency = <19200000>;
+ };
+
+ /* regulator for wl12xx on sdio5 */
+ wl12xx_vmmc: wl12xx_vmmc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&wl12xx_gpio>;
+ compatible = "regulator-fixed";
+ regulator-name = "vwl1271";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&gpio2 11 0>;
+ startup-delay-us = <70000>;
+ enable-active-high;
+ };
+
+ tfp410: encoder@0 {
+ compatible = "ti,tfp410";
+ powerdown-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; /* gpio_0 */
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ tfp410_in: endpoint@0 {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ tfp410_out: endpoint@0 {
+ remote-endpoint = <&dvi_connector_in>;
+ };
+ };
+ };
+ };
+
+ dvi0: connector@0 {
+ compatible = "dvi-connector";
+ label = "dvi";
+
+ digital;
+
+ ddc-i2c-bus = <&i2c3>;
+
+ port {
+ dvi_connector_in: endpoint {
+ remote-endpoint = <&tfp410_out>;
+ };
+ };
+ };
+
+ tpd12s015: encoder@1 {
+ compatible = "ti,tpd12s015";
+
+ gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>, /* 60, CT CP HPD */
+ <&gpio2 9 GPIO_ACTIVE_HIGH>, /* 41, LS OE */
+ <&gpio2 31 GPIO_ACTIVE_HIGH>; /* 63, HPD */
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ tpd12s015_in: endpoint@0 {
+ remote-endpoint = <&hdmi_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ tpd12s015_out: endpoint@0 {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+ };
+ };
+ };
+
+ hdmi0: connector@1 {
+ compatible = "hdmi-connector";
+ label = "hdmi";
+
+ type = "a";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&tpd12s015_out>;
+ };
+ };
+ };
+};
+
+&omap4_pmx_core {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &dss_dpi_pins
+ &tfp410_pins
+ &dss_hdmi_pins
+ &tpd12s015_pins
+ &hsusbb1_pins
+ >;
+
+ twl6040_pins: pinmux_twl6040_pins {
+ pinctrl-single,pins = <
+ 0xe0 (PIN_OUTPUT | MUX_MODE3) /* hdq_sio.gpio_127 */
+ 0x160 (PIN_INPUT | MUX_MODE0) /* sys_nirq2.sys_nirq2 */
+ >;
+ };
+
+ mcpdm_pins: pinmux_mcpdm_pins {
+ pinctrl-single,pins = <
+ 0xc6 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_ul_data.abe_pdm_ul_data */
+ 0xc8 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_dl_data.abe_pdm_dl_data */
+ 0xca (PIN_INPUT_PULLUP | MUX_MODE0) /* abe_pdm_frame.abe_pdm_frame */
+ 0xcc (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_lb_clk.abe_pdm_lb_clk */
+ 0xce (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */
+ >;
+ };
+
+ mcbsp1_pins: pinmux_mcbsp1_pins {
+ pinctrl-single,pins = <
+ 0xbe (PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
+ 0xc0 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dr.abe_mcbsp1_dr */
+ 0xc2 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dx.abe_mcbsp1_dx */
+ 0xc4 (PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
+ >;
+ };
+
+ dss_dpi_pins: pinmux_dss_dpi_pins {
+ pinctrl-single,pins = <
+ 0x122 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data23 */
+ 0x124 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data22 */
+ 0x126 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data21 */
+ 0x128 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data20 */
+ 0x12a (PIN_OUTPUT | MUX_MODE5) /* dispc2_data19 */
+ 0x12c (PIN_OUTPUT | MUX_MODE5) /* dispc2_data18 */
+ 0x12e (PIN_OUTPUT | MUX_MODE5) /* dispc2_data15 */
+ 0x130 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data14 */
+ 0x132 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data13 */
+ 0x134 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data12 */
+ 0x136 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data11 */
+
+ 0x174 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data10 */
+ 0x176 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data9 */
+ 0x178 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data16 */
+ 0x17a (PIN_OUTPUT | MUX_MODE5) /* dispc2_data17 */
+ 0x17c (PIN_OUTPUT | MUX_MODE5) /* dispc2_hsync */
+ 0x17e (PIN_OUTPUT | MUX_MODE5) /* dispc2_pclk */
+ 0x180 (PIN_OUTPUT | MUX_MODE5) /* dispc2_vsync */
+ 0x182 (PIN_OUTPUT | MUX_MODE5) /* dispc2_de */
+ 0x184 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data8 */
+ 0x186 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data7 */
+ 0x188 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data6 */
+ 0x18a (PIN_OUTPUT | MUX_MODE5) /* dispc2_data5 */
+ 0x18c (PIN_OUTPUT | MUX_MODE5) /* dispc2_data4 */
+ 0x18e (PIN_OUTPUT | MUX_MODE5) /* dispc2_data3 */
+
+ 0x190 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data2 */
+ 0x192 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data1 */
+ 0x194 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data0 */
+ >;
+ };
+
+ tfp410_pins: pinmux_tfp410_pins {
+ pinctrl-single,pins = <
+ 0x144 (PIN_OUTPUT | MUX_MODE3) /* gpio_0 */
+ >;
+ };
+
+ dss_hdmi_pins: pinmux_dss_hdmi_pins {
+ pinctrl-single,pins = <
+ 0x5a (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */
+ 0x5c (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_scl.hdmi_scl */
+ 0x5e (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_sda.hdmi_sda */
+ >;
+ };
+
+ tpd12s015_pins: pinmux_tpd12s015_pins {
+ pinctrl-single,pins = <
+ 0x22 (PIN_OUTPUT | MUX_MODE3) /* gpmc_a17.gpio_41 */
+ 0x48 (PIN_OUTPUT | MUX_MODE3) /* gpmc_nbe1.gpio_60 */
+ 0x58 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* hdmi_hpd.gpio_63 */
+ >;
+ };
+
+ hsusbb1_pins: pinmux_hsusbb1_pins {
+ pinctrl-single,pins = <
+ 0x82 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */
+ 0x84 (PIN_OUTPUT | MUX_MODE4) /* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */
+ 0x86 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dir.usbb1_ulpiphy_dir */
+ 0x88 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt */
+ 0x8a (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0 */
+ 0x8c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1 */
+ 0x8e (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2 */
+ 0x90 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3 */
+ 0x92 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4 */
+ 0x94 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5 */
+ 0x96 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6 */
+ 0x98 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7 */
+ >;
+ };
+
+ i2c1_pins: pinmux_i2c1_pins {
+ pinctrl-single,pins = <
+ 0xe2 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */
+ 0xe4 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */
+ >;
+ };
+
+ i2c2_pins: pinmux_i2c2_pins {
+ pinctrl-single,pins = <
+ 0xe6 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */
+ 0xe8 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */
+ >;
+ };
+
+ i2c3_pins: pinmux_i2c3_pins {
+ pinctrl-single,pins = <
+ 0xea (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */
+ 0xec (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */
+ >;
+ };
+
+ i2c4_pins: pinmux_i2c4_pins {
+ pinctrl-single,pins = <
+ 0xee (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */
+ 0xf0 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */
+ >;
+ };
+
+ /*
+ * wl12xx GPIO outputs for WLAN_EN, BT_EN, FM_EN, BT_WAKEUP
+ * REVISIT: Are the pull-ups needed for GPIO 48 and 49?
+ */
+ wl12xx_gpio: pinmux_wl12xx_gpio {
+ pinctrl-single,pins = <
+ 0x26 (PIN_OUTPUT | MUX_MODE3) /* gpmc_a19.gpio_43 */
+ 0x2c (PIN_OUTPUT | MUX_MODE3) /* gpmc_a22.gpio_46 */
+ 0x30 (PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_a24.gpio_48 */
+ 0x32 (PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_a25.gpio_49 */
+ >;
+ };
+
+ /* wl12xx GPIO inputs and SDIO pins */
+ wl12xx_pins: pinmux_wl12xx_pins {
+ pinctrl-single,pins = <
+ 0x38 (PIN_INPUT | MUX_MODE3) /* gpmc_ncs2.gpio_52 */
+ 0x3a (PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */
+ 0x108 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */
+ 0x10a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */
+ 0x10c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */
+ 0x10e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */
+ 0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat2.sdmmc5_dat2 */
+ 0x112 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3.sdmmc5_dat3 */
+ >;
+ };
+};
+
+&omap4_pmx_wkup {
+ led_wkgpio_pins: pinmux_leds_wkpins {
+ pinctrl-single,pins = <
+ 0x1a (PIN_OUTPUT | MUX_MODE3) /* gpio_wk7 */
+ 0x1c (PIN_OUTPUT | MUX_MODE3) /* gpio_wk8 */
+ >;
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+
+ clock-frequency = <400000>;
+
+ twl: twl@48 {
+ reg = <0x48>;
+ /* IRQ# = 7 */
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
+ };
+
+ twl6040: twl@4b {
+ compatible = "ti,twl6040";
+ reg = <0x4b>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&twl6040_pins>;
+
+ /* IRQ# = 119 */
+ interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
+ ti,audpwron-gpio = <&gpio4 31 GPIO_ACTIVE_HIGH>; /* gpio line 127 */
+
+ vio-supply = <&v1v8>;
+ v2v1-supply = <&v2v1>;
+ enable-active-high;
+ };
+};
+
+#include "twl6030.dtsi"
+#include "twl6030_omap4.dtsi"
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+
+ clock-frequency = <400000>;
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins>;
+
+ clock-frequency = <100000>;
+
+ /*
+ * Display monitor features are burnt in their EEPROM as EDID data.
+ * The EEPROM is connected as I2C slave device.
+ */
+ eeprom@50 {
+ compatible = "ti,eeprom";
+ reg = <0x50>;
+ };
+};
+
+&i2c4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_pins>;
+
+ clock-frequency = <400000>;
+};
+
+&mmc1 {
+ vmmc-supply = <&vmmc>;
+ bus-width = <8>;
+};
+
+&mmc2 {
+ status = "disabled";
+};
+
+&mmc3 {
+ status = "disabled";
+};
+
+&mmc4 {
+ status = "disabled";
+};
+
+&mmc5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&wl12xx_pins>;
+ vmmc-supply = <&wl12xx_vmmc>;
+ non-removable;
+ bus-width = <4>;
+ cap-power-off-card;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1271";
+ reg = <2>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* gpio 53 */
+ ref-clock-frequency = <38400000>;
+ };
+};
+
+&emif1 {
+ cs1-used;
+ device-handle = <&elpida_ECB240ABACN>;
+};
+
+&emif2 {
+ cs1-used;
+ device-handle = <&elpida_ECB240ABACN>;
+};
+
+&mcbsp1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcbsp1_pins>;
+ status = "okay";
+};
+
+&mcpdm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcpdm_pins>;
+ status = "okay";
+};
+
+&twl_usb_comparator {
+ usb-supply = <&vusb>;
+};
+
+&uart2 {
+ interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
+ &omap4_pmx_core OMAP4_UART2_RX>;
+};
+
+&uart3 {
+ interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
+ &omap4_pmx_core OMAP4_UART3_RX>;
+};
+
+&uart4 {
+ interrupts-extended = <&wakeupgen GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
+ &omap4_pmx_core OMAP4_UART4_RX>;
+};
+
+&usb_otg_hs {
+ interface-type = <1>;
+ mode = <3>;
+ power = <50>;
+};
+
+&usbhshost {
+ port1-mode = "ehci-phy";
+};
+
+&usbhsehci {
+ phys = <&hsusb1_phy>;
+};
+
+&dss {
+ status = "ok";
+
+ port {
+ dpi_out: endpoint {
+ remote-endpoint = <&tfp410_in>;
+ data-lines = <24>;
+ };
+ };
+};
+
+&dsi2 {
+ status = "ok";
+ vdd-supply = <&vcxio>;
+};
+
+&hdmi {
+ status = "ok";
+ vdda-supply = <&vdac>;
+
+ port {
+ hdmi_out: endpoint {
+ remote-endpoint = <&tpd12s015_in>;
+ };
+ };
+};
Code Review / kvmfornfv.git / blobdiff